Theme challenge for "Looking close... on Friday!" #ORANGE

An #Orange propeller from my Quad Copter, an FPV Racer.

These propellers is made of plastic and replaced quite often like consumables because it breaks easily.

That is because the very small motors below them turns them at around 25000 RPM. The Quad has 4 of these to fly with.

This specific one is a FPV racer Quad Copter.

Using the Nikon Nikkor AF-P 18-55mm f/3.5-5.6 G VR DX (kit) lens.

Photo taken at Randfontein in South Africa.

I Shoot Raw.

I edit in GIMP.

Feel free to criticize or just comment.

I'm starting a drone racing team at school. Here is 3 inches of my new drone.

Solide et efficace ce quadcopter baptisé Colibri 160 a été designé et fabriqué par mon fils Tom avec une imprimante 3D.

Suite à cela il a mis un tutoriel en ligne pour ceux que cela intéresse ou qui ont envie d'en faire autant.

www.instructables.com/id/How-to-Design-and-3D-Print-Your-...

DSC09251

I frankly hesitated, stepping up from the DJI Phantom 2 to the DJI Inspire One. Biggest reason for my hesitancy was that I felt I had a workable system with the DJI Phantom 2, though it had its quirks. I wasn't sure if the extra investment would be 'worth it' for the newer system. Chief among them being, the lack of integration between the Quad and the Go Pro.

Even though there is a remote control with the Go Pro Black Edition that I was flying, it shares a radio signal adjacent with the control interface of the quad. Using the wifi remote, could end in peril. For stills, putting the Go Pro into Time Lapse, interfered with the FPV feed. So, I'd generally record 4k video and carve out still frames later. It worked well enough for most purposes..

One of the biggest Pros that i'm experiencing with the Inspire One is that camera control via a Mobile device on the ground makes a huge difference. Being able to switch between video and photo mode, control exposure and bracketing and shoot RAW were all some great touches to the overall Inspire package. It is ridiculously stable - even more so than my DJI Phantom 2 was and super easy to fly.

The only surprising drawback I'm experiencing with the Inspire One is that the FPV feed doesn't appear to extend to the full advertised 2 km control range of the radio and the FPV video feed can be jerky with high latency at distances over 500m. I won't be FPV racing an Inspire One anytime soon but these are all minor setbacks in what I'm finding is an otherwise perfect aerial photography tool.

Some FPV racing in the Knapper deep forest, ending at the magnificent lake Møsvatn on a perfect late summer afternoon - south Norway

Just a photo of a night race with "The Other Guys", a MultiGP FPV Racing chapter I am a member of

STAR POWER FPV Racing Drone Quaducopter SP-210X Professional Combo

a-t.space/airtoys/products/star-power-fpv-racing-drone-qu...

The gate for fpv racing or drone pilot training

The gate for fpv racing or drone pilot training

I took the drone out and chased my friends around on the lake.

Here is the full video:

youtu.be/wcU0XvPY5pI

The gate for fpv racing or drone pilot training

jordanpouille@gmail.com

All rights reserved

www.jordanpouille.com

The gate for fpv racing or drone pilot training

Sony NEX-6

Leica R - 50mm f/2 Summicron

Having limited internet has made an interesting change in life. I makes it hard to do podcasts, and uploading images and polaroids is now at a significant cost.

So, I've started flying FPV racing quads a lot more (I have 3.5 acres now). I still take lots of pictures and love instant film, but this is quite a different adrenaline rush.

Oh, have I mentioned how I love this Summicron? Leica glass on the Sony is brilliant.

A different 4 day event near Roseburg Oregon. The West Coast Throwdown is all about drones. Racing, freestyle, open flying and comradery =fun. X Class were big badass drones.

Whistler Bend County Park.

Held August 9-13, 2017, at the International Aeromodeling Center in Muncie, Indiana.

Photos by Jenni Alderman

VIDEO by Dave Goddard

Chicagoland FPV March 13, 2021 - Rookie class racing

Held in partnership with the Suburban Aero Club of Chicago at the Tinley Creek Model Airplane field drone field. Weather was perfect to kick off this season.

Thanks to CD Andre Smith and everyone who helped set-up, take down the field, and coach flyers on racing. This is an important role in the hobby.

#ChicagolandFPV #ChicagoDroneRacers #MultiGP #SuburbanAeroClubofChicago #SuburbanAeroClub #IFlyAMA

www.suburbanaeroclub.com

2021 Events

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

This is just one of many locations that we will be going to as we spread FPV racing around the fixed wing community, so get those batteries charged up and get ready for the ride.

Dates: (location and dates are subject to change due to weather and other factors),

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

April 3, 2021 - Rookie TBD

April 10, 2021 - FunFly (Pro Day) TBD

April 11, 2021 - Sportsman TBD

April 24, 2021 - Sportsman TBD

May 2, 2021 - Sportsman TBD

May 15, 2021 - Special Event - Tiny Trainer and DJI TBD

May 30, 2021 - Sportsman TBD

June 12, 2021 Rookie TBD

July 4, 2021 Rookie Championship TBD

The gate for fpv racing or drone pilot training

The gate for fpv racing or drone pilot training

The gate for fpv racing or drone pilot training

My FPV racing quad.

Pilots launch their miniquads during the FPV Racing Philippines Championship Series in Baradas Airstrip, Tanauan City, Batangas

The gate for fpv racing or drone pilot training

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Michael Zafirov

Age: 15

Nation: Hong Kong

Drone racing: Two years

“I’ve been flying drones for two years and FPV racing for 18 months. I got into it from playing with radio-controlled cars and toys, and then decided to make my own.

“The first drone I built was actually the biggest one, a 500mm quad. I built it and it was flying and hovering around – my first DIY! I don’t really race a lot, I’m into freestyle. This is only my third race, but I’m passionate about it all.

“I didn’t make the top 64. First round I crashed, second round I only had two laps in, third lap, quad failure. I’ve got a 30-second lap now, but I should have done that yesterday.”

“I think the reason Juniors are so good is because of the learning curve. They race up that learning curve. If you give them a quad and enough batteries they just practice and learn. It’s amazing, they get good really fast.

“Also it’s because of video games, they are used to that. I’m not saying the adults aren’t good, but the Juniors do seem to learn quicker.”

Photo: FAI / Marcus King (free for editorial use)

NEON FPV racing in SF. sf.funcheap.com/thunder-drone-live-drone-racing-vr-drone-...

For celetrate the coming holidays Thanksgiving day and Chirstmas, Cobra motor factory store will offer holiday deals for Cobra Motors Official Group members from Nov 24th to Dec 24th,2016. If you wanna get this holiday deals, you should click this link ...

a-t.space/airtoys/products/cobra-motor-cp2205-2500-2500kv...

The gate for fpv racing or drone pilot training

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

The gate for fpv racing or drone pilot training

My FPV racing quad.

Held August 9-13, 2017, at the International Aeromodeling Center in Muncie, Indiana.

Photos by Rachelle Haughn

The gate for fpv racing or drone pilot training

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

The gate for fpv racing or drone pilot training

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

See the video here: zerodriftmedia.com/ama-gains-official-fpv-racing-special-...

1 December 2015 | 3:54 pm

The Academy of Model Aeronautics (AMA), led by its government council, has officially welcomed its most recent unique desire team (SIG), MultiGP, also acknowledged as Multirotor Grand Prix, to symbolize the initially-particular person-view racing group.

According...

zerodriftmedia.com/ama-gains-official-fpv-racing-special-...

Stumbled upon FPV drone racing, really want to do something like that. So I have ordered a 3D printer and material to build my own. And then a friend proposed an business proposition, not related to FPV racing. But interesting nonetheless.

Also decided to test scenic rendering in Fusion 360 at the same time, lol

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Chicagoland FPV March 13, 2021 - Rookie class racing

Held in partnership with the Suburban Aero Club of Chicago at the Tinley Creek Model Airplane field drone field. Weather was perfect to kick off this season.

Thanks to CD Andre Smith and everyone who helped set-up, take down the field, and coach flyers on racing. This is an important role in the hobby.

#ChicagolandFPV #ChicagoDroneRacers #MultiGP #SuburbanAeroClubofChicago #SuburbanAeroClub #IFlyAMA

www.suburbanaeroclub.com

2021 Events

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

This is just one of many locations that we will be going to as we spread FPV racing around the fixed wing community, so get those batteries charged up and get ready for the ride.

Dates: (location and dates are subject to change due to weather and other factors),

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

April 3, 2021 - Rookie TBD

April 10, 2021 - FunFly (Pro Day) TBD

April 11, 2021 - Sportsman TBD

April 24, 2021 - Sportsman TBD

May 2, 2021 - Sportsman TBD

May 15, 2021 - Special Event - Tiny Trainer and DJI TBD

May 30, 2021 - Sportsman TBD

June 12, 2021 Rookie TBD

July 4, 2021 Rookie Championship TBD

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Chicagoland FPV March 27, 2021 - Sportsman class FPV racing

Held in partnership with the Suburban Aero Club of Chicago at the Tinley Creek Model Airplane field drone field in Matteson, IL. Weather was perfect to kick off this season.

Thanks to CD Andre Smith & everyone who helped set-up, take down the field, and coach flyers on racing (this is an important role in the hobby). Devin Tornow, President of the Suburban Aero Club of Chicago, worked with Andre to get this event flying along and support and promote the hobby. Can’t wait until the next race!

www.flickr.com/photos/suburbanaeroclub/albums

#ChicagolandFPV #ChicagoDroneRacers #MultiGP #SuburbanAeroClubofChicago #SuburbanAeroClub #IFlyAMA

www.suburbanaeroclub.com/

2021 Events

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

This is just one of many locations that we will be going to as we spread FPV racing around the fixed wing community, so get those batteries charged up and get ready for the ride.

Dates: (location and dates are subject to change due to weather and other factors),

March 13, 2021 - Rookie Suburban Aero Club of Chicago

March 27, 2021 - Sportsman Suburban Aero Club of Chicago

April 3, 2021 - Rookie TBD

April 10, 2021 - FunFly (Pro Day) TBD

April 11, 2021 - Sportsman TBD

April 24, 2021 - Sportsman TBD

May 2, 2021 - Sportsman TBD

May 15, 2021 - Special Event - Tiny Trainer and DJI TBD

May 30, 2021 - Sportsman TBD

June 12, 2021 Rookie TBD

July 4, 2021 Rookie Championship TBD

fpdcc.com/places/locations/tinley-creek-model-airplane-fl...

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Michael Zafirov

Age: 15

Nation: Hong Kong

Drone racing: Two years

“I’ve been flying drones for two years and FPV racing for 18 months. I got into it from playing with radio-controlled cars and toys, and then decided to make my own.

“The first drone I built was actually the biggest one, a 500mm quad. I built it and it was flying and hovering around – my first DIY! I don’t really race a lot, I’m into freestyle. This is only my third race, but I’m passionate about it all.

“I didn’t make the top 64. First round I crashed, second round I only had two laps in, third lap, quad failure. I’ve got a 30-second lap now, but I should have done that yesterday.”

“I think the reason Juniors are so good is because of the learning curve. They race up that learning curve. If you give them a quad and enough batteries they just practice and learn. It’s amazing, they get good really fast.

“Also it’s because of video games, they are used to that. I’m not saying the adults aren’t good, but the Juniors do seem to learn quicker.”

Photo: FAI / Marcus King (free for editorial use)

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Walkera Runner 250: Specifically designed for the FPV Racing fraternity. The modular design of the Walkera Runner 250 allows the Pilot to change out race damaged components in a matter of minutes as you’ll see at QuadsForFun Homepage. The Speed controllers, flight controller, FPV Transmitter, receiver, OSD and LED Lights are designed to literally plug straight into the integrated printed distribution board meaning no soldering is required, making the Runner 250 super easy to build and repair. The full carbon fiber main frame of the Walkera Runner 250 is super compact and tough and can easily handle those inevitable collisions while the built in forward and rear LED lights help the Pilot with orientation when flying the Runner 250. The onboard OSD module overlays the Pilot flight footage with available telemetry such as battery voltage and the Runner 250's tilt angle. FEATURES (Walkera Runner 250): Built-in 5.8Ghz FPV Video transmitter; Built-in OSD Module (on screen display) to show to the Pilot, real-time flight data; Factory assembled, charge the battery and fly; Modular design for easy build and repair; Self tightening toughened composite propellers; Compact and strong carbon fiber main frame; Dampened camera mount platform; Front and rear LED lights (high-power bulbs); 12-14 mins flight time. 01 - Video Camera (Included Camera): A high-resolution camera. Provides real-time image without traditional lag; 02 - White LED Light: Front lamp, stronger and better quality, high-power bulbs; 03 - Landing Skids; 05 - Counterclockwise Motor; 04 - Clockwise Motor; 06 - Clockwise Propeller (White Cap): Uses the latest composite materials; Very tough and well suited to aerobatics; 07 - Counterclockwise Propeller (Black Cap); 08 - Mushroom Antenna: 5.8 G, long transmission range, supports real-time image transmission; 09 - TX5816 (FCC) or TX5817 (CE) Emitter; 10 - FCS-Runner 250 Main Controller; 11 - DEVO-RX710 Receiver; 12 - Red LED Light: Rear lamp, stronger and better quality, high-power bulbs; 13 - Battery: 3S, 11.1 volts, 2200 mAh, 25C, Li-Po; 14 - Gimbal/Support: Uses strong carbon fiber material and provides image stabilization, with a Sport Camera like Gopro, i-look, etc; 15 - Frame Parts: Made with extremely strong carbon fiber. Walkera Runner 250 Parts: RUNNER 250-Z-01; RUNNER 250-Z-02; RUNNER 250-Z-03; RUNNER 250-Z-04; RUNNER 250-Z-05; RUNNER 250-Z-06; RUNNER 250-Z-07; RUNNER 250-Z-08; RUNNER 250-Z-09; RUNNER 250-Z-10; RUNNER 250-Z-11; RUNNER 250-Z-12; RUNNER 250-Z-13; RUNNER 250-Z-14; RUNNER 250-Z-15; RUNNER 250-Z-16; RUNNER 250-Z-17; RUNNER 250-Z-18; RUNNER 250-Z-19; RUNNER 250-Z-20; RUNNER 250-Z-21; RUNNER 250-Z-22; RUNNER 250-Z-23; RUNNER 250-Z-24; RUNNER 250-Z-25; RUNNER 250-Z-26; RUNNER 250-Z-27; RUNNER 250-Z-28; RUNNER 250-Z-29; RUNNER 250-Z-30; RUNNER 250-Z-31; RUNNER 250-Z-32; BACKPACK; WALKERA DEVENTION GOGGLE 2 FPV GLASSES; HM-05#4-Z-23. Walkera Runner 250 (GPS) Advance as the name suggest, is the new version of Runner 250. It incorporates the use of GPS by market request, and yet retain the backpack quadcopter size of 250 mm. Adding GPS features to a racing quadcopter it looks maybe somehow inappropriate but, taking into consideration that the Walkera Runner 250 Advance has about 1000 meters flight range it is very nice to have a security tool in case the pilot can’t find the way back. It introduces the latest Walkera modular component design to make assembly fast, easy and upgradable. Something familiar for pilots, it brings functions such as Return to Home and GPS Altitude Hold. Upon Return to Home, the Runner will ascend to 15 meters from the ground to avoid hitting obstacles or maintain the same altitude if it is already above 15 meters. Another highlight is the camera, capable handling low-light performance during sunsets or just street lights, which allows the Pilot to enjoy easy night flights. With the help of colorful LEDs and Turn lights indicators, night flying will be easier as never was! The specification of the camera is 12 million pixel, 1080p, 60fps. The version with the telemetry data, the OSD displays flight modes, the Pilot position, home direction, yaw angle, battery status…to name a few. Carefully designed to the last detail, a buzzer alarm will sound if you lose a signal and it will assist the Pilot to locate the quadcopter. Full HD Mini Camera (1080p -60 Fps) (RUNNER 250(R)-Z-15); Front Guard (RUNNER 250(R)-Z-05); GPS Module (RUNNER 250(R)-Z-14); GPS Fixing Accessory (RUNNER 250(R)-Z-06); Direction Light (RUNNER 250(R)-Z-17); Propeller (Blades) (RUNNER 250(R)-Z-01); Brushless Motor (CCW) (RUNNER 250(R)-Z-10); Brushless Motor (CW) (RUNNER 250(R)-Z-09); 5.8G Mushroom Antenna (RUNNER 250(R)-Z-16). SPECIFICATIONS: Main Rotor Diameter: 143 mm; Overall (L x W x H): 236.0 x 205.0 x 102.0 mm; Weight: 446 grams (battery excluded); Remote Controller: DEVO F7 or DEVO 7; Receiver: DEVO-RX710 (R); Main Controller: FCS-RUNNER 250(R); Emitter: TX5816 (FCC) / TX581 (CE); OSD: Runner 250 OSD(R); Brushless Motor: WK-WS-28-014(CW/CCW); Brushless ESC: RUNNER 250; Battery: 11.1V, 2200mAh, 25C, 3S, Li-Po; Flight Time: up to 11 minutes; Working Temperature: -10°C to +40°C; Attention: Runner 250 Advance has different specifications when comparing to his brother Runner 250. Pay Attention. FEATURES:Easy to upgrade and maintain modular design; Strong carbon fiber airframe; 5.8GHZ real-time image transmission; Telemetry – real time flight data transmission (battery level, flying altitude, etc.); Dual GPS positioning for high accuracy (GPS & CLONNAS); One key return to home; Easy to control even on high speeds; Intelligent direction lights; Loud alarm when the aircraft is out of the transmitter’s range.

Just a photo of a night race with "The Other Guys", a MultiGP FPV Racing chapter I am a member of.