View allAll Photos Tagged Variable
Coenagrion pulchellum
A pair ovipositing in tandem. Nice to see but I was hoping to find the Irish Damsel here too :(
Some background:
]The VF-4 Lightning III began development in 2005 under the initial designation of the VF-X-4. Developed as a successor craft to the VF-1 Valkyrie, the VF-4 Lightning III was designed as a variable fighter that emphasized mobility in outer space.
The VF-4's development began with the prototype VF-X-4 and the VF-X-3. However, when Earth was devastated in Space War I the loss of military facilities also resulted in loss of the VF-X-3. Amongst the airframes under development exist prototype No. 1 craft, VF-X-4V1 and the trial manufactured VF-4A-0 and thus the surviving VF-X-4 was developed and completed as the VF-4 Lightning III. A trial-produced variable fighter, designated the VF-4A-0, was also built using 25% VF-1 Valkyrie parts.
VF-X-4 underwent flight tests, including being test piloted by Space War I veteran Hikaru Ichijo. Once successful operational models were ready, the VF-4 began mass production on February 2012. Initial deployment began on the SDF-2 Megaroad-01 in VF-1 Skull and SVF-184 Iron Chiefs Squadrons on September 2012. When the SDF-2 Megaroad launched in the same month, Hikaru Ichijō flew a VF-4 alongside the new colonization vessel as the ship lifted from Earth and began exploration outside of the Sol system.
As a result of integrating existing Overtechnology and Zentradi-series technology, the VF-4 had a characteristic three-hulled-type airframe structure remarkably different from the conservative VF-1 Valkyrie design. The three-hulled style of the VF-4 increased fuselage volume, propellant capacity and armament load capability that all resulted in a 40% improved combat ability over the VF-1. Fully transformable, the VF-4 could shift into Battroid and Gerwalk modes like previous variable fighters.
However, the VF-4 did suffer minor mobility problems within an atmosphere and the new type was primarily deployed to the Space Air Corps of emigrant fleets to serve as the main fighter craft of the UN Forces in the 2020s. It was because flight performance within the atmosphere was not as good as the VF-1 that the VF-5000 Star Mirage became the main combat craft within atmosphere, while the VF-4 operated mainly in outer space.
Built as a space fighter, the VF-4 primary weapons became two large beam cannons, though the craft was capable of carrying a GU-11 gun pod in Gerwalk and Battroid modes. In addition to the powerful primary beam guns, the Lightning III also featured twelve semi-recessed long-range missiles, as well as underwing pylons for additional missiles and other stores.
The VF-4 was only slightly heavier than the VF-1, but featured considerably more powerful engines, making the craft ideal for operations deeper out in space. The Lightning III was also much faster in the atmosphere than the older VF-1, although the VF-4’s flight mobility performance was not as great.
The VF-4 was also notable as the first production variable fighter to utilize a HOTAS system (Hands On Throttle And Stick) for the cockpit HMI (Human-Machine Interface). Furthermore, the VF-4's cockpit was laid out as a single hexagonal MFD (Multi-Function Display) that proved so successful that it was retrofitted into "Block 6" VF-1 fighters, as well as providing the template for all future variable fighter cockpits.
By the end of 2015, mass production of the VF-1 series at last had come to an end. From 2020 onward, the VF-4 Lightning III officially replaced the VF-1 to become the main variable fighter of U.N. Forces. Production of the VF-4 continued for a decade and ceased in 2022, with a total of 8,245 Lightning III variable fighters produced.
The VF-4 variable fighter remained in active service into the late 2040's but was complemented or substituted in many branches of the UN Forces by the cheaper and more atmospherically maneuverable VF-5000 Star Mirage. The VF-4 Lightning III was eventually replaced as the main variable fighter of U.N. Spacy in the later half of the 2030s by the VF-11 Thunderbolt.
General characteristics:
Manufacturer: Stonewell/Bellcom
Equipment Type: Variable fighter
Government: U.N. Spacy, U.N. Space Marines
Introduction: 2012
Operational Deployment: September 2012
Dimensions:
Accommodation: pilot only
Fighter Mode: wingspan 12.65 meters; height 5.31 meters; length 16.8 meters
Mass: empty 13.95 metric tons
Structure: space metal frame, SWAG energy conversion armor
Powerplant:
2x Shinnakasu/P&W/Roice FF-2011 thermonuclear turbine engines,
rated at 14,000 kg (137.34 kN) each
2x dorsal rocket engines (mounted on top of the main thermonuclear turbine engines)
2x ramjet engines (embedded into the inner wing sections)
P&W HMM-1A high-maneuverability vernier thrusters
Performance:
Fighter Mode: Mach 3.02 at 10,000 m
Mach 5.15 at 30,000+ m
Thrust-to-weight ratio: (empty) 2.01 (rating for turbine engine thrust ONLY)
g limit: unknown
[Armament:
2 x large beam cannons in forward engine nacelles
12x semi-recessed long range missiles (mounted on engine nacelles and ventral fuselage)
8x underwing pylons for missiles, gun pods an/or drop tanks
The kit and its assembly:
Well, this build has been lingering for almost 25 years in the back of my mind. It just took so long that a suitable IP kit (with a reasonable price tag) would materialize!
The original inspiration struck me with a VF-4 profile in the source book "This is animation special: Macross PLUS" from 1994, which accidently fell into my hands in a local Japanese book store. Among others, a side and top view profile of an aggressor VF-4 in an all-brown, Soviet-style paint scheme was featured. At that time I found the idea and the scheme pretty cool, so much that I even built a modified 1:100 VF-1 as a ground attack aircraft in this paint scheme.
However, the original VF-4 profile from the source book had always been present, but for years there had been no affordable kit. There have been garage/resin kits, but prices would start at EUR 250,-, and these things were and are extraordinarily rare.
Things changed for the better when WAVE announced an 1:72 VF-4 kit in late 2016, and it eventually materialized in late 2017. I immediately pre-ordered one from Japan (in a smart move, this even saved money) and it eventually turned up here in Germany in early 2018. Patience pays out, it seems...
I had preferred a 1:100 kit, though, due to space issues and since almost any other Macross variable fighter model in my collection is in this small scale, but I am happy that a decent VF-4 kit at all appeared after so many years!
Concerning the WAVE kit, there’s light and shadow. First of all, you have to know that you get a VF-4A. This is mentioned nowhere on the box, but might be a vital information for hardcore modelers. The early VF-4A is a rather different aircraft than the later VF-4G, with so fundamental differences that it would warrant a completely new kit! On the other side, with a look at the kit’s parts, I could imagine that a VF-4B two-seater could be easily realized in the future, too.
The kit is a solid construction, a snap-fit kit molded in different colors so that it can be built without painting. This sounds toy-like, but - like many small scale Bandai Valkyrie kits - anything you ask for is actually there. When you use glue and put some effort into the kit and some donor parts, you can make a very good model from it.
The kit's box is pretty oversized, though (any sprue is shrink-wrapped, horrendous garbage pile and wasted space!), and the kit offers just a single decal (water-slide decals, not stickers) option for a Skull Squadron VF-4A – AFAIK it’s Hikaru Ichijoe’s machine that appears in one of the Macross Flash Back 2012 music videos, as it escorts the SDF-02 “Megaroad” colonial ship after launch from Earth towards the center of our Galaxy.
The parts are crisply molded, and I actually like the fact that the kit is not as uber-engineered as the Hasegawa Valkyries. You can actually call the WAVE kit simple - but in a positive sense, because the parts number is reduced to a minimum, material strength is solid and the kit's construction is straightforward. Fit is excellent – I just used some putty along the engine gondolas due to their complex shape, but almost anything else would either fit almost perfectly or just call for some sanding. Impressive!
Surface details etc. are rather basic, but very crisp and emphasized enough that anything remains visible after adding some paint. However, after all, this aircraft is just a fictional animation mecha, and from this perspective the kit is really O.K..
After building the kit I most say that it's nothing that leaves you in awe, and for a retail price of currently roundabout EUR 50-70,- (I was lucky to get it for an early bird deal at EUR 40,-, but still pricey for what I got) the kit is pretty expensive and has some weaknesses:
The model comes with a decent (= simple) cockpit and a very nice and large pilot figure, but with no ordnance except for the semi-recessed long-range missiles (see below). The cockpit lacks any side consoles, floor or side wall details. If you put the pilot into the cockpit as intended, this is not a big issue, since the figure blocks any sight into the cockpit’s lower regions. However, the side sticks are molded into the pilot’s hands, so that you have to scratch a lot if you want to present the cockpit open and with an empty seat.
The landing gear is simple, too, and the wells are very shallow (even though they feature interior details). As a special feature, you can switch with some extra parts between an extended or retracted landing gear, and there are extra parts that allow the air intakes and some vectoring nozzles to be closed/extended for orbital operations. However, detail fetishists might replace the OOB parts with the landing gear from an 1:72 F-18 for an overall better look.
Provisions for underwing hardpoints are actually molded into the lower fuselage part (and could be punched/drilled open - another indication that more VF-4 boxings with extra sprues might follow?), but the kit does not come with any pylons or other ordnance than the dozen fuselage-mounted AAMs. Furthermore, the semi-recessed missiles are just that: you only get the visible halves of the only provided ordnance, which are simply stuck into slits on the model’s surface. As a consequence, you have to mount them at any rate – building a VF-4 for a diorama in which the missiles are about to be loaded would require massive scratch-building efforts and modifications.
Another problem indirectly arises when you put some effort into the kit and want to clean and pre-paint the missiles before assembly: every missile is different and has its allocated place on the VF-4 hull. The missiles are numbered – but only on the sprue! Once you cut them out, you either have to keep them painstakingly in order, or you will spend a long evening figuring out where which missile belongs! This could be easily avoided if the part number would be engraved on the missiles’ back sides – and that’s what I actually did (with a water-proof pen, though) in order to avoid trouble.
The clear canopy is another issue. The two parts are crystal-clear, but, being a snap-fit kit, the canopy parts have to be clipped into the fuselage (rear part) and onto a separate canopy frame (front part). In order to fit, the clear parts have cramps molded into their bases – and due to the excellent transparency and a magnifier effect, you can see them easily from the outside – and on the inside, when you leave the cockpit open. It’s not a pretty solution, despite the perfect fit of the parts.
One option I can think of is to carefully sand the cramps and the attachment points away, but I deem this a hazardous stunt. I eventually hid the cramps behind a thin line of paint, which simulates a yellow-ish canopy seal. The extra windscreen framing is not accurate, but the simplest solution that hides this weak point.
The kit itself was built OOB, because it goes together so well. I also refrained from adding pylons and ordnance – even though you can easily hang anything from Hasegawa’s VF-1 weapon set under the VF-4’s wings and fuselage. A final, small addition was a scratched, ventral adapter for a 3.5 mm steel rod, as a display for the flight scene beauty pic.
Painting and markings:
As mentioned above, the livery is based on an official profile which I deem authentic and canonical. My aircraft depicts a different machine from VFT-127, though, since I could not (and did not really want to) 100% replicate the profile's machine from the Macross PLUS source book, "13 Red". Especially the squadron’s emblem on the fin would create massive problems.
For the two-tone wrap-around scheme I used Humbrol 72 (Khaki Drill) and 98 (Chocolate Brown), based on the printed colors in the source book where I found the scheme. The pattern is kept close to the benchmark profile, and, lacking an underside view, I just mirrored the upper scheme. The starboard side pattern was guesstimated.
As a second-line aggressor aircraft, I weathered the VF-4 with a black ink wash, some post-shading with various lighter tones (including Humbrol 160, 168, 170 and 187) and did some wet-sanding treatment for an uneven and worn look.
Interior surfaces were painted according to visual references from various sources: the landing gear and the air intakes became white, while the cockpit was painted in RAF Dark Sea Grey.
In order to add some color to the overall brown aircraft I decided to paint the missiles all around the hull in white with tan tips – in the profile, the appear to be integrated into the camouflage, what I found dubious.
Most stencils come from the OOB sheet, but I added some more from the scrap box. The grey "kite" roundels come from an 1:72 Hasegawa Macross F-14 Tomcat kit sheet, which I acquired separately for a reasonable price. Even though it took four weeks to be delivered from Asia, the investment was worthwhile, since the sheet also provided some useful low-viz stencils.
The VAT-127 “Zentraedi Busters” unique tail insignia was more complicated, because these had to be printed at home. As a side note, concerning the fin marking, I recently found a translation of the benchmark profile's text on mahq.net, which is interesting: "The Regult within the targeting reticle on the tail met with disapproval from micronized Zentraedi pilots, and so was only used for a short time." The comment also reveals that the original aircraft's modex is "713", not just "13" as depicted, so I tried to reflect these details on my build, too.
I eventually settled for a solution that was partly inspired by the kit’s OOB fin marking and the wish for more contrast for the motif: I scanned the original Regult pod illustration from the source book and printed it on white decal sheet. This was sealed with two layers of glossy acrylic varnish (applied with a rattle can) and then cut into a white field that fills the fixed part of the fin (using the WAVE kit’s OOB fin markings as reference). Once in place and dry, two black outlines were added separately (generic decal material) which help blend the decal and the surroundings. Finally, thin strips of silver decal sheet were used for the fins’ leading edges.
This design variation, compared with the original “13 Red” illustration, led to the idea of a flight leader’s machine with slightly more prominent markings. In order to take this concept further I also gave the aircraft a white stripe around the front fuselage, placed under the kite roundel and again with black outlines for a consistent look. It’s not much different from “13 Red”, but I think that it looks conclusive and, together with the white fin markings and the missiles, livens up the VF-4’s look.
The appropriate flight leader tactical code “01 Red” was puzzled together from single digits from a Begemot Su-27 sheet, the rest of the bort numbers were taken from the OOB sheet (which incidentally feature a “01” code, too).
Concerning the OOB decal sheet, there’s much light but also some deep shadow. While the register is excellent and the carrier film flexible enough to lay down smoothly, the instructions lack information where to place the zillion of stencils (“No step” and “Beware of Blast” stuff) are to be placed! You only get references for the major markings – the rest has either to be guessed, OR you are in possession of the VF-4 source book from Softbank Publishing which was (incidentally?) released in parallel with the WAVE kit. This mecha porn offers an overview of all(!) relevant stencils on the VF-4A’s hull, and ONLY with this information the exhaustive decal sheet makes some sense…
As final steps, the VF-4 received some dry-brushing with light grey around the leading edges, some chipped paint was simulated with dry-brushed aluminum and, finally, light soot stains around the vectoring nozzles all around the hull and the weapon bays were created with graphite. Then the kit was sealed with matt acrylic varnish (Italeri).
Well, in the end, it’s not a carbon copy of the inspiring illustration, but rather another machine from the same squadron, with more creative freedom. I stayed as true to the benchmark as possible, though, and I like the result. Finally, after almost 25 years, I can tick this project off of my long ideas and inspiration list.
Considering the kit itself, I am really torn. I am happy that there finally is a VF-4 IP kit at all after so many years, but to me it’s a contradictive offer. I am not certain about the target group, because for a toy-like snap-fit kit it’s too detailed and expensive, but for the serious modeler it has some major flaws.
The biggest issue is the kit’s horrendous price – even if it would be more detailed or contained some fine resin or PE parts (which I would not want, just a “good” plastic kit). Sure, you can put some effort into the kit and improve it, e .g. in the cockpit or with a donor landing gear, but weak points like the “flat” missiles and the lack of proper bays for them are IMHO poor. For the relatively huge price tag I’d hoped for a “better” OOB offer. However, the kit is easy to build and a good representation of the Lightning III, and I am curious if there are kit variants in WAVE’s pipeline?
Argia fumipennis (male, dark-winged form)
After a bad night at work this little guy showed up in my backyard and cheered me up.
This picture is one of several of mine (pat on back) that were published in a book called "Priceless Florida" coauthored by Ellie Whitney, D. Bruce Means and Anne Rudloe, all scientific and environmental types here in Tallahassee. I say that to say that (say that three times fast!) this damselfly was identified by one of them.
Personalize every Print Material
Variable data printing allows for printing customized promotional materials that could possibly double or even triple response rates.
Stanart Print Pvt Ltd
instantdigitalprint@gmail.com
+91 - 22 - 67102354
Advising motorists that the intersection upgrade of Golden Grove Rd/Grenfell Rd East will commence in the next few weeks.
Billy Hare
Del 13 de agosto al 10 de setiembre.
Lunes a viernes de 11:00 am a 8:00 pm y sábado de 11:00 am a 7:00 pm.
Galería Lucía de la Puente (Paseo Saenz Peña 206 A - Barranco).
Ingreso libre.
Variable Checkerspot (Euphydryas chalcedona). As the name makes clear, this species varies widely in coloration and pattern. This specimen is as dark as I've ever seen. Stevens Creek County Park. Near Cupertino, Santa Clara Co., Calif.
J'ai acheté 3 bouquins supplémentaires dont le guide des rapaces diurnes de Benny Génsbol, mais je ne peux jurer que c'est une buse (féroce) pattue. Il y avait 3 individus qui avaient le comportement particulier de ne se poser que sur la ligne à haute tension. Elles étaient aussi très farouche. Distance de garde: plus de 150m. Deux heures d'observation, avec un livre en main, par 2 personnes pour identifier.
Elles sont restées quatre jours.
Il existe trois variétés de buse féroce dont le juvénile ressemble soit à la buse battue, soit à la buse variable.
éléments favorable à une buse féroce présents sur diverses photos:
1. la taille plus grande qu'une buse variable.
2. large tache des rémiges primaires visible partiellement au dessus.
3. base de la main blanc pur dessous.
4. queue barrée.
5. plumes primaires et secondaires sans barres.
éléments défavorable à une buse féroce présents sur diverses photos
1. tout correspond sauf que l'adulte clair n'a pas de barre dans la queue.
éléments favorable à une buse variable présents sur diverses photos:
1. virgule noire à l'extrémité des poignets .
éléments très défavorable à une buse variable présents sur diverses photos:
1.extrémité de la queue blanche conjointe à la culotte blanche.
2. la buse variable n'a jamais la queue blancha avec une large bande terminale noire.
Coming down the Ae to Thornhill road, the changing weather created a contrast between the sun and the dark cloud.
The 29th Annual AXA Raheny 5 Mile Road Race 2013 took place in Raheny Village, Dublin, Ireland on Sunday January 27th 2013 at 15:00. There was also an earlier set of junior/childrens races at 14:00 and the walkers' race at 14:40. The 'Raheny 5' has become one of the most famous road races in Ireland. The race has continued to grow year-on-year and this year was no exception. Almost 3,000 participants took part in the various events of the day. The incredible voluntary organisational work carried out by Raheny Shamrocks and the local community in staging the race every year must be acknowledged.
The weather was postively wintery today. There was an icy wind blowing into the face of the runners at various points in the course. This made for some very variable mile-splits. Overall the weather was favourable in that the rain stayed away and there was some helpful 'wind at the back' for the runners in places.
This is a large set of photographs where images are captured from the ONE MILE Mark and at the finish straight with about 300 Meters remaining (up to an overall finish time of 55 minutes). The overall winners where Joe Sweeney and Mary Cullen.
How can I get a full resolution copy of these photographs?
All of the photographs here on this Flickr set have a visible watermark embedded in them. All of the photographs posted here on this Flickr set are available, free, at no cost, at full resolution WITHOUT watermark. We take these photographs as a hobby and as a contribution to the running community in Ireland. We do not know of any other photographers who operate such a policy. Our only "cost" is our request that if you are using these images: (1) on social media sites such as Facebook, Tumblr, Pinterest, Twitter,LinkedIn, Google+, Google Orkut etc or (2) other websites, web multimedia, commercial/promotional material that you provide a link back to our Flickr page to attribute us. This also means the use of these images for Facebook profile pictures. In these cases please make a wall post with a link to our Flickr page. If you do not know how this should be done for Facebook or other media please email us and we will be happy to help suggest how to link to us.
Please email petermooney78 AT gmail DOT com with the links to the photographs you would like to obtain a full resolution copy of. We also ask race organisers, media, etc to ask for permission before use of our images for flyers, posters, etc. We reserve the right to refuse a request.
I ran the race - but my photograph doesn't appear here in your Flickr set!
As mentioned above we take these photographs as a hobby and as a voluntary contribution to the running community in Ireland. Very often we have actually ran in the same race and then switched to photographer mode after we finished the race. Consequently, we have no obligations to capture a photograph of every participant in the race. However, we do try our very best to capture as many participants as possible. But this is sometimes not possible for a variety of reasons:
You were hidden behind another participant as you passed our camera
Weather or lighting conditions meant that we had some photographs with blurry content which we did not upload to our Flickr set
There were too many people - some races attract thousands of participants and as amateur photographs we cannot hope to capture photographs of everyone
We simply missed you - sorry about that - we did our best!
You can email us petermooney78 AT gmail DOT com to enquire if we have a photograph of you which didn't make the final Flickr selection for the race. But we cannot promise that there will be photograph there. As alternatives we advise you to contact the race organisers to enquire if there were (1) other photographs taking photographs at the race event or if (2) there were professional commercial sports photographers taking photographs which might have some photographs of you available for purchase. You might find some links for further information below.
If you want to contribute something for these images?
We do not charge for these images. We take these photographs as our contribution to the running community in Ireland. If you feel that they are good enough that you would ordinarily pay for their purchase we would suggest that you can provide a donation to any of the great charities in Ireland who do work for Cancer Care or Cancer Research in Ireland.
Don't like your photograph here?
That's OK! We understand!
If, for any reason, you are not happy or comfortable with your picture appearing here in this photoset on Flickr then please email us at petermooney78 AT gmail DOT com and we will remove it as soon as possible.
Please note: that we cannot be responsible for the content of any external links (outside of our Flickr account) as we have no control over them. Links are provided for your information only. Responsibility lies solely with the operators of these websites.
Some links, related to this race, which you might find useful:
The Raheny Shamrocks Club Internet Homepage: www.rahenyshamrock.ie/ or www.rahenyshamrock.ie/news/axa-raheny-5-2013
Raheny Shamrocks Facebook Page: www.facebook.com/rahenyshamrock?sk=wall&filter=2
Our Flickr Set from the Raheny 5 Mile Road Race 2012: www.flickr.com/photos/peterm7/sets/72157629086163673/
Our Flickr Set from the Raheny 5 Mile Road Race 2011:http://www.flickr.com/photos/peterm7/sets/72157625939674838/
Our Flickr Set from the Raheny 5 Mile Road Race 2010: www.flickr.com/photos/peterm7/sets/72157623196555201/
The Boards.ie Athletics Discussion Thread for the Race: www.boards.ie/vbulletin/showthread.php?t=2056776031
You will find photographs from many other photographs for the race at: www.racepix.com/Raheny-AC-5-Mile/pictures/832/
PT&P recently manufactured 1,520 PTP-2 and PTP-4 spring hanger assemblies designed specifically for a furnace application. These custom variable springs have welded components as opposed to bolted components found in standard assemblies. Due to the space limitation within the furnace, the spring coils were set in a welded housing which allows for the springs to be closely oriented within a smaller spatial envelope. The assemblies are made from carbon steel, consisting of variable spring, rod, and riser clamp components. Instead of galvanizing, the assemblies were coated with a red-oxide primer due to the high temperature operating conditions of the furnace. This prevents the possibility of molten zinc (from the galvanizing process) contaminating the furnace tubes.
The springs are designed for loads of 143 to 660 lbs. and for total travel ranging from 3/4 to 2". Each assembly was pre-assembled to ensure free movement throughout the spring’s travel range before welding the bottom closure plate. Prior to shipment, all assemblies were calibrated to determine the exact spring rate and then were set to the customer’s designated cold load position. These springs are then located and installed into the furnace based on the spring rate.