View allAll Photos Tagged capable
The Theresian Military Academy was under Maria Theresa on 14 December 1751 with the mission "Make he me thereof capable officers and righteous men" to the first commander Field Marshal Leopold Joseph of Daun founded and is, thus, the oldest active uninterruptedly the officer training dedicated Military Academy of the World. Memorable is that the building since 1752 - except for the years of occupation, war and destruction due to the Third Reich - uninterruptedly hosted the Military Academy, while the Royal Military Academy Woolwich, founded in 1741, was closed in 1939. The Royal Military Academy Sandhurst, founded in 1947, only from a sentimental point of view continues the tradition of its predecessor academy. In Wiener Neustadt, in contrast, were admitted since 1752 almost without interruption per year 100 nobles and 100 commoners. The officers of the Austria-Hungarian army as well were to 1918 formed here.
The term military academy it wears since the unification with the nursery of Cadets in 1769. Already in 1771 appeared a by local director lieutenant field marshal Johann Georg Carl Freiherr von Hannig elaborated regulated curriculum and 1775 the by Maria Theresa sanctioned Academy Regulations. The training period at that time was eleven years and was gradually reduced to three years.
The famous Styrian Archduke Johann of Austria was 44 years (1805-1849) Chief Executive Officer of Theresian Military Academy.
In the First Republic, the training was to 1934 performed in Enns (Upper Austria) and then again in Wiener Neustadt. A special feature in the time between the Austrofascism and the Annexation is the refusal of Major General Rudolf Towarek (1933-1938 Commander of the Military Academy), to hand over the castle to German Wehrmacht which had just invated Austria. He had the guard paraded with fixed bayonet and so refused the Wehrmacht several days admission to the castle. This act had until his retirement no negative impacts on Major General Towarek, he even obtained permission to continue to wear the Austrian uniform after his retirement.
By Colonel Erwin Rommel, later Field Marshal, immediately after the Annexation a training school for officer training was set up which he at the beginning also directed himself. To the school the Daun barracks was added.
Towards the end of World War II, the castle was almost completely destroyed by bombs, fires and looting. It burned in April and May 1945 within almost 14 days completely down. The remaining ruins were in the reconstruction in the years 1946 to 1959 restored to its historical form, the interior, however, adapted to current requirements. So the military academy was able to resume operations in the year 1958.
Main portal of the Theresian Military Academy
After the founding of the Armed Forces in 1955, the Military Academy was housed again until 1958 in Enns, from where it subsequently moved back to the castle of Wiener Neustadt, that after the damages caused by the Second World War had been repaired.
In Vienna Museum of Military History, the campaign streamer of the first flag of the military academy is set up. It was donated by Maria Theresia just before her death in 1780 for the first flag, supposedly she should have embroidered it personally. Under the banner ribbon there are two paintings (gouaches) of Bernhard Albrecht (1758-1822). Albrecht was an art teacher at the Military Academy and he also depicted the pupils in their military and athletic exercises. So show the images scenes as "target practice with mortars" and "balancing exercises of cadets at the high balance beam". The sheets have emerged 1785-1793.
The current commander is Brigadier Karl Pronhagl.
Die Theresianische Militärakademie wurde unter Maria Theresia am 14. Dezember 1751 mit dem Auftrag „Mach’ er mir tüchtige Offiziere und rechtschaffene Männer darauß“ an den ersten Kommandanten Feldmarschall Leopold Joseph von Daun gegründet und ist somit die älteste aktive, durchgängig der Offiziersausbildung gewidmete Militärakademie der Welt. Denkwürdig ist, dass das Gebäude seit 1752 – mit Ausnahme der Okkupations- Kriegs- und Zerstörungsjahre in Folge des Dritten Reiches durchgängig die Militärakademie beherbergte, wogegen die 1741 gegründete Royal Military Academy Woolwich 1939 geschlossen wurde. Die Royal Military Academy Sandhurst, gegründet 1947, setzt nur in ideeller Hinsicht die Tradition ihrer Vorgängerakademie fort. In Wiener Neustadt wurden dagegen seit 1752 fast durchgängig pro Jahr je 100 Adelige und 100 Bürgerliche aufgenommen. Auch die Offiziere der Österreich-Ungarischen Armee wurden bis 1918 hier ausgebildet.
Die Bezeichnung Militärakademie trägt sie seit der Vereinigung mit der Pflanzschule für Kadetten im Jahr 1769. Bereits 1771 erschien ein vom Lokaldirektor Feldmarschalleutnant Johann Georg Carl Freiherr von Hannig ausgearbeiteter geregelter Studienplan und 1775 das von Maria Theresia sanktionierte Akademie-Reglement. Die Ausbildungszeit betrug damals elf Jahre und wurde schrittweise auf drei Jahre verkürzt.
Der berühmte steirische Erzherzog Johann von Österreich war 44 Jahre (von 1805 bis 1849) Oberdirektor der Theresianischen Militär-Akademie.
In der ersten Republik wurde die Ausbildung bis 1934 in Enns durchgeführt und anschließend wieder in Wiener Neustadt. Eine Besonderheit in der Zeit zwischen dem Austrofaschismus und dem Anschluss ist die Weigerung des Generalmajors Rudolf Towarek (1933–1938 Kommandant der Militärakademie), die Burg der in Österreich einmarschierten deutschen Wehrmacht zu übergeben. Er ließ die Wache mit aufgepflanzten Bajonett aufmarschieren und verweigerte so der Wehrmacht mehrere Tage den Zutritt zur Burg. Diese Tat hatte bis auf seine Pensionierung keine negativen Auswirkungen auf Generalmajor Towarek, er erhielt sogar die Erlaubnis, nach seiner Pensionierung weiterhin die österreichische Uniform zu tragen.
Von Oberst Erwin Rommel, dem späteren Generalfeldmarschall, wurde unmittelbar nach dem Anschluss eine Kriegsschule für die Offiziersausbildung eingerichtet, die er anfangs auch selbst leitete. Zu der Schule kam auch die Daun-Kaserne dazu.
Gegen Ende des Zweiten Weltkriegs wurde die Burg durch Fliegerbomben, Brände und Plünderungen fast vollkommen zerstört. Sie brannte im April und Mai 1945 innerhalb von fast 14 Tagen restlos aus. Die übrig gebliebene Ruine wurde beim Wiederaufbau in den Jahren 1946 bis 1959 in ihrer historischen Form wiederhergestellt, das Innere jedoch den zeitlichen Erfordernissen angepasst. So konnte die Militärakademie im Jahr 1958 ihren Betrieb wieder aufnehmen.
Hauptportal der Theresianischen Militärakademie
Nach der Gründung des Bundesheeres im Jahr 1955 war die Militärakademie nochmals bis 1958 in Enns untergebracht, von wo sie anschließend wieder in die Burg von Wiener Neustadt übersiedelte, nachdem die Beschädigungen durch den Zweiten Weltkrieg behoben worden waren.
Im Wiener Heeresgeschichtlichen Museum ist das Fahnenband der ersten Fahne der Militärakademie ausgestellt. Es wurde von Maria Theresia knapp vor ihrem Tod 1780 für die erste Fahne gestiftet, angeblich soll sie es persönlich bestickt haben. Unter dem Fahnenband befinden sich zwei Bilder (Gouachen) von Bernhard Albrecht (1758–1822). Albrecht war Zeichenlehrer der Militärakademie und schilderte auch die Zöglinge bei ihren militärischen und sportlichen Übungen. So zeigen die Bilder Szenen wie „Übungsschießen mit Mörsern“ und „Balancierübungen der Kadetten auf dem hohen Balkensteg“. Die Blätter sind zwischen 1785 und 1793 entstanden.
Der aktuelle Kommandant ist Brigadier Karl Pronhagl.
My cameraphone seems to be capable of taking only blurry photos, but this is one of two products (the other being a 30-page paper--57 after the references, appendices, tables, and figures!) of nine months of work. Why so long? All of the graduate students in my program do both a first-year project and a thesis, so this would be my first-year project. I investigated the effects of prior mental health service usage and prior criminal behavior on attitudes toward mental health services. The poster is for a sort of mini-conference my college holds so that the undergraduate and graduate psychology students can display their work and answer questions about it. I think this is the first time I've been truly excited about and proud of my research work. Quite a good feeling :)
Grey Eagle - Hypersonic Bomber Mach 8 - 10, IO Aircraft www.ioaircraft.com
Length: 150'
Span: 71'
Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle)
1 Air Breathing Aerospike
Fuel: Kero / Hydrogen
Payload: Up 36 2,000 LBS JDAM's, or 80,000 LBS
Range: 10,000nm + Aerial Refueling Capable
www.ioaircraft.com/hypersonic.php
-----------------------------
hypersonic bomber, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjetdefense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, air force of science and research,
-----------------------------
Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.
Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.
Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.
-------------
Advanced Additive Manufacturing for Hypersonic Aircraft
Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.
Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.
*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.
What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.
Unified Turbine Based Combined Cycle (U-TBCC)
To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5
However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.
Enhanced Dynamic Cavitation
Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.
Dynamic Scramjet Ignition Processes
For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.
Hydrogen vs Kerosene Fuel Sources
Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.
Conforming High Pressure Tank Technology for CNG and H2.
As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.
As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).
Enhanced Fuel Mixture During Shock Train Interaction
Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.
Improved Bow Shock Interaction
Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.
6,000+ Fahrenheit Thermal Resistance
To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.
*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope
Scramjet Propulsion Side Wall Cooling
With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.
Lower Threshold for Hypersonic Ignition
Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.
Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities
Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.
Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)
To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.
A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.
Intended to be capable of off-road use, the G4 had twin rear axles and a 5-litre engine. Only 57 were built; this is one of three authentic survivors and has been associated with Adolf Hitler as there are many newsreel films and photos showing him travelling in one of these cars.
Atmospheric-capable Forge fighter enhanced with salvaged Komplex tech for superior speed and maneuverability.
The Peacekeeper is often deployed as a first response interceptor on distant human-colonized worlds.
Built by the Schiffswerks Rieherst company in Hamburg, the Umbria was launched on December 30th 1911 with the name of Bahia Blanca. It was a large freighter by that time, 150 meters long, with a power capable of providing a speed of 14 knots that could carry 9,000 tons of cargo and up to 2,000 passengers. In 1912 it began operating the Hamburg-America line doing different jobs between Europe and Argentina until the outbreak of World War I, when it was based in Buenos Aires. In 1918 the ship was acquired by the Argentinian government and it was not until 1935 when the ship was taken over by the Italian government and renamed again: the Umbria. From that moment its trips were to transport troops and during the following two years carried several thousand soldiers to the Italian colonies in East Africa.
The loss of the Umbria
In May 1940, when Italy was still neutral in World War II, the Umbria was secretly loaded with 360,000 bombs between 15 kg and 100 kg, 60 boxes of detonators, building materials and three Fiat Lunga cars, carrying a total 8,600 tons of weapons towards the East Africa. The explosives had destination Massawa and Assab, Eritrea, that was Italian colony by then, and the rest of the cargo was heading different locations in Asia. Italy's entry into the war was imminent and this shipment was destined to the defense of the colonies against the Allies and to the possible expansion of its African territories.
On 3rd June 1940 the Umbria reached Port Said, northern Egypt, where loaded with 1,000 tons of coal and water in a movement to fool the Allies, trying to look like a harmless freighter. The port, controlled by the Royal Navy, and its authorities allowed the ship enter on the Red Sea three days after arrival. The British delayed the departure of the Umbria knowing that Italy's entry into the war was imminent and that the cargo of Umbria had devastating power that sooner or later would be used against the Allies and why not, to get a great load to fight fascism. But Italy, as a neutral country that it was, had every right to transport weapons much like any other cargo to its colonies.
Having met the deadline to be retained, the Umbria crossed the Suez Canal on June 6th but with the escort of the HMS Grimsby. The importance and destructive capacity of the cargo required it. Three days later the Umbria entered in Sudan waters and the HMS Grimsby ordered the Umbria captain to anchor on Wingate Reef under the pretext of searching for contraband. Moments later the British warship HMS Leander arrived with a group of 20 sailors who boarded the Umbria. After thoroughly searching the ship and finding nothing, the captain ordered the British troops to remain the night aboard the Umbria.
The next morning Lorenzo Muiesan, Umbria captain, was in his cabin listening to the radio when Mussolini announced the entry of Italy into the World War II. Hostilities would begin at midnight of that day. Muiesan, a very patriotic captain with long experience, was the only one in the area who had heard the news and knew immediately that both Umbria and the burden would be used by the Allies against their own country. He had no option to disable both. In a move of extraordinary intelligence, as the hours passed retained by the British who did not yet know that Italy was officially the enemy, the captain ordered his crew conducting a rescue simulation... that was more real than the British thought. This maneuver, which the English soldiers agreed as they believed it would serve to further delay the departure of the Umbria. While the Italians occupied the lifeboats, the chief engineers, following Muiesan´s orders, opened all the valves and drown the ship to the bottom of the reef. With the crew safe, the British only had time to get on their ship and watch the freighter slid slowly.
When the captain of HMS Grimsby asked why he had done that Muiesan confirmed the declaration of war from Italy to Britain. The next day Muiesan and the rest of Umbria crew departed detainees to India, where they spent four years in prison.
CARGO:
The Umbria was carrying 360,000 individual aircraft bombs ranging in size from 15, 50 and 100 kg. The vessel also carried a large quantity of fuses, ammunition and detonators as well as other traditional cargo. The captain knew these bombs would be confiscated and used by the enemy against his country should they ever discover them which was why he made the call to sink the ship.
The Umbria had sailed in June 1940 with 6,000 tons of bombs, 60 boxes detonators, explosives, weapons and three Fiat 1100 Lunga from Genoa via Livorno and Naples in the Suez Canal and on the way via Massaua and Assab to Calcutta.
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
KABUL, Afghanistan - (June 2, 2012) Afghan National Police (ANP) in cooperation with a local women’s high school, refereed a volleyball tournament between women’s teams at a Kabul high school, June 2.
The ANP is reaching out to the community in a campaign to familiarize the Afghan people with the police force.
NTM-A is a coalition of 38 troop-contributing nations charged with assisting the Government of the Islamic Republic of Afghanistan in generating a capable and sustainable Afghan National Security Force ready to take lead of their country's security by 2014. For more information about NTM-A, visit www.ntm-a.com.
U.S. Navy photo by Mass Communication Specialist 2nd Class Scott A. Buchholz
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
NEOBALLS / ZEN MAGNETS - Neodymium Magnetic Balls (@4205) - Starcraft II's Massive Thor
This is my most complex and largest build to date.
It was designed in parts: Cockpit body, then legs, then arms, then rear guns. Then I had to redesign parts when it came time to assemble it together because of incorrect bonding assumptions and misalignment of magnet fields.
Experimented with x-beam coupled bonds to get the maximum lateral strength with reinforcements on the sides. This proved to be very string. Created a X-Beam using similar methods producing a very strong leg structure. It was capable of support the entire weight of the cockpit body w/o a problem. Had to redesign the leg to cockpit body mount point from the earlier concept because the bond was not completely coupled.
Next up were the arm/guns ... the weight was too much for the cockpit body to support so I fashioned a pair of lego-platforms for them to rest on and take the weight off of the central body.
Finally ... the rear guns ... these were a challenge in that their original mount point design had to be reworked also to make them fit correctly into the rear of the cockpit body. I changed the mount points on the guns to fit the space on both sides and added a few support balls to improve the mount point bonds. I was very surprised how they were balanced and supported only by two point sections to the body. The guns stayed in place for a small series of photos.
The design flaw was in the side bonds of the beam to the legs. The coupled field held nicely for a short amount of time and would have held if it didn't have the weight of the rear guns to support. When they were standing upright and straight, all was good. As soon as I attempted to move the platform forward (to take a video), the rear guns tilted slightly backwards and and that was the end of the leg to body support bonds ... and created the dreaded implosion.
The rear gun weight caused the entire central body section to rotate backwards and fall back on the rear guns ... taking the arms in the process. Perhaps I should have created a Lego-support structure for the rear guns to remove the pendulum force backwards ... but that would have created another view blocker like the side Lego-platforms obstructed the view of the legs and feet. Not sure if I can recreate it for a rotational video ... this took over a week (on/off to design and assemble).
Overall ... I was very happy with the result ... hope I captured enough detail to warrant some visual recognition as a Starcraft II Thor reproduction/interpretation.
This was design and built for the Zen Magnets Contest 26: The Massive Thor
www.zenmagnets.com/blog/26-the-massive-thor/
I tried to document the info for this super complex build (below) accompanied by associated pics in this set
www.flickr.com/photos/tend2it/sets/72157632920071597/
Starcraft II Thor Magnet Count and Detail Talley
======+================
Cockpit Body bottom section: (@0520)
(@0217) - Main shape middle core = (2x108) + 1
(@0095) - central bottom layer 1 = (47x2) + 1 w/black parameter
(@0078) - Sides Bottom layer 2 = (2x(22 parallel pair frnt2bck support + 3 red + 4 gold + 10 ring outside black))
(@0028) - Central bottom layer 3 = (2x14) rectangle
(@0032) - Sides bottom layer 3 = (2x((2x5 parallel bridge rectangle to ring) + (6 ring outside))
(@0010) - Central bottom layer 4 = (10 ring) leg waist w/gold
(@0020) - Sides bottom layer 4 = (2x10 ring) coupled over parallel bridge for perpendicular underside support
(@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end)
------
Cockpit Body top section (from center out): (@0371)
(@0166) - top layer 1 = (2x83) w/black missle cover + middle sect separator
(@0105) - top layer 2 = ((2x52) + 1) w/black separator, red trim, gold cockpit
(@0083) - top layer 3 = ((2x41) + 1) w/black separator, red trim, gold cockpit
(@0037) - top layer 4 = ((2x18) + 1) w/black separator trim
(@0010) - top layer 5 = (2x5) w/red/black
------
(@0891)
Leg section x2 (@0640 - 12 removed from bottom of @ leg for foot contact pt)
leg internal structure:
(@0384) - columns = 2 x (4x((2x12) + ((2x11) + 2))) top/bottom coupled bonds w/parallel bonds stacked x 4))
(@0096) - side reinforcements = 2x((2x11) + 2) coupled pair along outside edge centers)
(@0032) - ball reinforcements = 2x(2x4 balls are two balls added to 4 ball in 2, 4, 6, 8th positions) - (12 @ bottom)
leg arch structure (connected to one flat leg top face:
(@0128) - (4x4 parallel sqr) + (2x(6 + 2)) pointy rings) + (4x4 parallel sqr) + (2x(6 + 2)) pointy rings)
Place the two leg arch structures together to form the leg arch
-------
(@1519) = 1531-12
Leg side panels (@0384)
(@0344) - (2 each leg x (2x(2x43 each side))) w/black outside trim
Knees + Leg detail
(@0040) - (2x(2x(6 + 2) knee w/red sqr) + 2x(4 red sqr top of leg))
-------
(@1903)
Feet x2 (@0242)
(@0184) - (2x((2x7 + 2 1st mid layer) + (2x(2x10 + 1) 2nd mid layer) + ((2x(2x8 + 1) outside layer))
(@0034) - (2x(2x(2x3 + 1 top of toe 2 leg)) + (1 center rear foot 2 leg conn) + (2 x 1 outer rear foot sides 2 leg
conn))
(@0024) - (2x(2x6 rings rear foot heel))
-------
(@2145)
X-Beam waist platform - (@0233 - 19) this part is placed across the center perpendicular to the x-beam leg arch
(@0214) - (2x(2x(18 + 17 + 6 + 3)) + (2x(7 + 2)) + ((8 + 1 front side) + (2x9 rear side)) + ((2 x 3 red front center) +
(2 x 2 red front sides) + (2 red rear)) - (19 removed under rear panel side to fold)
Arm Guns (2 pair per arm w/red + black accents)
(@0380) - (4x((4x9 center core) + (3x((2x7) + 1)) top/sides) + (2x7) middle join))
Shoulder to elbow core w/o reinforcements ((@0174)per arm)
(@0348) - (2 x (top((2x5)+2) + (4x8+2 parallel) + ((2x5)+2) + (2x5) + (2x(2x5)+1) + (2x(2x6)+1) + ((4x7)+2 parallel
mount2gun) + (1 ball center to bridge below 2 ball center to 1 ball) + ((2x6)+1) + ((2x4)+2)bottom)
Shoulder to elbow (per arm, per side)
(@0248) - (2 x (2 x (top 3 + 5 + 5 + 5 + 4 + 5 + 4 + 4 + 5 + (2x7arm2shoulder bridge) + (5 + 3 bottom))
Elbow to gun support (per arm, per side) (@0140 - 18 for outside facing side revamp)
(@0122) - (2 x (2 x (((2x9)+1) + (2x8)) -
Revamp outside facing sides for Z bracket (remove 2x(4 top/4 bottom/2 middle/move center ball down, add 1 ball)
Revamp 2 rear centerballs with red
(@028) - add red design outside facing shoulder 2 elbow
------
(@3485)
Rear Guns x2
Large cannon (@0112 each)
(@0224) - 2 x ((2x(2x15) + (4x(5+2)) + (4x(6 ring)))
Smaller cannon (@0092 each)
(@0184) - 2 x ((2x(2x13) + (4x(4+2)) + (4x(4 ring)))
Gun bridges (@0010 each)
(@0020) - (2 x (4 ring + 6 ring across two cannons)
Gun mounts x2
(@0104) - (2 x ((top (2x4+2) + (2x5+2) parallel to existing + (2x4+2) + (2x5 parallel) + (2x4+2) bottom)
Gun panel x 2 (@0102 each)
(@0204) - (2 x (2x(11 + 10 + 9 + 8 + 7 + 6))
-------
Revamp base
(@4221) subtotal b4 assembly
Assembly mods
-------------
Moved the (@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end) below the rear of the body between
the leg mount and cockpit body. Actually used the barrel as a mount point for the rear guns.
Modded Cockpit Body bottom section (mount point):
(@0020) = (2 x (7 + 6 + 5)) = Changed = (@0028) - Central bottom layer 3 = (2x14) rectangle to covert parallel
rectangle to hex parallel center, coupled sides
-------
(@4213) = (@4221 - 8)
Moved central bottom layer x-beam
(@0018) = (2x09 ring) = Changed = (@0020) - Sides bottom layer 4 = shifted it down one row, removed 1 ball on end to form point and pinched outside end fit in center of 6 ball side.
(@4211) = (@4213 - 2)
Removed gold 10 ball ring mount
Changed = (@0010) = Central bottom layer 4 = (10 ring) leg waist w/gold
-------
(@4201) = (@4213 - 10)
Modded Rear Guns
(@0100) = Changed = Rear Gun mounts x2 - removed +2 from top/bottom mount point (2x4+2)=>(2x4)
(@4197) = (@4201-4)
Added extra mount point support bwtween rear gun mounts and rear cockpit body
(@4205) = (@4201+8)
Grand Total! = (@4205)
The capable mass of concrete and steel joists is looking somewhat aged but holding together perfectly well in spite of abandonment. The same cannot be said for the frail iron staircases which allow access to the upper levels! Many of the steps are somewhat warped, and the whole frame creaks disconcertingly. Thankfully the old trick of carefully distributing one's weight to the metal bolts at the side of the stairs did the trick, and they held up without too much complaining.
With many navies developing more and more powerful and capable armored cruisers around the world, the Vinnish navy sought to make sure their next cruiser would be able to compete. At first, the Sumpflands were to have a conventional layout, with just two main gun turrets. Then, that changed to three, then four. The problem with this then was the question, how much value do more guns have when they can't all train on the same target? An ingenious, albeit controversial and mechanically and practically questionable solution was engineered to solve this problem.
The turrets would be able to physically traverse across the deck to the opposite side to attain an optimal firing position. This was achieved via rails laid into grooves across the deck. The turret would unlatch from its barbette, slide across the deck, and anchor itself to a port on the opposite side. After firing, the recoil would assist in throwing the turret back along the track to its barbette, where it would lock back in place to reload and prepare to travel again. Although somewhat simple on paper, in practice this system proved to be complex, maintenance intensive, and vulnerable to catastrophic failure in battle. A well-placed hit could blow a turret right off of its barbette, or jam it into place and prevent it from traversing or traveling. However, despite these complications, the idea was actually implemented on the lead ship of the class. It remains to be seen whether this unique innovation will be of benefit or detriment to the Vinnish navy in combat.
This photograph shows what a full port broadside would look like, with the starboard side turret "slid" into position.
PERKS & QUIRKS:
Guns: 9" (+1)
Armor: 7in (+2)
Speed: 18kn (-1)
Range: 9000km (-1)
Torpedo Tubes: 2 (-1)
Cliffe's Sliding Gun Turret: +3
Mechanically Complex: -1
Very High Maintenance: -2
Built by the Schiffswerks Rieherst company in Hamburg, the Umbria was launched on December 30th 1911 with the name of Bahia Blanca. It was a large freighter by that time, 150 meters long, with a power capable of providing a speed of 14 knots that could carry 9,000 tons of cargo and up to 2,000 passengers. In 1912 it began operating the Hamburg-America line doing different jobs between Europe and Argentina until the outbreak of World War I, when it was based in Buenos Aires. In 1918 the ship was acquired by the Argentinian government and it was not until 1935 when the ship was taken over by the Italian government and renamed again: the Umbria. From that moment its trips were to transport troops and during the following two years carried several thousand soldiers to the Italian colonies in East Africa.
The loss of the Umbria
In May 1940, when Italy was still neutral in World War II, the Umbria was secretly loaded with 360,000 bombs between 15 kg and 100 kg, 60 boxes of detonators, building materials and three Fiat Lunga cars, carrying a total 8,600 tons of weapons towards the East Africa. The explosives had destination Massawa and Assab, Eritrea, that was Italian colony by then, and the rest of the cargo was heading different locations in Asia. Italy's entry into the war was imminent and this shipment was destined to the defense of the colonies against the Allies and to the possible expansion of its African territories.
On 3rd June 1940 the Umbria reached Port Said, northern Egypt, where loaded with 1,000 tons of coal and water in a movement to fool the Allies, trying to look like a harmless freighter. The port, controlled by the Royal Navy, and its authorities allowed the ship enter on the Red Sea three days after arrival. The British delayed the departure of the Umbria knowing that Italy's entry into the war was imminent and that the cargo of Umbria had devastating power that sooner or later would be used against the Allies and why not, to get a great load to fight fascism. But Italy, as a neutral country that it was, had every right to transport weapons much like any other cargo to its colonies.
Having met the deadline to be retained, the Umbria crossed the Suez Canal on June 6th but with the escort of the HMS Grimsby. The importance and destructive capacity of the cargo required it. Three days later the Umbria entered in Sudan waters and the HMS Grimsby ordered the Umbria captain to anchor on Wingate Reef under the pretext of searching for contraband. Moments later the British warship HMS Leander arrived with a group of 20 sailors who boarded the Umbria. After thoroughly searching the ship and finding nothing, the captain ordered the British troops to remain the night aboard the Umbria.
The next morning Lorenzo Muiesan, Umbria captain, was in his cabin listening to the radio when Mussolini announced the entry of Italy into the World War II. Hostilities would begin at midnight of that day. Muiesan, a very patriotic captain with long experience, was the only one in the area who had heard the news and knew immediately that both Umbria and the burden would be used by the Allies against their own country. He had no option to disable both. In a move of extraordinary intelligence, as the hours passed retained by the British who did not yet know that Italy was officially the enemy, the captain ordered his crew conducting a rescue simulation... that was more real than the British thought. This maneuver, which the English soldiers agreed as they believed it would serve to further delay the departure of the Umbria. While the Italians occupied the lifeboats, the chief engineers, following Muiesan´s orders, opened all the valves and drown the ship to the bottom of the reef. With the crew safe, the British only had time to get on their ship and watch the freighter slid slowly.
When the captain of HMS Grimsby asked why he had done that Muiesan confirmed the declaration of war from Italy to Britain. The next day Muiesan and the rest of Umbria crew departed detainees to India, where they spent four years in prison.
CARGO:
The Umbria was carrying 360,000 individual aircraft bombs ranging in size from 15, 50 and 100 kg. The vessel also carried a large quantity of fuses, ammunition and detonators as well as other traditional cargo. The captain knew these bombs would be confiscated and used by the enemy against his country should they ever discover them which was why he made the call to sink the ship.
The Umbria had sailed in June 1940 with 6,000 tons of bombs, 60 boxes detonators, explosives, weapons and three Fiat 1100 Lunga from Genoa via Livorno and Naples in the Suez Canal and on the way via Massaua and Assab to Calcutta.
Though the Harrier GR.1/3 series had proven itself capable, pilots reported that the Harrier was not realizing its own potential: it was underpowered and could not carry as much ordnance as originally planned. Hawker-Siddeley, along with McDonnell Douglas in the United States, began working on a new Harrier design, but budget cuts to the RAF led Hawker-Siddeley to end the project for an upgraded Harrier. McDonnell Douglas, however, kept working on it, which culminated in the AV-8B, the so-called "Harrier II." The AV-8B used a more powerful Rolls-Royce Pegasus engine, a larger wing made from composites, more options for ordnance, and modern avionics. By 1982, Hawker-Siddeley--now British Aerospace--was able to reenter into the partnership with McDonnell Douglas, restoring the Harrier to its Anglo-American origins. Both companies would produce the Harrier II as the AV-8B for the US Marine Corps, and the Harrier GR.7 for the RAF.
As promised, the AV-8B/GR.7 was a major upgrade over the earlier Harrier. It was faster, it could carry over 6000 pounds more on the larger wings, and incorporated new technology such as Hands On Throttle and Stick (HOTAS) and multifunction displays in the cockpit, making it easier to fly than the earlier Harriers. Combat experience gained by RAF and Fleet Air Arm Harriers in the Falklands was incorporated as well: Harrier pilots now sat under a bubble canopy with superb all-around vision, and were equipped with all-aspect Sidewinders. (AV-8B users would later get full radar suites allowing them to fire the AIM-120 AMRAAM self-guided missile, an improvement also added to the Sea Harrier FRS.2; however, RAF Harriers were never given that upgrade.)
The first RAF Harrier GR.7s entered service in 1990, but were just too late for the First Gulf War, as they were not fully operational when Iraq invaded Kuwait. The GR.7's baptism of fire would come over former Yugoslavia, when it was used in the close air support role over Bosnia in 1995. RAF Harriers would subsequently be used over Kosovo, Sierra Leone, Afghanistan and Iraq, operating from both land bases and the Royal Navy's Invincible-class light carriers, the latter alongside their Sea Harrier "cousins." The GR.7 fleet was upgraded to GR.9 standard with updated avionics and weapons options.
Rising maintenance costs and defense budget costs would lead to the Fleet Air Arm's Sea Harriers being retired in 2006; jointly operated GR.9s were then flown by both RAF and FAA pilots as part of Joint Task Force Harrier. It was planned to keep the Harrier force operating until at least 2018, when the Lockheed Martin F-35B Lightning II would be available to replace it, but in 2010, the Ministry of Defence chose to retire the entire Harrier fleet as a cost-saving measure. It was a controversial decision to say the least, but the Harriers were grounded by the end of the year. About half the GR.9s built were taken to the United States to be used as spares for the USMC's AV-8B fleet, but as of this writing five remain in the UK as museum pieces.
Because I didn't have a RAF Harrier in my collection, I picked up this 1/72 scale Revell "quick build" aircraft. It's prepainted, snaps together and lacks some detail, but it still looks nice on the shelf--even if it is more a toy than a model. It depicts a GR.7 from 3 Squadron based at RAF Cottesmore; the tail was painted to commemorate the squadron's 90th anniversary in 2003. The squadron crest is carried on the intake behind the RAF roundel. The two shades of gray scheme, similar to the USMC Harrier pattern, was the last scheme to be carried by British Harriers. It is shown equipped with two AIM-9L Sidewinders, four Hunting BL755 cluster bombs, and two CRV-7 rocket pods.
Built by the Schiffswerks Rieherst company in Hamburg, the Umbria was launched on December 30th 1911 with the name of Bahia Blanca. It was a large freighter by that time, 150 meters long, with a power capable of providing a speed of 14 knots that could carry 9,000 tons of cargo and up to 2,000 passengers. In 1912 it began operating the Hamburg-America line doing different jobs between Europe and Argentina until the outbreak of World War I, when it was based in Buenos Aires. In 1918 the ship was acquired by the Argentinian government and it was not until 1935 when the ship was taken over by the Italian government and renamed again: the Umbria. From that moment its trips were to transport troops and during the following two years carried several thousand soldiers to the Italian colonies in East Africa.
The loss of the Umbria
In May 1940, when Italy was still neutral in World War II, the Umbria was secretly loaded with 360,000 bombs between 15 kg and 100 kg, 60 boxes of detonators, building materials and three Fiat Lunga cars, carrying a total 8,600 tons of weapons towards the East Africa. The explosives had destination Massawa and Assab, Eritrea, that was Italian colony by then, and the rest of the cargo was heading different locations in Asia. Italy's entry into the war was imminent and this shipment was destined to the defense of the colonies against the Allies and to the possible expansion of its African territories.
On 3rd June 1940 the Umbria reached Port Said, northern Egypt, where loaded with 1,000 tons of coal and water in a movement to fool the Allies, trying to look like a harmless freighter. The port, controlled by the Royal Navy, and its authorities allowed the ship enter on the Red Sea three days after arrival. The British delayed the departure of the Umbria knowing that Italy's entry into the war was imminent and that the cargo of Umbria had devastating power that sooner or later would be used against the Allies and why not, to get a great load to fight fascism. But Italy, as a neutral country that it was, had every right to transport weapons much like any other cargo to its colonies.
Having met the deadline to be retained, the Umbria crossed the Suez Canal on June 6th but with the escort of the HMS Grimsby. The importance and destructive capacity of the cargo required it. Three days later the Umbria entered in Sudan waters and the HMS Grimsby ordered the Umbria captain to anchor on Wingate Reef under the pretext of searching for contraband. Moments later the British warship HMS Leander arrived with a group of 20 sailors who boarded the Umbria. After thoroughly searching the ship and finding nothing, the captain ordered the British troops to remain the night aboard the Umbria.
The next morning Lorenzo Muiesan, Umbria captain, was in his cabin listening to the radio when Mussolini announced the entry of Italy into the World War II. Hostilities would begin at midnight of that day. Muiesan, a very patriotic captain with long experience, was the only one in the area who had heard the news and knew immediately that both Umbria and the burden would be used by the Allies against their own country. He had no option to disable both. In a move of extraordinary intelligence, as the hours passed retained by the British who did not yet know that Italy was officially the enemy, the captain ordered his crew conducting a rescue simulation... that was more real than the British thought. This maneuver, which the English soldiers agreed as they believed it would serve to further delay the departure of the Umbria. While the Italians occupied the lifeboats, the chief engineers, following Muiesan´s orders, opened all the valves and drown the ship to the bottom of the reef. With the crew safe, the British only had time to get on their ship and watch the freighter slid slowly.
When the captain of HMS Grimsby asked why he had done that Muiesan confirmed the declaration of war from Italy to Britain. The next day Muiesan and the rest of Umbria crew departed detainees to India, where they spent four years in prison.
CARGO:
The Umbria was carrying 360,000 individual aircraft bombs ranging in size from 15, 50 and 100 kg. The vessel also carried a large quantity of fuses, ammunition and detonators as well as other traditional cargo. The captain knew these bombs would be confiscated and used by the enemy against his country should they ever discover them which was why he made the call to sink the ship.
The Umbria had sailed in June 1940 with 6,000 tons of bombs, 60 boxes detonators, explosives, weapons and three Fiat 1100 Lunga from Genoa via Livorno and Naples in the Suez Canal and on the way via Massaua and Assab to Calcutta.
NEOBALLS / ZEN MAGNETS - Neodymium Magnetic Balls (@4205) - Starcraft II's Massive Thor
This is my most complex and largest build to date.
It was designed in parts: Cockpit body, then legs, then arms, then rear guns. Then I had to redesign parts when it came time to assemble it together because of incorrect bonding assumptions and misalignment of magnet fields.
Experimented with x-beam coupled bonds to get the maximum lateral strength with reinforcements on the sides. This proved to be very string. Created a X-Beam using similar methods producing a very strong leg structure. It was capable of support the entire weight of the cockpit body w/o a problem. Had to redesign the leg to cockpit body mount point from the earlier concept because the bond was not completely coupled.
Next up were the arm/guns ... the weight was too much for the cockpit body to support so I fashioned a pair of lego-platforms for them to rest on and take the weight off of the central body.
Finally ... the rear guns ... these were a challenge in that their original mount point design had to be reworked also to make them fit correctly into the rear of the cockpit body. I changed the mount points on the guns to fit the space on both sides and added a few support balls to improve the mount point bonds. I was very surprised how they were balanced and supported only by two point sections to the body. The guns stayed in place for a small series of photos.
The design flaw was in the side bonds of the beam to the legs. The coupled field held nicely for a short amount of time and would have held if it didn't have the weight of the rear guns to support. When they were standing upright and straight, all was good. As soon as I attempted to move the platform forward (to take a video), the rear guns tilted slightly backwards and and that was the end of the leg to body support bonds ... and created the dreaded implosion.
The rear gun weight caused the entire central body section to rotate backwards and fall back on the rear guns ... taking the arms in the process. Perhaps I should have created a Lego-support structure for the rear guns to remove the pendulum force backwards ... but that would have created another view blocker like the side Lego-platforms obstructed the view of the legs and feet. Not sure if I can recreate it for a rotational video ... this took over a week (on/off to design and assemble).
Overall ... I was very happy with the result ... hope I captured enough detail to warrant some visual recognition as a Starcraft II Thor reproduction/interpretation.
This was design and built for the Zen Magnets Contest 26: The Massive Thor
www.zenmagnets.com/blog/26-the-massive-thor/
I tried to document the info for this super complex build (below) accompanied by associated pics in this set
www.flickr.com/photos/tend2it/sets/72157632920071597/
Starcraft II Thor Magnet Count and Detail Talley
======+================
Cockpit Body bottom section: (@0520)
(@0217) - Main shape middle core = (2x108) + 1
(@0095) - central bottom layer 1 = (47x2) + 1 w/black parameter
(@0078) - Sides Bottom layer 2 = (2x(22 parallel pair frnt2bck support + 3 red + 4 gold + 10 ring outside black))
(@0028) - Central bottom layer 3 = (2x14) rectangle
(@0032) - Sides bottom layer 3 = (2x((2x5 parallel bridge rectangle to ring) + (6 ring outside))
(@0010) - Central bottom layer 4 = (10 ring) leg waist w/gold
(@0020) - Sides bottom layer 4 = (2x10 ring) coupled over parallel bridge for perpendicular underside support
(@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end)
------
Cockpit Body top section (from center out): (@0371)
(@0166) - top layer 1 = (2x83) w/black missle cover + middle sect separator
(@0105) - top layer 2 = ((2x52) + 1) w/black separator, red trim, gold cockpit
(@0083) - top layer 3 = ((2x41) + 1) w/black separator, red trim, gold cockpit
(@0037) - top layer 4 = ((2x18) + 1) w/black separator trim
(@0010) - top layer 5 = (2x5) w/red/black
------
(@0891)
Leg section x2 (@0640 - 12 removed from bottom of @ leg for foot contact pt)
leg internal structure:
(@0384) - columns = 2 x (4x((2x12) + ((2x11) + 2))) top/bottom coupled bonds w/parallel bonds stacked x 4))
(@0096) - side reinforcements = 2x((2x11) + 2) coupled pair along outside edge centers)
(@0032) - ball reinforcements = 2x(2x4 balls are two balls added to 4 ball in 2, 4, 6, 8th positions) - (12 @ bottom)
leg arch structure (connected to one flat leg top face:
(@0128) - (4x4 parallel sqr) + (2x(6 + 2)) pointy rings) + (4x4 parallel sqr) + (2x(6 + 2)) pointy rings)
Place the two leg arch structures together to form the leg arch
-------
(@1519) = 1531-12
Leg side panels (@0384)
(@0344) - (2 each leg x (2x(2x43 each side))) w/black outside trim
Knees + Leg detail
(@0040) - (2x(2x(6 + 2) knee w/red sqr) + 2x(4 red sqr top of leg))
-------
(@1903)
Feet x2 (@0242)
(@0184) - (2x((2x7 + 2 1st mid layer) + (2x(2x10 + 1) 2nd mid layer) + ((2x(2x8 + 1) outside layer))
(@0034) - (2x(2x(2x3 + 1 top of toe 2 leg)) + (1 center rear foot 2 leg conn) + (2 x 1 outer rear foot sides 2 leg
conn))
(@0024) - (2x(2x6 rings rear foot heel))
-------
(@2145)
X-Beam waist platform - (@0233 - 19) this part is placed across the center perpendicular to the x-beam leg arch
(@0214) - (2x(2x(18 + 17 + 6 + 3)) + (2x(7 + 2)) + ((8 + 1 front side) + (2x9 rear side)) + ((2 x 3 red front center) +
(2 x 2 red front sides) + (2 red rear)) - (19 removed under rear panel side to fold)
Arm Guns (2 pair per arm w/red + black accents)
(@0380) - (4x((4x9 center core) + (3x((2x7) + 1)) top/sides) + (2x7) middle join))
Shoulder to elbow core w/o reinforcements ((@0174)per arm)
(@0348) - (2 x (top((2x5)+2) + (4x8+2 parallel) + ((2x5)+2) + (2x5) + (2x(2x5)+1) + (2x(2x6)+1) + ((4x7)+2 parallel
mount2gun) + (1 ball center to bridge below 2 ball center to 1 ball) + ((2x6)+1) + ((2x4)+2)bottom)
Shoulder to elbow (per arm, per side)
(@0248) - (2 x (2 x (top 3 + 5 + 5 + 5 + 4 + 5 + 4 + 4 + 5 + (2x7arm2shoulder bridge) + (5 + 3 bottom))
Elbow to gun support (per arm, per side) (@0140 - 18 for outside facing side revamp)
(@0122) - (2 x (2 x (((2x9)+1) + (2x8)) -
Revamp outside facing sides for Z bracket (remove 2x(4 top/4 bottom/2 middle/move center ball down, add 1 ball)
Revamp 2 rear centerballs with red
(@028) - add red design outside facing shoulder 2 elbow
------
(@3485)
Rear Guns x2
Large cannon (@0112 each)
(@0224) - 2 x ((2x(2x15) + (4x(5+2)) + (4x(6 ring)))
Smaller cannon (@0092 each)
(@0184) - 2 x ((2x(2x13) + (4x(4+2)) + (4x(4 ring)))
Gun bridges (@0010 each)
(@0020) - (2 x (4 ring + 6 ring across two cannons)
Gun mounts x2
(@0104) - (2 x ((top (2x4+2) + (2x5+2) parallel to existing + (2x4+2) + (2x5 parallel) + (2x4+2) bottom)
Gun panel x 2 (@0102 each)
(@0204) - (2 x (2x(11 + 10 + 9 + 8 + 7 + 6))
-------
Revamp base
(@4221) subtotal b4 assembly
Assembly mods
-------------
Moved the (@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end) below the rear of the body between
the leg mount and cockpit body. Actually used the barrel as a mount point for the rear guns.
Modded Cockpit Body bottom section (mount point):
(@0020) = (2 x (7 + 6 + 5)) = Changed = (@0028) - Central bottom layer 3 = (2x14) rectangle to covert parallel
rectangle to hex parallel center, coupled sides
-------
(@4213) = (@4221 - 8)
Moved central bottom layer x-beam
(@0018) = (2x09 ring) = Changed = (@0020) - Sides bottom layer 4 = shifted it down one row, removed 1 ball on end to form point and pinched outside end fit in center of 6 ball side.
(@4211) = (@4213 - 2)
Removed gold 10 ball ring mount
Changed = (@0010) = Central bottom layer 4 = (10 ring) leg waist w/gold
-------
(@4201) = (@4213 - 10)
Modded Rear Guns
(@0100) = Changed = Rear Gun mounts x2 - removed +2 from top/bottom mount point (2x4+2)=>(2x4)
(@4197) = (@4201-4)
Added extra mount point support bwtween rear gun mounts and rear cockpit body
(@4205) = (@4201+8)
Grand Total! = (@4205)
Back in August 2012, we went for a walk out onto Oare Marshes, and on the way back called in at St Peter, which was unlocked, unlike our most recent visit.
So, reviewing the hard drive of shots took that day, I found some others I failed to post at the time, some are blurred, but I have done my best to sharpen, and are just about acceptable, and will do until I visit again and find it open.
------------------------------------------
St Peter’s Oare, a Grade I listed building, is often described as a ‘mainly 13th century church’ – which it is. However, the view that confronts the visitor entering the churchyard gate is pure Victoriana, the work of diocesan architect Joseph Clarke, an example of the sympathetic restoration of which not all Victorians were capable.
Indeed, it is this west elevation, with its louvred bell-tower and cedar-shingled spirelet, that is St Peter’s to visitors, artists and photographers.
The building could hardly be better sited. It stands where village becomes countryside, set inconspicuously back from a road that leads only to the broadening waters of the Swale and their marshland bird-life. In the churchyard, a few mature trees remain of those that once cast gloom over church and graves. They rise from among ancient headstones and ivy-clad tombs, providing summer shade for those who want to enjoy the panoramic views over Oare Creek and acre upon distant acre of marsh pastures with the North Downs as a backdrop. With binoculars or good eyesight you can rest on one of the conveniently located benches and count how many far-off churches you can pick out from this elevated point of vantage.
But how old is the church? you ask. Everyone seems to. To this there is no categorical answer. Today the building is little changed since the 1860s restoration and yet there was a church here when the Domesday Book was penned – well, half a church, but which half our Norman forebears didn’t say. A church half-finished? Or a church part-razed by the tempests of that tempestuous age?
What we do know is that the chancel was extended eastwards in the late 14th or early 15th century, and some time thereafter the old east window was taken out and replaced by a larger one in the Perpendicular style. The actual glass is more recent – the work of F.C. Eden. It was given in memory of artist Francis Forster, a casualty of WWI. Another window by this noted London artisan, on the north wall, commemorates another war victim. Below it a memorial slab set into the frame of this once tall lancet window names those who died in the great explosion of 1916, when the marshes throbbed with a wartime industry of munitions manufacture.
Back in the secluded peace of this village church is one treasured rarity, a square font of Purbeck marble from the late Norman/Early English period. Its sides were once elaborately carved, but many years ago it went missing, only to be recovered decades later from a nearby pond, somewhat the worse for its immersion. Was it concealed from Cromwell’s ravaging iconoclasts? No one knows. This hazy fact must take its place with the many mysteries hidden among the pages of time. But is it not these undocumented secrets that make a church like St Peter’s so alluring? Who can tell when the truth will emerge and another page of history can be written?
www.thekingsdownandcreeksidecluster.co.uk/?page_id=683
-------------------------------------------
A small Norman church overlooking Oare Creek with fine views to the east. Built of flint with Victorian additions by Joseph Clarke, the exterior is dominated by lively painted spirelet and south porch and muscular buttresses. Inside, a simple view with no chancel arch is enlivened by a Norman font, simple Victorian pulpit and fine stained glass windows by F C Eden. The west window – an oculus – contains the date 1867 recording the restoration of the church. A plaque commemorates those who lost their lives in one of the explosions at the nearby Gunpowder factory in 1916. The overall impression is of a lovingly cared for church, mirroring the lives of generations of Oare folk and it is highly recommended.
www.kentchurches.info/church.asp?p=Oare
-------------------------------------------
ORE
LIES the next parish north westward from Davington, and is so called from the etymology of it in the Saxon language, signifying a fenny or marshy place.
This parish is a very low situation, at the very edge of the marshes, it is consequently but little known or frequented, its vicinity to the marshes, and its low and watry situation, make it very unhealthy, so that it is but very thinly inhabited, but the lands are very rich and fertile, the waters of the Swale are its northern boundaries; on its south it rises up towards Bysing-wood, from which it is distant about a mile. The village is occupied by a few fishermen and oyster dredgers, situated near the middle of the parish on a small ascent, having the church about a quarter of a mile to the north-westward of it, and Ore-court at the like distance, at the edge of the marshes. The creek, which is navigable up to the village, whence it runs north-east, and at a little more than half a mile's distance joins the Faversham creek, and flows with it about the like distance, till it meets the waters of the Swale.
Several scarce plants have been observed in this parish by Mr. Jacob, who has enumerated them among his Plantæ Favershamienses, to which book the reader is referred for a list of them.
THE MANOR of Ore was part of the vast possessions of Odo, bishop of Baieux, and earl of Kent, the Conqueror's half-brother, under the general title of whose lands it is thus entered in the general survey of Domesday:
In Lest de Wiwarlet. In Favreshant hundered, Adam holds of the bishop (of Baieux) Ore. It was taxed at two sulings. The arable lands are four carucates. In demesne there is one, and ten villeins, with ten borderers, having two carucates. There is half a church, and one mill of twenty-two shillings, and two fisheries without tallage, and one salt-pit of twenty-eight pence. Wood for the pannage of six bogs. In the time of king Edward the Confessor it was worth four pounds, and afterwards sixty shillings, now one hundred shillings. Turgis held it of king Edward.
And a little afterwards there is another entry as follows:
Adam holds of the bishop one yoke in Ore, and it was taxed at one yoke. The arable land is one carucate. Four villeins now hold this to ferme, and pay twenty shillings, and it was worth so much separately. There is a church. Leunold held it of king Edward.
Four years after the taking of the above survey, the bishop of Baieux was disgraced, and all his possessions were consiscated to the crown.
Upon which the manor of Ore came to be held immediately, or in capite of the king, by the beforementioned. Adam de Port, of whose heirs it was afterwards again held by Arnulf Kade, who gave this manor, with that of Stalishfield, and their appurtenances, to the knights hospitallers of St. John of Jerusalem, and it was assigned by them to the jurisdiction of their preceptory, established at Swingfield.
The manor of Ore continued part of the possessions of these knights till the general dissolution of their hospital in the 32d year of Henry VIII. when this order was suppressed by an act then specially passed for that purpose. (fn. 1)
This manor seems to have remained in the hands of the crown till king Edward VI. granted it in his 5th year, to Edward, lord Clinton and Say, who next year re-conveyed it back again to the king. (fn. 2)
How it passed from the crown afterwards I have not found, but that at length it came into the possession of the family of Monins, and thence by sale to that of Short, one of which, Samuel Short, esq. owned it in 1722, and it continued down in his descendants to Philip Short, esq. who was succeeded in it by Mr. Charles Maples Short, who died a few years ago at Jamaica, on which it became vested in Mr. Humphry Munn, gent. in right of Lydia Short his wife. Hence it passed by sale to Mr. Bonnick Lipyeatt, who died in 1789, leaving two daughters his coheirs, who married Mr. Charles Brooke, of London, and Mr. Gosselin, and entitled them respectively to this estate.
A court leet and court baron is held for this manor.
There are noparochial charities. The poor constantly relieved here are not more than two; casually about six.
ORE is within the ECCLESTASTICAL JURISDICTION of the diocese of Canterbury, and deanry of Ospringe.
The church which is dedicated to St. Peter, is a small building, of one isle and one chancel, having a pointed steeple at the west end, in which are two bells.
This church, which was antiently accounted only as a chapel to that of Stalisfield, belonged to the priory of St. Gregory, in Canterbury, perhaps part of its orignal endowment by archbishop Lanfranc, in the time of the Conqueror, and it was confirmed to it, among its other possessions, by archbishop Hubert, about the reign of king Richard I.
In the 8th year of Richard II. there was a yearly pension paid from the church of Ore, of ten shillings to the priory of Rochester, and another of eight shilling to that of Leeds. (fn. 3)
This church remained part of the possessions of the priory of St. Gregory, till the dissolution of it in the reign of Henry VIII. in the 27th year of which, an act having passed for the suppression of all such religious houses, whose revenues did not amount to the clear yearly value of two hundred pounds, this priory was thereby dissolved, and the scite of it, together with all its lands, possessions, and revenues, surrendered into the king's hands, by John Symkins, prior of it.
The church of Ore remained with the other possessions of the priory in the crown but a small time, for an act passed that year to enable the king and the archbishop of Canterbury to exchange the scite of the late dissolved priory of St. Radigund near Dover, with all its possessions, lately given by the king to the archbishop, for the scite of the late dissolved priory of St. Gregory, and all the possessions belonging to it, excepting the manor of Howfield, in Chartham.
After which the parsonage of this church was demised by the archbishop, as it has been since by his successors, among the rest of the revenues of the priory of St. Gregory, from time to time, in one great lease, (in which all advowsons and nominations to churches and chapels have constantly been excepted) in which state it continues at this time. George Gipps, esq. of Harbledown, M.P. is the present lessee of then to the archbishop, and Mr. John Hope, of Ore, is the present leffee under him for the parsonage of this church, at the yearly rent of thirty-four pounds.
It pays, procurations to the archdecaon five shillings, and to the archbishop at his visitaiton two shillings. When the church of Ore was separated from that of Stalisfield, I have not found, but it has long been an independent church of itself.
It was, long before the dissolution of the priory of St. Gregory, served as a curacy by the religious of it; since which it has been esteemed as a perpetual curacy, of the patronage of the successive archbishops of Canterbury, and continues to at this time. In 1640 the communicants here were forty-seven.
The lessee of the parsonage pays the curate, by the convenants of his lease, the yearly sum of fifteen pounds.
¶Before the year 1755, it had been augmented by the governors of queen Anne's bounty with the sum of two hundred pounds, and divine service was performed here only once a fortnight; since which it has been augmented with 1000l. more, and it is now performed here once a week. Of the above sum of 1200l. in the year 1764, 260l. were laid out in the purchase of an estate, of a house, buildings, and twenty-two acres of land, in Ospringe; and in 1770, another estate was purchased, consisting of a house, buildings, and thirty-three acres of land, in Boughton under Blean. The remaining 280l. yet remain in the governors hands.
The first car capable of completing a lap of the Le Mans 24 Hour Race under electric power. The car only lasted 5 laps none of which were fully electrically powered.
Le Mans 24 Hours 2014 - The Pit Walk
Hammered brass hoops with a mix of charms and beads; chalcedony, vintage cut glass, rhodonite, pearls and czech rondells.
Although many aircraft are capable of moving themselves backwards on the ground using reverse thrust (a procedure referred to as a powerback), the resulting jet blast or prop wash may cause damage to the terminal building or equipment. Engines close to the ground may also blow sand and debris forward and then suck it into the engine, causing damage to the engine. A pushback using a tractor is therefore the preferred method to move the aircraft away from the gate.
en.wikipedia.org/wiki/Pushback
This ageing example has a flat rear tyre.
The Lahav Division of Israel Aerospace Industries has developed a semi-robotic towbarless tractor it calls Taxibot that can tow an aircraft from the terminal gate to the take-off point (taxi-out phase) and return it to the gate after landing (taxi-in phase). The Taxibot eliminates the use of airplane engines during taxi-in and until immediately prior to take-off during taxi-out potentially saving airlines billions of dollars in fuel that is used. The Taxibot is controlled by the pilot from the cockpit using the regular pilot controls.
www.treehugger.com/aviation/taxibot-reduces-airplane-emis...
English:
CH-148 Cyclone
Royal Canadian Air Force
The CH-148 Cyclone is one of the most capable maritime helicopters in the world. It is Canada’s main ship-borne maritime helicopter, and it provides air support to the Royal Canadian Navy.
The Cyclone can be used for surface and sub-surface surveillance, search and rescue missions, tactical transport and more. It can operate during the day or night and in most weather conditions to support missions in Canada and around the world.
Length: 17.22 m
Length (folded configuration): 14.78 m
Rotor span: 17.48 m
Height: 5.44 m
Maximum Gross Weight: 13,000 kg
Maximum speed: 287 km/h
Range: 740 km
Location(s):
Patricia Bay, B.C.
Shearwater, N.S.
----------------------------------------------------------------------------------------
Français :
CH-148 Cyclone
Aviation royale canadienne
Le CH-148 Cyclone figure parmi les hélicoptères maritimes les plus efficaces au monde. À titre de principal hélicoptère maritime embarqué du Canada, son travail consiste à apporter un soutien aérien à la Marine royale canadienne.
Le CH-148 Cyclone accomplit notamment des missions de surveillance et de contrôle de surface et sous-marins, de recherche et de sauvetage et de transport tactique. Il peut accomplir son travail de jour comme de nuit, dans la majorité des conditions météorologiques, afin de soutenir les missions canadiennes et internationales.
Longeur : 17,22 m
Longeur (plié) : 14,78 m
Envergure du rotor : 17,48 m
Hauteur : 5,44 m
Masse totale maximale : 13 000 kg
Vitesse maximale : 287 km/h
Autonomie : 740 km
Bases :
Patricia Bay, C.-B.
Shearwater, N.-É.
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
The Theresian Military Academy was under Maria Theresa on 14 December 1751 with the mission "Make he me thereof capable officers and righteous men" to the first commander Field Marshal Leopold Joseph of Daun founded and is, thus, the oldest active uninterruptedly the officer training dedicated Military Academy of the World. Memorable is that the building since 1752 - except for the years of occupation, war and destruction due to the Third Reich - uninterruptedly hosted the Military Academy, while the Royal Military Academy Woolwich, founded in 1741, was closed in 1939. The Royal Military Academy Sandhurst, founded in 1947, only from a sentimental point of view continues the tradition of its predecessor academy. In Wiener Neustadt, in contrast, were admitted since 1752 almost without interruption per year 100 nobles and 100 commoners. The officers of the Austria-Hungarian army as well were to 1918 formed here.
The term military academy it wears since the unification with the nursery of Cadets in 1769. Already in 1771 appeared a by local director lieutenant field marshal Johann Georg Carl Freiherr von Hannig elaborated regulated curriculum and 1775 the by Maria Theresa sanctioned Academy Regulations. The training period at that time was eleven years and was gradually reduced to three years.
The famous Styrian Archduke Johann of Austria was 44 years (1805-1849) Chief Executive Officer of Theresian Military Academy.
In the First Republic, the training was to 1934 performed in Enns (Upper Austria) and then again in Wiener Neustadt. A special feature in the time between the Austrofascism and the Annexation is the refusal of Major General Rudolf Towarek (1933-1938 Commander of the Military Academy), to hand over the castle to German Wehrmacht which had just invated Austria. He had the guard paraded with fixed bayonet and so refused the Wehrmacht several days admission to the castle. This act had until his retirement no negative impacts on Major General Towarek, he even obtained permission to continue to wear the Austrian uniform after his retirement.
By Colonel Erwin Rommel, later Field Marshal, immediately after the Annexation a training school for officer training was set up which he at the beginning also directed himself. To the school the Daun barracks was added.
Towards the end of World War II, the castle was almost completely destroyed by bombs, fires and looting. It burned in April and May 1945 within almost 14 days completely down. The remaining ruins were in the reconstruction in the years 1946 to 1959 restored to its historical form, the interior, however, adapted to current requirements. So the military academy was able to resume operations in the year 1958.
Main portal of the Theresian Military Academy
After the founding of the Armed Forces in 1955, the Military Academy was housed again until 1958 in Enns, from where it subsequently moved back to the castle of Wiener Neustadt, that after the damages caused by the Second World War had been repaired.
In Vienna Museum of Military History, the campaign streamer of the first flag of the military academy is set up. It was donated by Maria Theresia just before her death in 1780 for the first flag, supposedly she should have embroidered it personally. Under the banner ribbon there are two paintings (gouaches) of Bernhard Albrecht (1758-1822). Albrecht was an art teacher at the Military Academy and he also depicted the pupils in their military and athletic exercises. So show the images scenes as "target practice with mortars" and "balancing exercises of cadets at the high balance beam". The sheets have emerged 1785-1793.
The current commander is Brigadier Karl Pronhagl.
Die Theresianische Militärakademie wurde unter Maria Theresia am 14. Dezember 1751 mit dem Auftrag „Mach’ er mir tüchtige Offiziere und rechtschaffene Männer darauß“ an den ersten Kommandanten Feldmarschall Leopold Joseph von Daun gegründet und ist somit die älteste aktive, durchgängig der Offiziersausbildung gewidmete Militärakademie der Welt. Denkwürdig ist, dass das Gebäude seit 1752 – mit Ausnahme der Okkupations- Kriegs- und Zerstörungsjahre in Folge des Dritten Reiches durchgängig die Militärakademie beherbergte, wogegen die 1741 gegründete Royal Military Academy Woolwich 1939 geschlossen wurde. Die Royal Military Academy Sandhurst, gegründet 1947, setzt nur in ideeller Hinsicht die Tradition ihrer Vorgängerakademie fort. In Wiener Neustadt wurden dagegen seit 1752 fast durchgängig pro Jahr je 100 Adelige und 100 Bürgerliche aufgenommen. Auch die Offiziere der Österreich-Ungarischen Armee wurden bis 1918 hier ausgebildet.
Die Bezeichnung Militärakademie trägt sie seit der Vereinigung mit der Pflanzschule für Kadetten im Jahr 1769. Bereits 1771 erschien ein vom Lokaldirektor Feldmarschalleutnant Johann Georg Carl Freiherr von Hannig ausgearbeiteter geregelter Studienplan und 1775 das von Maria Theresia sanktionierte Akademie-Reglement. Die Ausbildungszeit betrug damals elf Jahre und wurde schrittweise auf drei Jahre verkürzt.
Der berühmte steirische Erzherzog Johann von Österreich war 44 Jahre (von 1805 bis 1849) Oberdirektor der Theresianischen Militär-Akademie.
In der ersten Republik wurde die Ausbildung bis 1934 in Enns durchgeführt und anschließend wieder in Wiener Neustadt. Eine Besonderheit in der Zeit zwischen dem Austrofaschismus und dem Anschluss ist die Weigerung des Generalmajors Rudolf Towarek (1933–1938 Kommandant der Militärakademie), die Burg der in Österreich einmarschierten deutschen Wehrmacht zu übergeben. Er ließ die Wache mit aufgepflanzten Bajonett aufmarschieren und verweigerte so der Wehrmacht mehrere Tage den Zutritt zur Burg. Diese Tat hatte bis auf seine Pensionierung keine negativen Auswirkungen auf Generalmajor Towarek, er erhielt sogar die Erlaubnis, nach seiner Pensionierung weiterhin die österreichische Uniform zu tragen.
Von Oberst Erwin Rommel, dem späteren Generalfeldmarschall, wurde unmittelbar nach dem Anschluss eine Kriegsschule für die Offiziersausbildung eingerichtet, die er anfangs auch selbst leitete. Zu der Schule kam auch die Daun-Kaserne dazu.
Gegen Ende des Zweiten Weltkriegs wurde die Burg durch Fliegerbomben, Brände und Plünderungen fast vollkommen zerstört. Sie brannte im April und Mai 1945 innerhalb von fast 14 Tagen restlos aus. Die übrig gebliebene Ruine wurde beim Wiederaufbau in den Jahren 1946 bis 1959 in ihrer historischen Form wiederhergestellt, das Innere jedoch den zeitlichen Erfordernissen angepasst. So konnte die Militärakademie im Jahr 1958 ihren Betrieb wieder aufnehmen.
Hauptportal der Theresianischen Militärakademie
Nach der Gründung des Bundesheeres im Jahr 1955 war die Militärakademie nochmals bis 1958 in Enns untergebracht, von wo sie anschließend wieder in die Burg von Wiener Neustadt übersiedelte, nachdem die Beschädigungen durch den Zweiten Weltkrieg behoben worden waren.
Im Wiener Heeresgeschichtlichen Museum ist das Fahnenband der ersten Fahne der Militärakademie ausgestellt. Es wurde von Maria Theresia knapp vor ihrem Tod 1780 für die erste Fahne gestiftet, angeblich soll sie es persönlich bestickt haben. Unter dem Fahnenband befinden sich zwei Bilder (Gouachen) von Bernhard Albrecht (1758–1822). Albrecht war Zeichenlehrer der Militärakademie und schilderte auch die Zöglinge bei ihren militärischen und sportlichen Übungen. So zeigen die Bilder Szenen wie „Übungsschießen mit Mörsern“ und „Balancierübungen der Kadetten auf dem hohen Balkensteg“. Die Blätter sind zwischen 1785 und 1793 entstanden.
Der aktuelle Kommandant ist Brigadier Karl Pronhagl.
Until today I had not noticed the Brassier 7 restaurant had ceased trading but I was not surprised because I have always believed that location was not capable of supporting a 250 seater restaurant that was not within the price range of people living, working or studying in the area. Also, for various reasons. there was no way that it could attract people from elsewhere in the city.
I cannot remember exactly when but a number of years ago the celebrity chef Gary Rhodes opened his restaurant, Rhodes D7, on Capel Street in Dublin. I could not believe his choice of location and I often wondered if he had in fact every visited the restaurant or the location. I must admit that I have never understand the concept of paying extra to eat at a restaurant featuring the name of a famous chef that never cooks the food.
When it was first established my mother indicated that she would like to try it but when I phoned I was informed that it was booked out for at least four weeks. However, every time I passed by it was at best about 25% occupied. I tried a few more times but still there was a three to four week waiting list and and at one stage it was as high as six weeks despite the fact the place was less full every time I walked by. My mother never got to have a meal there.
Sometimes they would open on bank holidays and sometimes, at random, they were closed on Bank Holidays and Sundays [that is usually a bad sign]. One bank holiday I was passing by and as they were open I dropped in and got a table no problem and the food was good but expensive compared to other options nearby.
I think that it was Christmas 2008 and I had been invited to visit my brother for Christmas. On the 23rd. I visited the restaurant late in the evening and as I was the last customer to leave I got to have a chat with the head waiter who mentioned that he was going back to Poland the next morning for a two week holiday as the restaurant would be closed for two weeks. I asked him why would a restaurant close for two weeks at the busiest time of the year but he did not appear to think that it was odd but I certainly did.
The next day my trip to my brother’s house had to be cancelled because all the family were ill so I was stuck in Dublin for Christmas. On the 24th. I walked by the restaurant and it had a sign in the window indicating the the restaurant was closed for renovation until 17th. March [St. Patrick’s Day] and for many reasons that was an obvious lie.
The restaurant remained empty for a long time. Ta Brasserie 7 Limited was set up on Tuesday the 17th of April 2012. When it did reopen as Brasserie 7 I was the first customer and I got a excellent meal free of charge. Here is what I said back then “Saturday 8th. December 2012: [Update: I visited this restaurant today and I was their first customer. They have no connection with the previous operation which ceased trading at the end of 2008. The food was excellent as was the service]”.
I only visited twice during the following years because I considered it to be too expensive for what was on offer. It is possible that the prices dropped but I had lost interest.
In case you are interested here is an extract from the press release back in 2008:
“Welcome to rhodesD7, Gary Rhodes' first Irish restaurant venture. Situated in Dublin 7, our 250-cover venue offers Gary's unique style of European cuisine for which he has won 5 Michelin Stars. We offer a wide selection of dishes, each unique and flavoursome with Gary's distinctive touch. With a mezzanine floor and heated outdoor eating area, rhodesD7 offers a choice of fabulous dining areas. Situated on the ground floor of the landmark Capel Building, our modern, vibrant interior contains commissioned works of art by renowned Irish artist Deborah Donnelly.”
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Very capable British scout car in use throughout WWII and after, seen in a late WWII Tankfest 2023 scenario heading up an Allied column looking for an improvised German Kampfgruppe known to be in the area. The Dingo was very lightly armoured but then its job was to find and report back, not engage: with a gearbox allowing it five gears to be used in either direction and good four-wheel drive it was admirably designed for that purpose.
Last year, our neighbour Victor Cadong ~ a very capable builder & plumber ~ performed a minor miracle on our antiquated bathroom . . . installing this magnificent syphonic-suite & flush-tank . . .
and building a tiled step in front of the huge shower-cubicle ~ so that the floor stays DRY in front of the toilet and hand-basin !!
This year, I brought a state-of-the-art shower-head, with rise-and-fall wall-bracket, from Tesco's !!
You can just see it, top-left, beyond the green curtain . . .
And at the VERY TOP ~ the old fixed shower-head, protruding from the wall . . .
And we now have a "Vent-Axia" extraction-fan, to remove steam, condensation, and the odd mixture of odours which accumulate in a family bathroom !!
It is also a great joy to have so much manoeuvering-room, when taking a shower, and changing ~ this bathroom is ten-feet by five . . . and the ceiling is ten feet high !
The shower cubicle is five feet by three feet . . . ( mine, at home in UK., is thirty inches square !!)
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Taken in Pensacola, Florida, USA at the National Museum of Naval Aviation. The FJ-2 Fury is a swept-wing carrier-capable fighter for the United States Navy and Marine Corps. It was introduced by North American in 1951. The FJ-2 was retired in 1957.
Aeroscopia est un musée aéronautique français implanté à Blagnac (Haute-Garonne), près du site AéroConstellation, et accueille notamment deux exemplaires du Concorde, dont l'ouverture a eu lieu le 14 janvier 2015
Le tarmac Sud du musée n'est capable d'accueillir que trois gros appareils. L'installation des appareils fut définitivement terminée après que le premier prototype de l'A400M-180 y fut arrivé le 16 juillet 2015, en dépit de la possibilité de 360 000 euros de TVA.
Concorde, F-BVFC, MSN209 aux couleurs d'Air France
Caravelle 12, F-BTOE, MSN280 aux couleurs d'Air Inter, dernier exemplaire construit
A400M-180, F-WWMT, MSN001 stationné depuis le 16 juillet 2015
La réalisation en 2019 du nouveau tarmac au Nord du musée permet l'accueil d'appareils supplémentaires issus des entreprises locales Airbus et ATR. Le transfert des avions entre le site Airbus "Lagardère" et le musée a lieu sur une semaine, à raison d'un appareil par jour :
ATR 72-600, F-WWEY, MSN098 aux couleurs d'ATR, transféré sur site le 26 août 2019, premier exemplaire du 72 dans sa version 600
Airbus A340-600, F-WWCA, MSN360 aux couleurs d'Airbus, transféré sur site le 27 août 2019, premier exemplaire de l'A340 dans sa version 600
Airbus A320-111, F-WWAI, MSN001 aux anciennes couleurs d'Airbus, transféré sur site le 28 août 2019, premier exemplaire de l'A320 : inauguration le 14 février 1987 en présence de Lady Diana et du Prince Charles, premier vol le 22 février 1987
Airbus A380-800, F-WXXL, MSN002 aux couleurs d'Airbus, transféré sur site le 29 août 2019, second exemplaire de l'A380. Les deux ponts de cet appareil sont visitables, ainsi que le cockpit.
ATR 42-300, F-WEGC, MSN003 aux anciennes couleurs d'ATR, transféré sur site le 30 août 2019, troisième exemplaire du 42. Cet exemplaire est décoré aux couleurs du MSN001 et porte l'immatriculation F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), il s'agit d'un appareil de présérie qui a servi entre autres à transporter plusieurs présidents de la République française.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), décoré aux couleurs du prototype, au lieu de MSN001 démantelé. L'intérieur est visitable. Dans la première section des vitrages transparents permettent de voir la structure et les systèmes de l'avion, tandis que dans les sections suivantes sont représentés des aménagements de première classe et VIP.
Super Guppy de l'association Ailes Anciennes Toulouse, l'appareil qui servait au transport des tronçons d'Airbus est exposé porte ouverte, et une passerelle permet l'accès à la soute où un film est projeté. L'ouverture n'a pas été une mince affaire, l'appareil n'ayant pas été ouvert pendant 15 ans. L'aide des anciens mécaniciens de l'avion a été primordiale pour permettre une ouverture en toute sécurité.
Corvette (Airbus)
Falcon 10 no 02, prototype ayant servi aux essais du turboréacteur Larzac (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Gazelle prototype (AAT)
Mirage III C (AAT)
Nord 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E(FN) Crusader et son réacteur (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, ancien avion de Météo-France (AAT)
HM-293, de Rodolphe Grunberg
Chagnes MicroStar, avion de construction amateur, version biréacteur de Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
Aeroscopia is a French aeronautical museum located in Blagnac (Haute-Garonne), near the AéroConstellation site, and notably hosts two copies of the Concorde, which opened on January 14, 2015
The south tarmac of the museum can only accommodate three large aircraft. The installation of the devices was definitively finished after the first prototype of the A400M-180 arrived there on July 16, 2015, despite the possibility of 360,000 euros in VAT.
Concorde, F-BVFC, MSN209 in Air France colors
Caravelle 12, F-BTOE, MSN280 in Air Inter colors, last model built
A400M-180, F-WWMT, MSN001 parked since July 16, 2015
The construction in 2019 of the new tarmac north of the museum will accommodate additional aircraft from local Airbus and ATR companies. The transfer of planes between the Airbus "Lagardère" site and the museum takes place over a week, at the rate of one aircraft per day:
ATR 72-600, F-WWEY, MSN098 in ATR colors, transferred to site on August 26, 2019, first copy of the 72 in its 600 version
Airbus A340-600, F-WWCA, MSN360 in Airbus colors, transferred to site on August 27, 2019, first copy of the A340 in its 600 version
Airbus A320-111, F-WWAI, MSN001 in the old Airbus colors, transferred to site on August 28, 2019, first copy of the A320: inauguration on February 14, 1987 in the presence of Lady Diana and Prince Charles, first flight on February 22, 1987
Airbus A380-800, F-WXXL, MSN002 in Airbus colors, transferred to site on August 29, 2019, second copy of the A380. The two decks of this aircraft can be visited, as well as the cockpit.
ATR 42-300, F-WEGC, MSN003 in the old ATR colors, transferred to the site on August 30, 2019, third specimen of the 42. This specimen is decorated in the colors of the MSN001 and bears the registration F-WEGA
Concorde, F-WTSB, MSN201 (ANAE), this is a pre-production aircraft which was used, among other things, to transport several presidents of the French Republic.
Airbus A300B4-203, F-WUAB, MSN238 (Airbus Heritage), decorated in the colors of the prototype, instead of dismantled MSN001. The interior can be visited. In the first section transparent glazing allows to see the structure and systems of the aircraft, while in the following sections are shown first class and VIP fittings.
Super Guppy from the Ailes Anciennes Toulouse association, the aircraft which was used to transport the Airbus sections is on display with the door open, and a gangway allows access to the hold where a film is shown. Opening was no small feat, as the device has not been opened for 15 years. The help of the former mechanics of the aircraft was essential to allow a safe opening.
Corvette (Airbus)
Falcon 10 no 02, prototype used for testing the Larzac turbojet engine (Ailes Anciennes Toulouse)
Fouga Magister (AAT)
Prototype Gazelle (AAT)
Mirage III C (AAT)
North 1100 (AAT)
Lockheed F-104G (AAT)
MiG-15 (AAT)
MS.760 Paris (AAT)
Vought F-8E (FN) Crusader and its engine (AAT)
Alouette II Marine (AAT)
Cessna Skymaster (AAT)
Fairchild Metro, former Météo-France (AAT) aircraft
HM-293, by Rodolphe Grunberg
Chagnes MicroStar, amateur-built aircraft, twin-jet version of Rutan VariViggen (AAT)
Saab J35OE Draken (AAT)
NEOBALLS / ZEN MAGNETS - Neodymium Magnetic Balls (@4205) - Starcraft II's Massive Thor
This is my most complex and largest build to date.
It was designed in parts: Cockpit body, then legs, then arms, then rear guns. Then I had to redesign parts when it came time to assemble it together because of incorrect bonding assumptions and misalignment of magnet fields.
Experimented with x-beam coupled bonds to get the maximum lateral strength with reinforcements on the sides. This proved to be very string. Created a X-Beam using similar methods producing a very strong leg structure. It was capable of support the entire weight of the cockpit body w/o a problem. Had to redesign the leg to cockpit body mount point from the earlier concept because the bond was not completely coupled.
Next up were the arm/guns ... the weight was too much for the cockpit body to support so I fashioned a pair of lego-platforms for them to rest on and take the weight off of the central body.
Finally ... the rear guns ... these were a challenge in that their original mount point design had to be reworked also to make them fit correctly into the rear of the cockpit body. I changed the mount points on the guns to fit the space on both sides and added a few support balls to improve the mount point bonds. I was very surprised how they were balanced and supported only by two point sections to the body. The guns stayed in place for a small series of photos.
The design flaw was in the side bonds of the beam to the legs. The coupled field held nicely for a short amount of time and would have held if it didn't have the weight of the rear guns to support. When they were standing upright and straight, all was good. As soon as I attempted to move the platform forward (to take a video), the rear guns tilted slightly backwards and and that was the end of the leg to body support bonds ... and created the dreaded implosion.
The rear gun weight caused the entire central body section to rotate backwards and fall back on the rear guns ... taking the arms in the process. Perhaps I should have created a Lego-support structure for the rear guns to remove the pendulum force backwards ... but that would have created another view blocker like the side Lego-platforms obstructed the view of the legs and feet. Not sure if I can recreate it for a rotational video ... this took over a week (on/off to design and assemble).
Overall ... I was very happy with the result ... hope I captured enough detail to warrant some visual recognition as a Starcraft II Thor reproduction/interpretation.
This was design and built for the Zen Magnets Contest 26: The Massive Thor
www.zenmagnets.com/blog/26-the-massive-thor/
I tried to document the info for this super complex build (below) accompanied by associated pics in this set
www.flickr.com/photos/tend2it/sets/72157632920071597/
Starcraft II Thor Magnet Count and Detail Talley
======+================
Cockpit Body bottom section: (@0520)
(@0217) - Main shape middle core = (2x108) + 1
(@0095) - central bottom layer 1 = (47x2) + 1 w/black parameter
(@0078) - Sides Bottom layer 2 = (2x(22 parallel pair frnt2bck support + 3 red + 4 gold + 10 ring outside black))
(@0028) - Central bottom layer 3 = (2x14) rectangle
(@0032) - Sides bottom layer 3 = (2x((2x5 parallel bridge rectangle to ring) + (6 ring outside))
(@0010) - Central bottom layer 4 = (10 ring) leg waist w/gold
(@0020) - Sides bottom layer 4 = (2x10 ring) coupled over parallel bridge for perpendicular underside support
(@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end)
------
Cockpit Body top section (from center out): (@0371)
(@0166) - top layer 1 = (2x83) w/black missle cover + middle sect separator
(@0105) - top layer 2 = ((2x52) + 1) w/black separator, red trim, gold cockpit
(@0083) - top layer 3 = ((2x41) + 1) w/black separator, red trim, gold cockpit
(@0037) - top layer 4 = ((2x18) + 1) w/black separator trim
(@0010) - top layer 5 = (2x5) w/red/black
------
(@0891)
Leg section x2 (@0640 - 12 removed from bottom of @ leg for foot contact pt)
leg internal structure:
(@0384) - columns = 2 x (4x((2x12) + ((2x11) + 2))) top/bottom coupled bonds w/parallel bonds stacked x 4))
(@0096) - side reinforcements = 2x((2x11) + 2) coupled pair along outside edge centers)
(@0032) - ball reinforcements = 2x(2x4 balls are two balls added to 4 ball in 2, 4, 6, 8th positions) - (12 @ bottom)
leg arch structure (connected to one flat leg top face:
(@0128) - (4x4 parallel sqr) + (2x(6 + 2)) pointy rings) + (4x4 parallel sqr) + (2x(6 + 2)) pointy rings)
Place the two leg arch structures together to form the leg arch
-------
(@1519) = 1531-12
Leg side panels (@0384)
(@0344) - (2 each leg x (2x(2x43 each side))) w/black outside trim
Knees + Leg detail
(@0040) - (2x(2x(6 + 2) knee w/red sqr) + 2x(4 red sqr top of leg))
-------
(@1903)
Feet x2 (@0242)
(@0184) - (2x((2x7 + 2 1st mid layer) + (2x(2x10 + 1) 2nd mid layer) + ((2x(2x8 + 1) outside layer))
(@0034) - (2x(2x(2x3 + 1 top of toe 2 leg)) + (1 center rear foot 2 leg conn) + (2 x 1 outer rear foot sides 2 leg
conn))
(@0024) - (2x(2x6 rings rear foot heel))
-------
(@2145)
X-Beam waist platform - (@0233 - 19) this part is placed across the center perpendicular to the x-beam leg arch
(@0214) - (2x(2x(18 + 17 + 6 + 3)) + (2x(7 + 2)) + ((8 + 1 front side) + (2x9 rear side)) + ((2 x 3 red front center) +
(2 x 2 red front sides) + (2 red rear)) - (19 removed under rear panel side to fold)
Arm Guns (2 pair per arm w/red + black accents)
(@0380) - (4x((4x9 center core) + (3x((2x7) + 1)) top/sides) + (2x7) middle join))
Shoulder to elbow core w/o reinforcements ((@0174)per arm)
(@0348) - (2 x (top((2x5)+2) + (4x8+2 parallel) + ((2x5)+2) + (2x5) + (2x(2x5)+1) + (2x(2x6)+1) + ((4x7)+2 parallel
mount2gun) + (1 ball center to bridge below 2 ball center to 1 ball) + ((2x6)+1) + ((2x4)+2)bottom)
Shoulder to elbow (per arm, per side)
(@0248) - (2 x (2 x (top 3 + 5 + 5 + 5 + 4 + 5 + 4 + 4 + 5 + (2x7arm2shoulder bridge) + (5 + 3 bottom))
Elbow to gun support (per arm, per side) (@0140 - 18 for outside facing side revamp)
(@0122) - (2 x (2 x (((2x9)+1) + (2x8)) -
Revamp outside facing sides for Z bracket (remove 2x(4 top/4 bottom/2 middle/move center ball down, add 1 ball)
Revamp 2 rear centerballs with red
(@028) - add red design outside facing shoulder 2 elbow
------
(@3485)
Rear Guns x2
Large cannon (@0112 each)
(@0224) - 2 x ((2x(2x15) + (4x(5+2)) + (4x(6 ring)))
Smaller cannon (@0092 each)
(@0184) - 2 x ((2x(2x13) + (4x(4+2)) + (4x(4 ring)))
Gun bridges (@0010 each)
(@0020) - (2 x (4 ring + 6 ring across two cannons)
Gun mounts x2
(@0104) - (2 x ((top (2x4+2) + (2x5+2) parallel to existing + (2x4+2) + (2x5 parallel) + (2x4+2) bottom)
Gun panel x 2 (@0102 each)
(@0204) - (2 x (2x(11 + 10 + 9 + 8 + 7 + 6))
-------
Revamp base
(@4221) subtotal b4 assembly
Assembly mods
-------------
Moved the (@0040) - Central rear Barrel = (4x8 ring w2 red rings) + (2x4 sqr end) below the rear of the body between
the leg mount and cockpit body. Actually used the barrel as a mount point for the rear guns.
Modded Cockpit Body bottom section (mount point):
(@0020) = (2 x (7 + 6 + 5)) = Changed = (@0028) - Central bottom layer 3 = (2x14) rectangle to covert parallel
rectangle to hex parallel center, coupled sides
-------
(@4213) = (@4221 - 8)
Moved central bottom layer x-beam
(@0018) = (2x09 ring) = Changed = (@0020) - Sides bottom layer 4 = shifted it down one row, removed 1 ball on end to form point and pinched outside end fit in center of 6 ball side.
(@4211) = (@4213 - 2)
Removed gold 10 ball ring mount
Changed = (@0010) = Central bottom layer 4 = (10 ring) leg waist w/gold
-------
(@4201) = (@4213 - 10)
Modded Rear Guns
(@0100) = Changed = Rear Gun mounts x2 - removed +2 from top/bottom mount point (2x4+2)=>(2x4)
(@4197) = (@4201-4)
Added extra mount point support bwtween rear gun mounts and rear cockpit body
(@4205) = (@4201+8)
Grand Total! = (@4205)
Grey Eagle - Hypersonic Bomber Mach 8 - 10, IO Aircraft www.ioaircraft.com
Length: 150'
Span: 71'
Engines: 4 U-TBCC (Unified Turbine Based Combined Cycle)
1 Air Breathing Aerospike
Fuel: Kero / Hydrogen
Payload: Up 36 2,000 LBS JDAM's, or 80,000 LBS
Range: 10,000nm + Aerial Refueling Capable
www.ioaircraft.com/hypersonic.php
-----------------------------
hypersonic bomber, hypersonic commercial aircraft, hypersonic commercial plane, hypersonic aircraft, hypersonic plane, hypersonic airline, tbcc, glide breaker, fighter plane, hypersonic fighter, boeing phantom express, phantom works, boeing phantom works, lockheed skunk works, hypersonic weapon, hypersonic missile, scramjet engineering, scramjet physics, boost glide, tactical glide vehicle, space plane, scramjet, turbine based combined cycle, ramjet, dual mode ramjetdefense science, missile defense agency, aerospike, hydrogen aircraft, airlines, military, physics, airline, aerion supersonic, aerion, spike aerospace, boom supersonic, , darpa, onr, navair, afrl, air force research lab, office of naval research, defense advanced research project agency, afosr, socom, arl, army future command, mda, missile defense agenci, dia, defense intelligence agency, air force of science and research,
-----------------------------
Unified Turbine Based Combined Cycle. Current technologies and what Lockheed is trying to force on the Dept of Defense, for that low speed Mach 5 plane DOD gave them $1 billion to build and would disintegrate above Mach 5, is TBCC. 2 separate propulsion systems in the same airframe, which requires TWICE the airframe space to use.
Unified Turbine Based Combined Cycle is 1 propulsion system cutting that airframe deficit in half, and also able to operate above Mach 10 up to Mach 15 in atmosphere, and a simple nozzle modification allows for outside atmosphere rocket mode, ie orbital capable.
Additionally, Reaction Engines maximum air breather mode is Mach 4.5, above that it will explode in flight from internal pressures are too high to operate. Thus, must switch to non air breather rocket mode to operate in atmosphere in hypersonic velocities. Which as a result, makes it not feasible for anything practical. It also takes an immense amount of fuel to function.
-------------
Advanced Additive Manufacturing for Hypersonic Aircraft
Utilizing new methods of fabrication and construction, make it possible to use additive manufacturing, dramatically reducing the time and costs of producing hypersonic platforms from missiles, aircraft, and space capable craft. Instead of aircraft being produced in piece, then bolted together; small platforms can be produced as a single unit and large platforms can be produces in large section and mated without bolting. These techniques include using exotic materials and advanced assembly processes, with an end result of streamlining the production costs and time for hypersonic aircraft; reducing months of assembly to weeks. Overall, this process greatly reduced the cost for producing hypersonic platforms. Even to such an extent that a Hellfire missile costs apx $100,000 but by utilizing our technologies, replacing it with a Mach 8-10 hypersonic missile of our physics/engineering and that missile would cost roughly $75,000 each delivered.
Materials used for these manufacturing processes are not disclosed, but overall, provides a foundation for extremely high stresses and thermodynamics, ideal for hypersonic platforms. This specific methodology and materials applications is many decades ahead of all known programs. Even to the extend of normalized space flight and re-entry, without concern of thermodynamic failure.
*Note, most entities that are experimenting with additive manufacturing for hypersonic aircraft, this makes it mainstream and standardized processes, which also applies for mass production.
What would normally be measured in years and perhaps a decade to go from drawing board to test flights, is reduced to singular months and ready for production within a year maximum.
Unified Turbine Based Combined Cycle (U-TBCC)
To date, the closest that NASA and industry have achieved for turbine based aircraft to fly at hypersonic velocities is by mounting a turbine into an aircraft and sharing the inlet with a scramjet or rocket based motor. Reaction Engines Sabre is not able to achieve hypersonic velocities and can only transition into a non air breathing rocket for beyond Mach 4.5
However, utilizing Unified Turbine Based Combine Cycle also known as U-TBCC, the two separate platforms are able to share a common inlet and the dual mode ramjet/scramjet is contained within the engine itself, which allows for a much smaller airframe footprint, thus engingeers are able to then design much higher performance aerial platforms for hypersonic flight, including the ability for constructing true single stage to orbit aircraft by utilizing a modification/version that allows for transition to outside atmosphere propulsion without any other propulsion platforms within the aircraft. By transitioning and developing aircraft to use Unified Turbine Based Combined Cycle, this propulsion system opens up new options to replace that airframe deficit for increased fuel capacity and/or payload.
Enhanced Dynamic Cavitation
Dramatically Increasing the efficiency of fuel air mixture for combustion processes at hypersonic velocities within scramjet propulsion platforms. The aspects of these processes are non disclosable.
Dynamic Scramjet Ignition Processes
For optimal scramjet ignition, a process known as Self Start is sought after, but in many cases if the platform becomes out of attitude, the scramjet will ignite. We have already solved this problem which as a result, a scramjet propulsion system can ignite at lower velocities, high velocities, at optimal attitude or not optimal attitude. It doesn't matter, it will ignite anyways at the proper point for maximum thrust capabilities at hypersonic velocities.
Hydrogen vs Kerosene Fuel Sources
Kerosene is an easy fuel to work with, and most western nations developing scramjet platforms use Kerosene for that fact. However, while kerosene has better thermal properties then Hydrogen, Hydrogen is a far superior fuel source in scramjet propulsion flight, do it having a much higher efficiency capability. Because of this aspect, in conjunction with our developments, it allows for a MUCH increased fuel to air mixture, combustion, thrust; and ability for higher speeds; instead of very low hypersonic velocities in the Mach 5-6 range. Instead, Mach 8-10 range, while we have begun developing hypersonic capabilities to exceed 15 in atmosphere within less then 5 years.
Conforming High Pressure Tank Technology for CNG and H2.
As most know in hypersonics, Hydrogen is a superior fuel source, but due to the storage abilities, can only be stored in cylinders thus much less fuel supply. Not anymore, we developed conforming high pressure storage technology for use in aerospace, automotive sectors, maritime, etc; which means any overall shape required for 8,000+ PSI CNG or Hydrogen. For hypersonic platforms, this means the ability to store a much larger volume of hydrogen vs cylinders.
As an example, X-43 flown by Nasa which flew at Mach 9.97. The fuel source was Hydrogen, which is extremely more volatile and combustible then kerosene (JP-7), via a cylinder in the main body. If it had used our technology, that entire section of the airframe would had been an 8,000 PSI H2 tank, which would had yielded 5-6 times the capacity. While the X-43 flew 11 seconds under power at Mach 9.97, at 6 times the fuel capacity would had yielded apx 66 seconds of fuel under power at Mach 9.97. If it had flew slower, around Mach 6, same principles applied would had yielded apx 500 seconds of fuel supply under power (slower speeds required less energy to maintain).
Enhanced Fuel Mixture During Shock Train Interaction
Normally, fuel injection is conducted at the correct insertion point within the shock train for maximum burn/combustion. Our methodologies differ, since almost half the fuel injection is conducted PRE shock train within the isolator, so at the point of isolator injection the fuel enhances the combustion process, which then requires less fuel injection to reach the same level of thrust capabilities.
Improved Bow Shock Interaction
Smoother interaction at hypersonic velocities and mitigating heat/stresses for beyond Mach 6 thermodynamics, which extraordinarily improves Type 3, 4, and 5 shock interaction.
6,000+ Fahrenheit Thermal Resistance
To date, the maximum thermal resistance was tested at AFRL in the spring of 2018, which resulted in a 3,200F thermal resistance for a short duration. This technology, allows for normalized hypersonic thermal resistance of 3,000-3,500F sustained, and up to 6,500F resistance for short endurance, ie 90 seconds or less. 10-20 minute resistance estimate approximately 4,500F +/- 200F.
*** This technology advancement also applies to Aerospike rocket engines, in which it is common for Aerospike's to exceed 4,500-5,000F temperatures, which results in the melting of the reversed bell housing. That melting no longer ocurrs, providing for stable combustion to ocurr for the entire flight envelope
Scramjet Propulsion Side Wall Cooling
With old technologies, side wall cooling is required for hypersonic flight and scramjet propulsion systems, otherwise the isolator and combustion regions of a scramjet would melt, even using advanced ablatives and ceramics, due to their inability to cope with very high temperatures. Using technology we have developed for very high thermodynamics and high stresses, side wall cooling is no longer required, thus removing that variable from the design process and focusing on improved ignition processes and increasing net thrust values.
Lower Threshold for Hypersonic Ignition
Active and adaptive flight dynamics, resulting in the ability for scramjet ignition at a much lower velocity, ie within ramjet envelope, between Mach 2-4, and seamless transition from supersonic to hypersonic flight, ie supersonic ramjet (scramjet). This active and dynamic aspect, has a wide variety of parameters for many flight dynamics, velocities, and altitudes; which means platforms no longer need to be engineered for specific altitude ranges or preset velocities, but those parameters can then be selected during launch configuration and are able to adapt actively in flight.
Dramatically Improved Maneuvering Capabilities at Hypersonic Velocities
Hypersonic vehicles, like their less technologically advanced brethren, use large actuator and the developers hope those controls surfaces do not disintegrate in flight. In reality, it is like rolling the dice, they may or may not survive, hence another reason why the attempt to keep velocities to Mach 6 or below. We have shrunken down control actuators while almost doubling torque and response capabilities specifically for hypersonic dynamics and extreme stresses involved, which makes it possible for maximum input authority for Mach 10 and beyond.
Paradigm Shift in Control Surface Methodologies, Increasing Control Authority (Internal Mechanical Applications)
To date, most control surfaces for hypersonic missile platforms still use fins, similar to lower speed conventional missiles, and some using ducted fins. This is mostly due to lack of comprehension of hypersonic velocities in their own favor. Instead, the body itself incorporates those control surfaces, greatly enhancing the airframe strength, opening up more space for hardware and fuel capacity; while simultaneously enhancing the platforms maneuvering capabilities.
A scramjet missile can then fly like conventional missile platforms, and not straight and level at high altitudes, losing velocity on it's decent trajectory to target. Another added benefit to this aspect, is the ability to extend range greatly, so if anyone elses hypersonic missile platform were developed for 400 mile range, falling out of the sky due to lack of glide capabilities; our platforms can easily reach 600+ miles, with minimal glide deceleration.
***UPDATE*** Casey and Nika need to maximize storage with a clearly defined space. This was the easy choice.
The Lockheed F-117A Nighthawk was developed in responde to an Air Force request for an aircraft capable of attacking high value targets whitout being detected by enemy radar.By the 1970s,new materials and techniques allowed enginees to design an aircraft with radar-evading or "stealth" qualities.The result was the Lockheed F-117A Nighthawk,the would's first operational stealth aircraft.
The first Lockheed F-117A Nighthawk flew on June 18,1981,an the first Lockheed F-117A Nighthawk unit,the 4450 Tactical Group (renamed the 37th Tactical Fighter Wing in October 1989),archived initial operating capablity in October 1983.The Lockheed F-117A Nighthawk first saw combat during Operation Just Cause on December 19,1989,when two Lockheed F-117A Nighthaks from the 37th Tactical Fighter Wing attacked military targets in Panama.
The Lockheed F-117A Nighthawk again went into action during Operation Desert Shield and Operation Desert Storm in 1990-1991 when the 415th Tactical Fighter Squadron and the 416th Tactical Fighter Squadron of the 37th Tacical Fighter Wing moved to a base in Saudi Arabia.During Operation Desert Storm,Lockheed F-117a Nighthawks flew 1,271 sorties,achiving an 80 percent mission success rate,and suffered no losses or battle damage.A totle of 59 Lockheed F-117A Nighthawks were built between 1981 and 1990.In 1989 the Lockheed F-117A Nighthawk was awarded thwe Collier Trophy,one of the most prized aeronautical awards in the world.
The Lockheed F-117A Nighthawk built and was specially modified for systems testing.In 1991 after its testing program was completed.It marked as it appeard during tests conducted for the Air Force Systems Command between 1981 and 1991.
Boeing B-52
------------------
After it became operational in 1955,the Boeing B-52 Stratofortress remamained the main long-gange heavy bomber of the U.S.Air Force during the Cold War,and continues to be an important part of the U.S.Air Force bomber force today.Nearly 750 were built before production ended in October 26,1962; 170 these were Boeing B-52D Stratofortresses.
Boeing B-52 Stratofortress had set numerous records in its many years of service.On January 18,1958,three Boeing B-52B Stratofortresses completed the first non-stop round-the-world flight by jet aircraft,lasting 45 hours and 19 minutes and rquired only three aerial refueling.It was also a Boeing B-52 Stratofortress that made the first airborne hydrogen bomb drop over Bikini Atoll,Island on May 21,1956.
In June 1965 Boeing B-52 Stratofortresses entered combat in Southeast Asia.By 1973,the had flown 126,615 combat sorties with 17 Boeing B-52 Stratofortresses lost to enemy action.
The Boeing B-52D Stratofortresss saw extensive action in Southeast Asia an was severely damaged by an enemy surface-to air missile on April 9,1972.In December 1972,after being repaired,it flew four addional missions over North Vietnam.
Built by the Schiffswerks Rieherst company in Hamburg, the Umbria was launched on December 30th 1911 with the name of Bahia Blanca. It was a large freighter by that time, 150 meters long, with a power capable of providing a speed of 14 knots that could carry 9,000 tons of cargo and up to 2,000 passengers. In 1912 it began operating the Hamburg-America line doing different jobs between Europe and Argentina until the outbreak of World War I, when it was based in Buenos Aires. In 1918 the ship was acquired by the Argentinian government and it was not until 1935 when the ship was taken over by the Italian government and renamed again: the Umbria. From that moment its trips were to transport troops and during the following two years carried several thousand soldiers to the Italian colonies in East Africa.
The loss of the Umbria
In May 1940, when Italy was still neutral in World War II, the Umbria was secretly loaded with 360,000 bombs between 15 kg and 100 kg, 60 boxes of detonators, building materials and three Fiat Lunga cars, carrying a total 8,600 tons of weapons towards the East Africa. The explosives had destination Massawa and Assab, Eritrea, that was Italian colony by then, and the rest of the cargo was heading different locations in Asia. Italy's entry into the war was imminent and this shipment was destined to the defense of the colonies against the Allies and to the possible expansion of its African territories.
On 3rd June 1940 the Umbria reached Port Said, northern Egypt, where loaded with 1,000 tons of coal and water in a movement to fool the Allies, trying to look like a harmless freighter. The port, controlled by the Royal Navy, and its authorities allowed the ship enter on the Red Sea three days after arrival. The British delayed the departure of the Umbria knowing that Italy's entry into the war was imminent and that the cargo of Umbria had devastating power that sooner or later would be used against the Allies and why not, to get a great load to fight fascism. But Italy, as a neutral country that it was, had every right to transport weapons much like any other cargo to its colonies.
Having met the deadline to be retained, the Umbria crossed the Suez Canal on June 6th but with the escort of the HMS Grimsby. The importance and destructive capacity of the cargo required it. Three days later the Umbria entered in Sudan waters and the HMS Grimsby ordered the Umbria captain to anchor on Wingate Reef under the pretext of searching for contraband. Moments later the British warship HMS Leander arrived with a group of 20 sailors who boarded the Umbria. After thoroughly searching the ship and finding nothing, the captain ordered the British troops to remain the night aboard the Umbria.
The next morning Lorenzo Muiesan, Umbria captain, was in his cabin listening to the radio when Mussolini announced the entry of Italy into the World War II. Hostilities would begin at midnight of that day. Muiesan, a very patriotic captain with long experience, was the only one in the area who had heard the news and knew immediately that both Umbria and the burden would be used by the Allies against their own country. He had no option to disable both. In a move of extraordinary intelligence, as the hours passed retained by the British who did not yet know that Italy was officially the enemy, the captain ordered his crew conducting a rescue simulation... that was more real than the British thought. This maneuver, which the English soldiers agreed as they believed it would serve to further delay the departure of the Umbria. While the Italians occupied the lifeboats, the chief engineers, following Muiesan´s orders, opened all the valves and drown the ship to the bottom of the reef. With the crew safe, the British only had time to get on their ship and watch the freighter slid slowly.
When the captain of HMS Grimsby asked why he had done that Muiesan confirmed the declaration of war from Italy to Britain. The next day Muiesan and the rest of Umbria crew departed detainees to India, where they spent four years in prison.
CARGO:
The Umbria was carrying 360,000 individual aircraft bombs ranging in size from 15, 50 and 100 kg. The vessel also carried a large quantity of fuses, ammunition and detonators as well as other traditional cargo. The captain knew these bombs would be confiscated and used by the enemy against his country should they ever discover them which was why he made the call to sink the ship.
The Umbria had sailed in June 1940 with 6,000 tons of bombs, 60 boxes detonators, explosives, weapons and three Fiat 1100 Lunga from Genoa via Livorno and Naples in the Suez Canal and on the way via Massaua and Assab to Calcutta.
SCAMP is an extremely capable small boat; at 11 feet 11 inches in length. The boat was designed by well-known New Zealand designer John Welsford for the magazine Small Craft Advisor, hence its name - Small Craft Advisor Magazine Project, or SCAMP. www.smallcraftadvisor magazine.com
The Northwest School of Wooden Boatbuilding (www.nwboatschool.org) hosted the third SCAMP Camp (sm) March 4th - 15th, 2013 at the Northwest Maritime Center in Port Townsend WA. www.nwmaritime.org/
The next SCAMP Camp is scheduled in the same location August 5th - 16th, 2013; check the School's website for details. We'll announce 2014 SCAMP Camp dates later this spring.
This SCAMP Camp (sm) is taught by well-known small boat adventurer Howard Rice. SCAMP's designer, New Zealander John Welsford, will help to teach the August 2013 SCAMP Camp (sm).
During the March class, 6 SCAMPs are being built from CAD kits cut by Turnpoint Design of Port Townsend during the March 2013 workshop, and a total of ten students participated in the class. Students came from as far away as Germany and from Vermont, Montana, Oregon and other locations across the US to attend the class.
The Northwest School of Wooden Boatbuilding is located in Port Hadlock WA and is a private, accredited non-profit vocational school. You can find us on the web at www.nwboatschool.org .
Our mission is to teach and preserve the fine art of wooden boatbuilding and traditional maritime crafts. We build both commissioned and speculative boats for sale while teaching students boatbuilding the skills they need to work in the marine trades.
We also teach a variety of workshops throughout the year, of which SCAMP Camp (sm) is one.
You can reach us via e-mail at info@nwboatschool.org or by calling us at 360-385-4948.
Luis is the stay-at-home dad while Alisa earns the main salary to support their family. Their family would not function in the smooth way that it does without their choreographed teamwork: Alisa working hard at her job while Luis holds things together at home and at school as well as working part-time himself. Their decision to add another child to the family was something they considered very carefully, not only because of the additional costs of raising another child but also because of the additional burden on Luis as the primary caregiver. All the work is shared between them in a delicate balance that relies on each of their strengths, and they love their family life even though there are days where they both collapse in exhaustion and wonder how they will do it all again the next day. The kids are the main focus in their lives, though they still find time occasionally to have friends over and play music or games, or just hang out and talk about how to deal with the kids.
Luis is a great cook and enjoys cooking for the family. Coming over for dinner at their house is likely to be a treat of Puerto Rican food and lots of laughter. Finances are always tight and Alisa strains to balance their budget while still finding ways to let the kids have piano lessons, ride horses and host parties where they can invite all their friends over for an end of summer pool party that gets rained out. (The kids had a good time anyway, throwing water balloons at Luis in the rain.)
In 1935, the Imperial Japanese Navy issued a requirement for a monoplane carrier-based torpedo bomber that would also be capable of carrying bombs. Nakajima won the contract with its B5N design, which first flew in 1937. The prototype was considered slightly too complicated for carrier operations of the time, and it was simplified for production as the B5N1.
The B5N immediately won over crews, who liked its easy handling and steady performance, which made it both a superb torpedo bomber and level bomber. Speed was not considered a factor, as torpedo bombers were usually slow--torpedoes could not be dropped at high speed--and would require fighter escort in any case. A single .30 caliber machine gun was provided for self-defense. However, experience over China showed that the B5N was helpless against even the second-rate fighters used by the Chinese Air Force: like many Japanese aircraft, sacrificing weight for range left the B5N without armor or self-sealing fuel tanks. One or two hits would destroy the aircraft. Unfortunately for the Japanese, adding armor would reduce the aircraft's already slow speed even further, not to mention its range--and Japanese carrier doctrine emphasized hitting the enemy beyond the range of enemy counterattacks. The best Nakajima could do was to upgrade the engine in the B5N2, to make it somewhat faster.
Though considered obsolete by December 1941, the B5N2 was still the backbone of the IJN's Carrier Striking Force. For the Pearl Harbor attack, B5Ns were equipped with torpedoes in the first wave and a mix of torpedoes and bombs in the second. The aircraft would do the most damage of any Japanese aircraft in the attack: armed with the best torpedoes in the world--the Type 91 Long Lance--B5Ns sank the USS Oklahoma and severely damaged the California, West Virginia and Nevada. The Arizona may have been sunk by a B5N using armor-piercing bombs in the level bombing role, though the loss was also attributed to Aichi D3A dive bombers.
For the next two years, B5Ns--codenamed "Kate" by the Allies--would wreak havoc on Allied ships, contributing to the loss of no less than three American carriers and several other vessels. However, as the US Navy began to field more effective fighters and antiaircraft guns, the B5N began to suffer heavy casualties--it could not escape or defend itself against fighters, and now its escorting Mitsubishi A6M Zeroes were shot down as well. Ironically, the B5N's ability to carry torpedoes or bombs may have contributed to the Japanese loss at Midway, as Admiral Chuichi Nagumo kept delaying attacks while he considered one ordnance load or another, with lethal results for the Carrier Striking Force.
The IJN recognized the B5N's vulnerability and were already working on a replacement by 1942--the B6N Tenzan, codenamed "Jill"--but the B6N was delayed due to engine problems, and then by US bombing. The B6N never replaced the B5N; though the latter was relegated to antisubmarine duties in 1944, it was brought back in its original role from land bases, and as a kamikaze.
The heavy casualties taken by B5N crews during the war ensured that few of the 1268 produced survived to the end; those that did were scrapped. Today, no complete B5N survives, though some have been reconstructed from wrecks to partial aircraft.
When I began teaching my World War II class, Dad began building models for it. He had wanted to build a B5N for awhile in any case. This is the Hasegawa 1/72 scale B5N2. Dad intended this to be in the colors of Mitsuo Fuchida, who led the attack on Pearl Harbor; Fuchida's aircraft carried distinctive red and yellow formation markings on the tail, but Dad had not finished decaling the model before he passed away in October 2013. Unlike many IJN aircraft, Fuchida's aircraft had dark green uppersurfaces over the standard light gray underside. The single red stripe on the fuselage indicates an aircraft from the carrier Akagi.
This image is a picture of majestic-looking Bailey and a capable young handler, who is riding bareback in this shot. To use Nancy's (Bailey's owner) own words, "This picture... captures all there is between that young woman and her horse." Bailey is a sweet, gentle and lovable and loving horse. Although she is a large and strong, her owner once told me that she is somewhat small for her Percheron breed. Percherons are a breed of draft horse. Well muscled and known for their intelligence and willingness to work, they were originally bred for use during wars because of their size and strength.
Nancy had asked me to take some pictures of Bailey. In this shot, a ripening soybean field with yellowing leaves and the Walt's horse barn form a backdrop. Nancy had dolled up Bailey for the photo shoot--and I shot over 1,000 pictures. I found the experience to be challenging but definitely fun. Landscapes don't tend to move as much as a horse does. :D
IMG_0043
© Stephen L. Frazier - All of my images are protected by copyright and may not be used on any site, blog, or forum without my permission.
Looking for Steve Frazier''s main photography website? Visit stevefrazierphotography.com
Contact him at stevefrazierphotography@gmail.com
MIKOYAN-GUREVICH MIG-19S
The first Soviet production fighter capable of supersonic speeds in level flight, the prototype MiG-19 (NATO code-name "Farmer") made its first flight in September 1953. Entering production in 1955, it became the Soviet Union's primary fighter during the last half of the 1950s. Possibly as many as 10,000 MiG-19s, in various versions, were built by the Soviet Union, China, Poland and Czechoslovakia. Many other countries used the MiG-19, including Cuba, North Vietnam, North Korea, Iraq and most of the Warsaw Pact nations. The Soviet Union phased out the MiG-19 in the early 1960s in favor of the more advanced MiG-21, but other nations continued to use the MiG-19 for many more years.
The museum obtained MiG-19S on display from the 457th Technical Evaluation Squadron based at Nellis Air Force Base, Nev. It went on display in October 1994.
TECHNICAL NOTES:
Armament: Three NR-30 30mm cannon
Engines: Two Tumansky RD-9 turbojets with 7,165 lbs. thrust each
Maximum speed: 903 mph
Span: 30 ft. 2 in.
Length: 40 ft. 3 in.
Height: 12 ft.
Weight: 19,096 lbs. maximum
Ideum builds our ruggedized aluminum multitouch tables on-site in our Corrales studio. Our experienced staff handles all aspects from construction to tech support. Ideum worked with the Cooper-Hewitt Smithsonian Design Museum to create these 84" 4K multitouch tables for The New Cooper Hewitt Experience, open to the public on December 12, 2014.
Learn more at www.ideum.com and www.cooperhewitt.org/new-experience
The Annual British Truck Racing Championship Made its way Back to The Brands Hatch Circuit for its Season Finale Marking the End of Motorsport for the Season.
With a Massive Firework Display on the Sunday and Plenty of on and Off Track Action The Weekend was Shaping up to be One to Remember.
Many Drivers and Support Races were also Present from the small Yet Nimble Legends Cars to the Much Bigger and more Powerful 1000 Break Horse Power Racing Trucks that will be doing Battle on the circuit Saturday was Looking like a Really Good Start to a Weekend of Speed Madness and Awesome Racing.
Speaking of which Lets take a Look and See what Qualifying will Hold for Each Support and Main Race and Find out who Will be Taking Pole for The First Races of The Weekend.
Legends Cars Championship (Qualifying)
First Up is the Famous and Fan Favourite Legends Cars Championship, Thease Little Tiny Machines Run Yamaha Motorbike Engines within them that run up to 1200/1250cc Depending on the Spec of Engine. They also are 120 Break Horse Power and with how Light Weight they are (1,325lbs Including The Driver) Thease Cars are Very Quick and Very Nimble.
Lets Find Out who came where in Qualifying and Who Will be Starting on the Front Row.
In First Place Taking Pole and The Fastest Lap was (Chris Needham) in his Legend Coupe 1250 with a Best Lap Time of 55.691 and a Top Speed of 78.08mph. Amazing Work there Chris Well Deserved and Super Job for Pole Position.
In Second Place was (Will Gibson) in his Legend 34 Ford Coupe 1250 with a Best Lap Time of 55.721 and a Top Speed of 78.04mph. Superb Job there Will Fighting Hard and Very Nearly Taking Pole from Chris.
In Third Place was (John Mickel) in his Legend 34 Ford Coupe 1250 with a Best Lap Time of 55.740 and a Top Speed of 78.01mph. Amazing Work John Pushing that Legend Hard and Securing P3 on the Gird for the Race Super Job.
Three Very Fast and Capable Drivers in Chris Will and John All Fighting it out with their Fellow Competitors for The Victory Come the First Race but who will be Brave enough to Take on the Top 3 Fastest Drivers out there? We will Have to Wait and See.
Junior Saloon Car Championship (Qualifying Part 1)
Next Up we Have The Junior Saloon Car Championship a Racing Series Designed for Much Younger Drivers (Between 14 and 17 Years of Age) who want to try their Hand in Motorsport from a Young Age.
Thease Drivers are Mostly Fearless and always Provide some Very Intense and Incredible Racing Due to their Competitive Nature and Determination to Win and Succeed.
The Cars Used for This Series are Citroen Saxo VTR'S that are 1600cc In Terms of Power Meaning that Every Driver is on a Level Playing Field when the Racing Starts making for some Close Wheel to Wheel Action and Really showing who the Most Skilled and Quickest Drivers out there are.
Speaking of Which Lets Get straight to Qualifying and see who was the Most Fearless and Managed to Clock an Incredible Lap During Qualifying.
In First Place Taking Pole Position and The Fastest Lap was (Charlie Hand) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.554 and a Top Speed of 74.26mph. In credible Driving there Charlie Very Precise and Controlled Thought the Entire Lap to Secure P1 on the Gird Amazing Job.
In Second Place was (Jamie Petters) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.661 and a Top Speed of 74.13mph. Great Work there Jamie Pushing Hard and Securing that P2 Spot on the Front Row of the Gird Superb Job.
In Third Place was (Harvey Caton) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.685 and a Top Speed of 74.10mph. Incredible Drive there Harvey Pushing The Car and Fighting All the While to Defend that P3 on the Gird.
What an Incredibly Talented array of Drivers in Charlie Jamie and Harvey All Battling it out with their Fellow Competitors to try and Win the Championship and get those All Important Points they Need which could make up the Difference. Qualifying Second Fastest is up Next so lets take a look and see Who will come out on Top.
Junior Saloon Car Championship (Qualifying Second Fastest)
Following the Results from The First Qualifying Session the Second Qualifying Session Will see all the Drivers Go out again to Better their Lap Times and Maybe even Allow some New Competitors to Move up the Order into the Podium Places.
Lets Take a Look and See if Charlie Hand has managed to Hold onto His P1 Position on the Grid.
In First Place Taking Pole Position and The Fastest Lap was (Charlie Hand) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.639 and a Top Speed of 74.15mph. Another Incredible Lap from Charlie Hand Putting Himself Once Again on Pole for The First Race for The Junior Saloon Car Championship. Congratulations Charlie.
In Second Place was (Will Redford) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.851 and a Top Speed of 73.89mph. Great Drive there from Will Securing P2 and Adding a New Driver to the Top of the Standings. Great Work.
In Third Place was (Jamie Petters) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.861 and a Top Speed of 73.87mph. Fantastic Work there Jamie Really Pushing the Car Hard and Taking that Third Position Away from Harvey on the Gird. Nice Job.
Another Really Intense Qualifying Session which has seen the Likes of Charlie Will and Jamie all Emerge Victoriously on the Front Row but out of All Three of Thease Very Talented Drivers only one of them Can take The Race Win but who is it going to be?
CTCRC Racing For Marshals (Qualifying)
Next Up was The CTCRC Racing For Marshals Race a Very Special Support Race added to the Weekend at the Last Moments to Congratulate and Commemorate the Important Safety and Work each and Every Marshal of the Circuit does where ever they go and What Ever the Circuit.
The Orange Army as they are Known as take out their Time on Weekends to Volunteer at Race Meets Marshalling the Races to ensure Driver Safety is a Top Priority in the Sport and that Rules are being Adhered to.
From Volunteers who Clean the Track after Each Race to Flag Wavers to Incident Respondents and even Vehicle Recovery The Orange Army is always on Standby For When Anything goes Wrong. They Have a Passion for Motorsport that Cannot be Matched and a Community that is still Going Strong to this Day all over the Country.
The Race itself Features a Wide Variety of Cars from Honda Civic EG2000 to Ford Escort MK1 Mexico's to even Aston Martin V8 Vantages. Each and Every Car has its Strengths and Weaknesses when it comes to Power and Control.
Lets take a Look at Qualifying and see who Managed to Taim their Beast and take that All Important P1 Spot on the Gird for Race 1.
In First Place taking Pole Position and the Fastest Lap was (Samuel Wilson) in his Aston Martin V8 Vantage with a Best Lap Time of 52.087 and a Top Speed of 83.48mph. Phenomenal Drive there Samuel Really Working Hard to Keep the Car on the Track and Utilise all that Important Horse Power.
In Second Place was (Gary Prebble) in his Honda Civic EG2000 with a Best Lap Time of 52.672 and a Top Speed of 82.56mph. Great Work there Gary Pushing Hard and Ensuring that P2 is Secure on the Gird. Great Driving.
In Third Place was (Mike Saunders) in his Ford MK1 Escort Mexico with a Best Lap Time of 52.837 and a Top Speed of 82.30mph. Fantastic Work there Mike Great Job and Well Done for Securing P3 on the Grid.
A Really Fantastic Trio of Drivers in P1 P2 And P3 in the Likes of Samuel Gary and Mike all Pushing Hard and Making their Mark Amongst their Fellow Drivers but will anyone Else be able to challenge them and Potentially take that All Important P1 Spot Right Out from Underneath them? Stay Tuned to Find Out.
Pickup Truck Championship (Qualifying Part 1)
Pickup Trucks made their way out onto the Circuit Next and With some Very Fast and Capable Machinery in each of thease Cars Expect to see Very Fast Lap Times and a Lot of High Speed Action.
The Pickup Trucks themselves are Made out of a Space Frame with the Bodies on all the Trucks Just being either Plastic or Fibreglass which Helps to Reduce Weight and Allows for some Very Quick Lap Times around the Circuit.
Engine Specifications for the Pickup Trucks Includes a 2.0 Litre Engine Capable of 220 Break Horse Power and Much like The Legends Cars they are Still Very Nimble at High Speeds Resulting in Full concentration and Skill to ensure Victory on the Race Track.
Lets Look to Qualifying and see what Happened and who will be On Pole for the First of Two Qualifying Sessions This is Part 1.
In First Place taking Pole and the Fastest Lap was (Matt Wills) in his Pickup Truck 2000 with a Best Lap Time of 52.358 and a Top Speed of 83.05mph. Great Drive there Matt Pushing Hard and Keeping the Truck Pointing in the Right Direction at All Times. Great Work.
In Second Place was (Matt Simpson) in his Pickup Truck 2000 with a Best Lap Time of 52.529 and a Top Speed of 82.78mph. Well Done Matt P2 and a Super Drive from you as well.
In Third Place was (Dean Tompkins) in his Pickup Truck 2000 with a Best Lap Time of 52.593 and a Top Speed of 82.68mph. Well Done Dean A Really Good Drive and Fending off David O' Regan to take that All Important P3 on the Grid.
Another Incredible Display of Car Control and High Speed Action from the Two Matt's and Dean for what I'm Sure will be a Fantastic First Race when the Lights Go Out but for Now its onto Qualifying Part 2 to see if Any of the Fastest Drivers Can Improve or Move their Positions on the Gird to a Better Starting Spot.
Pickup Truck Championship (Qualifying Part 2)
For Part 2 of This Qualifying Session the Top 20 Fastest Drivers Battle it out for Another Chance to either Improve or Defend their Position from the First Qualifying Session.
Lets take a Look and see How Dean and the Two Matt's go on Did they Stay where they Were or Have they Moved About a bit and Allowed a New Driver to take Pole for the Race?
In First Place taking Pole and The Fastest Lap was (Mark Willis) in his Pickup Truck 2000 with a Best Lap Time of 52.358 and a Top Speed of 83.05mph. Congratulations Mark P1 and a Front Row Start on the Gird for Race 1. Incredible Lap.
In Second Place was (Matt Simpson) in his Pickup Truck 2000 with a Best Lap Time of 52.529 and a Top Speed of 82.78mph. Another Fantastic Lap there Matt Hanging onto P2 on the Grid and Matching Your Previous Fastest Time. Great Stuff.
In Third Place was (Dean Thomas) in his Pickup Truck 2000 with a Best Lap Time of 52.593 and a Top Speed of 82.68mph. Fantastic Work there Dean Keep Hold of that P3 on the Grid and Defending Well from P4's David O' Regan.
What a Superb Bit of Driving from Each of the Top Three in Mark Matt and Dean Thease Three Really Know How to Push their Pickup Trucks to the Limit and Race them Right on the Edge of what is Possible Around this Circuit. Looking Forward to the First Race and to see who can make their Mark on the Weekend First.
British Truck Racing Championship (Qualifying)
Finally it was Time for The Heavy Weights to make their way out onto the Circuit and with 1000 Break Horse Power under each of the Drivers Right Foot This will Surely be a Qualifying Session of who is Brave Enough to Push their Truck to the Limit and Take Pole Position for Race 1 of the Weekend.
In First Place taking Pole Position and The Fastest Lap was (Ryan Smith) in his Mercedes Actros 12000 with a Best Lap Time of 1:00.232 and a Top Speed of 72.19mph. Brilliant Driving from Ryan Really Pushing on and Getting the Job Done to Secure the First Pole Position for Truck Racing this Weekend. Fantastic Drive.
In Second Place was (Stuart Oliver) in his Volvo VNL 13000 with a Best Lap Time of 1:00.949 and a Top Speed of 71.34mph. Well Driven there Stuart Keeping the Volvo Out of Trouble and Taking a Well Deserved P2 Spot on the Grid.
In Third Place was (David Jenkins) in his Man TGX 12000 with a Best Lap Time of 1:01.146 and a Top Speed of 71.11mph. Great Drive there David Really Well Done that's P3 on the Grid.
Three Incredible Drivers in Ryan Stuart and David all Pushing themselves Hard and Getting Ready for what Will be a Super First Race for the Trucks. To All the Other Truck Racers and Support Racers taking Part Good Luck and May the Best Man Win.
Legends Cars Championship (Race 1 Results)
After a Very Hectic Qualifying Session which saw Chris Needham Will Gibson and John Mickel in First Second and Third Place it was Time for Race 1 and to see out of the Top 3 Drivers as well as the Rest of the Drivers who could take that All Important Race Victory.
In First Place Taking the Win was (Sean Smith) in his Legend 34 Ford Coupe 1250 with a Best Lap Time of 56.515 and an Average Speed of 50.17mph. Congratulations Sean Really Well Driven and Held together for that Impressive Victory.
In Second Place was (Stephen Whitelegg) in his Legend Coupe 1250 with a Best Lap Time of 56.352 and an Average Speed of 50.17 mph. Superb Driving from Stephen and a Fantastic P2 Finish on the Podium.
In Third Place was (John Mickel) in his Legend 34 Ford Coupe with a Best Lap Time of 56.160 and an Average Speed of 50.16mph. Great Driving There John P3 and The Final Step on the Podium.
What an Amazing First Race that was for The Legends Cars Championship with the Likes of Sean Stephen and John all Taking Superb Victories and Battle Through the Field. Good Luck to all other Drivers and Lets see what Race 2 Brings.
Legends Cars Championship (Race 2 Results)
After a Really Intense Battle at the Top End of the Field it was Time once again for the Legends Cars and their Drivers to Head out onto the Circuit for Race 2.
In First Place Taking the Win was (Will Gibson) in his Legend 34 Ford Coupe with a Best Lap Time of 55.548 and an Average Speed of 77.28mph. Phenomenal Drive there Will Pushing Hard through the Field to take a Very Well Deserved Race Win. Congratulations.
In Second Place was (Miles Rudman) in his Legend 34 Ford Coupe with a Best Lap Time of 55.541 and an Average Speed of 77.25mph. Great Drive there Miles Pushing Yourself and The Car Thought the entire Race and Securing P2.
In Third Place was (Mike Schlup) in his Legend 34 Coupe with a Best Lap Time of 55.638 and an Average Speed of 77.07mph. Great Driving there Mike Nicely Done and P3 on the Podium Super Job.
Another Amazing Race which saw the Likes of Will Miles and Mike all Taking Victories with a Superb Display of Driving from Each of them and some Very Competitive Action thought the Race from other Drivers too. Race 3 is Up Next and who will take the Final Race Victory of the Day for The Legends Championship?
Legends Cars Championship (Race 3 Results)
The Final Legends Race of Saturday and with so Many Different Drivers Winning such as Will Gibson Sean Smith would anybody else be able to take on thease Top Level Drivers and Bring Home Glory to their Team?
Lets Find Out
In First Place taking the Victory was (John Mickel) in his Legend 34 Ford Coupe with a Best Lap Time of 56.016 and an Average Speed of 63.83mph. Amazing Job John Really Pushing the Car to its Limits in this Last Race and Taking Home the Spoils and The Glory. A Really Nice way to End The First Days Racing Congratulations.
In Second Place was (Paul Simmons) in his Legend 34 Ford Coupe with a Best Lap Time of 55.801 and an Average Speed of 63.81mph. Nice Work Paul A Really Solid Race and a Great Finish for a First Days Racing at Brands Hatch.
In Third Place was (Jack Parker) in his Legend 34 Ford Coupe with a Best Lap Time of 55.682 and an Average Speed of 63.54mph. Really Great Drive Jack 3rd Place and Fantastic to see a New Winner on the Podium for Legends Racing Really Well Deserved.
What an Incredible First Day of Racing it has been for the Legends Championship and with another Three Races to come on Sunday the Action will continue to Intensify. A Big Congratulations to all of the Race Winners in John Paul Jack Stephen Mike Miles and Sean who all Drove Insanely Well and Well Done to all of the other Drivers out there. Keep Pushing and Never Give Up.
Junior Saloon Car Championship (Race 1 Results)
The First Race for the Junior Saloon Cars Championship is Up Next and After seeing Charlie Hand Dominate the Field in Qualifying Will any other Driver be able to Stop Him.
Lets Find Out
In First Place taking the Victory was (Charlie Hand) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.995 and an Average Speed of 61.36mph. Phenomenal Job Once Again Charlie Putting on a Super Display of Driving Skill and Speed to Dominate Your way to Victory from Lights to Flag. Amazing Drive.
In Second Place was (Will Redford) in his Citroen Saxo VTR 1600 with a Best Lap Time of 58.981 and an Average Speed of 61.33mph. Really Well Driven there Will Chasing Down Charlie Right till the End and Still Finishing an Incredible Second Place. Congratulations.
In Third Place was (Jamie Petters) in his Citroen Saxo VTR 1600 with a Best Lap Time of 59.392 and an Average Speed of 60.74mph. Great Drive there Jamie A Lot of Hard work and Dedication to achieve that Third Position Fighting off Ruben Hage in a Thrilling Battling Side by Side. Well Done.
A Fantastic Opening Race for the Junior Saloon Car Championship with the likes of Charlie Hand coming out Victorious Once Again with Will Redford in Second Place and Jamie Petters in Third.
A Quick Mention of that Incredible Battle Between Jamie and Ruben for 3rd Place What a Phenomenal Bit of Driving from thease Two Young Drivers as they went Side by Side Continuously for Three Straight Laps before Jamie took that All Important P3 with a Move at Paddock Hill Bend. Great work to Ruben too a Phenomenal Drive for P4.
Looking Forward to some More Intense Racing Action from thease Two as Well as all the other Drivers in This Series on Sunday Until Then Good Luck and Keep Racing!
CTCRC Racing For Marshals (Race 1 Results)
After a Brilliant Qualifying Session which saw Samuel Wilson in his Aston Martin V8 Vantage take Victory Over Gary Prebble and Mike Saunders it was Time to see what the CRTC Drivers could get up to and who could take their First Victory in Race 1.
In First Place Taking Victory was (Scott Kirwan) in his Reno Clio 2000 with a Best Lap Time of 58.832 and an Average Speed of 72.98mph. Amazing Drive there Scott A Well Deserved Victory to take First Place.
In Second Place was (Keith Evans) in his Alpha Romeo Alpfasud with a Best Lap Time of 1:03.789 and an Average Speed of 67.70mph. Great Work there Keith Really Pushing Hard and Taking a Well Deserved P2 in the Race. Fantastic Work.
In Third Place was (Nathan Berrisford) in his BMW 1800ti with a Best Lap Time of 1:03.752 and an Average Speed of 67.53mph. Great Work from Nathan To Achieve Third Place and take that Final Step on the Podium Congratulations.
A Really Great First Race for the CTCRC Showcasing some Impressive Machinery and some Really Amazing Drivers in Scott Keith and Nathan All Taking Superb Victories on DAY 1. Good Luck to all of the other Drivers out their your Time Will Come, Keep Racing and Pushing your Team and Yourself to Go Further.
Pickup Truck Championship (Race 1 Results)
Next Up The Pickup Trucks Made their way out onto the Circuit and after Seeing what thease Drivers could do in Qualifying it was Mark Willis who took Pole Position in the Second Fastest Qualifying Category with Matt Simpson in Second Place and Dean Thomas in Third. Who Will be Able to Challenge each of the Top Three?
Lets Find Out
In First Place taking the Race Win and the Fastest Lap was (Dean Thompkins) in his Pickup Truck 2000 with a Best Lap Time of 52.051 and an Average Speed of 81.70mph. Congratulations Dean Really Well Done and a Fantastic Drive thought the entire Race.
In Second Place was (Paul Thompkins) in his Pickup Truck 2000 with a Best Lap Time of 52.402 and an Average Speed of 81.68mph. Superb Job there Paul Working Really Hard and Trying to Stay Close to Dean Most of The Time as Well.
In Third Place was (Matt Simpson) in his Pickup Truck 2000 with a Best Lap Time of 52.519 and an Average Speed of 81.65mph. Really Well Done Matt Fantastic Drive with a Few Sideways Moments and Securing P3 on the Podium.
A Really Exciting First Race for the Pickup Trucks as they Battled it out to see who could take that All Important Victory and become a Race Winner. Huge Congratulations to Dean Paul and Matt for putting on One Hell of a Great Race and to All the other Pickup Truck Drivers who showed their Skills and Racing Passion while Competing. Looking Forward to Sunday and More Track Action from This Lot.
British Truck Racing Championship (Race 1 Results)
Lastly for the Saturday was The British Truck Racing Championship and after a Really Aggressive Qualifying Session it was Time for each Driver to put their Skills to the Test and Battle it out for a Victory.
With Ryan Smith in Pole Position Stuart Oliver in Second and David Jenkins in Third This Race is Going to be One Hell of a Good Race to Witness.
In First Place taking the Victory was (Ryan Smith) in his Mercedes Actros 12000 with a Best Lap Time of 58.945 and an Average Speed of 72.21mph. Congratulations Ryan Really Well Deserved and a Fantastic Victory for Race 1.
In Second Place was (David Jenkins) in his Man TGX 12000 with a Best Lap Time of 1:00.159 and an Average Speed of 71.48mph. Amazing Job there David Taking your P3 Position in Qualifying and Turning it into a P2 Finish at the End of the Race Great Drive.
In Third Place was (John Newell) in his Man TGS 12000 with a Best Lap Time of 1:00.718 and an Average Speed of 70.64mph. Nice Work John Pushing the Truck Hard and Fending off Martin Gibson to take a Well Deserved Third Place.
Super Racing From the British Truck Racing Championship with Many Side by Side Battles Taking Place thought the Race and Lots of Sideways Action to Round off the Saturday Here at Brands Hatch.
A Big Congratulations to Ryan Smith David Jenkins and John Newell who all Drove Very Well and Showed what a True Championship Like Drive is in one of thease Monstrous Trucks. Well Done to all of the other Truck Racers who also Took Part Hoping to see some New Faces on the Top Step of the Podium Come Sunday.
For Now See You ALL Then!
Douglas A-4 Skyhawk is a carrier-capable attack aircraft developed for the United States Navy and United States Marine Corps. The delta winged, single-engined Skyhawk was designed and produced by Douglas Aircraft Company, and later by McDonnell Douglas. It was originally designated the A4D under the U.S. Navy's pre-1962 designation system. The Skyhawk is a light-weight aircraft with a maximum takeoff weight of 24,500 pounds (11,100 kg) and has a top speed of more than 600 miles per hour (970 km/h). The aircraft's five hardpoints support a variety of missiles, bombs and other munitions and was capable of delivering nuclear weapons using a low altitude bombing system and a "loft" delivery technique. The A-4 was originally powered by the Wright J65 turbojet engine; from the A-4E onwards, the Pratt & Whitney J52 was used. Skyhawks played key roles in the Vietnam War, the Yom Kippur War, and the Falklands War. Fifty years after the aircraft's first flight, some of the nearly 3,000 produced remain in service with several air arms around the world, including from the Brazilian Navy's aircraft carrier, São Paulo.
AMARG (or the Boneyard) is the world's largest aircraft and missile storage and maintenance facility in Tucson, Arizona. I took these pictures during a bus tour in June 2008.
A világ legnagyobb repülőgép és rakéta tároló és karbantartó létesítménye az Arizona állambeli Tucson-ban. A hely csak idegenvezetett autóbuszos túrán tekinthető meg, mi is így jártunk itt 2008. júniusban.
The 309th Aerospace Maintenance and Regeneration Group (AMARG), often called The Boneyard, is a United States Air Force aircraft and missile storage and maintenance facility in Tucson, Arizona, located on Davis-Monthan Air Force Base. AMARG takes care of more than 4,400 aircraft on 11 km2, which makes it the largest aircraft storage and preservation facility in the world. AMARG holds aircarft for future use, sales to friendly governments, or parts reclamation. Stored aircraft go through the following treatments: removing guns, ejection seat charges, or classified hardware. Draining its fuel system. Sealing it from dust, sunlight, and high temperatures by using high tech vinyl plastic compounds, Spraying an opaque white color on it, or using simple garbage bags. AMARG is a controlled-access site, and is off-limits to anyone not employed there without the proper clearance. The only access to AMARG for non-cleared individuals is via a bus tour.
Built by the Schiffswerks Rieherst company in Hamburg, the Umbria was launched on December 30th 1911 with the name of Bahia Blanca. It was a large freighter by that time, 150 meters long, with a power capable of providing a speed of 14 knots that could carry 9,000 tons of cargo and up to 2,000 passengers. In 1912 it began operating the Hamburg-America line doing different jobs between Europe and Argentina until the outbreak of World War I, when it was based in Buenos Aires. In 1918 the ship was acquired by the Argentinian government and it was not until 1935 when the ship was taken over by the Italian government and renamed again: the Umbria. From that moment its trips were to transport troops and during the following two years carried several thousand soldiers to the Italian colonies in East Africa.
The loss of the Umbria
In May 1940, when Italy was still neutral in World War II, the Umbria was secretly loaded with 360,000 bombs between 15 kg and 100 kg, 60 boxes of detonators, building materials and three Fiat Lunga cars, carrying a total 8,600 tons of weapons towards the East Africa. The explosives had destination Massawa and Assab, Eritrea, that was Italian colony by then, and the rest of the cargo was heading different locations in Asia. Italy's entry into the war was imminent and this shipment was destined to the defense of the colonies against the Allies and to the possible expansion of its African territories.
On 3rd June 1940 the Umbria reached Port Said, northern Egypt, where loaded with 1,000 tons of coal and water in a movement to fool the Allies, trying to look like a harmless freighter. The port, controlled by the Royal Navy, and its authorities allowed the ship enter on the Red Sea three days after arrival. The British delayed the departure of the Umbria knowing that Italy's entry into the war was imminent and that the cargo of Umbria had devastating power that sooner or later would be used against the Allies and why not, to get a great load to fight fascism. But Italy, as a neutral country that it was, had every right to transport weapons much like any other cargo to its colonies.
Having met the deadline to be retained, the Umbria crossed the Suez Canal on June 6th but with the escort of the HMS Grimsby. The importance and destructive capacity of the cargo required it. Three days later the Umbria entered in Sudan waters and the HMS Grimsby ordered the Umbria captain to anchor on Wingate Reef under the pretext of searching for contraband. Moments later the British warship HMS Leander arrived with a group of 20 sailors who boarded the Umbria. After thoroughly searching the ship and finding nothing, the captain ordered the British troops to remain the night aboard the Umbria.
The next morning Lorenzo Muiesan, Umbria captain, was in his cabin listening to the radio when Mussolini announced the entry of Italy into the World War II. Hostilities would begin at midnight of that day. Muiesan, a very patriotic captain with long experience, was the only one in the area who had heard the news and knew immediately that both Umbria and the burden would be used by the Allies against their own country. He had no option to disable both. In a move of extraordinary intelligence, as the hours passed retained by the British who did not yet know that Italy was officially the enemy, the captain ordered his crew conducting a rescue simulation... that was more real than the British thought. This maneuver, which the English soldiers agreed as they believed it would serve to further delay the departure of the Umbria. While the Italians occupied the lifeboats, the chief engineers, following Muiesan´s orders, opened all the valves and drown the ship to the bottom of the reef. With the crew safe, the British only had time to get on their ship and watch the freighter slid slowly.
When the captain of HMS Grimsby asked why he had done that Muiesan confirmed the declaration of war from Italy to Britain. The next day Muiesan and the rest of Umbria crew departed detainees to India, where they spent four years in prison.
CARGO:
The Umbria was carrying 360,000 individual aircraft bombs ranging in size from 15, 50 and 100 kg. The vessel also carried a large quantity of fuses, ammunition and detonators as well as other traditional cargo. The captain knew these bombs would be confiscated and used by the enemy against his country should they ever discover them which was why he made the call to sink the ship.
The Umbria had sailed in June 1940 with 6,000 tons of bombs, 60 boxes detonators, explosives, weapons and three Fiat 1100 Lunga from Genoa via Livorno and Naples in the Suez Canal and on the way via Massaua and Assab to Calcutta.
DAY 2 of the Formula Ford 50th Anniversary Race Weekend and after a Really Fast Action Packed array of Cars in both Mazda and Formula Ford Racing and Qualifying on Saturday it was time for Sunday and to find out who would be Crowned the Formula Ford Champion of 2021.
AMOC GT / GT4 & Intermarque (Qualifying)
First up on the Sunday for Qualifying was The AMOC GT/GT4 Championship and with a Grid of Just 5 Cars for this One its going to be Very Interesting to see out of the 5 Drivers who Can set the Quickest Pace During Qualifying. Lets Find Out who took Pole and the Fastest Lap.
In First Place taking Pole Position and the Fastest Lap was the Duo Pair of Rikki Cann and Samuel Wilson) in their Aston Martin V8 Vantage with a Best Lap Time of 1:00.791 and a Top Speed of 71.53mph. Fantastic Work both Ricky and Rob Really Pushing the Aston Martin Hard and Gunning fort that All Important Victory come the First Race.
In Second Place was (Jamie Sturges) in his VW Golf TCR with a Best Lap Time of 1:03.245 and a Top Speed of 68.75mph. Amazing Work there Jamie Pushing that Golf and Racing it Like a Pro.
In Third Place was the Duo of (Whit and Fenn) in their Lotus Elise Motorsport with a Best Lap Time of 1:04.089 and a Top Speed of 67.85mph. Great Work there Whit and Fenn Fantastic Driving and Great Team Work.
Three Very Quick and Capable Cars in the Hands of Some Very Competitive Drivers will make for a Really Fantastic Race. With all three Cars Having Different Power Outputs it will be Interesting to see what Techniques Each of them will use to their Advantage Come the First Race.
AMOC GT / GT4 & Intermarque (Race 1)
After a Very Quick and Heated Qualifying Session which saw the Duo of Rikki Cann and Samuel Wilson Take Pole Position will Jamie and the Duo of Whit and Fenn be able to Beat them off the Line and Who Will Take Home their First Victory of the Weekend?
In First Place Taking the Victory was (Rikki Cann) in his Aston Martin V8 Vantage with a Best Lap Time of 58.194 and an Average Speed of 73.41mph. Amazing Job there Ricky Really Working Hard Behind the Wheel to Keep that Aston in the Lead Thought the Entire Race with some Beautifully Controlled Driving as well.
In Second Place was (Andy Thompson) in his Seat Toledo with a Best Lap Time of 57.893 and an Average Speed of 73.35mph. Incredible Drive there Andy Really Well Done and Making sure to hold onto that All Important Second Place.
In Third Place was (Paul Whight) in his Lotus Elise Motorsport with a Best Lap Time of 57.284 and an Average Speed of 72.75mph. Superb Drive from Paul Really Looked like he was Enjoying that Drive and Kept Pushing Hard the Whole Way around the Race Track. His Smooth Driving Through Clearways was Amazing to see.
What an Amazing First Race for the AMOC GT Championship with Many Different Cars from Many different Manufacturers Taking Part it always a Joy to see both the Cars and their Drivers Happy Doing what they Love to do. With One Last Race to go will the Likes of Rikki Cann's Teammate Samuel Wilson be able to Hold on and Get One More Victory for the Team? Lets Find Out.
AMOC GT / GT4 & Intermarque (Race 2 FINAL)
In First Place taking the Final Win of the Day for AMOC GT was (Rob Fenn) in his Lotus Elise Motorsport) with a Best Lap Time of 50.083 and an Average Speed of 83.82mph. Congratulations Rob what a Drive and What a Car Fantastic Work.
In Second Place was (Samuel Wilson) in his Aston Martin V8 Vantage with a Best Lap Time of 51.459 and an Average Speed of 80.50mph. Amazing Driving there Samuel Keeping Close to Rob on Many Occasions around the Circuit and a Cracking Overtake on Rob through Clearways.
In Third Place was (Julian Reddyhough) in his Aston Martin Vantage with a Best Lap Time of 59.552 and an Average Speed of 71.18mph. Super Driving From Julian Smooth through the Corners and Making sure to Hang onto that Third Place During the Entirety of the Race.
A Really Fantastic Two Races for the AMOC GT Championship here this Weekend while the Grid might not have been up to Full Capacity We saw the Likes of Rob Fenn Samuel Wilson Rikki Cann and Julian Reddyhough take some Incredible Victories thought the Two Races. Congratulations to All of you and Good Luck to all other Drivers who were Taking Part. Keep Pushing Hard and Victory Will Come to You.
BRSCC Mazda MX5 Championship (Race 1)
Next Up was the BRSCC Mazda MX5 Championship and with Saturdays Qualifying showing a Huge Grid of 35 Cars this was Definitely going to be a Fantastic Race to Witness. Lets get right to it and Find Out who Took Victory and by How Much.
In First Place taking the Victory was (Brian Trott) in his Mazda MX5 MK1 with a Best Lap Time of 58.179 and an Average Speed of 73.82mph. Super Work there Brain Racing Against another 34 Competitors in Identical Cars and Winning takes Incredible Driver Skill and Talent and you Really Showed that During the Race. Congratulations.
In Second Place was (Oliver Allwood) in his Mazda MX5 MK1 with a Best Lap Time of 57.532 and an Average Speed of 73.81mph. Well Done Oliver Fantastic Driving and a Really Great Defence of Second Place thought the entire Race.
In Third Place was (Zak Oates) in his Mazda MX5 MK1 with a Best Lap Time of 58.020 and an Average Speed of 73.79mph. Really Nice Work there Zak Amazing Drive and Keeping Very Close to Oliver and Brain at the Front of the Gird thought. Brilliant Driving.
What a Race with Three Incredible Drivers in the likes of Brian Oliver and Zak All Pushing their Cars to the Limit and Achieving Superb Results for Race 1. Good Luck to all other Drivers Lets See if Race 2 of the Day Might Turn things Around.
BRSCC Mazda MX5 Championship (Race 2)
After a Thrilling and Nail Biting Race 1 which saw Brian Trott take the Victory with Oliver Allwood in Second and Zak Oates in Third Place will anyone Else be able to Challenge thease Three Very Fast and Talented Drivers? Lets Find Out.
In First Place taking the Overall Victory was (Steve Foden) in his Mazda MX5 MK1 with a Best Lap Time of 1:07.517 and an Average Speed of 63.32mph. Congratulations Steve a Well Deserved Victory and Another Brilliant Trophy to add to the Cabinet at Home. Congratulations.
In Second Place was (Oliver Allwood) in his Mazda MX5 MK1 with a Best Lap Time of 1:07.789 and an Average Speed of 63.17mph. Brilliant Work Once Again Oliver taking Second Place and Racing with Everything you could Possibly Get out of that Car. A Future Mazda Champion in the Making no Doubt. Brilliant Drive.
In Third Place was (Luke Pullen) in his Mazda MX5 MK1 with a Best Lap Time of 1:07.835 and an Average Speed of 63.14mph. Well Done Luke Really Fantastic Driving in Very Damp and Bright Conditions.
Another Amazing Race for the Mazda MX5 Championship with the Likes of Steve Foden Oliver Allwood and Luke Pullen all taking Incredible Victories thought Race 2 and Standing on the Podium. Keep Up the Amazing Work you Three and to Everyone Else Keep Working Towards Those Goals of Victory and Success.
With One Final Race Coming Up will Steve Foden be able to Hang on and Take Another Victory for 1st Place or will the Likes of Luke and Oliver try to Steal it away from Him? Lets Find Out.
BRSCC Mazda MX5 Championship (Race 3 FINAL)
In First Place taking the Last Victory of the Day for the BRSCC Mazda MX5 Championship was (Michael Knibbs) in his Mazda MX5 MK1 with a Best Lap Time of 58.656 and an Average Speed of 72.84mph. Congratulations Michael A Very Strong Drive with a Lot of Ambition Behind the Wheel. What a Fantastic Way to End off the Weekend.
In Second Place was (Jack Brewer in his Mazda MX5 MK1 with a Best Lap Time of 57.970 and an Average Speed of 72.82mph. Great Drive Jack Pushing Hard and Making Sure to Keep Up with Michael at the Front of the Grid. A Very Committed and Determined Drive.
In Third Place was (Brian Trott) in his Mazda MX5 MK1 with a Best Lap Time of 58.293 and an Average Speed of 72.75mph. Well Done Brian Great Driving and it looked like you were Having a lot of Fun out there and always Remember that its the Love and the Passion that Counts not Just The Race Victory.
What a Weekend it has been for the BRSCC Mazda MX5 Championship. We Have Witnessed Many Talented Drivers from the Likes of Brain Trott and Jack Brewer to Steve Foden and Oliver Allwood as well as Zak Oates. All thease Incredible People Come Here every Year to Share their Passions for what they Love not Just with the Teams and Crew but also the Spectators. Here's to Hoping that a New Generation can be Inspired to follow in their Footsteps and Keep the Legacy of this Great Racing Series Going Now and Well into the Future.
BRSCC Mazda MX5 SuperCup Championship (Race 2)
The Mazda MX5 Super Cup Championship was next Up and after A Whole Day of Qualifying and Qualifying Second Fastest on Saturday it was time to see what Each of the Drivers could do and How they would use their Style and Race Craft to Gain a Victory. With Another Large Grid of 30 Cars Anything Can Happen and Racing always has its Moments of Unpredictability.
In First Place taking the Victory was (Declan Lee) in his Mazda MX5 MK3 with a Best Lap Time of 1:07.272 and an Average Speed of 45.71mph. What a Drive from Declan in Very Wet and Near Impossible Visibility Conditions He Kept his Foot Down and Head up to Take an Incredible Victory. Congratulations Declan.
In Second Place was (Richard Amos) in his Mazda MX5 MK3 with a Best Lap Time of 1:06.697 and an Average Speed of 45.70mph. Brilliant Driving there Richard Keep Pace with Declan Really Well and Navigating in Almost Blind Conditions shows Just How Incredible of a Driver you are.
In Third Place was (John Langridge) in his Mazda MX5 MK3 with a Best Lap Time of 1:07.831 and an Average Speed of 45.68mph. Brilliant Work out there John a True Rain Master of Brands Hatch Keeping the Car on Track and some Truly Incredible Pace from you.
What an Insane Race with Wet and Rainy Weather Conditions Really Mixing the Grid Up and Showing who the Very Talented Drivers are that can Push their Machinery Beyond its Limits in the Wet and Still take Victory. Some Incredible Drivers in the likes of Declan Richard and John Braving it out there to Deliver some Truly Fantastic Wet Weather Performances. Well Done to all the other Drivers as Well thease Conditions are Always Unpredictable and Yet you All put on a Brave Face and Drive like true Gentlemen Thought.
With Race 3 The Final Race Coming up who will be able to take the Last Podium for Mazda SuperCup? Lets Find Out.
BRSCC Mazda MX5 SuperCup Championship (Race 3 FINAL)
The FINAL Race for Mazda SuperCup and with Some Incredible Racing Witnessed in the Rain in the Previous Race would this Last Race Shake things up further? Lets See.
In First Place Taking the Victory was (Jack Harding) in his Mazda MX5 MK3 with a Best Lap Time of 56.785 and an Average Speed of 61.14mph. Super Work there Jack Taking the Victory and the Fastest Lap. Well Done.
In Second Place was (Patrick Fletcher) in his Mazda MX5 MK3 with a Best Lap Time of 56.820 and an Average Speed of 61.05mph. Great Work there Patrick Really Great Effort and a Super Drive for Second Place.
In Third Place was (James Cossins) in his Mazda MX5 MK3 with a Best Lap Time of 56.839 and an Average Speed of 61.04mph. Amazing Driving there James Racing Hard and Holding on Tightly to that All Important Third Place Finish.
Another Incredible Set of Races from the Mazda's to Round of a Brilliant Days Racing for All Drivers Competing in the Mazda Classes. Another set of Incredible Victories for the likes of Jack Patrick and James who all showed their Talent Skill and Determination for Victory.
However We are Not Done Yet as the Grand Finale of Races for this Weekends Formula Ford Championship is Coming Up Next and After a Hectic and Very Competitive Day of both Qualifying and Racing on Saturday With Multiple Races to be Decided Who would be Crowed the Formula Ford Festival Champion?
BRSCC Formula Ford Festival (Semi Final Race 1 Result)
Here we are Now at The Semi Finals after a Very Action Packed Last Chance Race and Now with a Gird of 26 Drivers and Cars This Race as Well as Two More Will Decide the 2021 Formula Ford Champion. Lets See First Who Took Victory in Race 1 for the Semi Finals.
In First Place was (Niall Murray) in his Van Diemen BD21 with a Best Lap Time of 1:01.661 and an Average Speed of 56.48mph. Brilliant Work Niall Congratulations on P1 after a Heroic Drive.
In Second Place was (Neil McLennan) in his Spectrum KMR with a Best Lap Time of 1:01.640 and an Average Speed of 56.41mph. Superb Work there from Neil to take P2 He Really Enjoys this Track and Loves to Race as Quickly as he Can alongside his Fellow Friends and Competitors.
In Third Place was (Jamie Sharp) in his Medina Sport JL17 with a Best Lap Time of 1:01.157 and an Average Speed of 56.37mph. Congratulations Jamie a Really Fantastic Drive and Keeping Very Close to Neil During the Whole Race. Here's Hoping for an Epic Duel in the FINALE Between you two.
With the First of Two Semi Final Races Over Niall Murray is the Winner with Neil McLennan in Second Place and Jamie Sharp in Third Place. Currently Jamie Can Still Win the Championship but will both the likes of Neil and Nial try Something in Race 2 of the Semi Finals to Gain Back their Chances of Becoming Champion? Lets Find Out.
BRSCC Formula Ford Festival (Semi Final Race 2 Result)
In First Place was (Joey Foster) in his Firman 2021 with a Best Lap Time of 1:01.302 and an Average Speed of 69.96mph. Fantastic Driving Joey Really Well Done and a Super Victory for you Indeed.
In Second Place was (Oliver White) in his Medina Sport JL17 with a Best Lap Time of 1:01.124 and an Average Speed of 69.67mph. Congratulations Oliver P2 and Super Car Control During the Race and a Stunning Formula Ford.
In Third Place was (Thomas Mills) in his Spectrum KMR with a Best Lap Time of 1:01.154 and an Average Speed of 69.66mph. Fantastic Work Thomas Well Driven with Amazing Car Control and Tight through the Corners at Clearways.
Another Brilliant Final for Formula Ford with the Likes of Joey Oliver and Thomas all Taking Victories. A Huge Congratulations to Everyone Else who was also Competing in both of Thease Finals. Keep Working on the Car and Training as Much as you can To Improve Lap Times and Strike when the Moment is right on Track for Victory.
BRSCC Formula Ford Festival (GRAND FINAL) (GRAND FINAL CHAMPIONSHIP RACE RESULTS ONLY NOT OVERALL FORMULA FORD 2021 GRAND FINAL CHAMPIONSHIP RESULTS)
This is it the Grand Final of the Formula Ford Festival Race Weekend and With Jamie Sharp Being Potentially One Race away From Taking the Title it has come down to the wire and this Last Race will Determined who The New Formula Ford Grand Final Champion of 2021 is.
In First Place Taking the Grand Final Championship Crown is (Jamie Sharp) in his Medina Sport JL17 with a Best Lap Time of 50.918 and an Average Speed of 66.77mph. Congratulations Jamie a Truly Champion Like Drive to Secure The Title of 2021 Formula Ford Grand Final Champion and Some Brilliant Drives all Season for a Well Deserved Victory in Formula Ford.
In Second Place was (Maxwell Esterson) in his Ray GR18 with a Best Lap Time of 51.116 and an Average Speed of 66.76mph. A Truly Competitive Drive there Maxwell Second in The Championship Standings and Something to be Very Proud of Phenomenal Driving.
In Third Place was (Andre Castro) in his Ray GR15 with a Best Lap Time of 51.137 and an Average Speed of 66.73mph. Superb Driving there Andre with P3 in the Standings and a Well Deserved Place in Formula Ford History.
Jamie Sharp is The New 2021 Formula Ford Grand Final Champion After a Heroic Battle Thought the Season He has Emerged Victorious. Congratulations Jamie you Really Deserve This Championship and all the Hard Work you Have done has Really Paid off. Both Maxwell and Andre also Did a Phenomenal Job and together All Three of you will Make History and Inspire Future Generations to come and Have a Go at Formula Ford.
Now Lets take a Look at the Overall GRAND FINAL Championship Standings for Formula Ford 2021
In First Position was (Jamie Sharp) in his Medina Sport JL17
In Second Position was (Neil McClennan) in his Spectrum KMR
In Third Position was (Maxwell Esterson) in his Ray GR 18
The Overall Formula Ford National Championship Pro 2021 was Won by (Chris Middlehurst) in his Van Diemen LA10 with 433 Points A Really Incredible Achievement Chris and a Strong Drive Thought The Whole Season
In Second Place on 431 Points was (Alex Walker) in his Spectrum 011 Superb Job there Alex Well Deserved
In Third Place on 414 Points was (Max Esterson) in his Ray GR18 Fantastic Work Max Phenomenal Driving Thought The Season
And This Concludes The Weekend at Brands Hatch's Formula Ford 50th Anniversary Weekend. This Weekend will be Remembered for a Long Time Coming and to All The Drivers who Took the Crowns in their Respective Championships. Congratulations. To All other Drivers Keep Working at it your Time Will Come.
See You All Again Next Year for Another Competitive and no Doubt Incredible Season of Formula Ford Racing at Brands Hatch.
The two seat F-4 Phantom was introduced by the McDonnell Aircraft in 1960. The carrier capable all weather, long-range interceptor, fighter / fighter bomber saw extensive service in the Vietnam War. Navy F-4 pilots shot down 24 enemy MIGS in 1972 alone. A land based model of the aircraft was flown by the U.S. Air Force.
The aircraft in the photograph was built as an F4H-1 model and was later redesignated as an F-4B-20 model. The aircraft has the identification marking of Fighter Squadron 161, the Chargers, and the Midway.