View allAll Photos Tagged Fasteners.
Pry out rear panel fastener. Locate plastic press-in fastener attached to inside of panel and pry it free from body with interior trim tool.
Southwest Fastener is honored and thrilled these ASU Students; Connor Birkhold, Ash Haq, Brandon Ralston, and Gillion Tervet have chosen our company to do their spin category project for their Research and Negotiation class at #ASU.
The #Bolt-Heads are excited to see their results and recommendations for the future.
Southwest Fastener supplied the Stainless Steel Anchors & hardware, Unistrut, and Channel Fittings for the New Arizona State University Dorms Bath Partitions installed by Delaney & Brown. #ASUDorms #BoltHeads
Beloved Aurora is fully deboxed, and is posed free standing. Once the right balance is achieved, she is fairly stable. Her simple and symmetrical dress made it much more easy to balance on her shoes than the Coronation Aurora doll, who had a heavy train on her dress. Photographed in daylight.
Review of Beloved Aurora Doll
Both Beloved and Royal Coronation Aurora dolls have identical faces. Her face is pretty, but bland and generic. She only has a passing resemblance to the movie character, as portrayed by Elle Fanning. She doesn't have very realistic features, but looks like an ordinary doll painted to look like an animated character. She has a light complexion, small blue green eyes gazing straight ahead, brown eyebrows, small straight nose, light pink lips on a small mouth, large chin, and light rouge on her cheeks.
Her hair out of the box is much neater than Coronation Aurora's hair. Like the other doll, she has a long side curl down the left side of her head. It is bit stiff from hair product, and is a much tighter curl than the one on Coronation Aurora. There is also some hair product in the side bangs right over her forehead. The rest of her hair is loose and gently wavy down the her back to her hips, and is soft and smooth. Her hair is thinly rooted hair over most of her head, so a bald spot is visible right behind her side bangs. Also bald spots are easily visible if her hair is moved around on the top of her head. It would help if she had some hair ornaments or headdress to help hide the bald spots.
Her outfit is very simple. It is a full length one piece dress, made of light blue satin, with gold glitter decoration, white organza trim at the collar, flared full length sleeves, and a plastic belt around her waist with a hanging piece down the front of her dress. The satin is shiny and very smooth, and the glitter does not shed at all. In addition to the gold glitter, there is also printed flowers in the hem of the dress. She is wearing the same style high heeled shoes as Coronation Aurora, but these are light blue in color instead of tan.
Packaging and Deboxing
Deboxing the Beloved Aurora Doll by Tollytots/Jakks Pacific was more difficult than for the Coronation Aurora doll. In order to remove the front plastic cover from the box, it was necessary to almost tear the back of the box apart, as the two layers of the backing were taped and glued shut. The tabs of the plastic cover were also taped and glued to the inside of the backing. The box would need a lot of tape to put it back together securely, if it were to be reused for storing or displaying the doll in the box. And the tearing apart of the backing of course creased and weakened the cardboard.
Aurora is standing on a small cardboard spacer. Behind her is a printed background from the movie, which is common to all the dolls in this series. Unfortunately, the bottom of the backing was not square to the back side, so the doll would fall face forward if I tried to stand her up in the backing.
Removing her from the backing was very easy, especially compared to most Disney Store dolls. There was only plastic T-tab fasteners securing her to the backing and the plastic spacer. It was possible to reach all the fasteners and snip them off, without having to remove the large plastic spacer, including the one through the back of her head. The remaining post sticking out of her head was snipped off as close to her scalp as possible, without cutting her hair. Unlike Coronation Aurora, there was no tissue paper around her legs.
Purchase Details
I just received the four available Jakks Pacific dolls from the Maleficent movie in single doll packages. I ordered them from Toys R Us on Friday night and got them Tuesday, with free shipping. I appreciated the quick shipping, compared to the Disney Store. The dolls are the following, with links to the TRU site. All the dolls are 12'' H. The Coronation dolls are $39.95 each, the other two are $19.95. They are also available in some ToysRUs stores. The cheaper dolls are also available online, for the same price, from Amazon.
This one is located at the top of the side panel where it meets the head liner. Work interior tool under panel to locate the press-in fastener.
Southwest Fastener supplied the Stainless Steel Anchors & hardware, Unistrut, and Channel Fittings for the New Arizona State University Dorms Bath Partitions installed by Delaney & Brown. #ASUDorms #BoltHeads
The #Bolt-Heads celebrated Paul McConnell's Birthday Today. Paul is the Purchasing Manager at Southwest Fastener. Happy belated Birthday Paul! #BoltHeads
The Southwest Fastener Bolt-Heads are reaching out to faraway lands. We just sent our 1st Bolt-Head overseas to a customer in Australia. Safe travels, hooroo!
Southwest Fastener celebrated June Bolt-Head Birthdays Today. Happy Birthday to David, Pete, and Vanessal! #BoltHeads #HappyBirthday
Password:JDM Quick Release Fasteners are ideal for front bumpers, rear bumpers, and trunk / hatch lids, that you need to remove frequently, or remove and reinstall quickly, such as in the pits. Our quick release fasteners are for off road use only. Our fasteners are precision machined from billet aluminum, and have a black anodized finish. Includes stainless steel hardware. Includes 4 x Aluminum Fasteners, 4 x Stainless Bolts, 4 x Nuts, 4 x washers, and 2 x O-Ring Fasteners.
Summary of Refit 2009/2010
- Vessel was totally stripped, re-fared, & painted
- Teak decks were replaced and fastened with adhesive compounds (no fasteners)
- The spars were refinished and all hardware was replaced & refastened. At the same time the standing rigging and running rigging was completely replaced new. Low friction "Strong Tracks" were added to both masts.
- New custom sales done by Carol Hasse of Port Townsend Sailmakers. The new sail inventory is a Full Batten Main, Full Batten Mizzen, Genoa & Cruising Spinnaker
- Vessel was completely re-wired 12V & 110V systems
- The hull was insulated with light, fire resistant aeronautical insulation before reinstalling the interior
- The interior millwork completely redone to a high marine standard with teak & birds eye maple
- Through hulls were pulled tested, serviced and reinstalled
- Cabin windows were replace with new custom windows and frames
- Lifelines replaced new
- English Connelly leather upholstery was fitted/installed
- The propane stove, aft cabin heater/fireplace & all propane systems installed new
- Electronics upgraded with new units
Engine & Mechanical
- Engine is a FWC Perkins 4236 85hp diesel which was rebuilt in 1996
- Both fuel tanks were replaced in 2005 with total estimated fuel of 200gal.
- Prop is a Bronze Three Blade 18x10
The Southwest Fastener Bolt-Heads were glad to sponsor a hole at the Amigos - Arizona Mining and Industry Get Our Support Fall Copper Classic Tournament held today, Sept. 6 at JW Marriott Starr Pass Resort & Spa. #givingback
Southwest Fastener supplied the Stainless Steel Anchors & hardware, Unistrut, and Channel Fittings for the New Arizona State University Dorms Bath Partitions installed by Delaney & Brown. #ASUDorms #BoltHeads
Note to self: Always plan to replace fasteners on cars that you let out of your sight, not even talking about cars you bought used or let the dealership fix
The Southwest Fastener Bolt-Heads were glad to sponsor a hole at the Amigos - Arizona Mining and Industry Get Our Support Fall Copper Classic Tournament held today, Sept. 6 at JW Marriott Starr Pass Resort & Spa. #givingback
Oops, I can see the ends of the elastic cord! Oh well...this might be the perfect fastener EVER! All materials came from Walmart and as luck would have it, the buttons are perfect for the Canopy Cardigan. I may make a couple more to close it up a little more.
This fastener was made following the instructions in Everyday Crochet by Doris Chan using 2 shank buttons, 1mm elastic beading cord, and E beads.
I might just forgo buttons on a lot of garments in favor of these fasteners that are interchangeable with whatever mood strikes.
Southwest Fastener supplied the Stainless Steel Anchors & hardware, Unistrut, and Channel Fittings for the New Arizona State University Dorms Bath Partitions installed by Delaney & Brown. #ASUDorms #BoltHeads
The 2nd load of #fasteners for the Schuff Steel #Solar Project in Boulder City Nevada was shipped out today. Within the shipment of specially #coated fasteners included ¾-10 x 2 Flange #bolts, Lock #nuts and #washers, which was achieved with the support and cooperation of our fine manufactures.
Juan Sanchez of Lawson Products conducted Fastener Safety Workshop on Oct. 29, 2008 at the Richmond Fire Department in Richmond, R.I.
Meet the Southwest Fastener Bolt-Head Team! Josh Le Brecque is an Inside Sales Team Member at Southwest Fastener. Josh's work days are filled with taking care of the customer's needs from orders and quotes to researching and problem solving all of which are done in a timely fashion to make sure customers keep coming back. Like Josh says without customers there is no Southwest Fastener.
Josh has a wealth of knowledge and experience within the Fastener Industry, having been in the Industry for 16 years now. His knowledge and experience stem from having held various positions within the company. Starting in the Warehouse, then moving to Will Call, to managing a satellite store, and then finally to Inside Sales.
Josh has a large sense of pride in his work and he enjoys dealing with the customers and helping them get their jobs completed on time.
Hockey Stick Skichair $499.95 ea
For the Ottoman add $ 99.95 ea
If you Play in Style, Rest in Style!
On the Deck, by the water, or in the Ski lodge this gorgeous recycled Adirandack Chair is the place to relax after a hard day of thrashin. Order today.
Hand Made Skichairs, complete with matching ottoman, are the finest Adirondack style chairs available. Skichairs are 100% handmade in the USA by a Skichair artisan with fivequarter inch Port Orford Cedar, the finest most durable material for outdoor use, and assembled with stainless steel fasteners. Skichairs have a curved back for maximum comfort and extra long arms to accommodate not 1, but 2 drinks per arm!
Skichair products reflect the passion and lifestyle outdoor enthusiasts in their relaxation!
100% Comfort Fit Guarantee
Also, please feel free to send us your old sticks to make a custom Hockey Chair for you.
Product care and information:
Natural Cedar is a creamy white color that blends with any dcor.
Naturally resistant to rot and insect damage.
Skichairs do not have to be treated if left outside.
All Cedar weathers gracefully to a silvery grey patina when left untreated!
Cedar may be preserved by adding a sealer that has a UV inhibitor.
Sealer can be purchase at most hardware stores and applied by spraying.
May be stained to match dcor with most exterior wood sealants.
Skichairs are shipped partially assembled and should be glued together when assembled.
All Products shipped UPS ground in ReCycled bicycle boxes
Handmade in the USA!
A note about Adirondack Furniture...
All wooden outdoor furniture is subject to the natural process of checking. The process adds to the natural beauty and character of this fine furniture. Checking happens as wood releases moisture, and normally occurs across or through annual growth rings. Checking is one of the special characteristics of cedar furniture and does not affect the structural performance or integrity of the wood.
Size: Height 40, Length 38, Width 33, Seat Height 15. Ottoman: Height 15, Length 24, Width 19. Total weight of chair and ottoman: 55lbs.
Southwest Fastener holds together the University of Phoenix Stadium home to the NFL's Arizona Cardinals.
Replaced the socket bolts with standard grade 8 hardware with antiseize paste. Lower counter sunk socket bolts were cleaned and coated with anti seize. We had problems with 2 out of the 12 lower socket bolts.
driver Mark Barnes
co driver Sophie Louise Buckland
i #intasprint.
#intasprint_fasteners.
#mark_barnes.
#ricambio_fia5922. #abarth. #abarth-500.
#abarth-r3t.
#rally.
Williams Fasteners, was founded in 1870 by the Williams brothers, and was based at Green Lane in Shalesmoor in Sheffield until 1997. The company then relocated to the outskirts of Sheffield near the M1 to make distribution easier. It’s really nice to see it didn’t shut down.
It is this original site that is currently available to exploration. However the place, with its nooks and crannies, has been purchased for redevelopment and so will probably see workmen starting soon and all the cubbies will be ripped out.
One has to wonder if Mr Williams was some kind of obsessive compulsive, everything in its place - kind of a dude. I can just picture him wandering around – not a nut or bolt out place! I’ve never seen so many cupboards in my life!! I found a fair amount of rotting Paperwork
I loved this explore. We got disorientated inside and a bit lost in the dark amongst the cuboards. It has the feel of an old family business, lots of cool health and safety posters from the 80s proffering good advice.
In 2005 the company changed hands and for the first time the Williams family were no longer a part of the management of this local Sheffield business.