View allAll Photos Tagged Digger_Buckets
Perched on a digger bucket, on a sunny and windy day in Suffolk. Taken through a chain link fence. Heavily cropped.
Tiny backyard made for @newelementary competition “Construction Constructions”. Pleasure to get runner up prize. Construction parts used: 2x 18943 Technic Digger Bucket 5 x 7 x 4 1/2 Clamshell with Pin Hole and Axle Hole, 1x 43903 LegoTread with 20 Treads Small, 17x 4006 Minifigure, Utensil Tool Spanner Wrench / Screwdriver, 3x 64450 Windscreen 6 x 4 x 3 1/3 Roll Cage, 3873 LegoTechnic, Link Tread, 57518 Technic, Link Tread Wide with 2 Pin Holes. FIND THEM ALL 😃
Aight, this one's been in the works for a while. Started off as an IRL build that I transitioned into a digital build due to the usual lack of parts. I made this (I think) around the time I made the Fire station, but it's been in my mind since at least 2018, probably longer.
It's changed quite a bit since I first thought of it, it's more elaborate than it ever would have been if I'd done it IRL.
So, what's it got? Technically It's got four storey's but only the first three are usable as the roof is pretty packed due to how the digger buckets are connected. Back when I built this, I was building my Modular buildings a little bigger, hence why it's so tall.So the Ground floor is where the florist is, and the rest is the flat above. It's got a surprisingly big kitchen on the first floor, despite it's small size, and a bed on the second. And that's it as the floors are only....8x16? Minus room for the stairs. I could fit more in, but I haven't as yet.
Oh, and I should also point out the fence, which I'm very proud of. Might show off the technique I used separately at some point, as well as the rest of the interior. Should also point out that the flag bit would have the shops name on it, but due to a few factors it doesn't...mainly me not wanting to use part designer tbh.
And that's about it for the Florist. It's nice that I finally got it all rendered and uploaded. I really did go a bit mad with the modulars about a year ago, so there's still a few more to come.
This picture is so old, i've just not got round to uploading it.
I've always wanted to do a series of square format photos in black and white at night.
Square composition is very different to that we usually see. I think this works well, the frame dominantly taken by the scrap and what little negative space there is, filled by the moon and a few clouds and static stars.
I love how it looks, how the moon almost burns in to the rust on the digger bucket.
What does everyone think, more like this or, never do this again! haha
Diorama built for the Beetle Skyvan, presented in several brickexpo in 2022.
With digger bucket
www.bricklink.com/v2/catalog/catalogitem.page?P=46891#T=C...
Captured this Hearse complete with a Digger Bucket on its roof, Seen in Hulls Queen Victoria Square for the Hull Freedom (Arts) Festival,
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Took Phil and Fran back to a location i've been shooting at for 4 years now, It was always the same for years then suddently became really dodgy, someone really doesn't want people getting in here! But despite warnings and such it was an alright night, shame it didn't get out starry as I wanted to trail the abandoned house here, lucky we called it a night when we did because when we got back to the car it started to rain.
This gave me a change to test out my new wireless flash triggers with my second flashgun, they are awesome, the range on them is immense and it allowed me to light paint inside something I would not usually be able to with such ease.
Famous words from Toy Story in the title, I've seen Toy Story for too many times now because it's my Son's favourite film of all time.
We'll be back here soon enough i'm sure, on a cleae night hopefully.
Unedited as always.
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Little red end loader, can be converted from digger bucket to fork. Based on a design by Wigboldy www.flickr.com/photos/thirdwig/ who has made free instructions available. Check out original design here: www.flickr.com/photos/thirdwig/52079046603/in/album-72177...
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Little red end loader, can be converted from digger bucket to fork. Based on a design by Wigboldy www.flickr.com/photos/thirdwig/ who has made free instructions available. Check out original design here: www.flickr.com/photos/thirdwig/52079046603/in/album-72177...
Diorama built for the Beetle Skyvan, presented in several brickexpo in 2022.
With Scala umbrella www.bricklink.com/catalogItemIn.asp?P=6993&colorID=33...
and digger bucket
www.bricklink.com/v2/catalog/catalogitem.page?P=46891#T=C...
My fan concept of LEGO City subtheme desert explorers
Minifigure: 4 desert explorers and 2 paleontologist
Price: $100
Pieces: 897 (+1 new element needed for excavator)
Note: the treads cannot connect all the way in Stud.io.
The vehicle are pretty much based on Volcano Exploration Base (set 60124). The first thing I started making is the excavator, wanting to size it down for the truck and temple to look bigger. As this is smaller a new digger bucket piece is needed to fit with the size of it.
The truck and trailer pretty much have the same base as Volcano Base but the trailer have the base of the excavator. To make the truck a bit more different I added horns for decoration and an add-on armor as the fuel tank.
The playability is of the exploration team digger into the temple and retrieving the coffin, but there are traps within to keep an eye out for.
----
02-Feb-2025 12:07
Ilford HP5+ 400 @ EI 400
510 Pyro : 8 mins @ 20C
Pre-Wash : None
Inversions first 30 sec then 5 sec every 30 sec
Two water Stop Baths - 1 min each
Zero Image Eco Alkali Fixer
Clearing time 4 min. Total fix time 10 mins
Initial wash to remove fixer : 1 min
Washing : 10 mins with frequent water changes
Ilfotol : 1 ml in 800ml for 2 minutes
Mamiya 6 Automat (Olympus 75mm f3.5)
Filters : None
1/25 sec @ f22
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
DETAILS FOR THIS VEHICLE.
Location : Carlisle Kingmoor Yard.
Date : 06/10/2018.
Type : Open Ballast Wagon.
Weight : 46 t GLW / 13.6t Tare.
Number : 391482.
Number Series : Random examples in the 391000 to 391 082, 391101 to 391160 and 391201 to 391698 number series.
Builder : Rebuilt 1996-2004 by Marcroft Ltd / Toton C&W / Tees C&W / Barry C&W / RFS Industries Ltd.
TOPS Code : MFA.
CCE Code : 'COALFISH' (see footnotes).
ADDITIONAL NOTES.
The MFA's are colloquially known as "Coalfish" but the Engineers Department Fish name has been adopted for many of the 46 tonne 2 axle ballast/spoil wagons. A true 'Coalfish' is a conversion from an MGR hopper with an MHA or MPA TOPS Code. The MFA's have a 1 tonne higher capacity at 32.4 tonne than a true Coalfish and are a relatively small fleet of ballast spoil wagons converted from MEA open box wagon. The underframes were ex HEA house coal hoppers built by BR Shildon Works in 1982 and unlike the MHA Coalfish the MFA's can run at 60mph loaded or empty. The high sided MEA's were unsuitable for use on ballast sites as a digger bucket didn't have enough operating room under overhead power lines to load the wagon so EWS the owner after privatisation set about cutting down the height of the sides thus the change of TOPS code from MEA to MFA to reflect the change of use.
Brand new, tier-4 emissions compliant. See the specs for this machine here: www.specguideonline.com/product/link-belt-160x4-final-tier-4
Seen at a demolition project of flood-damaged houses. The bucket is positioned over the pile to "protect" the scrap from being stolen.
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Brand new, tier-4 emissions compliant. See the specs for this machine here: www.specguideonline.com/product/link-belt-160x4-final-tier-4
Seen at a demolition project of flood-damaged houses.
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Brand new, tier-4 emissions compliant. See the specs for this machine here: www.specguideonline.com/product/link-belt-160x4-final-tier-4
Seen at a demolition project of flood-damaged houses.
I re- visited Aberdeen's Hazelhead Park today Tuesday 23rd October 2018, I tracked down this magnificent sculpture as I enjoyed viewing it last time I was here,it is looking more rusty and weather beaten than I remember it.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials.
The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Need some help with the Head I think. Not changing the legs or hands may alter the forearms. If anyone has any ideas for the head, I'd like to hear em. I tried doing this with a digger bucket as well, also a 3x3 radar dish turned on its side! Feedback most welcome. :)
Little red end loader, can be converted from digger bucket to fork. Based on a design by Wigboldy www.flickr.com/photos/thirdwig/ who has made free instructions available. Check out original design here: www.flickr.com/photos/thirdwig/52079046603/in/album-72177...
Little red end loader, can be converted from digger bucket to fork. Based on a design by Wigboldy www.flickr.com/photos/thirdwig/ who has made free instructions available. Check out original design here: www.flickr.com/photos/thirdwig/52079046603/in/album-72177...
Renault Midliner 150
New - 1998
What looks to be an ex Northern Ireland Electricity (NIE) lorry has been parked up in a field near the Blue Gates on the B70 Boleran Road Garvagh County Londonderry for sometime now.
Not sure if the For Sale sign refers to the lorry or the digger buckets sitting on the chassis.
Here is the Lego Mindstorms EV3 "Fllying Lemur" robot ( rebrickable.com/mocs/DavidLuders/fllying-lemur-ev3-robot ) with the huge 15265 "Technic Digger Bucket 13 x 23" ( alpha.bricklink.com/pages/clone/catalogitem.page?P=15265&... ) used in the 42030 "Volvo L350F Wheel Loader" set. The bucket can be lifted and stay parallel to the ground, but cannot tilt downwards to dump. The Lego Digital Designer (LDD) .lxf Building Instructions file is available on Bricksafe (copy/paste entire string into your browser): bricksafe.com/files/dluders/Fllying%20Lemur%20EV3%20Robot%20(with%20big%20Volvo%20bucket).lxf
This "Fllying Lemur" Lego Mindstorms EV3 robot has a front lifting mechanism. The EV3 Ultrasonic Sensor (the Lemur's "eyes") can respond to your hand movements. The front EV3 Color Sensor allows for "line following" in FIRST Lego League (FLL) robot games. An optional #2951 "Technic Digger Bucket 8 x 10" ( www.bricklink.com/catalogItem.asp?P=2951 ) can be attached by altering the length of the (yellow) Technic Liftarms. An EV3 Gyro Sensor is hidden in the bottom. The Lego Digital Designer (LDD) .lxf Building Instructions file, along with the Parts List, are available on Rebrickable.com: rebrickable.com/mocs/DavidLuders/fllying-lemur-ev3-robot .
P26 BTL : Volvo FH 6x2 Tractor Unit of Bryants Transport Ltd. from Mile Elm, Calne, Wiltshire, with a low loader trailer carrying a load of digger buckets.
A350 - Upton Scudamore, between Westbury and Warminster.
22-12-2023
This "Fllying Lemur" Lego Mindstorms EV3 robot has a front lifting mechanism. The EV3 Ultrasonic Sensor (the Lemur's "eyes") can respond to your hand movements. The front EV3 Color Sensor allows for "line following" in FIRST Lego League (FLL) robot games. An optional #2951 "Technic Digger Bucket 8 x 10" ( www.bricklink.com/catalogItem.asp?P=2951 ) can be attached by altering the length of the (yellow) Technic Liftarms. An EV3 Gyro Sensor is hidden in the bottom. The Lego Digital Designer (LDD) .lxf Building Instructions file, along with the Parts List, are available on Rebrickable.com: rebrickable.com/mocs/DavidLuders/fllying-lemur-ev3-robot .
I visited Aberdeen's Hazelhead Park today, and stumbled across this magnificent sculpture, I checked its history through the internet and have included its story below for your perusal.
"The re-thinker"
"Re-thinker" by Lucas Dew 2014. Made from half a tonne of recycled steel, collected from recycling centres around Aberdeen.
The creation was inspired by Rodin's classic sculpture The Thinker, an iconic image that has been reproduced many times, but never using waste materials. The metal items, including pipes, bedsprings, spoons and a digger bucket, have been transformed into a work of art in a bid to change the way we think about rubbish.
The 6-foot high metal figure is on public display at Hazelhead Park Aberdeen.
Little red end loader, can be converted from digger bucket to fork. Based on a design by Wigboldy www.flickr.com/photos/thirdwig/ who has made free instructions available. Check out original design here: www.flickr.com/photos/thirdwig/52079046603/in/album-72177...
Picture from Bauma 2019. The show was one of the best in engcons history and with more than 620,000 visitors, the trade fair saw the best results in the exhibition’s 65-year history. engcon launched the new engcon standard: EC-Oil Quick Hitch System where you connect hydraulic tools in seconds without leaving the seat. engcon also launched the new compactor plate PC3500 and the sorting grapple SG14. engcon also showed three prototypes of detachable tools for the QSD hitch. Saw Cassette, Side Brush and a Hedge Cutter. Photo: Sten Strömgren