View allAll Photos Tagged custompc
This is a shot of the LCD Screen side naked with the external shell off.
It is also visible the side of the GPU cooler that is usually hidden and how the GPU cables run inside it.
right below the LCD frame you can see the Arctic eSpoorts One 33 CPU cooler noticeable by it's thin yellow line present on its Fan
They are my duo for the #CMWS20, it took a lot of work but I love 'em.
Made by Jean R built
The project is visible on build.gg
You can check the full build logs on the Cooler Master and bit-tech forums, or my Youtube channel to see the making of Leetfoot and other projects
We're working some new finishes for our range of PCs, will keep you posted ;) #n3xuscomputing #technology #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #battlestation #pcgoals
The boxes for the parts in my first custom desktop PC build, Astaroth. You can tell I'm not joking around with the hardware here.
The adapter cable in front of the graphics card turned out to be the wrong cable. It was planned to be used for the front panel USB 2.0 ports, but this was actually a 2.0 to 3.0 adapter and not a 3.0 to 2.0 adapter. I wound up getting a different cable on Amazon to address this issue.
This shot probably best shows the thinking behind wanting to get the cooling components largely out of the main case. The tubing, pump and radiator were all mounted on the outside as supposed to the customary inside. My thinking on this was simple.. Why have components designed to cool the water mounted in an essentially hot envioroment? Get them outside in the free air. Seemed to work well as the water temp was regularly around the 30-34C mark under load (un-clocked). I was particularly pleased with the appearance of the way the tubing exited the case in an unusual way to connect to the major components. Shades of Megadeth anyone?..
Awesome monitor wall! Credit: PizzaRanch420 #n3xuscomputing #technology #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #battlestation #pcgoals
Here you can see how the cables run beside the storage frame, and how this side looks "naked" without the shell, I finished and took care even of the parts hidden with the case fully assembled.
The Samsung 860EVO SSD is clearly visible.
Below the carbon fibre layer of the storage frame there is a WD blue HDD.
They are my duo for the #CMWS20, it took a lot of work but I love 'em.
Made by Jean R built
The project is visible on build.gg
You can check the full build logs on the Cooler Master and bit-tech forums, or my Youtube channel to see the making of Leetfoot and other projects
Everything inside in orgasmatron that could be modded, was modded. And as such the rear housing for the pump was made from a chromed cap for a domestic light pull switch, then drilled vents in the top to allow heat dissipation. Much nicer than the standard blue barrel on the back of the pump.
Staff Build: Adam's custom Half Life system. #n3xuscomputing #buildapc #custompc #gaming #gamingpc #desktop #computer #pcmasterrace #parvum
Think outside of the box ...⠀⠀ ⠀⠀ repost from : @alphacustom⠀⠀ ⠀⠀ #n3xuscomputing #technology #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #pcgoals #officialsetups #battlestation
Gotta love some close up braiding :) This is from one of our staff members own PC, Taylor. #n3xuscomputing #tech #buildapc #custompc #gaming #gamingpc #desktop #computer #pcmasterrace
Photo series: Life in the PC Master Race #PCGoals #n3xuscomputing #tech #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #battlestation Credit: Reddit user dytigas
Fitting of the radiator and fans. #n3xuscomputing #tech #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #battlestation #pcgoals
Danger Den TDX copper base block for the CPU and a DD Maze 4 for the GPU were used.
I would have preferred the silver base versions but I was well over budget by now..
The optical drive bays had a custom cut acrylic overlay as did much of the front face.
These were laser cut and then engraved to my specification.
You can see behind a smearing of Araldite which I used to hold them on which in hind sight was a bad idea as it shew through the front, sadly it was too late at this point and I just had to put up with that.
2 x SATA Plextor DVD/RW drives were the optical drives of choice and at the time just about the best thing out there. The eject buttons relied purely on the flexibility of the acrylic to activate them which I thought was a nice touch. Another small oversight here, you may notice the emergency tray release holes were not available for use which was a real pain if you needed them as the front of the case had to come off first!
His and Hers natural setup Credit: @milkyesquire #n3xuscomputing #technology #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #battlestation #pcgoals
Corsair build internal details...⠀ ⠀ ⠀ #n3xuscomputing #technology #buildapc #custompc #gaming #gamingpc #pcgaming #desktop #computer #pcmasterrace #pcgoals #officialsetups #battlestation #corsair #msi #asus #desksetup #geforce #watercooled #gamingpc #setupwars #custompc #lit #intel #amd #overclocked