View allAll Photos Tagged roller
Here are the rollers installed in the newly repaired roller hooks. I've temporarily put a rag under them to show off one of the other oddities of the Goldin's ink train.
If you look closely it appears the rollers aren't parallel and have slightly more space between them on the right side of the press than the left. This is not an optical illusion. The rollers are approximately 1/16" closer together on the left side.
This strange system was built-in by design at the factory. William Golding shows this design in his last patent (US 1,124,010), granted in 1915, just one year before his death. It was intended to cause the rollers to shift left to right just a bit during printing to act a bit like a distributor roller. This acts in concert with the bottom ink distributing plate to even out ink coverage as much as possible.
I haven't had the chance to test it yet, but it should be interesting.
Roller Dome (22,580 square feet)
4902 Williamsburg Road, Richmond, VA
This skating rink was built in 1965 as Skateland.
Roller Disco at Ridge Road Recreational Park in April 2023. Photos by Tony Ventouris and Ed Wondoloski.
Mountain Mayhem vs Magic City Rollers
Bout Hosted by MCR at the Billings, Montana Metra
March 11, 2017
My wife and I saw this guy walking a giant lamp shade, and the woman carrying a chandelier on the West Side. She was like: take a pic! So I did. Bonus: a couple of skate dancers from Central Park. Double Bonus: I found the light leak I knew had to be there.
Wiltshire Roller Derby presents Roller Derby Sevens at the Oasis Leisure Centre in Swindon on Sunday 11th November 2018. Teams Highworth Co-Op vs Heart in Hand.
The JamTarts take on the Infectios Crew during the Take Her Head Off Roller Derby match in Hobart. First time for me, I'm stunned. So Physical. So much pain. So much fun.
Magenta is prepared for any activity. She has frog boots for the rain. Fancy clothes for evenings out on the town. Roller skates for getting around town quickly. She even has bowling shoes. Her fashion sense & accessories are from Pipercat99.
Kherson oblast, Southern Ukraine
...but the Roller was much more cautious than the Bee-eater. It was flying around trying not to lose sight of me, producing its characteristic 'ruck-ruck' sound.
По-русски: сизоворонка, ракша;
українською: сиворакша, ракша.
2011-10-22
Bewitched: A Greensboro Roller Derby Double Header
-Elm Street Nightmares Vs. Mad Dollies
-Gate City Rollergirls vs Cape Fear Black Harrts
Nikon F3
Nikon Ai 105mm f/2.5 lens
Ilford HP5 (800-push) 35mm film
Kodak Xtol (1+1) developer
20ºC - 14.5min
this goes for any Vandercook, etc.
ink the press and allow it to run in. stop press, and roll the carriage forward to the middle of the press bed (and on 219, remove the steel distributor assembly).
on (this) 219, the rollers have 1/4" recessed slot head set screws, and 1/2" height adjustment screws on each end of the carriage. the center set screws must be backed-off before beginning adjustment.
start on the operators side, front roller, end.
crouching to sight the underside of the form roller, using the height adjustment gauge, bring the roller up or down via the corresponding screw to _just_ contact the roller. flip the gauge on its flat end, slide it under the front roller, and flip the barrel back on its side. pull it forward. you're looking for an 1/8" streak. adjust height via screw to achieve that streak.
move to the back roller end. do the same.
move to the opposite side of the press. same drill.
move the gauge to the center and check again, front and back form roller.
set the set screws.
make a full rotation through each check to double-check.
all good? drop distributer carriage back in place.
put a form on press, ink it and pull a proof.
you checked the press packing first, right?
This picture was taken at an oval next to Lakeside Stadium in Sunbury.
It is an old roller used to lay down roads and paths.
We are giving away the Bikernet/Cycle Source Magazine 15th Anniversary chopper sponsored by XPress Lid and Spectro Oil. You can read about the build on the pages of Cycle Source Magazine and online at www.Bikernet.com. Come to the 12th Annual Las Vegas BikeFest on September 27-30, 2012 and you could ride this custom chopper home.
To win the chopper sign up at:
www.bikernet.com//pages/custom/subscription.aspx
So there’s talented crew of Ron Harris of Chop Docs and Gary Maurer of Kustoms Inc. building this radical chopper
But wait, who the hell is that title sponsor? We are very fortunate to have Spectro Oil and this coffee company sponsor our build. XPress is a custom French Press coffee cup lid technology, by Smart Cup. Have you heard of French pressed coffee? Well, Smart Cup designed a portable cup that makes a French pressed cup of strong Joe whenever you want it. Over the months ahead, we’ll show you how it works and delivers a superior cup of crushed beans on the go.
Product sponsors for the Bikernet/Cycle Source 15th Anniversary Giveaway Chopper include 3 Guyz, ACCEL Motorcycles, Aeromach USA, Bare Knuckle Choppers, Barnett Clutches, Bell Helmets, Biker’s Choice, Crazy Horse Motorcycles, D&D Performance Enterprises, Evil Engineering, Fab Kevin, Grip Ace, Handy Industries, Hawg Halters, Las Vegas Bikefest, Metzeler, Ridewright Wheels, Rivera Primo, Rocking K Custom Leathers, Spectro Performance Oils, Texas Bike Works, Wire Plus and XPress Lid by SmartCup.
The Golding was used as a die cutter before we got it. This was because the inking system was damaged at some point. Among other problems, three of the six roller hooks had become bent and wouldn't hold the rollers.
Here, I'm heating one of them so I can re-form it. I'm happy to report that all three rollers mount fine now.