View allAll Photos Tagged assemblethefleet2020
This is my entry for the Assemble the Fleet 2020 contest. I've always been a fan of the paint job on the "graffiti TIE fighter" from Star Wars Rebels, and set out to design a larger ship the evoked the same style for Sabine to command. I settled on a modified design of the Defender-class Corvette from Star Wars: The Old Republic. The design was modified with the addition of two engines in addition to a Sabine signature graffiti paint job.
The escort fighters are not based on any particular canon design, but I chose to go with some type of TIE-style variant with a modified wing on one side and an engine cluster on the other. As for the color design, my thought is that "Commander Sabine" would likely encourage the pilots under her command to modify their fighters to reflect their personality. It is also nice to have a fabricated reason why the colored fighters are on one side of the ship and the monochrome ones on the other. =)
Comments / Criticism / Feedback is welcomed and encouraged.
Cheers!
This is my entry for the Assemble the Fleet 2020 contest. I've always been a fan of the paint job on the "graffiti TIE fighter" from Star Wars Rebels, and set out to design a larger ship the evoked the same style for Sabine to command. I settled on a modified design of the Defender-class Corvette from Star Wars: The Old Republic. The design was modified with the addition of two engines in addition to a Sabine signature graffiti paint job.
The escort fighters are not based on any particular canon design, but I chose to go with some type of TIE-style variant with a modified wing on one side and an engine cluster on the other. As for the color design, my thought is that "Commander Sabine" would likely encourage the pilots under her command to modify their fighters to reflect their personality. It is also nice to have a fabricated reason why the colored fighters are on one side of the ship and the monochrome ones on the other. =)
Comments / Criticism / Feedback is welcomed and encouraged.
Cheers!
Here is my rebel frigate for the #AssembleTheFleet2020 Contest by @rebellug. This model took me quite a while because of all those many and some hard angels. But I am happy with the result. Hope you like it aswell!!
For the Contest AssembleTheFleet2020
Simon Liu somehow you caught me.
Star wars is not a topic that I have a lot of knowledge about.
But who cares, they're spaceships.
I chose the good old republic with the classic Venator, and a few Jedi fighters with V-Wing fighter support.
The Venator is 30.5 studs long, the fighter ... well as small as it was possible for me.
I hope you all like my contribution.
This is my entry for the Assemble the Fleet 2020 contest. I've always been a fan of the paint job on the "graffiti TIE fighter" from Star Wars Rebels, and set out to design a larger ship the evoked the same style for Sabine to command. I settled on a modified design of the Defender-class Corvette from Star Wars: The Old Republic. The design was modified with the addition of two engines in addition to a Sabine signature graffiti paint job.
The escort fighters are not based on any particular canon design, but I chose to go with some type of TIE-style variant with a modified wing on one side and an engine cluster on the other. As for the color design, my thought is that "Commander Sabine" would likely encourage the pilots under her command to modify their fighters to reflect their personality. It is also nice to have a fabricated reason why the colored fighters are on one side of the ship and the monochrome ones on the other. =)
Comments / Criticism / Feedback is welcomed and encouraged.
Cheers!
Here is my Assault Frigate Mark II for the #assemblethefleet2020 with some different pictures. Did a few small Changes to the frigate, like the command bridge(?) and the back wings. The rest is mainly the same as in the first Post of this MOC. Hope u like it
RebelLUG: Assemble the Fleet Contest
Phase 1: Contest
1) Build a micro scale Capital or Frigate ship and
2) Build a micro fighter or bomber squad
Ships can be of your own design or from Star Wars, but should fit in the Star Wars universe
Build must be new, built after Feb 2, 2020
The Capital or Frigate ship must be 32 studs or less
Squads can be a lonely fighter or up to squad of 5, and to scale of your Capital or Frigate ship.
The Rules
Submit one (1) photo of your Capital or Frigate ship to the contest Flickr Group
Submit one (1) photo of your Fighter or Bomber squad to the contest Flickr Group
If you do not have a Flickr account, you can just use the hashtag
#AssembleTheFleet2020 and I'll post a link to your entry for you.
No digital entries, only LEGO elements can be used, however third party prints and pieces (CAC, EclipseGrafix etc) are allowed
You may create as many entries as you like ,but you must have defined pair of Capital or Frigate ship and fighter or bomber squad. You may only only place once in contest.
Submit your build before Feb 29, 2020. This is the contest's deadline!
Phase 2: Convention Collaboration (Optional, different sent of prizes)
Join the RebelLUG Resistance fleet!
For bonus swag, display your builds with the rest of the fleet, and face off against the Final Order Star Destroyers
Rendezvous coordinates:
Brickworld Chicago - June 17 – 21, 2020
Bricks in The Six Toronto - July 23– 26, 2020
Brickfair Virginia - July 29 - Aug 2, 2020
Prizes
First Place
75244 Tantive IVâ„¢
Second Place
75273 Poe Dameron's X-wing Fighterâ„¢
75249 Resistance Y-Wing Starfighterâ„¢
Third Place
75273 Poe Dameron's X-wing Fighterâ„¢
75248 Resistance A-Wing Starfighterâ„¢
Sponsors
Thank you to all our sponsors that keep our community going! Prizes, Bricks, and Swag provided by:
Length 320m or 30 studs
Correlian Engineering Corporation designed and built with cutting edge tech. The CEC truly put their all into this ship. Its equipped with a set of heavy, extended range turbolasers along with standard turbolaser turrets, four heavy assault starfighters and one YT-2020 assault carrier. A popular choice for buyers whether they're protecting a remote planet or guarding a convoy of spice from pirates.
This ship flew into the battle of Exegol crewed by a skilled group of mercenaries called the "Giant Killers".
Correlian shipyards tend to make most of their sales in the private sector so why not make a warship stealing some design cues from their freighter line of YT ships. I had lots of fun building this: so much so that more microscale might be in the future.
Loaded up and headed to defend the shipyards at Fondor
-------
Built for the #AssembleTheFleet2020 contest. The ship measures 31 4/5 studs long.
Here is my Assault Frigate Mark II for the #assemblethefleet2020 with some different pictures. Did a few small Changes to the frigate, like the command bridge(?) and the back wings. The rest is mainly the same as in the first Post of this MOC. Hope u like it
I love the idea of a Corellian frigate with a custom built YT class assault carrier. :D
Armament could be modular: either proton bombs or torpedoes. There are the two front cannons along with a turret up top and bottom (just like a certain YT-1300)
The size would be about twice that of the Millennium Falcon.
This is my entry for the Assemble the Fleet 2020 contest. I've always been a fan of the paint job on the "graffiti TIE fighter" from Star Wars Rebels, and set out to design a larger ship the evoked the same style for Sabine to command. I settled on a modified design of the Defender-class Corvette from Star Wars: The Old Republic. The design was modified with the addition of two engines in addition to a Sabine signature graffiti paint job.
The escort fighters are not based on any particular canon design, but I chose to go with some type of TIE-style variant with a modified wing on one side and an engine cluster on the other. As for the color design, my thought is that "Commander Sabine" would likely encourage the pilots under her command to modify their fighters to reflect their personality. It is also nice to have a fabricated reason why the colored fighters are on one side of the ship and the monochrome ones on the other. =)
Comments / Criticism / Feedback is welcomed and encouraged.
Cheers!
Nova-Class battle cruiser with an escort of Miy'til starfighters
-----
Built for the #AssembleTheFleet2020 contest.
For the Contest AssembleTheFleet2020
Simon Liu somehow you caught me.
Star wars is not a topic that I have a lot of knowledge about.
But who cares, they're spaceships.
I chose the good old republic with the classic Venator, and a few Jedi fighters with V-Wing fighter support.
The Venator is 30.5 studs long, the fighter ... well as small as it was possible for me.
I hope you all like my contribution.
Here is my Assault Frigate Mark II for the #assemblethefleet2020 with some different pictures. Did a few small Changes to the frigate, like the command bridge(?) and the back wings. The rest is mainly the same as in the first Post of this MOC. Hope u like it
Hapan starfighter
---------
Built for the #AssembleTheFleet2020 contest.
This was quite the challenge to make something so small have any detail whatsoever. Even then they are way too big out of scale with the Nova-class
This is an E-WIng Starfighter, obviously in microscale, and for the #AssembleTheFleet2020 Contest. Kinda rushed this one but hope you guys still like it!
For the Contest AssembleTheFleet2020
Simon Liu somehow you caught me.
Star wars is not a topic that I have a lot of knowledge about.
But who cares, they're spaceships.
I chose the good old republic with the classic Venator, and a few Jedi fighters with V-Wing fighter support.
The Venator is 30.5 studs long, the fighter ... well as small as it was possible for me.
I hope you all like my contribution.
This is my entry for the Assemble the Fleet 2020 contest. I've always been a fan of the paint job on the "graffiti TIE fighter" from Star Wars Rebels, and set out to design a larger ship the evoked the same style for Sabine to command. I settled on a modified design of the Defender-class Corvette from Star Wars: The Old Republic. The design was modified with the addition of two engines in addition to a Sabine signature graffiti paint job.
The escort fighters are not based on any particular canon design, but I chose to go with some type of TIE-style variant with a modified wing on one side and an engine cluster on the other. As for the color design, my thought is that "Commander Sabine" would likely encourage the pilots under her command to modify their fighters to reflect their personality. It is also nice to have a fabricated reason why the colored fighters are on one side of the ship and the monochrome ones on the other. =)
Comments / Criticism / Feedback is welcomed and encouraged.
Cheers!
Here is my Assault Frigate Mark II for the #assemblethefleet2020 with some different pictures. Did a few small Changes to the frigate, like the command bridge(?) and the back wings. The rest is mainly the same as in the first Post of this MOC. Hope u like it
YES, It is really holding together like this.
This is an E-WIng Starfighter, obviously in microscale, and for the #AssembleTheFleet2020 Contest. Kinda rushed this one but hope you guys still like it!
For the Contest AssembleTheFleet2020
Simon Liu somehow you caught me.
Star wars is not a topic that I have a lot of knowledge about.
But who cares, they're spaceships.
I chose the good old republic with the classic Venator, and a few Jedi fighters with V-Wing fighter support.
The Venator is 30.5 studs long, the fighter ... well as small as it was possible for me.
I hope you all like my contribution.
Length 320m or 30 studs
Correlian Engineering Corporation designed and built with cutting edge tech. The CEC truly put their all into this ship. Its equipped with a set of heavy, extended range turbolasers along with standard turbolaser turrets, four heavy assault starfighters and one YT-2020 assault carrier. A popular choice for buyers whether they're protecting a remote planet or guarding a convoy of spice from pirates.
This ship flew into the battle of Exegol crewed by a skilled group of mercenaries called the "Giant Killers".
Correlian shipyards tend to make most of their sales in the private sector so why not make a warship stealing some design cues from their freighter line of YT ships. I had lots of fun building this: so much so that more microscale might be in the future.
Length 320m or 30 studs
Correlian Engineering Corporation designed and built with cutting edge tech. The CEC truly put their all into this ship. Its equipped with a set of heavy, extended range turbolasers along with standard turbolaser turrets, four heavy assault starfighters and one YT-2020 assault carrier. A popular choice for buyers whether they're protecting a remote planet or guarding a convoy of spice from pirates.
This ship flew into the battle of Exegol crewed by a skilled group of mercenaries called the "Giant Killers".
Correlian shipyards tend to make most of their sales in the private sector so why not make a warship stealing some design cues from their freighter line of YT ships. I had lots of fun building this: so much so that more microscale might be in the future.
My NEW entry for the Assemble the Fleet contest.
This ship was assembled randomly from my sidewinder model. It was originally going to be the diplomatic cruiser from ep. 1, but ended up becoming a Nebulon about halfway through.
The Hutt fighter is much larger then proper scale would dictate it would be, but the I built the Nebulon first and the fighter second and I wanted it to be more then a minifig hand, so I'll chalk it up to perspective on why it looks so big.
Mayfi the Hutt is one of the few Hutts who isn't trying to become a crime lord. Instead of starting a less then legal empire, Mayfi used her inheritance to give aid to many backwater planets in the outer rim. Loaded with food and moisture vaporators in her heavily modified Nebulon-B frigate, she brought a little bit of happiness to each planet she and her crew visited.
Now the outer rim is dangerous territory, and the Crystal Shard is no slouch when it comes to defenses, armed with a powerful shield generator, 15 turbo-lasers, 20 point defense cannons, an ion turret, and a full squadron of Hutt-fighters.
more pics here: bricksafe.com/pages/TheRealBeef1213/star-wars/mafies-batt...
Frigate
More photo -> photos.app.goo.gl/vEU2gRfWmBQ43uCWA
This ship is exactly 32 studs long. If you doubt, go check it on the photo
#AssembleTheFleet2020
My NEW entry for the Assemble the Fleet contest.
This ship was assemble randomly from my sidewinder model. It was originally going to be the diplomatic cruiser from ep. 1, but ended up becoming a Nebulon about halfway through.
The Hutt fighter is much larger then proper scale would dictate it would be, but the I built the Nebulon first and the fighter second and I wanted it to be more then a minifig hand, so I'll chalk it up to perspective on why it looks so big.
Mayfi the Hutt is one of the few Hutts who isn't trying to become a crime lord. Instead of starting a less then legal empire, Mayfi used her inheritance to give aid to many backwater planets in the outer rim. Loaded with food and moisture vaporators in her heavily modified Nebulon-B frigate, she brought a little bit of happiness to each planet she and her crew visited.
Now the outer rim is dangerous territory, and the Crystal Shard is no slouch when it comes to defenses, armed with a powerful shield generator, 15 turbo-lasers, 20 point defense cannons, an ion turret, and a full squadron of Hutt-fighters.
more pics here: bricksafe.com/pages/TheRealBeef1213/star-wars/mafies-batt...