View allAll Photos Tagged 3dsupercarbricks
This is my LEGO version of the McLaren P1. It has around a thousand pieces and it took me 2 weeks to design. The doors and spoiler are functional as the real version. Enjoy!
Koenigsegg CC850 — my take on this iconic hypercar, built as a LEGO MOC using around 950 pieces, plus a few custom-designed parts for those signature details.
This model blends the classic lines of the original CC8S with the modern edge of the CC850, staying true to Koenigsegg’s unique design language. A real challenge to capture in LEGO form, especially with the mix of curves and sharp surfaces.
Part of the 3DSupercarBricks collection — built for display, built for car enthusiasts.
.
.
I’ve been working on this creation for a couple months.
.
.
.
Behind the bricks story:
Some time ago I had a customer that came to me and wanted a commission.
He wanted the Apollo IE or this AMG project one. Both amazing cars and we decided on the Apollo. The Mercedes was still a concept back then.
Last summer Mercedes announced that there would be 275 units produced, which all sold out. When the news came out and it became “real” I needed to build it. So here it is. My Brick build rendition of the Project one.
This rendition features openable doors. And an active spoiler which was hard to make since the rear only sticks out 3,5 studs and the technic piece I used for it, needed to be 5 studs in height. This needed to be this long so that the spoiler could move up just high enough that it would sit right under the fin on the back.
This creation also features 3D-printed door frames, canards and wheels. (The wheels took me some time 😂)
.
.
.
Real car stats:
It’s assisted by two electric motors, one to boost the engine and one fitted to the F1-style turbocharger. Combined, the engine and motors produce 1,063hp
Mercedes claim that this car will do 0-60mph in 2.9 seconds, and 0-124mph in under six seconds. The top speed is over 217mph.
Oh yeah and the car will be sold for around 2.7M USD .
Chances that you’ll be able to own one of these are close to none but building this scale model out of bricks can be done. Head over to my website and there you’ll be able to get the preorder in. Instructions will be available late December.
Enjoy the post and happy building!
.
.
I’ve been working on this creation for a couple months.
.
.
.
Behind the bricks story:
Some time ago I had a customer that came to me and wanted a commission.
He wanted the Apollo IE or this AMG project one. Both amazing cars and we decided on the Apollo. The Mercedes was still a concept back then.
Last summer Mercedes announced that there would be 275 units produced, which all sold out. When the news came out and it became “real” I needed to build it. So here it is. My Brick build rendition of the Project one.
This rendition features openable doors. And an active spoiler which was hard to make since the rear only sticks out 3,5 studs and the technic piece I used for it, needed to be 5 studs in height. This needed to be this long so that the spoiler could move up just high enough that it would sit right under the fin on the back.
This creation also features 3D-printed door frames, canards and wheels. (The wheels took me some time 😂)
.
.
.
Real car stats:
It’s assisted by two electric motors, one to boost the engine and one fitted to the F1-style turbocharger. Combined, the engine and motors produce 1,063hp
Mercedes claim that this car will do 0-60mph in 2.9 seconds, and 0-124mph in under six seconds. The top speed is over 217mph.
Oh yeah and the car will be sold for around 2.7M USD .
Chances that you’ll be able to own one of these are close to none but building this scale model out of bricks can be done. Head over to my website and there you’ll be able to get the preorder in. Instructions will be available late December.
Enjoy the post and happy building!
918 @faisalbinladen
.
.
.
2/3 completed on the #faisalbinladenproject
.
.
.
This model is my Porsche 918 LEGO replica. It features custom taillights and wheelcaps to reassemble the Porsche 918 iconic wheels. It’s build out of roughly 1000 LEGO pieces, is about 30 cm in length and weights about 1kg.
The design:
Tmodel I already designed and shown before a couple months ago. However this version features a dark brown interior and has a small change to the rear.
.
.
.
About the small change:
If you can notice I put the sides of the rear 0,5 plates down to make it align perfectly with the bodywork and make the top be able to feature a wedge part. The rear now has an even better curved and shaped 🍑😜
.
.
.
What is your favorite feature from this Porsche 918 lego replica?
#3dprinting #3dsupercarbricks #design #afol #afols #creations #instalego #lego #supercar #legocar #hypercar #3d #legocar #legocreate #create #moc #amsterdam #bricks #legophotography #legosupercar #legocarmoc #legocollection #zonda #zondaR #pagani #paganizondar
This is my McLaren P1 made for a customer. If you want a specific car build, just like this one, you can order it here: www.3dsupercarbricks.com/shop/p/create-your-own-supercar
I’ve finally found the time to finish this Pagani with some bricks that came in and printed parts that needed to fit right.
One of the most requested cars on my page, mainly because it’s almost impossible to recreate… but I took on the challenge and this is the result :)
The Pagani Huayra is a weird car. Some hate it and some love it. It’s like there is no in between…
I loved the Zonda really much and I always thought that the Huayra didn’t have the “looks” of the Zonda. But trough this building process I started to fall in love with the car! I love the outcome and im really happy with it. Instructions will be up soon!
This is my LEGO version of the McLaren P1. It has around a thousand pieces and it took me 2 weeks to design. The doors and spoiler are functional as the real version. Enjoy!
Regera 🍑
.
.
.
One of my personal faves and from what I understand from my following one of my best designs till this date.
.
.
.
Enjoy this slideshow!
.
.
.
#koenigseggregera #regera #koenigsegg #legokoenigsegg #3dsupercarbricks #legocar
Full reveal of my Rx7 with Volk TE37 SL's! Speced out with Face 3 and staggered lips, creating a deeper dish look for the rear. I'm excited to actually create deep dish wheels in the future. It will also be cool to see these wheels in a different color. More pics tomorrow!
Version: v1.0
Wheels: Volk TE37 SL v1.0 - Face 3 - Lip 2/3
Scale: ~1:17
Inspiration: @tcpmagic @streethunterdesigns @aprperformance @tomei_84 @mazdausa @3dsupercarbricks @rayswheels_official
.
.
I’ve been working on this creation for a couple months.
.
.
.
Behind the bricks story:
Some time ago I had a customer that came to me and wanted a commission.
He wanted the Apollo IE or this AMG project one. Both amazing cars and we decided on the Apollo. The Mercedes was still a concept back then.
Last summer Mercedes announced that there would be 275 units produced, which all sold out. When the news came out and it became “real” I needed to build it. So here it is. My Brick build rendition of the Project one.
This rendition features openable doors. And an active spoiler which was hard to make since the rear only sticks out 3,5 studs and the technic piece I used for it, needed to be 5 studs in height. This needed to be this long so that the spoiler could move up just high enough that it would sit right under the fin on the back.
This creation also features 3D-printed door frames, canards and wheels. (The wheels took me some time 😂)
.
.
.
Real car stats:
It’s assisted by two electric motors, one to boost the engine and one fitted to the F1-style turbocharger. Combined, the engine and motors produce 1,063hp
Mercedes claim that this car will do 0-60mph in 2.9 seconds, and 0-124mph in under six seconds. The top speed is over 217mph.
Oh yeah and the car will be sold for around 2.7M USD .
Chances that you’ll be able to own one of these are close to none but building this scale model out of bricks can be done. Head over to my website and there you’ll be able to get the preorder in. Instructions will be available late December.
Enjoy the post and happy building!
With this dark blue regera I find so many modification options. I LOVE IT! As you can see I printed some parts for the front and side skirts. Making it look just a bit more accurate like the one @mrjww filmed on YouTube.
I saw the video featuring this koenigsegg with the orange detailing and I just had to make it. I'm happy how it turned out!
With this dark blue regera I find so many modification options. I LOVE IT! As you can see I printed some parts for the front and side skirts. Making it look just a bit more accurate like the one @mrjww filmed on YouTube.
I saw the video featuring this koenigsegg with the orange detailing and I just had to make it. I'm happy how it turned out!
With this dark blue regera I find so many modification options. I LOVE IT! As you can see I printed some parts for the front and side skirts. Making it look just a bit more accurate like the one @mrjww filmed on YouTube.
I saw the video featuring this koenigsegg with the orange detailing and I just had to make it. I'm happy how it turned out!
Koenigsegg FE THOR
A couple weeks ago I’ve posted about making instructions out of the One:1. During the revision of the One:1 I decided to make the Thor for a moc. This is one of my all time favorite cars!
Don’t worry! The One:1 will be made. I actually figured out the printed part for the rear (which you can see in the last picture) that I’m also gonna use for these instructions. Instructions will be dropped at 3dsupercarbricks.com #linkinbio
It’s been a long time since I’ve posted good quality pictures. I have to thank @evaottevanger for these. If you want to see more of her work, please click the link!
I’m really hyped about this moc. I hope you all do! Let me know what you think!
Have a good weekend!
#3dprinting #design #afol #afols #creations #supercar #hypercar #create #moc #bricks #koenigsegg #thor #koenigseggagera #race #bricklink #hypercar #car #koenigseggthor #koenigseggfe #legomoc #agera #lego #rs #regera #gemera #ghost #ghostsquadron
This is my LEGO version of the McLaren P1. It has around a thousand pieces and it took me 2 weeks to design. The doors and spoiler are functional as the real version. Enjoy!
1170 LEGO bricks, 4 custom 3d-printed bricks and a set of wheels. Instructions available on 3dsupercarbricks.com
Koenigsegg FE THOR
A couple weeks ago I’ve posted about making instructions out of the One:1. During the revision of the One:1 I decided to make the Thor for a moc. This is one of my all time favorite cars!
Don’t worry! The One:1 will be made. I actually figured out the printed part for the rear (which you can see in the last picture) that I’m also gonna use for these instructions. Instructions will be dropped at 3dsupercarbricks.com #linkinbio
It’s been a long time since I’ve posted good quality pictures. I have to thank @evaottevanger for these. If you want to see more of her work, please click the link!
I’m really hyped about this moc. I hope you all do! Let me know what you think!
Have a good weekend!
#3dprinting #design #afol #afols #creations #supercar #hypercar #create #moc #bricks #koenigsegg #thor #koenigseggagera #race #bricklink #hypercar #car #koenigseggthor #koenigseggfe #legomoc #agera #lego #rs #regera #gemera #ghost #ghostsquadron
Regera 🍑
.
.
.
One of my personal faves and from what I understand from my following one of my best designs till this date.
.
.
.
Enjoy this slideshow!
.
.
.
#koenigseggregera #regera #koenigsegg #legokoenigsegg #3dsupercarbricks #legocar
What's that I see? Custom brake rotors!
After creating custom wheels and tires, I couldn't forget the last details. I tested using various Lego pieces for the rotors, but I didn't find anything that I really liked. So, I had to make my own. For my first design, I made these slotted, but I can of course create other rotor designs.
For the calipers, I really wanted to stick with a Lego piece, so I can use their colors. I tried so many pieces. I tested the curved 1x2 jumper, but it was too big. I saw @3dsupercarbricks use the claw piece which is really clever, but it would have been tough to attach to the rotors. I then found the ingot piece, which is what I am using. I like how it has a taper at the top of each corner, which gives it a rounder look. It's not the perfect representation of a caliper, but I am happy with how it looks.
The size of the rotor and caliper fit really well into the wheel. However, I'm thinking of future compatibility with other wheels, so I'm going to test fitting smaller rotors.
Version: v1.1
Wheels: Volk TE37 SL v1.0 - Face 3 - Lip 2/3
Scale: ~1:17
Inspiration: @streethunterdesigns @varis_japan @toyota @toyotires @rayswheels_official
This is my LEGO version of the McLaren P1. It has around a thousand pieces and it took me 2 weeks to design. The doors and spoiler are functional as the real version. Enjoy!
This is my LEGO version of the McLaren P1. It has around a thousand pieces and it took me 2 weeks to design. The doors and spoiler are functional as the real version. Enjoy!
Koenigsegg FE THOR
A couple weeks ago I’ve posted about making instructions out of the One:1. During the revision of the One:1 I decided to make the Thor for a moc. This is one of my all time favorite cars!
Don’t worry! The One:1 will be made. I actually figured out the printed part for the rear (which you can see in the last picture) that I’m also gonna use for these instructions. Instructions will be dropped at 3dsupercarbricks.com #linkinbio
It’s been a long time since I’ve posted good quality pictures. I have to thank @evaottevanger for these. If you want to see more of her work, please click the link!
I’m really hyped about this moc. I hope you all do! Let me know what you think!
Have a good weekend!
#3dprinting #design #afol #afols #creations #supercar #hypercar #create #moc #bricks #koenigsegg #thor #koenigseggagera #race #bricklink #hypercar #car #koenigseggthor #koenigseggfe #legomoc #agera #lego #rs #regera #gemera #ghost #ghostsquadron
.
.
I’ve been working on this creation for a couple months.
.
.
.
Behind the bricks story:
Some time ago I had a customer that came to me and wanted a commission.
He wanted the Apollo IE or this AMG project one. Both amazing cars and we decided on the Apollo. The Mercedes was still a concept back then.
Last summer Mercedes announced that there would be 275 units produced, which all sold out. When the news came out and it became “real” I needed to build it. So here it is. My Brick build rendition of the Project one.
This rendition features openable doors. And an active spoiler which was hard to make since the rear only sticks out 3,5 studs and the technic piece I used for it, needed to be 5 studs in height. This needed to be this long so that the spoiler could move up just high enough that it would sit right under the fin on the back.
This creation also features 3D-printed door frames, canards and wheels. (The wheels took me some time 😂)
.
.
.
Real car stats:
It’s assisted by two electric motors, one to boost the engine and one fitted to the F1-style turbocharger. Combined, the engine and motors produce 1,063hp
Mercedes claim that this car will do 0-60mph in 2.9 seconds, and 0-124mph in under six seconds. The top speed is over 217mph.
Oh yeah and the car will be sold for around 2.7M USD .
Chances that you’ll be able to own one of these are close to none but building this scale model out of bricks can be done. Head over to my website and there you’ll be able to get the preorder in. Instructions will be available late December.
Enjoy the post and happy building!