U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

.

I must obey the rules

I must be tame and cook

No staring at the clouds

I must stay on the ground

In clusters of the mice

The smoke is in our eyes

Like babies on display

Like angels in a cage

I must be pure and true

I must contain my views

There must be something else

There must be something good

Far away

Far away from here...

Challenge Factory Winner 27/8/15

Favorite #18, 2012: Salt Grass Trail Ride, 2012 Houston Live Stock Show and Rodeo Parade, Downtown Houston, Texas, USA. What says Texas like boots and spurs. The cowboy thought it strange I was focused on his boot but hey, I like the way it turned out.

(Click on image to view on black)

5501 Black Ugg Ashur Tall Rosie Boots Women is a UGG Ashur Tall Boots with the following functions:

1.The cosy fleece lets air to circulate which not only keeps your feet dry but watermark free

2.The Classic Tall is perfect for any ocassion,business or pleasure.

3.Rosie is made with exquisite leather and features a sheepskin lined boot tab.The western inspired silhouette laces up the front for a custom fit.Insole features a genuine sheepskin sockliner that naturally wicks away moisture and keeps feet dry.Inside zipper provides easy on/off and a sleek look.Well-crafted stacked leather outsole and heel supply durability and style.

www.uggpack.com/5501-black-ugg-ashur-tall-rosie-boots-wom...

Fascinating sexy lady boot

Style No: WJ-13T-1

Upper: sheep leather & suede

Lining: pigskin

Heel: Printed heel

Outsole: Rubber

Website:www.w-shoes.com

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

...you owled boot...said with the right accent.

Boot left in south London railings

A lonely Allstars trainer/boot seen bobbing in the tide just up from the Kinnegar Pier :)

Classic boot with its soft, flexible leather and eye-catching strap that gives it a playful, feminine touch.

Utilizes a soft and lightweight synthetic leather uppers which keep the shoe lightweight, comfortable and ensures durability.

Soft flannelette lining naturally wicks away moisture to keep your feet dry and warm throughout the day.

Wrap-around metallic strap adds feminine flair at foot.

Stitched cap toe and Wedge heel.

Zipper detail found on side wall of shoe.

Lightly padded footbed provides cushioning and support with each step.

The highly slip-resistant rubber outsole ensures stable and secure walking.

Branding at Spring Valley Ranch near Anton Chico, NM

Boot

1873 Grey Ugg Bailey Button Boots Women is a UGG Bailey Button Boots with the following functions:

1.The cosy fleece lets air to circulate which not only keeps your feet dry but watermark free

2.The Classic Tall is perfect for any ocassion,business or pleasure.

3.We've updated the traditional style of our Classic Tall with wooden UGG logo buttons and elastic band closures.The women's UGG Bailey Button Triplet can either be worn up or cuffed down adding a little variety depending on your style.All boots in our Classic Bailey Collection feature a soft foam insole covered with genuine sheepskin and have a molded EVA light and flexible outsole designed for amazing comfort with every step.

4.Twinface Grade A sheepskin with raw edges,suede heel guards and nylon binding;Designed with elastic closures and functional wood buttons that have been laser-etched with our UGG logo.Suede heel guards have signature woven UGG label;Approximate boot shaft height:11;Cushy foam for extra comfort covered with a genuine sheepskin sock that naturall;wicks away moisture and helps keep your feet dry;Light and flexible molded EVA bottom with a patent protected outsole design.

www.uggpack.com/1873-grey-ugg-bailey-button-boots-women-p...

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

boat at the beach near the mauretanian border. What me made me stunning, it`s an aluminium boat - looks like wood with its peeled off colours.

To celebrate the collaboration between Hunter Boot and Glastonbury's official charity WaterAid – dedicated to providing the world's poorest people with access to clean water, hygiene and sanitation - a number of high profile celebrities were invited to customise and sign the limited edition WaterAid welly at this year's Glastonbury Festival. The wellies were designed exclusively for WaterAid and the world famous Glastonbury Festival to raise money for the 'Hunter for WaterAid' project, dedicated to helping people in remote regions of Madagascar.

Bye bye old vintage boot garbage is the way now

my old worn cat work boots

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

Leksand, Sweden.

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

Ye Olde Boot Inn, Cloghran, County Dublin. A long time in existence at the back of Dublin Airport, 12th July 2020.

An old boot suspended across a road in Montrose, Scotland. Black and white.

Finally got my friend T to play around with one boot. I love these socks on her. I'm going to try to borrow these.

Bandolino 'dress' ankle boot with side zip and ornamental silver buckle/strap, tapered toe and a 2 1/2" blade heel. Perfect with slacks and jeans.

Ye Olde Boot Inn, Cloghran, County Dublin. A long time in existence at the back of Dublin Airport, 12th July 2020.

NewRock Boots

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711

U-BOOT TYP VII C - 1/38 (minifig) scale with full interior.

~ 177 CM (~70 INCH) LONG

~ 15.000 PARTS

~ 4.5 YEARS OF WORK

GOALS

The model was supposed to represent a ship from the initial period of the war.

It does not show a specific copy, but it should resemble uboots such as U-69 or U-96 (known from the classic Das Boot movie).

I wanted to get a fairly good representation of both the curves of the hull and as many pieces of internal equipment as possible.

MODEL CHARACTERISTICS

It consists of 6 modules that naturally represent the 6 sections of a real ship:

1. The forward torpedo room and crew compartment [Bow: ~ 3600 parts]

2. Officers', radio and listening room [Front mess: ~ 2000 parts]

3. Control room with conning tower [Control room: ~ 2700 parts]

4. Petty Officers' romm and galley [Rear mess: ~ 1700 parts]

5. Diesel engines room [Diesels: ~ 2400 parts]

6. Electric engines and aft torpedo room [Stern: ~ 2800 parts]

In each module, the port and / or starboard can be removed.

So the entire model can represent the ship from the outside or with an open interior.

The target configuration is with the starboard closed and the port open.

I finally made two photo sessions of the entire model - in a fully closed configuration and with a closed starboard and open port side.

Adittionally I have prepared presentation of individual modules separately.

[b][CONSTRUCTION][/b]

The construction was planned to be made in sections and I started from the control room.

Each module was first designed in LDD (first the hull, then the interior) and then built in reality.

The modules were created in this order:

3. Control room

2. Front mess

1. Bow

4. Rear mess

5. Diesels

6. Stern

Designing started on 26.12.2017.

[b][PHOTOS][/b]

I invite you to view photos.

I'm sorry that there are so many, but I couldn't resist.

(it took me about 3 months to photograph and post-process them)

Flickr albums (part of the photos):

0. Overall: www.flickr.com/photos/pigletciamek/albums/72177720300082599

1. Bow: www.flickr.com/photos/pigletciamek/albums/72177720300077412

2. Front mess: www.flickr.com/photos/pigletciamek/albums/72177720300086873

3. Control room: www.flickr.com/photos/pigletciamek/albums/72177720300082694

4. Rear mess: www.flickr.com/photos/pigletciamek/albums/72177720300082699

5. Diesels: www.flickr.com/photos/pigletciamek/albums/72177720300086878

6. Stern: www.flickr.com/photos/pigletciamek/albums/72177720300077462

0-6. Alltogether: www.flickr.com/photos/pigletciamek/albums/72177720300076411

BS (all photos):

0. Overall: brickshelf.com/cgi-bin/gallery.cgi?f=584704

1. Bow: brickshelf.com/cgi-bin/gallery.cgi?f=584706

2. Front mess: brickshelf.com/cgi-bin/gallery.cgi?f=584707

3. Control room: brickshelf.com/cgi-bin/gallery.cgi?f=584708

4. Rear mess: brickshelf.com/cgi-bin/gallery.cgi?f=584709

5. Diesels: brickshelf.com/cgi-bin/gallery.cgi?f=584710

6. Stern: brickshelf.com/cgi-bin/gallery.cgi?f=584711