View allAll Photos Tagged Weatherproof
After some torrential rain, I was completely soaked through. Taking full advantage of the canon's weatherproofing I shot through the rain to capture this street artist feeling a bit miserable.
PS photo was taken with Camera screwed into Gorillapod (flexible weatherproof tripod) because I was walking outside alone
Corner of Shek Kip Mei St and Tai Po Rd
Bamboo tied to metal fixtures on apartment window, Section of clothes is covered with material to protect from rain or ensure they don't fall from the height.
Ropes tied from wall to wall of the apartment balcony, Clothes are hung up, under the cover of the ceiling, with coat hangers
www.ledstripbox.com/weatherproof-ip67-300-high-power-rgb-...
he LED Strip was made by Flexible Printed Circuit Board and SMD 5050 Top RGB LED. The LED is even, large and high brightness lighting effect. Also it is soft and easy bended for installation. The cutting unit is 50mm and 3 pieces LED per group, so you could cut a different length for your project and request. The LED strip could have different color (red, yellow, Pink……) and programs include single color holding, color charge at the same time and gradual change. The LED Strip is working on 12V DC and passed CE EMC testing.
Old School Painting can easily strip away the old, unwanted deck surface stain to make way for a new, fresh change.
Towels hung up on metal clothesline on resident's balcony, featuring candy strip roof covering. Large and permanently attached to balcony, above shopfront.
DIATHON is a advanced acrylic elastomer coating that combines high solids emulsion polymers, reinforcing laminar pigments, and potent biocides to provide superior durability, reflectivity, weatherproofing, and mildew resistance. Non-migrating fire retardant chemicals are permanently locked into the cured coating to assure long-term performance. DIATHON is unique among acrylic elastomers in that elongation and tensile strength properties are both maintained at lower temperatures.
A young sasanqua seedling in foreground with a view of the tiered white fountain drilled to create a container for ferns and small potted hosta. There is a jade plant beside the sasanqua seedling, and behind it are three different kinds of peace lilies. In the tub upper left is a 'Shoal Creek' agnus castus vitex. And, of course, beyond see the various shades of hosta.
A plastic bag served adequately as weatherproofing, but it made it somewhat difficult to manipulate the camera. I was still able to use some partial metering while selecting AF points using the joystick on the 40D.
Canon EOS 40D
Canon EF 70-200mm f/2.8L IS USM @ 148mm
f/2.8, 1/1250s, ISO 1000, handheld
Weatherproof is a brand that’s been there since 1948 and I love how their umbrellas are so durable but light-weight! #mommyjtips
Zmodo USA offers the latest PTZ Camera that will work with any DVR with an RS-485 Connection. These Home Surveillance cameras are great for places where 360 degree viewing angle is important. This CCTV camera is on sale now direct from the factory at www.zmodo.us
Richard Serra
Weatherproofed steel
With the construction of the Renée and Henry Segerstrom Concert Hall nearing completion, Elizabeth and Henry Segerstrom commissioned Richard Serra to create this sculpture as the highly visible focal point for the newly expanded Segerstrom Center for the Arts.
The weatherproofed steel Connector sculpture was installed in 2006. At 65 feet high, the 360-ton steel artwork is set on a pentagonal ground plan. Constructed of five torqued weatherproof steel plates that were fabricated in Siegen, Germany, the sculpture was assembled on site, rising from a twenty-foot position at its base to a four-foot opening at its top. The sculpture is sited on the main axis of the plaza, and visitors are encouraged to walk around it and through it. Inside, the aperture at the top opens to the sky.
Serra began a series of vertical, leaning plates in 1971 with a sculpture for the Stedelijk Museum in Amsterdam. Connector is an extension of this series. Aptly titled Connector, this challenging and innovative sculpture serves the symbolic function of unifying centerpiece for grounds of Segerstrom Center for the Arts.
One of the most important American sculptors, Richard Serra was born in 1939 in San Francisco and studied English at the University of California at Berkeley. Supporting himself by working in steel mills, as well as the memories his father relayed of laboring as a pipefitter in the San Francisco shipyards, were important influences to his work.
After graduate studies in painting at Yale University, he was given an award to study in Italy, where he began making three-dimensional works in metal. In the early 1960s, Serra turned to unconventional, industrial materials accentuating their inherent physical properties. Over the years, Serra has expanded his spatial and temporal approach to sculpture, focusing primarily on large-scale works, which emphasize materiality and an engagement between the viewers, the site, and the sculpture. As an artist whose work grew directly from out of the “process” art that arose in the 1960s, he still considers every step associated with making his sculptures—from the models to the molten steel, to the long, complicated heavy-lifting finale—to be a part of his art.
Serra’s public works have enraged and confounded viewers as they engaged with particular architectural, urban, or landscape settings. His work can be seen in most cities and museums around the work.
Spring (2013) - www.goingslowly.com
---
Featured in the following journals:
Off Grid Cable Internet Access w/ Power Over Ethernet (May 8th, 2013)
The balcony railing of the apartment has sections that protrude out with ring fixtures to attach clotheslines to. This resident has just used rope and tied it across the length of his apartment to hang his clothes up with coat hangers.
www.ledstripbox.com/weatherproof-ip67-300-high-power-rgb-...
he LED Strip was made by Flexible Printed Circuit Board and SMD 5050 Top RGB LED. The LED is even, large and high brightness lighting effect. Also it is soft and easy bended for installation. The cutting unit is 50mm and 3 pieces LED per group, so you could cut a different length for your project and request. The LED strip could have different color (red, yellow, Pink……) and programs include single color holding, color charge at the same time and gradual change. The LED Strip is working on 12V DC and passed CE EMC testing.
Virginia ice storm
What to do after an ice storm? Run out and start snapping. (Wish my macro lens were weatherproof!)
Type N Series RF Coaxial Connectors
RF coaxial connectors manufacturers,BNC connector,Cable Assembly,adapter,N connector
The type N connector was developed in the 1940's to satisfy the need for a durable, weatherproof, medium-size RF connector with consistent performance through 11 GHz.
The N series connector has been a staple in RF and Microwave applicationsall over the world. It is suited for a wide range of applications from military and aerospace to wireless LAN's.
Characteristics
Electrical
Impedance
50 Ω
Frequency Range
DC to 6 GHz
VSWR ( straight styles)
Straight connector, .141": ≤ 1.29(DC~11Hz)
Straight connector, RG316: ≤ 1.21(DC~6GHz)
Right angle connector, .141": ≤ 1.38(DC~11Hz)
Right angle connector，RG316: ≤ 1.30(DC~6GHz)
Mechanical
Coupling Nut Torque- Recommended- Proof torque
0.68 Nm～1.13 Nm / 6.0～10.0 in. lbs1.70 Nm /15.0 in. lbs
Contact Captivation
≥ 28 N/6.3 lbs
Cable Retention Force- cable 5/50-cable 10.5/50-cable 11/50-cable .141
150 N/33.75 lbs (single braid)200 N/48 lbs (double braid)300 N/67.5 lbs400 N/90 lbs270 N/60.75 lbs
Durability
500 min.
Environmental
Temperature Range
-55°C to +155°C
Moisture Resistance
MIL-STD-202 F, Method 106 F
Vibration
IEC-1169-1 Paragraph9.3.3(10-500 Hz;5g)
Thermal Shock
MIL-STD-202, Method 213, Condition I
Artist: Jackie Watson
Title: Fish on iron stake
Materials: stoneware deramic weatherproof
Art Trail
Blickling Hall
Blicking, Norfolk, England, UK
BRAC 133
ALEXANDRIA, Va. -- A contractor installs weatherproofing material on the face of the east tower while working at the Department of Defense Office Complex (BRAC 133) project site at Mark Center, Aug. 30, 2010. Construction of the complex began in January 2009 and is scheduled for completion in September 2011. The U.S. Army Corps of Engineers New York District is managing design and construction of the $1.08 billion complex as part of 2005 Base Realignment and Closure (BRAC) programs which are ongoing at and around Fort Belvoir, Va. (U.S. Army Corps of Engineers photo by Marc Barnes)
Testing the weatherproofing on the observation deck, or installing a swimming pool -- probably the former. 4-19-11