View allAll Photos Tagged wheelbuilding
Written on 2 Jan 2012
Latest update: 12 juillet 2013
Picture: _DSC2061_C_900
The Brompton: Mark 4 model. Year of production: 2009. Frame # 285337
The tutorials and lots of technical informations are written in french on www.bromptonforum.net, see other pictures of this album to discover the weblinks. Read mainly: "Ten ways to boost its Brompton" (French): www.bromptonforum.net/t3984-bien-commencer-en-brompton#58155
My purposes: searching for the most efficient components and avoiding exaggerated costs (second hand, best quality/price ratio, no titanium bolts, no new light carbon crankset, no expensive cable housing ...). So through simplicity and efficiency, get first optimized mechanical results. Also achieve some personal handcrafted decorations: original engraving on metal and painted design, an occasion to practice the handcraft ...and through this project, learn technics and interact with other fans and friends... I hope this complies with the design and the thinking of Andrew Ritchie.
Contact Abeillaud: www.bromptonforum.net/u809
("Abeillaud" means "male bee", it's a french word fallen into disuse).
Below, I use the "official" vocabulary to indicate the Brompton's parts.
Look at the otther pictures of this album for close-up and details (follow #).
--------#1 THE WHEEL SET-----------------------------------------------------------------------------------------------
The best wheel set for a handsome Brompton, I think : Velocity AeroheaD rims (BSD 349) and double butted spokes Sapim Laser (2.0/1.5). It's an usual modification but this set includes only double butted (DB) spokes, even on the BWR hub. In my opinion wheelbuilding with 28 spokes for each wheel is the best choice. Sometimes seen on the front wheel, wheelbuiling with 14 or 16 spokes: I agree, it's has a particular look, but don't do that to optimize mechanically and to save only a few grams. Unfortunately, for an ultimate set, AeroheaD (weight 235 g and width 20 mm) is not longer produced since end 2011 and is replaced by Velocity A23 rim (fortunately with similar characteristics, 255 g/23 mm), same fate for the Velocity AeroheaT rim (285 g/24 mm).
Conclusion: a very good mod for more rigidity, lightness (rotating parts) and finaly to improve the general quality.
For me, the first meetings with great Brompton fans on the occasion of a group purchase that I organised.
More info on the wheelbuilding and the material, with tutorial: www.flickr.com/photos/69214402@N04/6601032339/in/photostr...
--------#2 REAR HUB-------------------------------------------------------------------------------------------------------
My three favorite rear hubs on a Brompton: BWR (6-speeds), SRAM (6 speeds) and 2-speeds Brompton but this one with industrial quality bearings (SKF by example)
More info about the 2-speeds bearings: www.bromptonforum.net/t3964-remplacement-des-roulements-s...
The 3-speeds Brompton hubs (SRAM or Sturmey Archer) are not interesting, if you consider actual 6-speeds versions. The 5-speeds Sturmey Archer is considered inefficient mechanically by some authors, it is also heavy and don't offer net benefits compared with 6-speeds versions. And the 8-speeds existing hubs (Nexus, Sturmey Archer), for only additionnal 2 speeds, don't respond to my above quality criteria: reasonable weight, small volume, low mechanical friction, perfect wheelbuilding. And even not the 11-speeds Shimano and the 14-speeds Rohloff for the same reasons on a Brompton bike.
My use: I prefer the SRAM hub and a crank between 37 and 42/46 teeth when rambling with a loaded bag on roads with altitude. The SRAM provides for me advantageously a smaller range than the BWR. I like pedaling at a rate between 80 and 90 rpm at any speed. The BWR has a range too large and the gear is either too small or too often. When you pedal with this configuration, the speed is between 6 and 32 km/h. For a rambling on flat roads, I use now only the 2 speed rear hub with a bigger crank, for more pleasure and efficiency than an internal gear hub.
-------#3 FRONT HUB---------------------------------------------------------------------------------------------------
The quality of the bearings and flanges are greatly improved with this "Phil Wood front hub special Brompton", here version small flange (Phil Wood ref. # VBE400, model made before 2011, bearing NSK ref. 6901, 150g with bolts). A masterpiece. Saddly, the model currently on sale ( ref. # VBF400, model made since 2011) has an unnecessarily oversized bearing (ref. 6001) and weighs 75 g more, but different beautiful colors are available.
The only other front hub which I consider as a high quality part (it is not a "standard" front hub but a generator hub): SON XS Schmidt Maschinenbau.
Project: customized complex patterns made by a laser etching on a Phil Wood hub.
More info on 'standard' front hubs for Brompton: www.flickr.com/photos/69214402@N04/6601345309/in/photostr...
-------#4 CHAIN-------------------------------------------------------------------------------------------------------------
SRAM 10-speeds 3/32" chain (not the original), it must be remplaced by a Shimano HG 3/32" chain because the sprocket on BWR and on 2 speed-rear wheel are Shimano HG (so to improve the chain jump): www.bromptonforum.net/t4606-le-pedalier-et-son-boitier-am...
-------#5 CRANKSET and BOTTOM BRACKET---------------------------------------------------------------------
A great mod suggested by a Bromptonforum member (Thanks Stéphane): Octalink crankset with a single chainring (here a FC 7700 with the original 53T), but above all Shimano Dura ace BB 7700 Octalink bottom bracket. Refined, classical look, pure quality: a real masterpiece set. You can get it for the same price as the Brompton parts if you rummage a bit.
More info and tutorial: www.flickr.com/photos/69214402@N04/6600998031/in/photostr...
Some technical informations translated in english: www.bikeforums.net/showthread.php/809974-The-Brompton-cha...
-------#6 SPROCKETS (PROJECT)-----------------------------------------------------------------------------------
The original must be replaced by Dura Ace or Ultegra quality , keeping the same sizes .
-------#7 CALIPER BRAKES-----------------------------------------------------------------------------------------------
A good modification suggested by a bromptonforum member. (Thanks yet Stéphane!): Shimano BR-R600 (Ultegra quality) with a special reverse pulling (machined cable stops, tailor-made), front and rear (the port of the bag is possible). Project: improve the system to obtain an operational quick release! A few "do-it-yourself" but no more expensive than the original Brompton set. Not longer produced (yet available in NOS) but replaced by a new similar long reach model -> quick release possible when the rubber brake pads is a little worn.
More info and tutorial: www.bromptonforum.net/t2639-atelier-cycles-a-ixelles#68335
Stainless steel pieces are specially made for this mounting (made by Stéphane): www.flickr.com/photos/abeillaud_bromptonforum/7178774892/... and www.flickr.com/photos/abeillaud_bromptonforum/7178774594/...
-------#8 SUSPENSION--------------------------------------------------------------------------------------------------
Kamoya's Jenny suspension (Thanks Ian and good blossom viewing party in Japan):
The Jenny suspension consists of a spring and an elastomer. There are three hardnesses for the elastomer. I use the softest usually but on some occasions one of the two tougher . Perhaps the combined effect of the spring and elastomer limit the pumping effect during the compression phase.
Jenny suspension has replaced the "firm" elastomer Brompton (that was used usually) and the very firm green elastomer Birdy (that was used occasionally in race).
-------#9 SEAT POST-------------------------------------------------------------------------------------------------------
Brompton titanium seat post (not longer on sale since few years even on models X) however the most important titanium part to improve the comfort on a Brompton bike. The rear frame and the fork are made of steel. The additional budget required for titanium X version (~500euros) can be devoted to other modifications, including improved bearings (headset, bottom bracket, front hub), That seems a better investment! And to... some original handcrafted parts for a greater pleasure. :-)
-------#10 POSTKEEPER-------------------------------------------------------------------------------------------------
Postkeeper Kamoya on this titanium seat post (not visible here because inside frame). Possible purchase only in Japan but can be relatively easily constructed in a piece of brass, if you are equipped. Instead, you can wrap the seat post with chatterton but no automatic right-left orientation when you unfold in this case, only a top-down fit.
More info and tutorial: www.flickr.com/photos/69214402@N04/6575282821/in/photostr...
-------#11 SEAT POST (PROJECT)------------------------------------------------------------------------------------
Project: customized titanium seat post with integrated saddle clamp (which allows the offset) and handcrafted engraving . To get a better quality than the Brompton titanium part (strength and finish).
Since march 2013 : titanium seat post with integrated saddle clamp (without offset) made in Taiwan, no name given by the seller. Looks like the Element 22's seat post shown here : farm8.staticflickr.com/7152/6564639879_3a04aae634_o.jpg
More info : www.bromptonforum.net/t3288p60-tige-de-selle-titane#68959
-------#12 GEAR CABLE ANCHORAGE-------------------------------------------------------------------------------
This Sturmey Archer anchorage must be replaced by a SRAM anchorage (this one is easier to fix). A suggestion of Arnaud, mechanician in the attractive shop "La maison du vélo" in Brussels, a great Brompton bike geek!
-------#13 HINGE CLAMPS PLATE-----------------------------------------------------------------------------------
These "Kamoya Finger Clamps" are very useful due to their asymmetric shape. More, an ingenious home made stop system for the unscrewing makes it even easier folding and unfolding, better than the simple lock nut, it allows to keep the original bolt and it's more effective. Pay attention, it's marked on the screw head: the original bolt is a "8.8" industrial quality ! So do not replace this one by a standard quality.
Read on "Bromptontalk Yahoo Group", the response (copy) of Andrew Finkill, "technical support" at Brompton Ltd (we're lucky, Brompton's customer service is very reactive) to a Brompton user (I don't know if about "Kamoya" or "Brompfication" products, there is nothing written about): "Im afraid we have no plans to use the style of hinge clamp that you refer to, this style of clamp reduces the area of contact between the hinge and the clamp and as such results in a less secure clamp." At least, this response can not be applied to the "Kamoya Finger Clamp", check so the two parts, the Kamoya and the Brompton original! (source: sports.groups.yahoo.com/group/BromptonTalk/message/81018 and also there: www.bromptonauten.de/phorum3/read.php?1,9735,page=2 )
A. Finkilll probably speaks about this type of process published in "A to B" magazine (88, Feb 2012, p.26-27) described as a "Brompton innovation" and proposed by Derek Cranage. We can read: "The lower hinge clamp plates is slightly chamfered"...and a locknut is on the original screw: "(for reason of space this is an ordinary nut with a crushed slit on one side)..." Not the most elegant solution indeed.
More info about the bolt's quality for this part (discussion French/english): www.bromptonforum.net/t3619p40-charnieres-et-roulettes
More info and tutorial: www.bromptonforum.net/t3184p180-charniere-rapide-japonais....
-------#14 HEADSET-------------------------------------------------------------------------------------------------------
The third part of this alternative trilogy: Shimano BB 7700 for the bottom bracket, Phil Wood with NSK bearing for the front hub and this "Chris King Gripnut 1-1/8" headset.
-------#15 CABLE HOUSING----------------------------------------------------------------------------------------------
Without "Brompton cable gatherer", of course. So the cable housing in one piece to prevent water infiltration. All cable housings are BBB product, just standard product and it works very well. Here just a "Colson" to maintain together the cable housings.
-------#16 CABLE GUIDE (PROJECT)-------------------------------------------------------------------------------
Project: cable guide on frame. Not so easy to tune! I have seen only on picture an attempt on a modified Brompton by Leonard Rubin: www.bromptonforum.net/t2448-len-rubin-s-superbrompton
-------#17 BAR---------------------------------------------------------------------------------------------------------------
The original flat bar (S version) has been replaced. The final bar has not yet been chosen.
-------#18 BRAKE LEVER EXTENSION----------------------------------------------------------------------------
Made by "Paul Component Engineering", called "Chimchim" or "Chimchims" (plural), these extensions for brake levers are a wonderful achievement (I use the version II with the Brompton levers). On the instruction paper, i's written: "Speed's little buddy, developed by pops in a top secret garage somewhere in northern california...". No longer produced (dated 1993-1994 I suppose), Paul wrote to me: ""Wow, that’s an oldie. I have no idea where you are going to find more of those".
More info and pictures: www.bromptonforum.net/t4139-extension-pour-poignee-de-fre...
-------#19 RIM TAPE-------------------------------------------------------------------------------------------------------
"Veloplugs" (Velocity product) replace the traditional rim tape (not visible here because inside rim). A luxury if you look at the price but why bother with a traditional rim tape when we worked so hard to achieve the best wheels for our Brompton bicycles ;)
More info: www.velocityusa.com/default.asp?contentID=555
-------#20 ENAMELLING (PROJECT)----------------------------------------------------------------------------------
Belgian flag stickers (for the BWC 2011): www.flickr.com/photos/69214402@N04/6601280995/in/photostr... Project: a customized painting (enamelling): a black frame with the belgian colours. Mat or glossy?
-------#21 CHAIN GUIDE DISC (PROJECT)--------------------------------------------------------------------------
An another part to craft.
-------#22 MUDGUARD BLADE/STAY and MUDGUARD ROLLER (PROJECT)--------------------------
A very lovely project, still secret: Customized mudguards with on rear, a crafted roller support.
-------#23 TIRE---------------------------------------------------------------------------------------------------------------
I use two types of tires (BSD 349).
Usually:
-"Schwalbe Kojak folding" with Schwalbe SV4 inner tube (85 g). The best actual tire for the Brompton, very good on all fronts. Its only flaw: it wears a bit too fast but the benefits largely supplant this disadvantage.
Very occasionaly:
- Even faster and lighter but not good on wet road: "Schwalbe Stelvio Light" folding (no longer produced) with, for the fun, a special and very rare Kenda 19-349 inner tube (65 g) (I guess so not longer produced for several years )
More info about this 19-349 inner tube: www.bromptonforum.net/t1108-chambre-a-air#57738
-------#24 SADDLE (PROJECT)-----------------------------------------------------------------------------------------
Saddle: Brooks Team Professional Cr.
Project: unique concession to a non-personal decorative part: maybe a "Brooks Team Pro Vans special edition" but rebuilt with titanium frame, indeed originally it's a steel frame: blog.brooksengland.com/wps/team-pro-vans-in-online-shop/
But first to get the final customized titanium seat post...
-------#25 PEDALS----------------------------------------------------------------------------------------------------------
Shimano M-520 SPD pedals (here illustrated, used when rambling, excellent value/price ratio). MKS FD-6 folding pedals (used when commuting), I think the best folding pedals (MKS FD-7 now produced, very similar).
Test now for rambling: Crank Brothers Egg Beater 1 (256 g/pair for ~30 euros, ~100 g saved)
More info about these folding pedals: www.bromptonforum.net/t1407p80-pedales-mks-detachables#47461
-------#26 HANDELBAR STEM CLAMP (PROJECT)----------------------------------------------------------------
First frame modification of this project: 2 fixing screws to maintain the bar and not only a single. To improve the binding. Also to install occasionaly a bullhorn handlebar (26.0 mm diameter) without an extension part.
-------#27 FOLDING STABILITY ON THREE ROLLERS (PROJECT)-----------------------------------------
In the folding position called "parking" (only the rear wheel folded), how to improve the stability on a L-model (Brompton without rear rack). There are two differents purposes: stability when you park you Brompton and when you move the Brompton almost completely folded in position "shopping" with the front bag on the bike.
Not so easy to tune an elegant, discret and practical accessory but certainly possible.
Some attempts shown on the internet but nothing yet perfectly achieved. More info: www.bromptonforum.net/t2346-4-roulettes-sur-un-modele-l-c... and here: www.bromptonforum.net/trucs-et-astuces-f2/remplacement-de... and yet: www.bromptonforum.net/t3790-nouveau-systeme-de-roulette, and cs205.xbit.jp/~w037139/11_60.html
-------#28 ROLLING STABILITY WHEN FOLDED (PROJECT)-------------------------------------------------
Test of this Kamoya's part: cs205.xbit.jp/~w037139/15_59.html
Not really convicted by this: farm5.staticflickr.com/4083/5054039548_b1208d436d.jpg
( Picture: 'lottgen' on Flickr, Steve Parry's realisation)
-------#29 HANDELBAR TUBE------------------------------------------------------------------------------------------
S-type for rambling, P-type for race (6,5 cm shorter, same angle)
-------#30 CHAIN DERAILLEUR TENSIONER -------------------------------------------------------------------------------------
Beautiful machined aluminium part made by Bikefun (Korea)
Pictures : farm9.staticflickr.com/8230/8582398901_f32a4fba45_o.jpg ; farm9.staticflickr.com/8230/8582398901_f32a4fba45_o.jpg ;
More info : www.bromptonforum.net/t5583-tendeur-de-chaine-aluminium
-------#31 NUTS ------------------------------------------------------------------------------------------------------------
Stainless steel to prevent rust in winter. "Pay attention to the smallest detail", Andrew Ritchie would not have denied this maxim.
More info: www.bromptonforum.net/t2535-c-est-quoi-donc-ces-ecrous
----------------------------------------------To follow as a good soap!-------------------------------------------------
Olivier
From Belgium
This saddle is a one off. There has never and will never be another. Originally, Brooks was going for red (possibly for one of the Special Edition polo saddles). It sat at ABR for awhile and then was raffled off for Val (Bikesmith) to Ryan who bought excessive tickets. He almost dyed it black! We let him know our interest in the saddle and eventually I traded a wheelbuild for it. It is truly the cherry on top of this incredible build.
1957 Carpenter #5071 Olympic Pursuit
24" seat tube, 75/72 head/seat tube angles
Reynolds 531
Airlite hubs in Fiamme rims 32/40
Williams B100 chainset 25/8T, 1" pitch 3/16 roller chain
Brampton pedals
BW Featherweight bottom bracket in Nervex shell
Brooks Sprinter saddle on Reynolds pin, Cyclo support.
Cinelli steel bars and stem.
(Stratalite Maes bars on Scheeren stem + GB Courier brake for t/t)
Restoration - Argos Bristol
Polishing & Replating - frame & hubs, by YB Plating, Crawley
Wheelbuilding - Petra Cycles Oxted.
Events: Occasional club 'tens', Lea Valley velodrome, Cronosquadre della Versilia 2016
Although wheelbuilding is the main thing at Wheelcraft, they also build, service and repair bikes of all types and supply any components you'd like. You want a new titanium bike with the best groupsets available? They can do that as well. Here Al and Sam are at work on wheels. Sam's cutting spokes on the Phil Wood spoke-cutting and threading machine. This is just the most wonderful and magic place any cyclist could wish to visit. Bike shops just don't come like this any more.
New pair of wheels for shopping bike - 1992 GT Karakoram.
Rear wheel Rigida (Ryde) Sputnik black 36 hole rim. Shimano Deore FH-T610 hub. DT Swiss D/B Competition on the NDS. DT Swiss P/G Champion on the drive side. Prolock brass nipples
Front wheel Rigida (Ryde) Sputnik black 32 hole rim. SP PV8 black dyno hub. DT Swiss D/B Competition spokes. Prolock brass nipples.
Bike #4, but first fully self-built bike. Wheelbuilding is surprisingly fun and relaxing. Most parts used/recycled except the hubs/spokes, saddle, and frame.
Frame: 53cm IRO Cycle BFSSFG group buy (Dedacciai steel)
BB: Shimano UN-90 68x107mm
Stem: SR Custom 100mm
Bars: random chop & flop
Headset: Shimano 600
Hubs: Nashbar high flange, double-fixed (120mm rear spacing)
Rims: Campagnolo Lambda Strada V ($30 for the set, couldn't believe my luck!)
Spokes: Wheelsmith 14ga
Front: 2-leading/2-trailing lacing
Rear: 3-cross lacing
Crank: Shimano 105 (170mm)
Chainring: unknown 42T
Cog: Dura Ace 16T
Pedals: Performance SPD
Brake: Tektro R310 dual-pivot
Lever: Dia-Compe
Saddle: Brooks B-17 Honey
Seatpost: Shimano 600
A few improvements still to be made, but a smooth, fast ride every time.
Great the sights you can come across at Wheelcraft, Clachan of Campsie. Big Al doesn't look too comfortable here. Maybe needs to adjust his seat or get longer cranks?
An original 1933 wooden rim, given a new coat of yachting varnish, and built up with a used Constrictor Viper small-flange, steel hub, and stainless steel spokes/ 1" spoke nipples. Total weight: 1080 grams.
Raleigh DL-1 Roadster: Restoration about finished! Here are the stats: project started February 6, 2009, finished April 4. Total cost of restoration only a little over $200. Hours of labor... ask my wife :)
Here is a breakdown, including where parts came from:
Handlebars, assorted brake parts (eBay) ... $44.00
Leather Grips (Nashbar)... $8.00
Cotters, Ball Bearings(Spokes, Etc)... $7.00
1/8 Chain (Spokes, Etc)... $15,00
Tyres, IRC 28 x 1-1/2 (Yellow Jersey)... $40.00
Tubes, Dunlop-Woods valve (Yellow Jersey)... $16.00
Rim Strips (Yellow Jersey)... $8.00
Gear Cable (Harris Cyclery)... $9.00
1 1/8” Pulley Assembly (Harris Cyclery) ... $5.00
Indicator Spindle (Yellow Jersey)... $8.00
Pump (Yellow Jersey)... $30.00
Reflector (Yellow Jersey)... $ 5.00
Crane Brass Bell (CycleLife)... $11.00
Miller Style Headlamp and Dynamo (Eastman Copy - Yellow Jersey)... $29.00
The grand total is $235. The Brooks Saddle and Acorn bag were from another bike I had so I didn’t count them as a cost of the restoration. The saddle is $136 retail and Acorn Bag is $46.00 (if you can get it... ordering takes a while but is worth the wait). Thanks for all the great comments. This has been a great winter project.
Wait... did I say finished? Check back for updates... I'm taking the wheelbuilding course at the LBS. Summer project: rebuilt wheels.
Big Al's Wheelcraft shop is doing brisk business in the early summer sunshine. This is a fantastic shop if you want old-style service and everything from a bespoke titanium bike to a good pair of wheels built. Al and his team will repair, rebuild, build any combination of wheels/hubs that are the best in the business. If you're lucky you might get a biscuit along with the free coffee or tea! Al's red 25in. bike can be seen propped up beside the window where he holds court, solves the world's problems, tells jokes, builds wheels, answers the non-stop telephone, fits headsets and bottom brackets, tells you what you need to ride across America or New Zealand and, occasionally, gets paid! Five star . . . and then some.
NEWS FLASH! . . . Big Al now has a website wheelcraft.net/ and he's on twitter! I can't believe it's really him. Where does he get the time? He can't be putting the miles in any more.
P.S. Al, a word of warning, remember what David Cameron said about twitter: ''I don't do twitter, two twits might make a tw@.''
This is a complete fully flamed F5Pista frame built up into complete 52cm bike. It radiates class with a set of awesome high polish components including a H+Son TB14 wheelbuild and ultra-compact racing drops.
Al in his usual position at the wheel jig of his Wheelcraft bike shop in Clachan of Campsie at the foot of the Campsie Fells.
most of the parts that were in the boxes from last year, fitted today just to see ''where exact we are'' as we say here in greece...i was curious to see the shape just before my eyes...need some work,a front brake lever '',rear wheelbuilding with the eadie coaster..but already my curiocity satisfied,with the correct tyres fitted the cycloe rack the lucas wd lamp and the rifle base......maybe will be totally ready in this winter????
A mostly bike related theme this month, with a few other things we couldn't resist adding in there.
by Harrell Fletcher and Miranda July
A beautiful book and project
With Associates letter
Cut by cutlasercut
Velo: Velo: Bicycle Culture and Design
by Robert Klanten
by Adrian Talbot
by Guy Andrews
Bespoke: The Handbuilt Bicycle
from Lars Muller Publishing
Topeak Alien II multi-tool
The best tool in the box / it is a tool box
If you have a bike, get one of these. Now. Go on. You're online, no excuses.
www.topeak.com/products/Tools/ALiEN_II
A chain whip
The oddest tool in the box
What is it for / how does it work?
Spokes and nipples
Tiny and bendy, it's amazing that component parts like these make up the firm structure that is a bicycle wheel.
Learn more from the legend Sheldon Brown
Illustrated by Nigel Peake and Designed by Roger Fawcett-Tang
Another useful tool to always have in your bag when on a bike
by Rob Van Der Plas
1988 version that was found at a bicycle jumble for £4.
Used as step in order to get up onto the table
And lets not get into any 'Eames copy' conversation here, yeah? Agreed.