...which was published upon the first release of Hasegawa's 1:72 VF-1 model kit in Fighter mode; the magazine came with a give-away decal sheet for half a dozen IMHO non-canoncial Valkyries, including markings for a commemorative scheme for the 2.500th production VF-1.

under the overpass

Artwork with added Doomsday Logo

Cheers!

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

At a recent concert for Jem and the Holograms' Pretty in Pink World Tour, the paparazzi set forth a media blitz for the sugary Pop princess and her entourage, which included: the Holograms, Rio, Anthony Julian, Video Montgomery, Danse, Astral, Régine...and a mysterious face that appeared in the distance. The fans roared in utter hysteria and the high-tech cameras flickered in unison as photographers, fashion designers and Hollywood reporters gathered side by side in the concert hall to get a word or two from the superstar musicians. Jem was accosted by twenty different photogs who began asking twenty different questions, chief among them: “WHO'S THAT GIRL”? Then one handsomely Black, tall photographer zeroed in on the mysterious figure and asked her name. The artist slowly turned her head to the camera in a sly manner, blew a kiss and said one word...“Graphix!” Many people have never seen or heard of this Cali native and that's because she has laid low...until now! Three things are for sure about this wealthy valley girl. One, she's an amazing graffiti artist. Two, her taste for wild fashions. And last, her famous tag on all the elaborate artwork that she's created for countless singing groups and solo acts! A gifted artist with an eye for up-to-the-minute trends in art and fashion, Graphix lives for creating award-winning album covers and caters to each of her favorite Pop/Rock/R&B bands, particularly Jem and the Holograms! Her breathtaking designs for their latest concert, in South Africa, garnered her several international awards abroad. She's also a giving soul and enjoys helping in any way she can, for example, her collaboration with Danse Dvorak on some outrageous art designs for Haven House's 4th Annual Special Benefit. Another unknown fact about this tanned beauty is that she had experienced great success very early in her career, when she conceived and designed the front cover for Missing Persons 1982 New Wave album! Time has passed (seven years to be exact) and she's kept up with what's in, designing concert posters, album covers and merchandise for a slew of acts, like Sean Harrison, Johnny Deacon, Lena Lerner, the Blue Bloods, the Leatherettes, Taps Tucker's comeback album, Nefertiti Nikki, Kimber and Stormer's sophomore album, the Space Cadets, the Fifth Avenue Boys, New Edition, the Downtown Boyz, the Limp Lizards and the Stingers! In fact, it was Ms. Lena Lerner who enlisted her to design her lavish “Who’s Zoomin’ Who?” world tour, in late '86. And boy, oh boy, did she go all out for that particular assignment. She literally lit the stadium's walls with cutting-edge art that glowed in the dark! Ohhh, and how could her associates and fans forget the mega concert she styled and designed for Luna Dark, in late '87?! Luna was billed with musicians Samantha Fox and Jody Watley for their “Exotic Escapades” world tour, and all three musicians were in debt to Graphix for her impeccable work! She even designed a line of leather and lace embroidery bottle-holders for Luna’s perfume line, “Lush.” Few have met her and immediately pegged her as a snooty, well-to-do snob, even the Misfits who have been known for trashing her good name over creative differences and copyright issues. And though Graphix exudes a good-natured, kind soul, she will not hesitate to set someone straight or strike back, which is exactly what she did one Summer evening, in 1987, at Misfits Headquarters, when Pizzazz started an argument with her over a single can of Aqua Net hairspray! The talented artist couldn't help but laugh uncontrollably at the site of Pizzi’s flat hairdo, and admitted how much it resembled a chunk of cotton candy. It was then that WWIII broke loose. As the screaming grew, the thudding multiplied, eventually leaving Pizzazz picking all her expensive makeup, lashes, designer heels and some outfits from out of the tub Gwen filled with bleach! She then planted the cranky rocker on her derrière as she began to sashay to the elevator, never to be seen again by the Misfits. So it’s quite understandable that she would grow exhaustingly annoyed when it comes to setting the record straight on whether or not she's a Misfit. And you better believe that nothing brings her more joy than incinerating those who assume they KNOW her, because she belongs to NO ONE, and is her OWN boss! At this point, it's probably a good idea for the Misfits and the Stingers to steer clear, for they have met their match, and she's one helluva force to be reckoned with!

First and foremost, I would like to express my appreciation to Integrity's Design Team for their creation of Graphix! I am extremely grateful to ALL involved, and I am totally over the moon for this doll! To be completely honest, I wasn't sure if they were going to create her at all. It was clear from the start that even so much as a notion from Integrity Toys for Graphix would require an abundance of optimism and hope. Guess it all paid off in the end because here she lies in her box draped in her signature (prototype) outfit, eagerly awaiting to strike a pose alongside her friends and foes! One might ask, “Why do Jem fans care about a doll that never existed in the first place?!” Aaah! Such a typical question with an extremely simple answer. You see, technically, Graphix DID EXIST! She has a brief bio and actually advanced to the prototype stage, both of which were created in 1988. The fact that she happens to be the only character in the entire Jem Bible who never made it to the show is all well and true, but, nevertheless, she's in the Jem Bible! I think most Jem fans feel that because of her absence from the show that she's unimportant. Some may even consider her to be a flash in the pan, but such an attitude will never change the fact that she was once conceived, written and named simultaneously! Her moniker and background bio has remained in our hearts and minds for several years now. So the arrival of this W Club Exclusive is indeed a celebratory moment for a vast majority of Jem fans everywhere! Now, as I'm sure we all know, this is the last year of Jem and it feels like the end of yet another era. Integrity Toys' Jem has accomplished more in this decade than ever expected! She (counterparts included) has sold better than she did in the ‘80s, and she's also surpassed the third year mark that her show reached in its heyday! Integrity's Jem has even had more staying power than the 2015 film itself, of course. In my opinion, Jem has conquered her revival in the new century, and boy did she come strutting through with a vengeance!

As of this moment, though, it's all about Gwenny-Gwen! The aesthetic was taken into high consideration for this doll. If you take a minute to examine her you'll notice the dedication put forth to create a more modern resemblance from her ‘80s prototype doll. I mean, it's all there but with a slight twist! The second I removed the lid to her box I noticed her tan skin. My attention was then directed at her hair color, which blends flawlessly with her Hungarian skin tone! One thing I must confess is my discontent with the color spots in her hair. I just wish that we were given the option to somehow apply the colorful spots (or streaks) ourselves. Yet and still, that doesn't take anything away from the golden blond color that Integrity created! She's definitely an Orange County girl through and through! Integrity made sure to stay true to what little details they had for her makeup, especially with the art designs on both sides of her face: blue and yellow zigzag shapes on her left cheek, and several small black and white squares alongside the right side of her eye. The full appearance of her face, again, matches perfectly with her original prototype creation, her cool blue eyebrows included! Graphix is a professional illustrator; a colorist, and excels at drawing/designing, so it would come as a huge surprise if she didn't have the raw talent to create wonders with her makeup! The evidence of her artistic capabilities shows, starting with a wash of yellow eyeshadow, in “Preppy Professional”, all over her eyelids and on both brow bones. She remained somewhat consistent with the colors, slightly switching gears to her burnt sienna eyeshadow, in “Loco-Motion”, and creating a thin, sharp wing in the creases of her eyelids, then lining her lids with black “Rag Doll” eyeliner, and brightening the bottom lash lines with her blue “Orinoco Flow” eye pencil! There are many characters who I've inducted into my personal Hall of Fame for winged-out eyeliner (Jem, Kimber, Régine, Clash, Rapture, Pizzazz, Stormer and Jetta) and Graphix is top queen! Minx has been appointed runner-up lol! Gwen loves to plant a smooch on her autograph pictures after signing them, and when she does, her lips are usually painted with red “Kiss Me Deadly” lipstick. And her fingernails are often finished with red hot “Pyromania” nail polish! Ok! Now, where must I start regarding her outfit?! The Design Team definitely went with a more suitable approach compared to her ‘88 doll, and I greatly appreciate it! Didn't she wear shiny vinyl-like material for that photoshoot?...LOL! I have always had a feeling that there's a deeper backstory regarding the idea and style for her outfit, but I wouldn't know for sure. Anyway, it's elaborate, yet peculiar...busy...loud...and I LOVE IT! Gotta admit that the new material is delicate to the touch. It stretches and separates the design prints on the shirt and pants, both of which are dipped in a pool of multi-colored zigzags, triangles and long rectangles—I know, I know, it's a mind-scrambler! And you can't tell her that she's not blazing in her red, snake-skinned mini skirt with a side slit! Well, maybe Aja has something to say about it! I love her red hoop earrings and bracelets, too! With Graphix, it's really all about the color red, and that's why I get such a thrill when gazing at her in my cabinet. The Design Team never fails when it comes to the heels and boots for this particular collection. This is also true with Graphix's tall heel-boots! They are gorgeous and a tad easier to apply than Minx's, but as equally smooth and fitting as Bad Kimber's! Her fire engine, red-colored designer heel-boots are the latest news in Jem world as they set her apart from the pack and look highly unique! I also love her matching red portfolio with her name in black and white shapes on the front! Before viewing her product pictures, I wasn't sure what Integrity had planned for her main accessories. I just knew that a video distorter was out of the question lol. However, I have always envision at least one can of spray paint, and here we have three different colors: green, pink and orange! Graphix doesn't mind providing samples of her artwork and she's brought along a few to share. And that pretty much sums up the Integrity Toys W Club Exclusive on Ms. Snyder. The shock and reality of this doll is all too real. What a joy and relief to finally have her!

Graphix now exists! This talented artist stands under a spotlight that burns bright. She's business savvy, self-sufficient, a bit of a nonconformist, totally underrated and overdue! Gwendolyn “Graphix” Snyder is a monarch, dammit! 👸

For those who never saw the Visual Graphix releases from the 90`s....You can watch vol.2,4 & 5 here...Be sure to check the Brighton sections...

Vol.2 - www.youtube.com/watch?v=aQmto0PqB68

Vol.4 - www.youtube.com/watch?v=pPbVrQAhETo

Vol.5 - www.youtube.com/watch?v=0sOo_wgX1oA

Artwork with added Doomsday Logo

My 2022 screen printed, Doomsday Graphix two colour shirts. Black shirt. A3 print (white and Grey). Message me if you want one. Priced at cost. Dark, Gothic, Horror, Dystopian and Twisted Fairy-tales by Doomsday Graphix.

MODELING GRAPHIX

NOT TWEEKED, btw.

Uptown

Art by Sherrie Thai of Shaireproductions.com

Taken: NJ, USA.

25" x 35" cm (File), commerical work .

- prints coming soon

Cig butt alert! Mission St., San Francisco

on the Trans-Siberian Express

From an early afternoon at Mepkin Abbey, a Trappist monastery near Moncks Coner, SC, USA...

I almost wore my sequined mini-skirt to the conference. UCSF Mission Bay, San Francisco.

Artwork with added Doomsday Logo

New two colour Idol Fools T shirt. by Doomsday Graphix

Idol Fools, band and urban clothing brand.

what I said

A very kind guy named Jacob came by the other day and grabbed on of my seats for his rat style FXR Bobber..

Custom Regines. One is to represent the prototype and the other to represent the cartoon version which is amazingly made from a Rock n Curl Jem with skin color changed and a Darci body

Alone again, naturally

Graphics by Sherrie Thai of Shaireproductions.com

LIKE on Facebook

Coney Island

I have that same outfit. (I do!) 14th & Church, San Francisco.

Art by Sherrie Thai of Shaireproductions.com

Coney Island

Claes Oldenberg at the Pennsylvania Academy of the Fine Arts, Philadelphia.

www.pafa.org/About/Lenfest-Plaza/Oldenburg-s-Paint-Torch/...

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

www.ym-graphix.com/

www.toybotstudios.com

The street, San Francisco

Some background:

The VF-1 was developed by Stonewell/Bellcom/Shinnakasu for the U.N. Spacy by using alien Overtechnology obtained from the SDF-1 Macross alien spaceship. Its production was preceded by an aerodynamic proving version of its airframe, the VF-X. Unlike all later VF vehicles, the VF-X was strictly a jet aircraft, built to demonstrate that a jet fighter with the features necessary to convert to Battroid mode was aerodynamically feasible. After the VF-X's testing was finished, an advanced concept atmospheric-only prototype, the VF-0 Phoenix, was flight-tested from 2005 to 2007 and briefly served as an active-duty fighter from 2007 to the VF-1's rollout in late 2008, while the bugs were being worked out of the fully functional VF-1 prototype (the VF-X-1).

Despite its relatively short and intense production run the fighter remained active in many second line units and continued to show its worthiness even years later, e. g. through Milia Jenius who would use her old VF-1 fighter in defense of the colonization fleet - 35 years after the type's service introduction!

General characteristics:

All-environment variable fighter and tactical combat Battroid,

used by U.N. Spacy, U.N. Navy, U.N. Space Air Force and U.N.S. Marine Corps

Accommodation:

Pilot only in Marty & Beck Mk-7 zero/zero ejection seat

Dimensions:

Fighter Mode:

Length 14.23 meters

Wingspan 14.78 meters (at 20° minimum sweep)

Height 3.84 meters

Battroid Mode:

Height 12.68 meters

Width 7.3 meters

Length 4.0 meters

Empty weight: 13.25 metric tons

Standard T-O mass: 18.5 metric tons

MTOW: 37.0 metric tons

Power Plant:

2x Shinnakasu Heavy Industry/P&W/Roice FF-2001 thermonuclear reaction turbine engines, output 650 MW each, rated at 11,500 kg in standard or 225.63 kN in overboost

4x Shinnakasu Heavy Industry NBS-1 high-thrust vernier thrusters (1 x counter reverse vernier thruster nozzle mounted on the side of each leg nacelle/air intake, 1 x wing thruster roll control system on each wingtip)

18x P&W LHP04 low-thrust vernier thrusters beneath multipurpose hook/handles

Performance:

Battroid Mode: maximum walking speed 160 km/h

Fighter Mode: at 10,000 m Mach 2.71; at 30,000+ m Mach 3.87

g limit: in space +7

Thrust-to-weight ratio: empty 3.47; standard T-O 2.49; maximum T-O 1.24

Design Features:

3-mode variable transformation; variable geometry wing; vertical take-off and landing; control-configurable vehicle; single-axis thrust vectoring; three "magic hand" manipulators for maintenance use; retractable canopy shield for Battroid mode and atmospheric reentry; option of GBP-1S system, atmospheric-escape booster, or FAST Pack system

Transformation:

Standard time from Fighter to Battroid (automated): under 5 sec.

Min. time from Fighter to Battroid (manual): 0.9 sec.

Armament:

2x Mauler RÖV-20 anti-aircraft laser cannon, firing 6,000 ppm

1x Howard GU-11 55 mm three-barrel Gatling gun pod with 200 RPG, fired at 1,200 rpm

4x underwing hard points for a wide variety of ordnance, including…

12x AMM-1 hybrid guided multipurpose missiles (3/point), or

12x MK-82 LDGB conventional bombs (3/point), or

6x RMS-1 large anti-ship reaction missiles (2/outboard point, 1/inboard point), or

4x UUM-7 micro-missile pods (1/point) each carrying 15 x Bifors HMM-01 micro-missiles,

or a combination of above load-outs

The kit and its assembly:

Another small and vintage 1:100 VF-1 Fighter. This time it’s a non-canonical aircraft, based on a limited edition decal sheet that was published with the Japanese Model Graphix magazine in April 2001 (check this here for reference: www.starshipmodeler.com/mecha/jl_clrvalk.htm) with Hasegawa’s first release of their 1:72 Valkyrie Fighter kit. The give-away sheet featured several VF-1s, including an anniversary paint scheme for the 2.500th production Valkyrie. This is AFAIK neither ‘official’ nor canonical – but the pretty blue-and-white livery caught my attention, and I had for a long time the plan to re-create this livery on one of my favored 1:100 models. This would not work 100%, though, so I had to improvise – see below.

The kit was built OOB, with the landing gear down and (after taking the flight scenic pictures) with an open canopy, mounted on a small lift arm. Some typical small blade antennae the 1:100 simple kit lacks were added around the hull as a standard measure to improve the look. In the cockpit I added side consoles and a pilot figure for the in-flight shots.

The only non-standard additions are the IRST sensor fairing in front of the cockpit – the model of the anniversary VF-1 in the Model Graphix magazine carries this canonical upgrade, too, it was created from clear sprue material. Another tiny addition were the RHAWS antenna fairings at the top of the fins, scratched from small styrene profile bits.

The Valkyrie’s ordnance is standard and was taken OOB, featuring twelve AMM-1 missiles under the wings plus the standard GU-11 gatling gun pod; the latter was modified to hold a scratched wire display for in-flight pictures at its rear end. The Model Graphix VF-1 is insofar confusing as it seems to carry something that looks like a white ACMI pod on a non-standard pylon, rather attached to the legs than to the wings? That's odd and I could not make up a useful function, so I rejected this detail. The magazine Valkyrie's belly drop tank was - even though canonical, AFAIK - also not taken over to my later in-service status.

Painting and markings:

The more challenging part of the build, in two ways. First, re-creating the original commemorative livery would have called for home-made decals printed in opaque white for the manufacturers’ logos, something I was not able to do at home. So, I had to interpret the livery in a different way and decided to spin the aircraft’s story further: what would become of this VF-1 after its roll-out and PR event? In a war situation it would certainly be delivered quickly to a frontline unit, and since I had some proper markings left over, I decided to attach this colorful bird to the famous Skull Squadron, SVF-1, yet to a less glorious Flight. Since flight leaders and aces in the Macross universe would frequently fly VF-1s in individual non-standard liveries, sometimes even very bright ones, the 2,500th VF-1 could have well retained its catchy paint scheme.

The second part of the challenge: the actual paint job. Again, no suitable decals were at hand, so I had to re-create everything from scratch. The VF-1J kit I used thankfully came molded in white styrene, so that the front half of the aircraft could be easily painted in white, with no darker/colored plastic shining through. I painted the white (Revell 301, a very pure white) with a brush first. For the blue rear half, I settled upon an intense and deep cobalt blue tone (ModelMaster 2012). For the zigzag border between the colors, I used Tamiya masking tape, trimmed with a tailor’s zigzag scissors and applied in a slightly overlapping pattern for an irregular edge.

The landing gear became standard all-white (Revell 301, too), with bright red edges (Humbrol 174) on the covers. Antenna fairings were painted with radome tan (Humbrol 7) as small color highlights.

The cockpit interior became standard medium grey (Revell 47) with a black ejection seat with brown cushions (Humbrol 119 and Revell 84), and brown “black boxes” behind the headrest. The air intakes as well as the interior of the VG wings were painted dark grey (Revell 77). The jet nozzles/feet were internally painted with Humbrol 27003 (Steel Metallizer) and with Revell 91 on the outside, and they were later thoroughly treated with graphite to give them a burnt/worn look.

The GU-11 pod became standard bare metal (Revell 91, Iron metallic), the AMM-1s were painted in light grey (Humbrol 127) with many additional painted details in five additional colors, quite a tedious task when repeated twelve times...

After basic painting was one the model received a careful overall washing with black ink to emphasize the engraved panel lines, and light post-shading was done to the blue areas to emphasize single panels.

The full-color ’kite’ roundels came from an 1:100 VF-1A sheet, the skull emblems were left over from my Kotobukiya 1:72 VF-4 build some years ago, which OOB carries SVF-1 markings, too. The 2.500th aircraft nose art decoration was printed on clear decal film with an ink jet printer at home, even though it’s so small that no details can be discerned on the model. SVF-1’s “ML” tail code was created with single white decal letters (RAF WWII font), the red “555” modex came from an PrintScale A-26 Invader sheet, it's part of a USAF serial number from an all-black Korean War era aircraft.

The wings' leading edges were finished in medium grey, done with decal sheet material. The Model Graphix Valkyrie does not sport this detail, but I think that the VF-1 looks better with them and more realistic. Red warning stripes around the legs - also not seen on the model in the magazine - were made from similar material.

The confetti along the jagged edge between the white and the blue areas was created with decal material, too – every bit was cut out and put into place one for one… To match the cobalt blue tone, the respective enamel paint was applied on clear decal sheet material and cut into small bits. For the white and red confetti, generic decal sheet material was used. All in all, this was another tedious process, but, at the small 1:100 scale, masks or tape would have been much more complex and less successful with the brushes I use for painting. For this home-made approach the result looks quite good!

Finally, after some typical details and position lights had been added with clear paints over a silver base, the small VF-1 was sealed with a coat of semi-matt acrylic varnish, giving it a slightly shiny finish.

A pretty VF-1 – even though I’d call it purely fictional, despite being based on material that was published in a Japanese magazine more than 20 years ago. The simple yet striking livery was a bit tricky to create, but the result, with the additional SVF-1 unit markings, looks good and makes me wonder how this machine would look with FAST pack elements for use in space or as a transformed Battroid?

2023 Gig Posters by Doomsday Graphix. Meth Leppard. Misanthropic Noise. Organ Dealer. Hallucination Realized, Durian. Brooklyn NYC.

Poster for Ralph and Haunted Hotel Records. #punk #deathmetal #doommetal #underground #undergroundmusic #amebix #boltthrower #carcass #extrememetal #undergroundmetal #hauntedhotel #brooklynusa @methleppardgrindcore @organdealer @hallucinationrealized @saintvitusbar #brooklynnyc @durian_grind

Daan Bantayan Beach north of Cebu, Philippines

but this life thing is pretty damn boring so far. Fort Mason, San Francisco.