View allAll Photos Tagged Systems
A Cargo System for (Classic) Space Minifig scale models based on standard cargo units (similar to ISO Containers).
I’ve already used the SCU for some models in the last few months:
- A cargo Unit for my LL 926 Space Crane
- My Transportable Base
- An SCU transport box/cage as a garage for my Transportable Rover
A simple transport cage can carry 6-wide vehicles as a roll-on-roll-off carrier and up to 8-wide scooters or other vehicles and equipment. Transport boxes and other Space Cargo Units are easy to build in endless variations – Expect to see more, soon ;-))
Aberkenfig, South Wales
Lat +51·542 Long -3·593
Skywatcher 254mm Newtonian, Tal 2x Barlow Lens, ZWO ASI 120MC
Captured using Firecapture
FPS (avg.)=42
Shutter=0.545ms
Gain=33 (33%)
Gamma=34
Processed with Registax 6 & G.I.M.P.
Seeing Conditions: Average with drifting cloud.
Out of 6750 frames captured, about 1850 used for processing. Final image enlarged to 150%.
ZK303 Eurofighter Typhoon T.3 of BAE Systems preparing to depart in the rain on a test flight at Warton 8/2/22
Our long awaited System Tumours DVD is now ready for pre-order at a discounted price of £9.99 + shipping. Limited time only.. (Usual price £15 + shipping).
System Tumours is a Graffiti film based around the SMT crew.. contains endless trains, back to back daytime whole cars, racking, interviews, TV appearances and much more..
TRAILER - vimeo.com/76679470
ORDER HERE - www.esemtee.bigcartel.com/
Anne Rice's novels have, thus far, been turned into two films, "Interview with the Vampire" and "Queen of the Damned". As novels, I love both of these books, but I found their adaptations somewhat lacking.
What was not lacking, however, was Stuart Townsend's sex appeal in the latter. In honour of that, Kitti is listening to www.youtube.com/watch?v=De4MX7lLaio&list=PLC5173DC41D... and www.youtube.com/watch?v=cu2pljo2VZM&list=PLC5173DC41D....
I've never been a fan of Linkin Park/Chester Bennington or Earshot, but they are two of the more memorable songs from QotD.
Andrew Barclay 0-4-0 saddle tank 'No.19' (works No.1614 built in 1918) was captured in the rain on the moors near Minnivey Colliery on 27th August 1971 as it was returning to Dunaskin with empty tippler wagons. The wooden-bodied wagon was a semi-permanent fixture to the locomotive and acted as an auxiliary coal tender. Supplied new to the Dalmellington Ironworks, it was transferred to the National Coal Board Area No.5 on vesting day on 1st January 1947 and, apart from works visits was maintained and worked at Dunaskin Loco Shed serving the Waterside System throughout its commercial service. Purchased by the Ayrshire Railway Preservation Group in 1980, it remains at Dunaskin to this day.
© Gordon Edgar - All rights reserved. Please do not use my images without my explicit permission
The Silurian system, founded on geological researches in the counties of Salop, Hereford, Radnor, Montgomery, Caermarthen, Brecon, Pembroke, Monmouth, Gloucester, Worcester, and Stafford
London :John Murray, Albemarle Street,1839.
The Jovian System!
The Planet Jupiter & Galilean Moons last night.
Seeing was boiling...so I went down to lower power to get Jupiter & the Nicely placed Galilean Moons. I ran the Chip ROI at 1280 x 400 @30fps to fit them all in.
Jupiter with Ganymede, Io, Callisto, & Europa. Turned out okay..C8 at Prime focus with the QHY5IIL CCD camera, (1800 frames) 600 frames each RGB, Stacked in Registax, then RGB combined in Maxim DL.
Best Regards,
John Chumack
JoeyStarr has been a hip-hop musician for more than 20 years, once specially known for being one of the two members of the controversial, but talented, band "NTM". Time won or made him wiser.
He's mainly acting in family-friendly comedy movies now.
CSXT 1972 has arrived in Chicagoland as the leader of M512 from Nashville to the BRC. Here, the locomotive proudly displays its "Family Lines System" livery - the number 1972 representing the year of the system's formation - as it gets signals through Steger, IL to approach the diamond crossing with CN at Chicago Heights.
Hey everyone!
So, I'm actually posting something quite new for the first time in a very long while and I actually feel good about it. It was my friend's (the one in the photo) mom's birthday yesterday and she invited me and a couple of other close people out for dinner to celebrate and it was actually quite fun. Drank so much champagne and ate too much and just had adult conversations with the other people there. I took this just before we left for the party and it was totally spontaneous. There's something about this that takes me back to my older photos and I really love my older photos so yeah, I might start focusing on taking photos like these.
Anyway, more exciting news. I'm going to be taking new photos this coming week and I'm so excited. I've been meaning to take my camera out for a spin because I've been feeling a bit rusty lately (in terms of taking photos, editing, updating etc) so yeah, new stuff coming
Thanks for the support (comments, views, favorites, etc) and for everything so far! I know that I haven't been updating that much but that'll hopefully change soon.
2011.09.21
日比谷 アドアーズ 銀座addict店
麻雀格闘倶楽部で時間を潰しながら電車の運行再開を待つ…
iPhone 4,Hipstamatic,TiltShift Generator,Lo-Mob
“LUNAR TESTS -- Jack Mays, a test subject from the MSC Crew Systems Division, wears an International Latex Corporation spacesuit under a thermal overgarment during tests at the Lunar Topographical Simulation Area. He is also wearing a Portable Life Support System (PLSS) back pack. A full-scale mock-up of a Lunar Module is in background.”
…What he is not wearing however, is a helmet. In fact, he may be yelling something like “Where the f**k is my helmet?!?!?! You knew they were coming to take pictures today!!!” Or, being a consummate NASA professional, he may be realistically portraying his final moments in the near vacuum of the lunar surface, attempting to gasp…right before his eyes pop out of his head.
The top of a MSC water tower can be seen 'next' to the Lunar Module Descent Engine (LMDE) skirt/nozzle.
Jack Mays:
Credit: Manned Space/YouTube
The Pyramid/Tesla Energy Connection
Nikola Tesla regarded the Earth as one of the plates of a capacitor, the ionosphere forming the other plate. Recent measurements have shown that the voltage gradient between the two is 400,000 volts. With this principle, he said he was able, through his invention, to provide free energy to anyone, inexhaustible in quantity, anywhere on earth. That is why he had built a first prototype, the Wardenclyffe Tower, in which was to apply his famous pyramid effect. What is it exactly?
"The lines of force of the electric charge additioned to the fields from the sun act on the walls of a pyramid.The magnetic equipotentials show a high magnetic density in the summit. The voltage of the electric field increases of 100 V per meter. The terrestrial negative field reaches its maximum value at the summit of the pyramid; at the top of the pyramid of Giza, the voltage is 14,600 V. This pyramid is itself a capacitor, it accumulates an electrical charge. If an excess load is added, a discharge occurs at the top, and, as we know currently, that top was adorned with a solid gold capstone, an excellent conductor."Tesla wanted his tower to be high to increase the voltage at the top. He wanted to create an artificial lightning in the tower. In the discharge tube of a natural flash , the temperature rises to 30 000 ° C. Tesla did not want to manage such high temperatures because it is a waste of energy. Tesla's Wardenclyffe tower would have used a transformer to produce a high voltage, which would have generated, instead of a natural lightning, a "discharge of high energetic ion abundance".To accentuate the pyramid effect, he had imagined to give the tower the octagonal shape of a pyramid topped by a half sphere. Why octogonal? Tesla does not explain, but when we read his memoirs, we understand that he sensed a scientific discipline that did not yet exist, geobiology, and the theory of waves of forms. From the perspective of traditional physics, the fact that the tower is octagonal is insignificant. It could be square or have an infinite number of faces, that is conic. "In all cases the voltage would have been the same, its shape just gave it stability." This raises two objections. The octagonal shape is not a guarantee of stability comparing to the square shape. If he was really looking for stability, a hyperbolic rise, like that of the Eiffel Tower, would have been better suited. The octagonal shape has very special wave characteristics, it is possible that this pure genius sensed it without being able to theorize it.As for the square shape of the pyramids, the engineer Gustave Eiffel has chosen it for his tower, precisely because it is a guarantee of stability, as the four legs and the widening elevation. Built in 1889, our national tower was already fairly well known to be his model. As Wardenclyffe Tower, the Eiffel Tower has a pyramid effect which makes it pick at the top, even without a storm, a DC current. Its lightning rod "makes" thus some electricity that goes down in a cable to be delivered to the earth.This waste is not limited to the Eiffel Tower. All roofs and metal frames make the same production, stupidly given to the earth. The Vril energy is free, it is its biggest flaw in a world of profit. The fact that it is completely environmentally friendly and inexhaustible has no interest for the capital. The fact that it is beneficial for both the human mind and the health of people, animals and plants thanks to the virtues of water of lightning, has even much less interest for profiteers. Unfortunately, Tesla was never able to finish his tower. He did not have the opportunity to carry out the planned experiments on Long Island that sought to bring rain in the deserts. Others before him had managed that. We know that Egypt has not always been desertic. The Greek historian Herodotus wrote that "Egypt is a gift of the Nile." But it was in the 5th century BC. Since then, its climate has not changed much, and yet it has not always been so. The predynastic Egypt was rather a gift of the pyramids... "In the pre-dynastic period, the Egyptian climate is much less arid than it is nowadays. Large areas of Egypt are covered with savanna and traversed by herds of ungulates. The foliage and wildlife then are much more prolific and the Nile region is home to large populations of waterfowl. Hunting is a common activity for the Egyptians and it is also during this period that many animals are domesticated for the first time."
www.apparentlyapparel.com/news/the-pyramid-energy-tesla-c...
"....If we could produce electric effects of the required quality, this whole planet and the conditions of existence on it could be transformed. The sun raises the water of the oceans and winds drive it to distant regions where it remains in state of most delicate balance. If it were in our power to upset it when and wherever desired, this mighty life-sustaining stream could be at will controlled. We could irrigate arid deserts, create lakes and rivers and provide motive power in unlimited amount. This would be the most efficient way of harnesing the sun to the uses of man......" ( Nikola Tesla, June 1919 )
Nikola Tesla, inventor of alternating current motors, did the basic research for constructing electromagnetic field lift-and-drive aircraft/space craft. From 1891 to 1893, he gave a set of lectures and demonstrations to groups of electrical engineers. As part of each show, Tesla stood in the middle of the stage, using his 6' 6" height, with an assistant on either side, each 7 feet away. All 3 men wore thick cork or rubber shoe soles to avoid being electrically grounded. Each assistant held a wire, part of a high voltage, low current circuit. When Tesla raised his arms to each side, violet colored electricity jumped harmlessly across the gaps between the men. At high voltage and frequency in this arrangement, electricity flows over a surface, even the skin, rather than into it. This is a basic circuit which could be used by aircraft / spacecraft.
The hull is best made double, of thin, machinable, slightly flexible ceramic. This becomes a good electrical insulator, has no fire danger, resists any damaging effects of severe heat and cold, and has the hardness of armor, besides being easy for magnetic fields to pass through.
The inner hull is covered on it's outside by wedge shaped thin metal sheets of copper or aluminum, bonded to the ceramic. Each sheet is 3 to 4 feet wide at the horizontal rim of the hull and tapers to a few inches wide at the top of the hull for the top set of metal sheets, or at the bottom for the bottom set of sheets. Each sheet is separated on either side from the next sheet by 1 or 2 inches of uncovered ceramic hull. The top set of sheets and bottom set of sheets are separated by about 6 inches of uncovered ceramic hull around the horizontal rim of the hull.
The outer hull protects these sheets from being short-circuited by wind blown metal foil (Air Force radar confusing chaff), heavy rain or concentrations of gasoline or kerosene fumes. If unshielded, fuel fumes could be electrostatically attracted to the hull sheets, burn and form carbon deposits across the insulating gaps between the sheets, causing a short-circuit. The space, the outer hull with a slight negative charge, would absorb hits from micrometeorites and cosmic rays (protons moving at near the speed of light). Any danger of this type that doesn't already have a negative electric charge would get a negative charge in hitting the outer hull, and be repelled by the metal sheets before it could hit the inner hull. This wouldn't work well on a very big meteor, I might add.
The hull can be made in a variety of shapes; sphere, football, disc, or streamlined rectangle or triangle, as long as these metal sheets, "are of considerable area and arranged along ideal enveloping surfaces of very large radii of curvature," p. 85. "My Inventions", by Nikola Tesla.
The power plant for this machine can be a nuclear fission or fusion reactor for long range and long-term use to run a steam engine, which turns the generators. A short range machine can use a hydrogen oxygen fuel cell to run a low-voltage motor to turn the generators, occasionally recharging by hovering next to high voltage power lines and using antennas mounted on the outer hull to take in the electricity. The short-range machine can also have electricity beamed to it from a generating plan on a long-range aircraft / spacecraft or on the ground.
(St. Louis Post-Dispatch, Nov. 24, 1987, Vol 109, No. 328, "The Forever Plane" by Geoffrey Rowan, p. D1, D7.)
("Popular Science", Vol 232, No. 1, Jan. 1988, "Secret of Perpetual Flight? Beam Power Plane," by Arthur Fisher, p. 62-65, 106)
One standard for the generators is to have the same number of magnets as field coils. Tesla's preferred design was a thin disc holding 480 magnets with 480 field coils wired in series surrounding it in close tolerance. At 50 revolutions per minute, it produces 19,400 cycles per second.
The electricity is fed into a number of large capacitors, one for each metal sheet. An automatic switch, adjustable in timing by the pilot, closes, and as the electricity jumps across the switch, back and forth, it raises it's own frequency; a switch being used for each capacitor.
The electricity goes into a Tesla transformer; again, one transformer for each capacitor. In an oil tank to insulate the windings and for cooling, and supported internally by wood, or plastic, pipe and fittings, each Tesla transformer looks like a short wider pipe that is moved along a longer, narrower pipe by an insulated non-electric cable handle. The short pipe, the primary, is 6 to 10 windings (loops) of wire connected in series to the long pipe. The secondary is 460 to 600 windings, at the low voltage and frequency end.
The insulated non-electric cable handle is used through a set of automatic controls to move the primary coil to various places on the secondary coil. This is the frequency control. The secondary coil has a low frequency and voltage end and a maximum voltage and frequency end. The greater the frequency the electricity, the more it pushes against the earth's electrostatic and electromagnetic fields.
The electricity comes out of the transformer at the high voltage end and goes by wire through the ceramic hull to the wide end of the metal sheet. The electricity jumps out on and flows over the metal sheet, giving off a very strong electromagnetic field, controlled by the transformer. At the narrow end of the metal sheet, most of the high-voltage push having been given off; the electricity goes back by wire through the hull to a circuit breaker box (emergency shut off), then to the other side of the generators.
In bright sunlight, the aircraft / spacecraft may seem surrounded by hot air, a slight magnetic distortion of the light. In semi-darkness and night, the metal sheets glow, even through the thin ceramic outer hull, with different colors. The visible light is a by-product of the electricity flowing over the metal sheets, according to the frequencies used.
Descending, landing or just starting to lift from the ground, the transformer primaries are near the secondary weak ends and therefore, the bottom set of sheets glow a misty red. Red may also appear at the front of the machine when it is moving forward fast, lessening resistance up front. Orange appears for slow speed. Orange-yellow is for airplane-type speeds. Green and blue are for higher speeds. With a capacitor addition, making it oversized for the circuit, the blue becomes bright white, like a searchlight, with possible risk of damaging the metal sheets involved. The highest visible frequency is violet, like Tesla's stage demonstrations, used for the highest speed along with the bright white. The colors are nearly coherent, of a single frequency, like a laser.
A machine built with a set of super conducting magnets would simplify and reduce electricity needs from a vehicle's transformer circuits to the point of flying along efficiently and hovering with little electricity.
When Tesla was developing arc lights to run on alternating current, there was a bothersome high-pitched whine, whistle, or buzz, due to the electrodes rapidly heating and cooling. Tesla put this noise in the ultrasonic range with the special transformer already mentioned. The aircraft / spacecraft gives off such noises when working at low frequencies.
Timing is important in the operation of this machine. For every 3 metal sheets, when the middle one is briefly turned off, the sheet on either side is energized, giving off the magnetic field. The next instant, the middle sheet is energized, while the sheet on either side is briefly turned off. There is a time delay in the capacitors recharging themselves, so at any time, half of all the metal sheets are energized and the other half are recharging, alternating all around the inner hull. This balances the machine, giving it very good stability. This balance is less when fewer of the circuits are in use.
Fairly close, the aircraft / spacecraft produces heating of persons and objects on the ground; but by hovering over an area at low altitude for maybe 5 or 10 minutes, the machine also produces a column of very cold air down to the ground. As air molecules get into the strong magnetic fields that the machine is transmitting out, the air molecules become polarized and from lines, or strings, of air molecules. The normal movement of the air is stopped, and there is suddenly a lot more room for air molecules in this area, so more air pours in. This expansion and the lack of normal air motion make the area intensely cold.
This is also the reason that the aircraft / spacecraft can fly at supersonic speeds without making sonic booms. As air flows over the hull, top and bottom, the air molecules form lines as they go through the magnetic fields of the metal sheet circuits. As the air molecules are left behind, they keep their line arrangements for a short time; long enough to cancel out the sonic boom shock waves.
Outside the earth's magnetic field, another propulsion system must be used, which relies on the first. You may have read of particle accelerators, or cyclotrons, or atomsmashers. A particle accelerator is a circular loop of pipe that, in cross-section, is oval. In a physics laboratory, most of the air in it is pumped out. The pipe loop is given a static electric charge; a small amount of hydrogen or other gas is given the same electric charge so the particles won't stick to the pipe. A set of electromagnets all around the pipe loop turn on and off, one after the other, pushing with one magnetic pole and pulling with the next, until those gas particles are racing around the pipe loop at nearly the speed of light. Centrifugal force makes the particles speed closer to the outside edge of the pipe loop, still within the pipe. The particles break down into electrons, or light and other wavelengths, protons or cosmic rays, and neutrons if more than hydrogen is put in the accelerator.
At least 2 particle accelerators are used to balance each other and counter each other's tendency to make the craft spin. Otherwise, the machine would tend to want to start spinning, following the direction of the force being applied to the particles. The accelerators push in opposite directions.
As the pilot and crew travel in space, outside the magnetic field of a world, water from a tank is electrically separated into oxygen and hydrogen. Waste carbon dioxide that isn't used for the onboard garden, and hydrogen (helium if the machine is using a fusion reactor) is slowly, constantly fed into the inside curves of both accelerators.
The high-speed particles go out through straight lengths of pipe, charged like the loops and in speeding out into space, push the machine along. Doors control which pips the particles leave from. This allows very long-range acceleration and later deceleration at normal (earth) gravity. This avoids the severe problems of weightlessness, including lowered physical abilities of the crew.
It is possible to use straight-line particle accelerators, even as few as one per machine, but these don't seem as able to get the best machine speed for the least amount of particles pushed out.
Using a constant acceleration of 32.2 feet per second per second provides earth normal gravity in deep space and only 2 gravities of stress in leaving the earth's gravity field. It takes, not counting air resistance, 18 minutes, 58.9521636 seconds to reach the 25,000 miles per hour speed to leave the earth's gravity field. It takes about 354 days, 12 hours, 53 minutes and 40 seconds (about) to reach the speed of light - 672,487,072.7 miles per hour. It takes the same distance to decelerate as it does to speed up, but this cuts down the time delay that one would have in conventional chemical rocketry enormously, for a long journey.
A set of super conducting magnets can be charged by metal sheet circuits, within limits, to whatever frequency is needed and will continue to transmit that magnetic field frequency almost indefinitely.
A short-wave radio can be used to find the exact frequencies that an aircraft / spacecraft is using, for each of the colors it may show whole a color television can show the same overall color frequency that the nearby, but not extremely close, craft is using This is limited, as a machine traveling at the speed of a jet airliner may broadcast in a frequency range usually used for radar sets.
The craft circuits override lower frequency, lower voltage electric circuits within and near their electromagnetic fields. One source briefly mentioned a 1941 incident, where a short-wave radio was used to override automobile ignition systems, up to 3 miles away. When the short-wave radio was turned off, the cars could work again. How many UFO encounters have been reported in which automobile ignition systems have suddenly stopped?
I figure that things would not be at all pleasant for drivers of modern cars with computer controlled engine and ignition systems. Computer circuitry is sensitive to small changes in voltage and a temporary wrong-way voltage surge may wipe the computer memory out. It could mean that a number of drivers would suddenly be stranded with their cars not working should such a craft fly low over a busy highway. Only diesel engines, already warmed up, and Stanley Steamer type steam engine cares are able to continue working in a strong electromagnetic field. In May, 1988, it was reported that the U.S. Army had lost 5 Blackhawk helicopters and 22 crewmen in crashes caused by ordinary commercial radio broadcasting overriding the computer control circuits of those helicopters. Certainly, computer circuits for this aircraft / spacecraft can and must be designed to overcome this weakness.
One construction arrangement for this craft to avoid such interference is for the metal sheet circuits to be more sharply tuned. Quartz or other crystals can be used in capacitors; in a very large number of low-powered, single frequency circuits, or as part of a frequency control for the metal sheet circuits.
The aircraft / spacecraft easily overrides lower frequency and lower voltage electric circuits up to a 6 mile wide circle around it, but the effect is usually not tuned for such a drastic show. It can be used for fire fighting: by hovering at a medium-low height at low frequency, it forms a double negative pole magnet of itself and the ground, the sides being a rotation of positive magnetic pole.
It polarizes the column of air in this field. The air becomes icy cold. If it wouldn't put the fire out, it would slow it down.
Tesla went broke in the early 1900's building a combination radio and electric power broadcasting station. The theory and experiments were correct but the financiers didn't want peace and prosperity for all.
The Japanese physicist who developed super conducting material with strong magnetism allows for a simplified construction of the aircraft / spacecraft. Blocks of this material can be used in place of the inner hull metal sheets. By putting electricity in each block, the pilot can control the strength of the magnetic field it gives off and can reduce the field strength by draining some of the electric charge. This allows the same amount of work to be done with vastly less electricity used to do it.
It is surprising that Jonathan Swift, in his "Gulliver's Travels", 1726, third book, "A Voyage to Laputa", described an imagined magnetic flying island that comes close to being what a large super conducting aircraft / spacecraft can be build as, using little or no electric power to hover and mover around.
www.thelivingmoon.com/41pegasus/02files/Tesla_Saucer.html
Before our study group, Summerville, South Carolina #2, made a trip to A.R.E headquarters in Virginia Beach, Va., in April, 2009, Jerry Ingle, set into motion an ideal that generated a monumental synchronicity. For years, Jerry, a long-time member of our group, had been interested in Nikola Tesla. He saw many parallels between his talents and those of Edgar Cayce and hoped to somehow connect them. As a psychic, Edgar Cayce had been consulted by engineers about their inventions. Cayce was willing to help as long as it would ultimately be of service to humanity. While there are suggestions that both Thomas Edison and his former associate, Nikola Tesla, consulted Cayce separately; there is no documentation in the A.R.E. archives.
Nikola Tesla was an electrical engineer who invented the alternating current Niagara power system that made Edison's direct current obsolete. He sold Westinghouse 40 patents that broke the General Electric monopoly. In 1893 he demonstrated the use of wireless radio control with a torpedo-like boat. He invented wireless transmission of electricity, an electric car that ran by tapping into the electricity of the Earth, the microwave, and the TV remote control, just to name a few. A court recently ruled that while Marconi had been given credit for the invention of the radio and made a fortune on it, Tesla was the true inventor.
Tesla was concerned with harnessing nature to meet the needs of humankind and foresaw the end of World War I as a synthesis of history, philosophy, and science,. He had the amazing ability to construct a machine in his mind and then, by operating the device in his mind, make improvements to the design. He could develop and perfect his inventions by drawing only upon the creative forces, without actually touching anything material. Just as the Cayce readings suggest, "Mind is the builder, physical is the result."
Another inventor that Edgar Cayce met was a man named Marion L. Stansell. During World War I, while stationed in France, Stansell had a near death experience with a vision. During the experience, a "spirit guide" escorted him to another dimension where he was given a formula for a mechanical device. He was told that this device would save the planet from environmental destruction in the next millennium.
On February 1, 1928, Edgar Cayce gave a reading which confirmed that Stansell was able to see the blueprints for a revolutionary type of motor in his dreams and visions. According to the readings, the motor was designed in the spirit realm by De Witt Clinton, deceased governor of New York, who in his last incarnation was the force behind the development of the Erie Canal.
Stansell needed the assistance of Edgar Cayce to relay precise technical information from Clinton in the spirit realm to Stansell and a team of like-minded entrepreneurs in the material world. The Stansell motor readings were conducted over a two-year period. One could speculate that Mr. Cayce did the same for Nikola Tesla, and that these readings were a continuation of that work, but if so, there is no record of it.
Jerry believed that there was a deep connection between the work of Cayce and Tesla and their interest in the connection between electricity and psychic phenomena. At A.R.E., Jerry found his way to the vault, where the Cayce records are kept, hoping to discover a way to get these plans into the hands of present-day inventors.
There, he and an A.R.E. volunteer named Harry talked excitedly for some time about Tesla. Suddenly, a man came to the door of the vault. "Does anybody know if there was ever a connection between Edgar Cayce and Nikola Tesla?"
"Here is the guy who can tell you," said Harry as he pointed toward Jerry. Jerry turned to face Nikola Lonchar — the President of Nikola Tesla's Inventors Club, a man who was dedicated to locating and preserving Tesla's work. The organization was made up of scientists who wanted to be sure Tesla's work was not lost! This was the first visit to A.R.E. by anyone from the Tesla organization.
Jerry was able to supply the visitor with the information he needed. The two sat in the lobby of the A.R.E. Visitor Center, oblivious to their surroundings, talking about an interest that held them both captive. Jerry was invited to speak at the next Nikola Tesla Inventors conference.
Nikola Lonchar was at A.R.E. for only one day. During this small window of time, he and Jerry had converged at the same place, at the same time, both equipped with a desire to be of service to Cayce, to Tesla, and to humanity. That's synchronicity in motion.
www.edgarcayce.org/about-us/blog/blog-posts/synchronicity...
Waste Management Moreno Valley
Unincorporated Perris/Riverside, CA
1/22/16
Autocar Heil Freedom Superlight Curotto can
Back in November, WMmaster626 and I went to Moreno Valley and found a truly one of a kind refuse truck, especially in SoCal! A Autocar Heil Freedom Superlight Curotto can, unfortunately we were not able to film it in November and often WMmaster626 and I would talk about the superlight and wanting to film it. So on 1/22/16 we went to Waste Managements Moreno Valley MRF, waited for the Superlight to arrive and followed it to Unincorporated Perris/Riverside. During our November visit we spoke to a real nice driver named Dave who has been with WM for 27 years. We talked to him for a while and eventually NEWCO Waste Systems got brought up and he talked about WM Moreno Valley getting some of their routes in 1999. Unincorporated Perris/Riverside is the area Dave must have been talking about. Many of the NEWCO carts WMmaster626 has filmed in Arcadia were in this area. There were NEWCO zarns, 96 gallon blue and black toters even black and blue Rehrigs and of course 96 gallon black Turn-Keys along with NEWCO dumpsters that were still blue with NEWCO logos on them. We also found a Heil Python on route that was fun to watch.
So between the Superlight, the Python and perhaps the biggest shock, a ex NEWCO route it was a great day full of surprises. Thank you WMmaster626 for coming and arranging today, Thank you John (Superlight) and Raul (Python), you are both very professional and efficient drivers. I would also like to Thank John Curotto and the Curotto staff who made this awesome carry can. AFL’s have always been my favorite refuse truck. I grew up with S.T.S. Autobuckets, Heil Autocans and of course Curotto cans, so thanks for making this amazing carry can!
Invented in 2009, the Superlight is a Curotto can that is lighter than the Slammin Eagle. The dumpter is primarily made of special high strength Kevlar fabric and weighs only 1,200 pounds (compared to a Slammin Eagle which is closer to 2,000 pounds).
Please check out my YouTube video:
www.youtube.com/watch?v=uFqTWNtFiJ0
Please check out WMmaster626 video of this truck:
GP38 #3829 brings westbound SLN3 into Niagara Falls, NY on 9/1/85. In the early days of the Sea-Land landbridge service some containers moved on regular flats. When this happened the preferred routing was the C&O route west of Buffalo through Canada to Detroit & Chicago as it was shorter and required fewer crews. When double stacks were used, the B&O west of Buffalo to New Castle, PA and beyond was used as the Detroit River tunnel on the C&O could not accommodate high cars at that time.(CSS1228c)
Southern approach viaduct MSS Webster (Movable Scaffolding System) being prepared for the casting of second section over the Manchester ship canal at Astmoor Runcorn..........Please. note ALL pictures on this Photostream are Copyright Protected
Description Famed astronaut Neil A. Armstrong, the first man to set foot on the moon during the historic Apollo 11 space mission in July 1969, served for seven years as a research pilot at the NACA-NASA High-Speed Flight Station, now the Dryden Flight Research Center, at Edwards, California, before he entered the space program. Armstrong joined the National Advisory Committee for Aeronautics (NACA) at the Lewis Flight Propulsion Laboratory (later NASA's Lewis Research Center, Cleveland, Ohio, and today the Glenn Research Center) in 1955. Later that year, he transferred to the High-Speed Flight Station at Edwards as an aeronautical research scientist and then as a pilot, a position he held until becoming an astronaut in 1962. He was one of nine NASA astronauts in the second class to be chosen. As a research pilot Armstrong served as project pilot on the F-100A and F-100C aircraft, F-101, and the F-104A. He also flew the X-1B, X-5, F-105, F-106, B-47, KC-135, and Paresev. He left Dryden with a total of over 2450 flying hours. He was a member of the USAF-NASA Dyna-Soar Pilot Consultant Group before the Dyna-Soar project was cancelled, and studied X-20 Dyna-Soar approaches and abort maneuvers through use of the F-102A and F5D jet aircraft. Armstrong was actively engaged in both piloting and engineering aspects of the X-15 program from its inception. He completed the first flight in the aircraft equipped with a new flow-direction sensor (ball nose) and the initial flight in an X-15 equipped with a self-adaptive flight control system. He worked closely with designers and engineers in development of the adaptive system, and made seven flights in the rocket plane from December 1960 until July 1962. During those fights he reached a peak altitude of 207,500 feet in the X-15-3, and a speed of 3,989 mph (Mach 5.74) in the X-15-1. Armstrong has a total of 8 days and 14 hours in space, including 2 hours and 48 minutes walking on the Moon. In March 1966 he was commander of the Gemini 8 orbital space flight with David Scott as pilot - the first successful docking of two vehicles in orbit. On July 20, 1969, during the Apollo 11 lunar mission, he became the first human to set foot on the Moon.
Credit: NASA
Image Number: E56-2607
Date: January 1956
Spacelab employed a modular system of pallets and even an Instrument Pointing System that aimed instruments toward the Earth, sun or stars. Here, Spacelab 2 uses pallets and the pointing system. Before Spacelab, instruments were pointed toward particular celestial objects or areas by maneuvering the shuttle to an appropriate attitude. The Spacelab pointing system aimed instruments more accurately than the shuttle and kept them fixed on a target as the shuttle moved. Spacelab 2 was flown on the STS-51F launched on July 29, 1985, aboard the space shuttle Challenger. NASA's Marshall Space Flight Center in Huntsville, Ala, managed the Spacelab Program and the Spacelab 2 mission.
Image credit: NASA
Marshall Space Flight Center History, Flickr photoset:
www.flickr.com/photos/nasamarshall/sets/72157636868630444/
_____________________________________________
These official NASA photographs are being made available for publication by news organizations and/or for personal use printing by the subject(s) of the photographs. The photographs may not be used in materials, advertisements, products, or promotions that in any way suggest approval or endorsement by NASA. All Images used must be credited. For information on usage rights please visit: www.nasa.gov/audience/formedia/features/MP_Photo_Guidelin...
Charlie Blackwell-Thompson, launch director, Exploration Ground Systems, participates in the 11th terminal countdown simulation for the Artemis I launch inside Kennedy Space Center’s Launch Control Center on Oct. 14, 2021. The event marked the first time members of NASA’s mission management team and launch team conducted the simulation together. During Artemis I, the agency’s Orion spacecraft will lift off from Kennedy aboard NASA’s most powerful rocket – the Space Launch System – to fly farther than any spacecraft built for humans has ever flown. Through NASA’s Artemis missions, the agency, along with commercial and international partners, will establish a sustainable human presence on the Moon to prepare for missions to Mars. Photo credit: NASA/Kim Shiflett
A project sponsored by the German kitchen manufacturer Miele. We designed a hydroponic cultivation system for growing vegetables in the home.
I have been lost in Photoshop. I was having ideas in Lightroom and they led to edits and on to Photoshop CS and from there they are stretching out towards some notion of motion pictures. I have not used this Film Temperature Control System. I have been calling a film cooker. It looks superb and it comes with a three pin U.K. Plug fitted ready for accurate simmering film into tender toner and sharpish shadows and might fine highlights.
I have used two fonts to give °CineStill a look as it has in the packaging.
I forget to mention the soundtrack. Two tracks from those provided by my editing service with no composers and players listed. I have edited tracks individually and together. All errors on me and all praise to unknown originators of music. I wish that I had some names to praise.
© PHH Sykes 2023
phhsykes@gmail.com
CineStill TCS-1000 - Temperature Control System - UK Plug
analoguewonderland.co.uk/products/cinestill-tcs-1000-temp...
°CS "TEMPERATURE CONTROL SYSTEM", TCS-1000 IMMERSION CIRCULATOR THERMOSTAT FOR MIXING CHEMISTRY AND PRECISION FILM PROCESSING, 120V ONLY
cinestillfilm.com/products/tcs-temperature-control-system...
“It’s very juicy to twirl your mustache and figure out why people do the horrible things that they do. It’s not just because they are evil, but because that’s how they somehow explain the world to themselves and justify themselves. It’s always interesting figuring out how that happens.” ~Zeljko Ivanek
When I first saw this gundam I can honestly say I hated the design, but hours of Xbox playing it on Dynasty Warriors Gundam 3, got me to appreciate the unique design. :)