View allAll Photos Tagged LED_Puck
This photo is a composite of 30 raw files. The lighting was two LED puck lights. I used a 10mm extension tube. The width of the bean group is approximately 1 inch in length.
This is my wife's geode she has had for many years. Her friend and former neighbor has the other half. These items are thousands of years old.
This is a composite photo of 8 files. Lighting was achieved by 2 LED puck lights.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
This was the first slot car I purchased with my own savings somewhere in the 1970s. My brother and I would spend untold hours racing HO scale slot cars in the basement. I called this one Eyes for obvious reasons.
This photo is a composite of 5 files. The lighting was by accomplished using 2 battery powered LED puck lights positioned on either side of the slot car.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
Yeah ! I was able to fix my lighting issue with these battery operated LED Puck Lights I found at Home Depot. It was not possible to wire the structure because of the knockdown construction.
This photo was taken with a 20mm Sigma f/1.8 lens, using 2 "under counter" LED puck lights for illumination of the rock - with 2 layers of 81A gel filter over the lights. These lights are pretty dim, but good for close subjects.
A more literal interpretation of this week's theme, I created the ice globe by freezing a water balloon. I made an indentation in the top for a candle with a small butane torch. To set up for the photo, I pushed a plastic container beneath the level of the snow and put a LED puck light in it to illuminate the ice globe from below. This had the additional effect of giving a cool blue glow to the bottom of the globe to contrast with the warm light of the candle. I was lucky to have a few brief moments without a breeze to get a photo with the candle burning.
This was kinda an experiment. I wanted to take a picture using only LED puck lights that I had bought at Harbor freight. These lights have a magnet on the back so I stuck them onto the rail of my garage door opener above me and then put two on either side of me, as well as two behind me. The effect wasn't bad considering these are pretty inexpensive lights. I fooled around in photoshop alot with this too.
Some sort of Amanita mushroom at twilight. I used a cheap, LED puck that I found in my desk drawer for the foreground lighting. Mushroom season is nearly upon us!
.
.
.
.
FUJIFILM X-T3, FUJIFILM XF 80mm f/2.8 R LM OIS WR Macro Lens.
.
Ambient background lighting, LED foreground augmentation
.
Jpg straight out of camera
Just having fun time experimenting with a little glass pyramid that I have. Placed it on my coffee table that has a mirrored table top. I used a led puck light and my TV tuned to no station which made the TV have a blue screen to highlight the pyramid. While the camera was exposing I shined a red laser through the pyramid at defferent angles to achieve the red highlights. I took multiple shots, changing the angles of the puck light and laser to get the different results.
LampsPlus.com sponsorship with MrsRuvi of Twitch.
Color-Changing LED Puck Light Kit by 360 Lighting
www.lampsplus.com/products/color-changing-led-puck-light-...
A Red-Lined Panopoda larva resting on a leaf. This was a lucky find- I was actually crawling around getting some shots of some small puffball mushrooms, and happened to spot it.
.
.
.
FUJIFILM X-T3, FUJIFILM Fujifilm XF 80mm f/2.8 R LM OIS WR Macro Lens
.
Light augmented by LED puck
.
Jpg straight out of camera
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
American Clay on walls (sulphur Springs), O Ecotextiles organic fabric on couch, Elemental LED puck and strip lighting, cork flooring
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
Two Philips LED capsules added to kitchen fluorescent plus an added LED puck under the cabinet.
www.homedepot.com/Electrical-Light-Bulbs-LED-Light-Bulbs/...
This fixture is now in the Lounge, replaced by a fixture with a Starlight LED T-8 tube replacement.
www.starlightsinc.com/shop/pc/viewPrd.asp?idproduct=38&am...
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
This is a gift I made for my partner, Patrick, on the seven-year anniversary of our first date. It's a papercraft model of our first kiss, at the Red Dragon in Minneapolis. Nothing in this model is painted or drawn--it's all cut paper. See if you can recognize any of the beer logos in the window of Hum's Liquors.
The model is lit from behind with LED puck lights.
Section showing shelving construction. Details of note: precision-located laser cut holes for attachment to blocking; concealed LED strip light behind top front lip of metal boxes; LED puck light integrated into wood display box.
Caliper Studio 2008
I was feeling ambitious today so I played around with light painting. I only really did 4 pictures this day and I liked this one the best because I am pretty recognizable in the shot. The thing about doing this sort of thing for a SP is that you have to do the painting part and then you have to spend a decent amount of time still with lights on you to appear in the picture. This was a 30 second exposure, and I believe it was around F8. I had two led puck lights one with a CTO gel on it, one bare. I also had a blinking blue LED on my wrist which is why there are random whisps of blue in the shot. I was also wearing my weird helmet because I had to fix the strap and I was just wearing it to see how it worked.
HLS LED-puckar lyser upp 750 m på Europas längsta gång- och cykelbro. Bron över Sölvesborgsviken. Fox Design har levererat mer än 300 HLS ledstångsbelysning. De är enkelsidigt monterade i brons över 750 meter långa räcke och fungerar som funktionsljus. LED-belysning, LED-downlight, LED-spotlight och inte minst ledstångsbelysning är några av våra specialiteter.
Just having fun time experimenting with a little glass pyramid that I have. Placed it on my coffee table that has a mirrored table top. I used a led puck light and my TV tuned to no station which made the TV have a blue screen to highlight the pyramid. While the camera was exposing I shined a red laser through the pyramid at different angles to achieve the red highlights. I took multiple shots, changing the angles of the puck light and laser to get the different results.
14 LED pucks from horsepower juice. Pucks are 4 SMD LED pucks.
4 up front (2 angled forward, 2 angled back
2 on each side on body ribs
1 behind the transfer case
3 in the rear (1 facing forward, 2 facing down).
two 6" LED (36 watt) LED bars from Trail Worthy Fab
14 LED pucks from horsepower juice. Pucks are 4 SMD LED pucks.
4 up front (2 angled forward, 2 angled back
2 on each side on body ribs
1 behind the transfer case
3 in the rear (1 facing forward, 2 facing down).
The two 5" 100 watt lights on the bumper are NOT on. They face out at an angle and blind the camera.
14 LED pucks from horsepower juice. Pucks are 4 SMD LED pucks.
4 up front (2 angled forward, 2 angled back
2 on each side on body ribs
1 behind the transfer case
3 in the rear (1 facing forward, 2 facing down).
HLS LED-puckar lyser upp 750 m på Europas längsta gång- och cykelbro. Bron över Sölvesborgsviken. Fox Design har levererat mer än 300 HLS ledstångsbelysning. De är enkelsidigt monterade i brons över 750 meter långa räcke och fungerar som funktionsljus. LED-belysning, LED-downlight, LED-spotlight och inte minst ledstångsbelysning är några av våra specialiteter.
14 LED pucks from horsepower juice. Pucks are 4 SMD LED pucks.
4 up front (2 angled forward, 2 angled back
2 on each side on body ribs
1 behind the transfer case
3 in the rear (1 facing forward, 2 facing down).
HLS LED-puckar lyser upp 750 m på Europas längsta gång- och cykelbro. Bron över Sölvesborgsviken. Fox Design har levererat mer än 300 HLS ledstångsbelysning. De är enkelsidigt monterade i brons över 750 meter långa räcke och fungerar som funktionsljus. LED-belysning, LED-downlight, LED-spotlight och inte minst ledstångsbelysning är några av våra specialiteter.
Shenzhen YJM Optoelectronic Co.,Ltd high power Led Ceiling Light/Led Downlight Product Details
1. Model Name: LED downlight
2. LED QTY: 5PCS
3. LED source: 1W High Power LED
4. Power Consumption: 5W
5. Input Voltage: 85-265V AC
6. Luminous Flux: ≥ 750lm
7. Brightness attenuation: 3%-5%1KH
8. Rendering Index(CRI): 65%-80%
9. Housing material and color: Aluminum alloy and silver
10. Demension: D170*85mm
Features of LED downlight
Wide range of available operating voltage and low consumption.
Environment-friendly and no UV or IR radiation
Easy to install and maintain, and normal base type E can be matched
Easy to install and maintain, replacement of traditional bulbs and no subsidiary fixture, such as ballasts and starters
Long lifespan, low cost of maintenance
Energy saving and high luminous intensity, energy consumption can be 30% of traditional bulbs
Anti-shake, convenient for transportation
Applications of LED downlight
1. As accessory light in show room
2. Meeting room, hotel, and cabine
3. Home, office, boat accent lighting
4. Surface or recessed lighting
Note:
When installation, try to avoid the minefields, strong magnetic field and high-pressure region
Ensuring a solid connection correctly in order to avoid short-circuit damage to components and trigger fires
Installed in a well-ventilated place to ensure appropriate environmental temperature
Using this product, please check the local voltage compliance product requirements
To prohibit the live wiring, check to confirm wiring is correct, check the no short-circuit, and then power
In case of failures, do not attempt to fix by yourself.
Why choose us?
We are the manufature -competive price but good qulity, and stability after-sale service!
Experienced technical staff, advanced equipment, experienced R&D department.
OEM/ODM accepted, clients' special requirement accepted
Large scale production lines, strong production capability
Unique design, No matter what product and solution you need, just email or call us. Our dedicated sales and tech support team will be happly to hear form you.
Warranty: 2 year.
Bild 2. Bro över dagvattenanläggning i Barkarbystaden. Här har Black Ljusdesign skapat ett mycket spännande ljus på bron med 64st rostfria HLS LED-puckar på 1,5W. Total effekt för att få ljus på hela bron är ca 110W.
I used LED puck lights in the upper upper cabinets I made. And I will be making glass doors to finish them off.
Just having fun time experimenting with a little glass pyramid that I have. Placed it on my coffee table that has a mirrored table top. I used a led puck light and my TV tuned to no station which made the TV have a blue screen to highlight the pyramid. While the camera was exposing I shined a red laser through the pyramid at defferent angles to achieve the red highlights. I took multiple shots, changing the angles of the puck light and laser to get the different results.