View allAll Photos Tagged Manufacturing,
The Austin Sheerline was a luxury vehicle, manufactured between 1947 and 1954 in the UK. They were purchased for a number of different uses from ambulances just like this one to funeral hearses, limousines and even an ice-cream van.
This particular vehicle was manufactured in 1955 by Herbert Lomas Ltd at their Wilmslow (Cheshire) factory on an extended chassis. It weighs over two tonnes. This weight, coupled with the weight of a full cab of staff and all the necessary equipment meant that these vehicles were very difficult to steer.
The Sheerline was designed by Austin during World War Two, but production did not begin until 1947 because of the national focus on war production. It was a luxurious vehicle in the style of the contemporary Rolls-Royce or Bentley but at a much lower price, around two-thirds that of the equivalent Rolls-Royce vehicle.
Inside the ambulance, surfaces were made to be easily cleaned and modern steel frames meant stretchers could glide in smoothly, ensuring a more comfortable travel for the patient. The back can accommodate another stretcher with the row of seats folded down. These vehicles were simplistic but focused on comfort for the patient.
Originally purchased as a works ambulance, Austin Sheerline XPJ 898 later became part of the Yorkshire Ambulance Service fleet and has been refurbished into the livery of Sheffield Ambulance Service. The vehicle is on display at the National Emergency Services Museum, Sheffield.
The completed 300-piece jigsaw puzzle "Little Fawn's Autumn," from art by Bridget Voth and manufactured by Bits and Pieces.
Vehicle: Citroen C15 Champ 600D.
Engine: 1868cc in-line 4.
Power: 71 BHP.
Fuel: Diesel.
Year of manufacture: 2001.
Date of first registration in the UK: 29th June 2001.
Place of registration: Luton.
Date of latest MOT: 16th January 2025.
Mileage at last MOT: 130,719.
Date of last V5 issued: 7th September 2018.
Date taken: 23rd January 2025.
Album: Carspotting 2025
A view of downtown Chattanooga and the Tennessee River from Renaissance Park on the North Shore. The Tennessee State Aquarium and AT&T Stadium for the Chattanooga Lookouts (Minor League Baseball) are visible. The bridge on the left is Market Street connecting the North Shore to Midtown. The bridge on the right is I-27.
Chattanooga is the fourth largest city in Tennessee with a population of about 178,000. It lies between the Appalachian Mountains and Cumberland Plateau. It is home to the University of Tennessee at Chattanooga, Volkswagen Manufacturing, and the Riverbands Festival.
Lens: 8mm fisheye
SLR Class :- M10a
Manufactures Model :- WDM3a
Introduction year :- 2013
No of Locos :- 06
Loco Nos :- 940 to 945
Builder :- Diesel Locomotive Works (D.L.W.)
State :- India
Prime Mover :- ETA ALCO/DLW V12 "251-B"
Mode of Power transmission :- Diesel Electric (AC to DC Power Transmission )
Power :- 2300 hp
rpm :- 1000
Weight :- 120 ton
Length :- 57' 10"
Wheel arrangement :- Co-Co
Brake system :- Vacuum, Air and Dynamic
Max speed :- 100 Km/h
Gauge :- 1676 mm
Type :- Locomotive
Purpose :- Main line Passenger and Freight train.
Information as at 03.04.2023
Nikon F90 + 20mm F2.8 - Film Adox CHS II
Développement Kodak D76
Reflecta RPS 7200 Filmscanner
Tous droits réservés
Manufacture des Gobelins
Depuis 1662, année où Colbert décida de regrouper les ateliers parisiens en un même lieu, la Manufacture des Gobelins, célèbre dans le monde entier, n’a cessé de marquer de sa signature l’histoire de la tapisserie.
www.mobiliernational.culture.gouv.fr/fr/nous-connaitre/le...
OLYMPUS DIGITAL CAMERA
Nocturnal manufacturing, unable to find out what it was...
Textures: (5) Les Brumes and Skeletalmess.
IMG_7929r Collins Co., Collinsville, CT. Connecticut 19th century ax factory.
The Collins & Company factory opened in 1826 with the purchase of an old gristmill and a few acres of land along the Farmington River in Canton. The company started small with eight men, each making eight axes per day. ... The emerging factory town became known as Collinsville.
The Collins Company Axe Factory, was a manufacturer of edge tools, such as axes, machetes, picks and knives. Collins machetes were the brand of choice in South America. Collins tools were used almost exclusively for the construction of the Trans-Siberian Railway, and axes and picks made their way across the country to be used in the California Gold Rush. Admiral Peary carried Collins tools to the North Pole.
Typical of New England mills, the Collins Company axe factory was sited on a river (the Farmington), and their production was powered by utilizing the water's strength to turn turbines and power machines. The numerous old buildings ramble along the riverbanks intertwined by an intricate maze of sluices that run throughout the site. The company closed its doors in 1966, but the factory buildings stayed standing and are now rented out to local businesses
BHEL Manufactured, Valsad (BL) WAG7 24682 Shines Under The Sun After A Fresh Overhaul With Its WBL85HR Panto Raised & Waits For Starter At Rourkela Jn. With A Freight Load !
Ancienne manufacture de tabacs reconvertie en espace culturel, salles d'expositions, ateliers d'artistes...
The Montauk Paint Manufacturing Company Building at 13th Street and 2nd Avenue in the Gowanus neighborhood of Brooklyn was built in 1908. The building was landmarked in 2019.
Car: Ford Transit.
Year of manufacture: 1978.
Date of first registration in the UK: 1st December 2013.
Region of registration: Birmingham.
Latest recorded mileage: 29,844 (MOT 12th April 2017).
Date of last V5 issued: 11th February 2016.
Date taken: 13th March 2016.
Location: Queen Square, Bristol, UK.
Vieille femme balinaise détachant les différentes parties de clous de Girofle.
J'avais déjà posté cette photo mais le post-traitement que j'y avais effectué ne me convenais pas.
Je voulais y illustrer les difficultés de la vie locale; où des personnes travaillent à même le sol quelque soit leur âge.
Malgré tout, ils semblent heureux.
The metamorphosis in manufacturing....it imperative for companies to rework their strategies to become globally competitive. The 4 week strategic plan we prepared had one objective....to have fun and learn. Our strategy was aimed to de-risk our approach and do it at night. Our technology and development plan was to light up the old Guyndah as you have never seen it before and keep a handle on costs. Finally, our human resource strategy was centered on creating a collaborative approach and team providing provisions for fun and excitement.
HMQS Gayundah was a flat-iron gunboat operated by the Queensland Maritime Defence Force and later the Royal Australian Navy (as HMAS Gayundah). She entered service in 1884 and was decommissioned and sold in 1921. She then served as sand and gravel barge for Brisbane Gravel Pty Ltd until 1950, when she was scrapped. In 1958, Gayundah was run aground at Woody Point at Redcliffe, to serve as a breakwater structure.
This shot was not possible without the f6.3 team, thanks for your efforts, passion and teamwork...Ollie, Alan, Nik, Nick, Beth, Mick
Enjoy my version of the wreck
---
Follow my Vision and Imagination using your iPhone - You might have spotted it there already :-)
Free Photo Guides QLD Location guides from photographers for photographers
---
Fourth entry for the actual castle contest "Nine Kingdoms - Blades of Light" on www.RogueBricks.de";
This one shows the production of cannonballs and parts for weaponry and amor.
Phoenix, AZ
6/14/16
While in Arizona, I had the opportunity to visit the DaDee Manufacturing facility. I met Refuse Arizona the week before at Waste Expo and we were able to arrange a tour at the DaDee Manufacturing facility. On my way to their facility I saw The Scorpion FE Mack LR from Waste Expo pull into the Mack dealership in Phoenix, it was neat seeing that truck twice in one week in two different states. Once I arrived at DaDee Manufacturing Refuse Arizona gave me a tour that started at prefabrication and went all the way to final assembly. I had a great time learning more about the DaDee products and seeing them in person.
Big thank you to everyone at DaDee Manufacturing, they are truly an innovative company with products of the highest quality. And a special thank you to Refuse Arizona for the amazing tour, it was an honor meeting you and Waste Expo and talking about the Waste Industry.
Il y a seulement huit usines de fabrication de cigares faits à la main à Cuba aujourd’hui (contre 120 au début du siècle)Partagas (Francisco Perez allemand parmi les plus connus .)Chaque usine est spécialisée dans un certain nombre de marques d’une saveur particulière. L’usine Partagas, par exemple, se spécialise dans les cigares corsés et la production de six marques dont Bolivar, Ramon Allones, Gloria Cubana et, bien sûr, Partagas. Les fabriques se spécialisent également souvent dans la fabrication d’une gamme particulière de tailles..
Il y a seulement huit usines de fabrication de cigares faits à la main à Cuba aujourd’hui (contre 120 au début du siècle)Partagas (Francisco Perez allemand)Chaque usine est spécialisée dans un certain nombre de marques d’une saveur particulière. L’usine Partagas, par exemple, se spécialise dans les cigares corsés et la production de six marques dont Bolivar, Ramon Allones, Gloria Cubana et, bien sûr, Partagas. Les fabriques se spécialisent également souvent dans la fabrication d’une gamme particulière de tailles. L’usine de trois étages Partagas a été construite dans le centre de La Havane en 1845.Les 200 ouvriers rouleurs de l’usine Partagas, la plus grande production à l’exportation, tournent 5 millions de cigares par an.Il a été estimé qu’un havane fait main passe par pas moins de 222 différents stades du semis au produit fini avant d’être prêt pour la commercialisation. Les rouleurs de cigares travaillent dans de grandes salles Chaque rouleur est chargé de l’élaboration du cigare depuis l’étape de tassement jusqu’à ce qu’il soit finalement coupé à la bonne taille. La combinaison pré-mélangée de feuilles de remplissage et de sous cape est préparée à l’avance par chaque rouleur et est pressée dans des moules en bois de la taille appropriée. les rouleurs de cigares sont assis sur un banc, un peu comme les anciens bancs d’’école, et chaque rouleur commence avec un quota de remplissage adaptée à la taille et la marque de cigare qui est fait ce jour-là.Il y a 42 tailles de cigares faits à la main aujourd’hui et un bon fabricant de cigares peut généralement rouler environ 120 cigares de taille moyenne la moyenne pour un cigare de la taille Montecristo A est de seulement 56 cigares par jour.
Manufactured when all 126s were Polish made, Italian production ceased in 1979.
Plenty of these still on the go in Italy, generally in better condition than 500s.
Car: Triumph Spitfire 1500.
Year of manufacture: 1977.
Date of first registration in the UK: 1st August 1977.
Place of registration: Reading.
Date of last MOT: 15th August 2018.
Mileage at last MOT: 7,845.
Date of last change of keeper: 8th May 2021.
Number of previous keepers: 8.
Date taken: 9th April 2023.
Massive factory built in the 1880s. United Shirt & Collar Company ran its operations here until the 1940s. At the time, they were one of the largest shirt and collar manufacturing companies in the world. The building is currently being converted to house 151 apartments. Lansingburgh, New York.
Manufacture des Gobelins
Depuis 1662, année où Colbert décida de regrouper les ateliers parisiens en un même lieu, la Manufacture des Gobelins, célèbre dans le monde entier, n’a cessé de marquer de sa signature l’histoire de la tapisserie.
www.mobiliernational.culture.gouv.fr/fr/nous-connaitre/le...
OLYMPUS DIGITAL CAMERA
Phoenix, AZ
6/14/16
While in Arizona, I had the opportunity to visit the DaDee Manufacturing facility. I met Refuse Arizona the week before at Waste Expo and we were able to arrange a tour at the DaDee Manufacturing facility. On my way to their facility I saw The Scorpion FE Mack LR from Waste Expo pull into the Mack dealership in Phoenix, it was neat seeing that truck twice in one week in two different states. Once I arrived at DaDee Manufacturing Refuse Arizona gave me a tour that started at prefabrication and went all the way to final assembly. I had a great time learning more about the DaDee products and seeing them in person.
Big thank you to everyone at DaDee Manufacturing, they are truly an innovative company with products of the highest quality. And a special thank you to Refuse Arizona for the amazing tour, it was an honor meeting you and Waste Expo and talking about the Waste Industry.