View allAll Photos Tagged Automation
Mrs. J. William Clark House, 49 East 68th Street, Upper East Side, Manhattan, New York City, New York, United States.
This house adjoins and may be considered a part of that outstanding group of neo-Federal townhouses which extends along the west side of Park Avenue, between East 68th and 69th Streets. The houses on Park Avenue are sometimes referred to as the "Pyne-Davison Blockfront" due to their uniform architectural quality.
It was designed by the architectural firm of Trowbridge & Livingston and was built in 1913-14. The height of its first story base, the belt course between the third and fourth floors and the roof cornice are set at approximately the same level as those of the corner house, No. 680 Park Avenue.
Only two bays wide, No. 49 East 68th Street Is given interest and importance by a twin-arched loggia at street level. This is made possible by having the wall of the first floor set back about six feet from the building line. The arch on the right leads to the arched entrance doorway, while that on the left leads directly to the basement stairs protected by a low iron railing and gate. An arched window is set above the basement entrance door.
The second-story windows were originally muntined casements extending to the floor. These and all the other windows facing the street were replaced with single fixed sheets of plate glass, when the entire structure was air-conditioned, however, the two second-story windows have retained their thin vertical limestone reveals at the windows. The second floor lintels consist of delicate projecting cornices supported on console brackets.
The third story windows have paneled stone lintels, while a limestone horizontal belt course separates the third and fourth floors and serves as a sill for the fourth floor windows. A simple limestone roof cornice crowns the brickwork of the facade, which is laid up in English bond. The copper covered gambrel roof above is pierced by two Pedimented dormer windows.
This house was built as a residence for J. William Clark, a grandson of the Patrick Clark who invented the form of cotton sewing thread, that was first produced in Paisley, Scotland in 1812. Clark's sewing thread was introduced to America in 1818, but, during the Civil War, when importing became difficult, William Clark and his brother opened a thread mill in Newark, New Jersey, where a 6-cord thread, trademarked "O.N.T." (Our New Thread), was perfected and became famous. Today this building is known as "Automation House".
- From the 1970 NYCLPC Landmark Designation Report
The GadgEon Lifestyle have years of experience in the home automation industry. With the help of trusted products the GadgEon offers best services for the clients. Follow the link to know more information about the home automation.
Photograph of a Hydro-Tel lathe manufactured by The Cincinati Milling Machine Co. of Ohio. Part of a collection of photographs from Dean Smith and Grace Ltd. Photographic Department. This photograph carries nothing on the back of it.
Three Keighley engineers, Joseph Dean (1824-1909), James Smith (1834-1906) and John Grace (1840-1904), formed the partnership Dean, Smith & Grace in 1865. The men borrowed money to buy land from the Duke of Devonshire and built the Worth Valley Works. According to their 1889 catalogue, they manufactured machine tools “for locomotive, marine and general engineering, ordnance manufacturers, boilermakers, shipbuilders etc. etc.” and had already procured various government contracts. By 1883 their debts had been cleared and in 1898 the partnership became a limited company.
In the early years of the 20th century, some rebuilding and restructuring took place and the company started to specialise in the manufacture of industrial lathes. Their reach was global, doing trade deals with Australia, Japan, Italy, the Netherlands, Turkey, Spain, Mexico and Argentina.
At the outbreak of World War One, now trading as Dean, Smith & Grace (1908) Ltd., the firm’s efforts were recognised in a letter from Lord Kitchener. The letter, dated 22nd October 1914, acknowledged the importance of the work undertaken by the firm and its employees in playing their part towards the war effort. During this period the company also manufactured breech blocks for guns. From 1938, the firm was run by Sir Harry Smith, James Pearson and Bert Laycock.
During World War Two, Dean, Smith & Grace financed their own Spitfire as part of a nationwide drive to raise money for fighter planes. They produced lathes for all branches of the armed forces, the government’s Ministry of Supply and for the Admiralty, and became one of the first traditionally all-male firms to employ women. At their output peak they were producing 107 machines per month, meaning one-fifth of all the lathes manufactured in this country were coming from Dean, Smith & Grace. In 1948, a new range of lathes was exhibited the Machine Tool Exhibition held at Olympia in London, which led to considerable trade with Canada.
According to advertising from the time, by 1960 they were manufacturing 13” to 30” swing engine lathes, surfacing and boring lathes, and precision tool room lathes. The works at this time boasted many labour-saving devices including mechanised accounting machines, colour-coded signalling systems and index systems for accounts and stores control. Staff benefitted from a superannuation scheme, a canteen (with DSG-stamped cutlery) and a surgery “with sun-ray and infra-red lamps for treatment during working hours”. The company also had its own sports field and pavilion for its cricket team and other sporting activities. The firm boasted of its employee loyalty, recognising long periods of service – in one case over sixty years.
A new foundry in Lawkholme Lane, the Nelson Works, was built between 1962 and 1965. In 1974 the company was sold to US company Monarch Machine Tool Co. The firm then became independent again in 1992, rebranding as DSG Lathes. There was a management buyout in 2005 and former Rolls-Royce engineer Nigel Grainger took over as managing director. He initiated a rebrand and a complete overhaul of the product range, including the launch of new aerospace and pipe lathes. In 2008 the company went into administration and was bought by Newsmith Stainless Ltd. and traded as Dean Smith & Grace Lathes Ltd. In 2012 the company was sold on to Machine Tool Technology Group who in 2015 made the decision to move the firm from Keighley to Halifax.
Dean Smith & Grace is now a Belgrave & Powell Ltd. company operating out of Preston in Lancashire. According to its website “it still develops new machine tools but also offers robotics and automation, CNC retrofitted solutions, rebuilds, machine tool services and breakdown support for all types of machine tools with the same level of professionalism and pride in the name instilled in the business over a 150 years ago”. An example of a Dean, Smith & Grace lathe is held in the Science Museum Group’s collection.
The original photograph measures approximately 260mm by 205mm and is held in the Keighley and District Local History Society's physical archive. It was scanned on behalf of the History Society by Billy Stride in 2021.
I'm using this to send commands to 15 Home Easy modules from Node-RED as part of my home automation system.
Now that the decision to implement cash recyclers in the branches has been made, executives can help to maximize the value realized from this technology by attending to a few post-implementation best practices. Visit us: www.bankersequipment.com/2017/06/21/branch-cash-automatio...
BIBUS INDIA one stop shop for all you Industrial Automation needs for more visit > www.bibus.in/products-solutions/
The home automation services became very popular in these days. The home automation trends varies according to the technology. GadgEon Lifestyle have succeeded in this. Follow the link to know more information about the home automation.
Mrs. J. William Clark House, 49 East 68th Street, Upper East Side, Manhattan, New York City, New York, United States.
This house adjoins and may be considered a part of that outstanding group of neo-Federal townhouses which extends along the west side of Park Avenue, between East 68th and 69th Streets. The houses on Park Avenue are sometimes referred to as the "Pyne-Davison Blockfront" due to their uniform architectural quality.
It was designed by the architectural firm of Trowbridge & Livingston and was built in 1913-14. The height of its first story base, the belt course between the third and fourth floors and the roof cornice are set at approximately the same level as those of the corner house, No. 680 Park Avenue.
Only two bays wide, No. 49 East 68th Street Is given interest and importance by a twin-arched loggia at street level. This is made possible by having the wall of the first floor set back about six feet from the building line. The arch on the right leads to the arched entrance doorway, while that on the left leads directly to the basement stairs protected by a low iron railing and gate. An arched window is set above the basement entrance door.
The second-story windows were originally muntined casements extending to the floor. These and all the other windows facing the street were replaced with single fixed sheets of plate glass, when the entire structure was air-conditioned, however, the two second-story windows have retained their thin vertical limestone reveals at the windows. The second floor lintels consist of delicate projecting cornices supported on console brackets.
The third story windows have paneled stone lintels, while a limestone horizontal belt course separates the third and fourth floors and serves as a sill for the fourth floor windows. A simple limestone roof cornice crowns the brickwork of the facade, which is laid up in English bond. The copper covered gambrel roof above is pierced by two Pedimented dormer windows.
This house was built as a residence for J. William Clark, a grandson of the Patrick Clark who invented the form of cotton sewing thread, that was first produced in Paisley, Scotland in 1812. Clark's sewing thread was introduced to America in 1818, but, during the Civil War, when importing became difficult, William Clark and his brother opened a thread mill in Newark, New Jersey, where a 6-cord thread, trademarked "O.N.T." (Our New Thread), was perfected and became famous. Today this building is known as "Automation House".
- From the 1970 NYCLPC Landmark Designation Report
Samples are moved from the autosampler tray to the test position using a suction transfer system. This system is highly tolerant of non-ideal sample geometries, so uncured rubber from many sources can be used. Samples are loaded on a carousel and more specimens may be added while another test is in progress, allowing for uninterrupted productivity.
Robotic process automation (RPA)— commonly used to automate organized, back office programmed process tasks—turns out to be the opening plan in many organizations’ for digital transformation methods.
I had never happened upon a w-c with this much automation. Ok, I am easily impressed but as I often say, I like to think of it as having retained my capacity for wonderment.
Keeping today’s market demand, multiple supply chain automation companies are now stepping ahead to implement the warehouse management robotic systems to deliver the goods to the users even faster than ever.
Home theatre sell and Home Automation control systems from soundsolutionsvictoria.com. The capacity to control your Tv stereo or even your whole home theater.
Take a look at our infographic for the benefits of automation.
Wellington House,
57 Dyer Street,
Cirencester,
Gloucestershire,
GL7 2PP.
From top, Raspberry PI computer, USB hub, Relay board, LED drivers and Arduino nano.
This computer connects to devices around my house to monitor and control the environment. The relays at center control a solenoid door striker, and LED entry lights.
Mrs. J. William Clark House, 49 East 68th Street, Upper East Side, Manhattan, New York City, New York, United States.
This house adjoins and may be considered a part of that outstanding group of neo-Federal townhouses which extends along the west side of Park Avenue, between East 68th and 69th Streets. The houses on Park Avenue are sometimes referred to as the "Pyne-Davison Blockfront" due to their uniform architectural quality.
It was designed by the architectural firm of Trowbridge & Livingston and was built in 1913-14. The height of its first story base, the belt course between the third and fourth floors and the roof cornice are set at approximately the same level as those of the corner house, No. 680 Park Avenue.
Only two bays wide, No. 49 East 68th Street Is given interest and importance by a twin-arched loggia at street level. This is made possible by having the wall of the first floor set back about six feet from the building line. The arch on the right leads to the arched entrance doorway, while that on the left leads directly to the basement stairs protected by a low iron railing and gate. An arched window is set above the basement entrance door.
The second-story windows were originally muntined casements extending to the floor. These and all the other windows facing the street were replaced with single fixed sheets of plate glass, when the entire structure was air-conditioned, however, the two second-story windows have retained their thin vertical limestone reveals at the windows. The second floor lintels consist of delicate projecting cornices supported on console brackets.
The third story windows have paneled stone lintels, while a limestone horizontal belt course separates the third and fourth floors and serves as a sill for the fourth floor windows. A simple limestone roof cornice crowns the brickwork of the facade, which is laid up in English bond. The copper covered gambrel roof above is pierced by two Pedimented dormer windows.
This house was built as a residence for J. William Clark, a grandson of the Patrick Clark who invented the form of cotton sewing thread, that was first produced in Paisley, Scotland in 1812. Clark's sewing thread was introduced to America in 1818, but, during the Civil War, when importing became difficult, William Clark and his brother opened a thread mill in Newark, New Jersey, where a 6-cord thread, trademarked "O.N.T." (Our New Thread), was perfected and became famous. Today this building is known as "Automation House".
- From the 1970 NYCLPC Landmark Designation Report