View allAll Photos Tagged browser

a regular sight on Middle Meadow Walk (and sometimes at events like the Canal Festival etc), had a few browses for music and DVDs myself through this chap's stall, always enjoyable to pause on a walk and have a rummage, see what little gem you might find. Also fun to lurk nearby and get a couple of candid street shots too :-)

veeeb is a software for the quick search and further processing of media.

 

Via drag&drop you can put images on zour desktop or in your personal “myBag” from where they can be exported to MS Word or PowerPoint.

 

www.veeeb.com/

  

www.magcloud.com/browse/Issue/131607

 

This is the first document in a series of unknown length recording the shifting landscape of the ‘Eastside’ areas of Birmingham. Including intersecting regeneration projects and plans for leisure, learning and transport developments, these are places with varying characters, histories and aspirations that are very much in flux.

 

Originating as a critical questioning of the branding of a version of Eastside as the Cultural Quarter and of her relationship to it (or not) as an artist, Nikki Pugh instigates actions that prompt her – and others – to notice the details that reveal themselves with the passing of time.

 

Document One: 2009 comprises details of an artwork by Pugh, photographs contributed by participants of a Walk and Talk event and also texts by Ben Waddington, Joe Holyoak and Tracey Fletcher.

 

npugh.co.uk/tag/eastside/

My other half browsing at Sephora at Chinook Centre. Didn't end up buying anything but she was willing to take a step back and one to the right so she was in the mirror.

The Women’s Studio Workshop invites the community to come in from the cold and warm up with our 15th annual Chili Bowl Fiesta Fundraiser at the Rosendale Recreation Center, where friends can browse and buy from a vast selection of handmade bowls and enjoy a helping of hearty chili generously donated by Hudson Valley restaurants and chefs

 

Not only will Fiesta guests get to enjoy live entertainment, raffle drawings, and the satisfaction of supporting locally crafted ceramics, but bowl-buyers will also be able to make immediate use of their new wares with a complementary serving of delicious, piping hot chili. Over 20 local chefs and restaurants donate more than 50 gallons of both meaty and vegetarian/vegan chili to the event.

It's a great feeling when you can add "works great" after every browser listed, except for three (IE7 untested, IE3 untested, IE4 small render issue).

 

I made this Sticky note sample for re-use purposes.

It was 2 hrs romance in the woods!

Browse milkvetch (Astragalus cibarius), Pea family (Fabaceae).

Red Butte area, near Salt Lake City, Utah.

 

To Share a Photo on Social Media:

1. Click on the set you would like to browse

2. Click on a specific photo

3. Click on the square with an arrow coming out on the ride lower side of the screen

4. Click on the Facebook icon in the popup window

4. Follow instructions in pop-up window

 

To Download a Photo:

1. Click on the set you would like to see (Awards, Pre/Post Race, Finish, etc.)

2. Click on a specific photo from the set

3. Click the three bubbles on the right side of the screen which is next to the square with arrow coming out.

4. Click the photo sizes you would like and then click download.

Photoshoot at Sequoya Library showcasing currently available or coming services during the COVID-19 pandemic. Includes staff and customers modeling curbside pickup service, computer services, phone service, safe use of the library when libraries reopen, etc. February 2021. Photographer: Shanna Wolf.

Jake and Parke: Husband and wife team in our Chinese New Year tasting

Visit www.etsy.com/shop/chichime to browse more designs and make one of these hats yours today!

 

Custom color orders welcome!

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Meticulously handmade and detailed to perfection.

 

Lucille is the epitome of sassy vintage fashion. This olive green chapeau is cheeky and ultimately stylish.

 

The hand attached felt bow is the perfect touch, a subtle flair!

 

The hat stays in place with a tortoise side comb, attached with a beautifully hand sewn stitch.

  

Taken at Windmill Farms in Nipomo, California. My sister and I spent all morning browsing with our cameras. More shots to come:)

I just went in there to browse and I got to try out a load of gear! All saved on my memory card of course. The bigger cameras like 1Ds MkIII were fairly hard to get the hang of, but it was good fun and really interesting.

Homepage settings for GHC09. All the online communities that I'm a part of open.

To Share a Photo on Social Media:

1. Click on the set you would like to browse

2. Click on a specific photo

3. Click on the square with an arrow coming out on the ride lower side of the screen

4. Click on the Facebook icon in the popup window

4. Follow instructions in pop-up window

 

To Download a Photo:

1. Click on the set you would like to see (Awards, Pre/Post Race, Finish, etc.)

2. Click on a specific photo from the set

3. Click the three bubbles on the right side of the screen which is next to the square with arrow coming out.

4. Click the photo sizes you would like and then click download.

یک قدم مانده به پائیز

Uploaded with the Flock Browser

See the ORIGINAL size to read the settings.

 

Lately, I've been spending most of my web-time on Flickr. I changed my settings in Firefox, because I didn't like the white background - especially in the evening. It's difficult to see photos (especially dark ones), when they are surrounded by a bright white background.

 

To get to these settings in Firefox, go to Tools --> Options --> Fonts & Colors. Besides changing the colors, I set my font sizes higher because I use 1600 x 1200 screen resolution. It's nice for viewing pics, but not for reading! :)

 

The down-side to this is that ALL of your pages will display this way. Any font colors or other nuances on some webpages may not be apparent when using these settings.

 

Also, if a page has a white or bright picture as a background, you may have trouble reading it due to the white font.

Blank bookcover with clipping path

Trisquel 3.5 features a new Mozilla 3.5 based browser

Casus Belli — это короткосессионный тактический шутер. В начале игры новичку даётся простенький китайский корвет и предлагается отправиться на полигон в Солнечной системе для сражения команда на команду. По-результатам сражения, пилоты получают деньги и опыт на развитие.

 

Сайты игры www.casus-belli.com/ru/?s=100011

[b]About the (conversion) project:[/b]

After a long hiatus an anime character model again! This Rei Ayanami figure was inspired by a photo-realistic illustration I found while browsing A.I.-generated artwork at playground.com, and the respective artwork was created by a prompt from someone called “YCTt”.

 

I liked the less anime-esque style of the character, and the red-and-white plugsuit design with many colorful contrasts, and saved the artwork as an inspiration – until I recently felt the urge to build “something different” from my usual what-if military vehicles and went through my stock of resin anime character kits to find a suitable “canvas”.

 

I eventually settled upon a 1:6 scale model of Rei Ayanami in her authentic white plugsuit, even though it’s a more anime-ish rendition and not so “realistic” as the A.I. illustration. The kit is just a recast and I had preferred a smaller scale, but I found that the figure’s upright standing pose and the plugsuit’s rather simple style would be a good starting basis.

The parts were cast well, without bubbles and with almost no seams, but details and edges not particularly crisp. The white resin material was not very dense either, everything felt light and a bit delicate – but not brittle. However, the kit was quite cheap, and you get what you pay for – and that was/is not bad at all, esp. as a conversion basis.

After cleaning the fit of the major parts (torso and legs were a single piece, and both arms, together with an area of the flanks, cut out along natural seams of the plugsuit) turned out to be very good, so that the arms could be worked on and especially painted separately, to be assembled later without PSR!

 

For display I built a neutral 4x4” base from a piece of laminated chipboard, pimped with edge band. A 2.5mm iron wire was mounted as a figure holder, and the same material was also used to strengthen the connections of the figure’s major components. Once completed the base was painted with semi-matt acrylic black paint from a rattle can.

 

The figure was built mostly OOB, I just made some minor tweaks. One fundamental thing I changed was the head position. The original figure looks over the left shoulder, but I wanted to present her later in a frontal view, so that the eyes should rather look forward. That was not so easy to realize, because the neck had to be modified, with a wedge-shaped plug under the chin to lift the face into a proper new position. This was sculpted with 2C putty around the head’s iron wire connector and some fine acrylic putty for a smooth finish.

 

From that point on head and body developed separately. The boxy things under the breast were removed, and instead I sculpted a W-shaped ledge, again with 2C putty, to come closer to the A.I-generated, somewhat “cleaner” version of the plugsuit.

 

The head was taken OOB, but the eyes required some attention, because they were sculpted in a rather protruding fashion, and overall it did not have much resemblance to the original character. However, I did not dare to take the risk of physically modifying the eyes and the IMHO too pronounced lips – a decision that later turned out to be better than expected (if you do not cling too much to the real Rei Ayanami character and her traits).

 

Head, body and arms were worked on and painted separately – the arms made it insofar easy as they were molded with the body’s armpit sections, using natural edges of the plugsuit to hide the kit’s seams.

 

Painting started with an overall coat of grey acrylic primer on everything, followed by a foundation with RAL 9002 (Grauweiß) on arms and body, plus some Tamiya TS-26 (Pure White) post-shading “from above” to support light effects. This was not really necessary, though, because the figure is at 1:6 scale (1’ tall!) large enough to produce realistic light and shade effects on its own.

 

In the meantime the face was spray-painted with a foundation in Tamiya TS-77 (Flat Flesh) and some shading with Vallejo “Pale Flesh” from a rattle can. The lip’s line was laid out with thinned Humbrol 70 (Brick Red), and at first I painted the lips themselves in a rather dark and reddish skin tone – but that looked too exaggerated and obtrusive, esp. for Rei’s introvert and reclusive character. This was later changed to a much lighter skin tone, similar to the rest of the face.

The eyes were experimentally created with the help of decals; I had ordered a set of generic anime eye decals of various sizes and colors before the build, and luckily there was a pair of suitably red female eyes in the set that I tried. To make them fit properly onto the face I separated the yes from their brows, though, and the rather tall eyes had to be trimmed to fit on/into the sculpted eyes sockets in the resin face. Weird task, but it wok4ed better than expected, also because of a rather sturdy but flexible clear carrier film, reminiscent of vintage Matchbox kit decals.

However, this was not the end concerning the eyes: I added some eyelashes and eyelids with black paint, some lighter red sections to the pupils and small white light reflexes. In the end the combined method of decals plus painting worked well, with a presentable result.

 

After the face had been finished it was sealed with matt acrylic varnish and the “hair helmet” had to be mounted and PSRed around it – another delicate task, followed by paint work on the pale blue hair for which I used Humbrol 47 as basis, mixed with Cobalt Blue for some deeper areas and hair strands and with some white for highlight, tips and an artificial light reflex halo around the upper head, frequently seen on the animated character.

 

In the meantime body and arms received contrast areas in deep red (Revell 34), Garter Blue (Humbrol 221) and Oxford Blue (Humbrol 104). This stunt required a lot of masking, and the demarcation lines between the red and the white sections on torso and legs were later added with generic 2mm black decal stripes. After a light black ink washing to emphasize edges and recesses the suit’s wrinkles were post-shaded with lighter shades of their foundations – only as a subtle effect to add a bit more materiality to the figure. The “00” on the breast was created with 45° USAF letters from an aftermarket decal sheet, while the large “0” on the backpack was laid out manually with black acrylic paint.

A lot of detail paint and corrections followed, everything was sealed with a coat of matt acrylic varnish, and the figure was finally assembled.

  

A tough project, and at first I was a bit disappointed by the kit’s face which does not resemble the anime Rei Ayanami at all. However, once completed, the face and the figure’s expression matches the A.I.-generated, rather realistic picture of the character more than expected, as if the figure would rather be a physical model of that picture than of the “real” anime Ayanami. Odd, but a pleasant and conciliatory outcome of a quite challenging conversion project. And the colorful plugsuit variant looks pretty good, too.

Leadenhall Market, City of London

Browse the set to find the best one !

Posting at umafreak with lynx browser

Browse through our Custom Pools gallery to see just a few of the projects we’ve designed and built throughout the years to get a better understanding of what we offer. For inquiries call 979-690-3343.

This pretty doe was nibbling on twigs and dead leaves on this cold January day. She eyed me carefully, but filling her tummy was her main concern.

When I'm browsing flickr, I love the photos I find. What I love more is the photos I see of the photographers. It's important to show the person behind the camera creating the wonderful shots. So, a photo of myself taken by my sister. Up against a brick wall. Such an unoriginal photo. But that has nothing to do with myself. I get so used to being behind the camera I get camera shy when people take my picture. I need to work on that. I just don't know. but well, yeah I'll do that.

Brooklyn Neighborhood, Portland, Oregon - October 2016

Ilford HP5+ @ 800 in D76 1:1 for 13 minutes.

To Share a Photo on Social Media:

1. Click on the set you would like to browse

2. Click on a specific photo

3. Click on the arrow pointing right on the ride lower side of the screen

4. Click on the Facebook icon in the popup window

4. Follow instructions in pop-up window

 

To Download a Photo:

1. Click on the set you would like to see (Awards, Pre/Post Race, Finish, etc.)

2. Click on a specific photo from the set

3. Click the arrow pointing down towards the bar which is on the right side of the screen.

4. Click the photo sizes you would like and then click download.

close-up of a gravel road

Larger version here Hit the F11 key to toggle your browser window full screen.

1 2 ••• 29 30 32 34 35 ••• 79 80