Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

Download the file from: www.thingiverse.com/thing:932468

This generic pull-knob for cabinet drawers is easy to 3D-print and mount on any flat surface using a standard and commonly available M4 screw.

The knob can be placed directly on a flat surface or recessed into a 14 mm hole. The cone-shaped recessed version of the knob also allows for glueing instead of screwing.

The bore in this knob is designed to be slightly smaller than 4 mm when 3D-printed, thus making it possible to use a standard M4 screw without needing a nut or tapping the hole it in advance. We recommend you to use as long screws as possible to achieve a strong thread-grip.

We designed this knob as a part of a project where an old pharmacy counter from 1906 was salvaged from becoming scrap. Some knobs where missing and instead of making new ones on a lathe we decided to 3D-print in thick layers using brown PLA filament.

There is of course a story here. The previous tenant of the Caroline Collective made artificial joints. And there are strangely enough bone fragments and metal joint discards laying around. Very odd.

It is also odd that Matt and Ned leave these things lying about. So here is to coworking.... with ghosts?

A Reliable brand name in aftermarket parts of heavy earthmoving, mining, Construction equipment parts for the models like caterpillar, komatsu, terex, Volvo, diesel engine, cummins, hitachi, kobelco, jcb, replacement parts solutions provided by us. for more information visit : www.semspares.com

This 1969 Chevrolet Camaro Restomod was in the Cars for Sale area at the Houston Corvette Chevy Expo last February. It had a frame off restoration with only 500 miles on it since it was finished. It has a 350 V8 Motor with Vortech Heads, Bowtie Intake, Upgraded Radical Cam...Perfect for Cruising. 750 Edelbrock Carbuerator, Performer Series MSD E-Curve Ignition System and wires...and a ton more!!! A very sharp car indeed! The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

This 1969 Chevrolet Camaro Restomod was in the Cars for Sale area at the Houston Corvette Chevy Expo last February. It had a frame off restoration with only 500 miles on it since it was finished. It has a 350 V8 Motor with Vortech Heads, Bowtie Intake, Upgraded Radical Cam...Perfect for Cruising. 750 Edelbrock Carbuerator, Performer Series MSD E-Curve Ignition System and wires...and a ton more!!! A very sharp car indeed! The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

This 1969 Chevrolet Camaro Restomod was in the Cars for Sale area at the Houston Corvette Chevy Expo last February. It had a frame off restoration with only 500 miles on it since it was finished. It has a 350 V8 Motor with Vortech Heads, Bowtie Intake, Upgraded Radical Cam...Perfect for Cruising. 750 Edelbrock Carbuerator, Performer Series MSD E-Curve Ignition System and wires...and a ton more!!! A very sharp car indeed! The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

This 1969 Chevrolet Camaro Restomod was in the Cars for Sale area at the Houston Corvette Chevy Expo last February. It had a frame off restoration with only 500 miles on it since it was finished. It has a 350 V8 Motor with Vortech Heads, Bowtie Intake, Upgraded Radical Cam...Perfect for Cruising. 750 Edelbrock Carbuerator, Performer Series MSD E-Curve Ignition System and wires...and a ton more!!! A very sharp car indeed! The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

1970 #Chevrolet #Chevelle owned by Bob Meize. It has the 396CI matching numbers engine and 4-speed transmission. Comes with Factory A/C, PowerSteering, Power Brakes, 8 track stereo. The retored Chevelle has Factory interior and the factory racing stripes. The car was recently finished by @Mo-Muscle-Cars in Conroe Texas..

.

The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

Note the caps: This is not gunge leaking out! Just the old fixing compound applied at the factory during shipping transportation,

As the board is mounted on its side

The board will be cleaned up and new capacitors fitted, The old caps are approx 25 yrs old!

73, de Dave GW4JKR / 2W0DAA

2Rh "Cyber Sword"

+d8Rh "Cyber Sword"

1G "Trubo Wheels"

1Y "Censor"

+d8G (for no ranged weapons)

Captain's Right (if chosen)-Turbo Slash: The Road Wraith dashes forward and cuts down any enemies in it's path with unparalleled speed!

Move this Frame exactly one ruler length in a straight line. Apply combat stage to any enemies in this path. Enemies hit by this attack can NOT return fire during this combat stage. +1P to Rh attack power. Can one be cast once per round, on any frame's turn. (as long as The Road Wraith is apart of that combat stage) If it is The Road Wraith's turn when this Right is activated, it does NOT count as this Frame's movement for this turn. However, if you cast this Right, The Road Wraith can NOT declare a normal attack this turn.

LDD: www.dropbox.com/s/pqf7i4lj9dfbr7z/Green_Mech4_Road-Wraith...

All bricks and pieces can be found as shown on Lego.com pick-a-brick shop.lego.com/en-US/Pick-A-Brick-ByTheme or LEGO.com "replace missing parts" service.lego.com/en-us/replacementparts#BasicInfo

1970 #Chevrolet #Chevelle owned by Bob Meize. It has the 396CI matching numbers engine and 4-speed transmission. Comes with Factory A/C, PowerSteering, Power Brakes, 8 track stereo. The retored Chevelle has Factory interior and the factory racing stripes. The car was recently finished by @Mo-Muscle-Cars in Conroe Texas..

The Corvette Chevy Expo is an All Indoor Corvette and Chevrolet event, full of Chevrolet vendors, Show Cars, and Cars for Sale, held annually in Houston, Texas and Dallas, Texas. corvettechevyexpo.com/

for 7 years i have owned the convertible, it's been practically problem-free. now i need to do some repair work on it. if you recognize these parts, i'd like to seek your advice.

i'd like to know how difficult it is to remove the old bushing. i have a puller, which i used once many years ago to remove a ball joint. at the moment i don't know if it's big enough. also, how difficult is it to hammer the new bushing into the control arm? since it's rubber, i guess neither would be too difficult. last but not least, how does one jack up a 330 CiC properly? i have two hydraulic jacks and 4 jack stands.

Further renovation repair replacement parts being fitted to my old Yaesu FT-102 HF Transceiver, Re-Capping Rectifier board A & Board B, And changing some out of spec resistors etc,

Nice classic radio this one, Uses three 6146b's in the PA

And has a very good receiver

73, de Dave GW4JKR / 2W0DAA

Further renovation repair replacement parts being fitted to my old Yaesu FT-102 HF Transceiver, Re-Capping Rectifier board A & Board B, And changing some out of spec resistors etc,

Nice classic radio this one, Uses three 6146b's in the PA

And has a very good receiver

73, de Dave GW4JKR / 2W0DAA

Further renovation repair replacement parts being fitted to my old Yaesu FT-102 HF Transceiver, Re-Capping Rectifier board A & Board B, And changing some out of spec resistors etc,

Nice classic radio this one, Uses three 6146b's in the PA

And has a very good receiver

73, de Dave GW4JKR / 2W0DAA

Further renovation repair replacement parts being fitted to my old Yaesu FT-102 HF Transceiver, Re-Capping Rectifier board A & Board B, And changing some out of spec resistors etc,

Nice classic radio this one, Uses three 6146b's in the PA

And has a very good receiver

73, de Dave GW4JKR / 2W0DAA

Further renovation repair replacement parts being fitted to my old Yaesu FT-102 HF Transceiver, Re-Capping Rectifier board A & Board B, And changing some out of spec resistors etc,

Nice classic radio this one, Uses three 6146b's in the PA

And has a very good receiver

73, de Dave GW4JKR / 2W0DAA

2Rd "Plasma Rifle Arm Mount"

2Ra "Missile Pod"

1Y "radio Antenna"

LDD: www.dropbox.com/s/vhrrvuz61natot5/Green_Mech3_The-Soldier...

All bricks and pieces can be found as shown on Lego.com pick-a-brick shop.lego.com/en-US/Pick-A-Brick-ByTheme or LEGO.com "replace missing parts" service.lego.com/en-us/replacementparts#BasicInfo

2Rh "Laser Lance" (reach_1-2units)

2Rd "Wrist Mounted 20mm Machine Gun"

1B "Cyber Shield"

1G "Wing Jets"

Captain's Right (if chosen)-Cyber Shockwave:The Lancelot swings it's Laser Lance to create a massive crescent of energy to sweep away it's foes!

Measure 1 ruler length in any direction around "Lancelot". In a straight line, conduct combat stage with any enemy unit's in the target path. Use all Rd+1P to calculate. Enemies within the trajectory can only return fire to this attack with Rd. Can only be cast once per round on any Frame's turn. (as long as The Lancelot is apart of that combat stage)

LDD: www.dropbox.com/s/h0m7wwc8ri3yi0y/Green_Mech1_The-Lancelo...

All bricks and pieces can be found as shown on Lego.com pick-a-brick shop.lego.com/en-US/Pick-A-Brick-ByTheme or LEGO.com "replace missing parts" service.lego.com/en-us/replacementparts#BasicInfo

CPI designs and manufactures a full line of compressor packing cases, intermediate partition packing cases and wiper cases for your reciprocating compressor’s piston rod sealing system.

•Precision machined from cast iron, bronze alloy steel or stainless steel

•Available in cooled or non-cooled for use in both oil-free and lubricated applications to satisfy the full spectrum of temperatures, pressures and corrosive conditions

•Designed to meet all environmental concerns and regulations including available vent and purge designed assemblies for fugitive emissions reductions

•Redesign of your existing compressor packing case designs to a purge design assembly also available

•All packing and wiper cases are designed to be easily reconditioned when needed to maximize service life

www.c-p-i.com

The TRP engine program features new, non-remanufactured TRP Turbochargers which are available with no core charge. TRP turbochargers are designed for increased durability and improved turbo life and all turbochargers are tested to ensure reliable performance.

Under the roof of Cologne's cathedral there are workshops and some storage rooms. Here we see a leave-like shaped decorative element. You might call it a spare part for the gigantic church.

In December 2014 we had the opportunity to explore all this when we were guided over the roofs and through the attic storeys of the wonderful cathedral. The oldest parts of this world famous building are from 1248 but the huge church was not finished before 1880. The site is a place of worship for ca. 1.700 years now because the Romans built the first temple in this very place.

A network of 2,000 parts and service locations around the world support TRP parts. These authorized retailers are backed by a worldwide network of 17 parts distribution centers, as well as product support through PACCAR Parts' sales, marketing and customer service departments. TRP began in Europe in response to the need of fleets looking for a line of reliable and proven parts that could be used with a wide variety of equipment. That need eventually spread, globally. As the program moved to North America, operators and fleets were introduced to a one-stop solution for quality all-makes parts for trucks, trailers and buses.

2014 rings in TRP’s 20th anniversary, with two decades of offering tested and reliable replacement parts for all makes of trucks, trailers, buses and engines.

TRP today offers a wide range of parts from exhausts to transmissions and from brakes to LED lighting –100,000 parts worldwide. TRP parts are supported through a network of 2,000 parts and service locations around the world.

This is my personal company that I will be using in my upcoming battles. Or at least a digital screen shot of them lol. All the parts can be ordered as seen here from LEGO.com pick-a-brick or LEGO.com "replace missing parts"

shop.lego.com/en-US/Pick-A-Brick-ByTheme

service.lego.com/en-us/replacementparts#BasicInfo

The 6 humanoid Frames are based on the design of Eduty's "Annie" HUGE SHOUT OUT to him. www.flickr.com/photos/92416040@N08/13580663524/

TRP LED work lamps offer a compact, durable design that provides bright, uniform lighting for better visibility. TRP LED work lamps have a low power draw and also come with a lengthy 10 year warranty.

Using natural cleaning agents to power through dirt, bugs and tree sap, TRP Premium windshield wash also beads and repels rain to keep windshields clear for improved visibility. TRP’s windshield wash offers all-season performance with freeze protection to -30 degrees Fahrenheit.

TRP today offers a wide range of parts from exhausts to transmissions and from brakes to LED lighting –100,000 parts worldwide. TRP parts are supported through a network of 2,000 parts and service locations around the world.

1G "Jump Pack"

1Y "Laser Scope"

2Ra "Sniper Rifle Arm Mount"

LDD: www.dropbox.com/s/d0uke7ca58nnk1k/Green_Mech5_Hop-Gun.lxf

All bricks and pieces can be found as shown on Lego.com pick-a-brick shop.lego.com/en-US/Pick-A-Brick-ByTheme or LEGO.com "replace missing parts" service.lego.com/en-us/replacementparts#BasicInfo

OEM and Replacement Lube Boxes and Pumps to Retrofit:

Ariel, Trabon, Graco, Lubriquip, Manzel, Ajax, Lincoln, Dropsa, Premier, Progressive, Chicago Pneumatic, Energy Industries, Ingersoll Rand, Cooper Axis, Dresser-Rand, Gemini, White Superior,Worthington Cub, Cooper Bessemer, Clark

We stock replacement lubricator boxes for all engine and compressor applications.

www.c-p-i.com

TRP LED work lamps offer a compact, durable design that provides bright, uniform lighting for better visibility. TRP LED work lamps have a low power draw and also come with a lengthy 10 year warranty. TRP work lamps are available in variety of lumens and voltage ranges. For more information, visit TRPParts.com.

TRP LED work lamps offer a compact, durable design that provides bright, uniform lighting for better visibility. TRP LED work lamps have a low power draw and also come with a lengthy 10-year warranty.

A Reliable brand name in aftermarket parts of heavy earthmoving and mining equipment parts of caterpillar,komatsu,terex,volvo,diesel engine, cummins, perkins, kobelco,jcb,replacement parts solutions provided by us. for more information visit : www.semspares.com

Using natural cleaning agents to power through dirt, bugs and tree sap, TRP Premium windshield wash also beads and repels rain to keep windshields clear for improved visibility. TRP’s windshield wash offers all-season performance with freeze protection to -30 degrees Fahrenheit.

CPI combines a wide variety of materials and designs to meet any specific packing ring requirement - cast iron, and bronze are just a few of the materials offered. All of these materials are available in packing rings designed for unidirectional and bi-directional sealing, low pressure vent sealing, and gas purge sealing. High speed and high pressure rings are also available.

www.c-p-i.com

As a key component of the steering system, TRP pumps provide the correct amount of pressure to decrease steering effort, increase vehicle safety and ease driver fatigue. Every TRP power steering pump is tested to ensure performance, offering drivers peace of mind on the road.

See the parts that Dr. Mobiles has for Apple iPhone 4, 2G, 3G and 3GS repair!

www.drmobiles.co.nz, drmobilesnz@gmail.com

+64211172222

twitter.com/drmobilesnz

drmobiles.posterous.com

doctormobiles.blogspot.com

www.flickr.com/photos/drmobiles

See the parts that Dr. Mobiles has for Apple iPhone 4, 2G, 3G and 3GS repair!

www.drmobiles.co.nz, drmobilesnz@gmail.com

+64211172222

twitter.com/drmobilesnz

drmobiles.posterous.com

doctormobiles.blogspot.com

www.flickr.com/photos/drmobiles

CPI oil wiper rings are designed to effectively provide positive containment of lubricants within the crankcase. Several designs, including tangent cut unidirectional, tangent cut bi-directional and radial cut wiper rings are available in a variety of materials.The CPI LIARD™ scraper is designed specifically for those applications where total oil control is necessary. Available in both cast iron and bronze, the unique design and operation of these rings provide extremely effective containment of lubricants in their intended area as well as long trouble free service.

www.c-p-i.com

1998 Mercedes-Benz ML320 interior. Parting out this car... call us at 1-800-231-1921 with parts requests or questions. Visit us on the web at www.ECAutoSalvage.com where you can view more pictures and check out our large inventory!

CPI offers non-metallic valve plates & rings or blanks

· Manufactured to exact size

· High stock availability

· One source for all your Peek, Nylon & Mid-Temperature valve plates

CPI has extensive experience & capabilities to manufacture and mold thermo-plastic blanks & valve plates in the following materials:

· Glass Filled Peek, Carbon Filled Peek

· Glass Filled Natural & Yellow Nylon

· Glass Filled Mid-Temperature Material

www.c-p-i.com

Professional Apple iPhond 4 Jailbreak, Google Android Repair and BlackBerry Unlocking. Mobile: (021) 117-2222.

twitter.com/drmobilesnz

drmobiles.posterous.com

doctormobiles.blogspot.com

www.flickr.com/photos/drmobiles

1998 Mercedes-Benz ML320, 100k miles, 3.2L, automatic transmission, grey with grey interior. Parting out... call us at 1-800-231-1921 with parts requests or questions. Visit us on the web at www.ECAutoSalvage.com where you can view more pictures and check out our large inventory!