View allAll Photos Tagged preordering
I couldn't wait for the September North American release, so I preordered the steelbook from Taiwan, which is being released June 26. Strange that there's a 3 month delay for us, especially when our blurays are the same region format...
My pre-ordered Ariel and Ursula Gothel Doll Set. The slipcover has been removed and placed next to the dolls in their unopened display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
After a hectic six weeks of too much travel, too little sleep and too much work, including the headaches of tax returns, it is nice to get back to Flickr.
Over this time, I managed to make one photography-centric field trip during which I had a chance to test a Panasonic Lumix S1R camera with a few different M mount lenses.
When I first got my hands on a Panasonic S1R before its official launch, I was pretty excited by its potential for using with M mount lenses. I previously posted some thoughts on this on after taking some test shots at a local dealer on March 30th – click image below for details. So I preordered one.
My real-world results with my own S1R were somewhat mixed, with some good things and some not so good things. In the end, after flip-flopping a few times, then deciding to keep it, I made yet another U-turn, and finally decided to send it back.
The S1R is a very capable camera, albeit with some issues. It probably delivers good results with the L mount lenses. I did not test it with any of the Panasonic, Leica or Sigma L lenses. I already have a neck-deep commitment to Sony, so I have no interest in building up another system around the L mount.
My interest in the S1R was strictly to check if it could deliver better results than my Sony M cameras could when used with M mount lenses. From this limited perspective, owning an S1R did not make sense for me.
So with that preamble, here are the things I didn't like about the S1R.
First, the S1R still has acute ray angle issues. Apparently, the sensor cover glass plate is too thick, and whatever micro lens array they slapped over it is not good enough. So my primary reason for acquiring an S1R was not met.
Interestingly, it is a different kind of problem in the S1R from the Sony A7x cameras. In the Sony cameras, the glass plate is too thick and the IQ simply falls off a cliff as you move away from the center. The fall off is so bad that if you place your subject away from the center, it actually gets harder to focus, and as you approach the corner, the image looks so fuzzy that you can't even focus properly.
In the S1R, you can actually place your subject away from the center, even in an extreme corner, and see enough contrast and sharpness to focus pretty precisely. Problem is, that totally destroys the sharpness at the center. So it is still better than a Sony A7x, but no "corner to corner sharpness wide open".
As a result, you can't reach across-the-field sharpness with the Zeiss 35mm f/1.4 Distagon ZM until f/5.6, the Leica 28mm f/1.4 Summilux-M until f/8, and never with wider lenses. Beyond f/8, too much sharpness is lost to diffraction: I got terrible results with my Leica 21mm Summilux-M and 18mm Super Elmar-M. Even with 50mm lenses, it takes about f/2.8 or even f/4 to get good micro contrast in the corners. No issues with the Leica 90mm APO Summicron-M, though.
Sure, these results are better than what is possible with Sony A7x cameras. But it makes no sense to spend a whopping $3,700 (highly unsustainable, IMO) to buy a sub-optimal solution to a problem.
So as of right now, I still don't have a good solution for my M lenses. But there are rumors that Leica is finally planning to offer an M camera with an EVF, something Leica should have done ten years ago. I think it is inevitable, and if that were to happen, that would indeed be the best camera for M lenses. Another reason to not buy an S1/S1R.
The single most compelling new feature in the S1 and S1R is the multi-shot high-resolution mode that can produce a 187 MP image from the S1R. When exposed properly, and with the right static subjects, the results are really impressive, and compare well medium format cameras in terms of resolution, although not match 16-bit dynamic range.
But we live in a world of monkey-see-monkey-do, and this high res mode will surely be offered all future high-end mirrorless cameras within the next 1-2 years, including the Sony A7RM4. Since I am heavily invested in Sony, and I am pretty certain of upgrading to an A7RM4, I might as well wait a bit. The A7RM4 will likely have a baseline resolution of 60 or 72 MP, and with the high res mode, I could probably get 200+ MP files!
But apart from that one exciting and really innovative new feature in the S1R, there are a number of issues with the S1R that provide ongoing irritation every time you use the camera. In no particular order, here are some of them:
Although I have always wished the Sony FE cameras were just a little bigger, the S1R is way too big and heavy compared to the A7R III or A9. Maybe Panasonic had to make it that big to support the high-res multi-shot mode, I don't know. But for a mirrorless, it feels like lugging around a Nikon/Canon DSLR.
In spite of Live View, movable loupe and focus peaking in a dozen colors, manual focusing in the S1R is much harder than with a Sony A7x. I had way too many images that looked like they were focused accurately in the field, but later, on my computer, showed that I missed my target focus.
With my Sony A7x cameras, I am used to a wireless remote controller for shutter release, which assures that I don't disturb the camera after focusing. When you have a difficult focusing situation, it is easy to lose the best focus while pressing the shutter release button. The S1R has no remote control or cable release (self-timer is not an adequate solution for critical focusing).
Even while using the "intelligent" Leica L-to-M adapter, which has electronics built into it to allow the lens to communicate with the camera, every time you mount a new M lens, you have to manually dial in the focal length of the lens in the S1R. Why can't the camera know at least the focal length of the lens? As if that is not irritating enough, every time you turn on the camera, it asks a question whether the currently set focal length should be used or changed. That is REALLY irritating. If you make a mistake, the camera puts out the wrong focal length in the EXIF file. That is really ridiculous.
The battery on the S1R drains very fast. Panasonic threw in an extra battery and a grip as freebies at introduction (which I got). But it is still not a good solution – the charger for the battery comes in two pieces, one that connects to the 110/240V AC mains, the other that connects to the camera with a USB cable, and a USB-C cable that connects the two pieces. It makes no sense for such a clumsy charger. It also takes a VERY long time to charge the battery. I have medium format batteries that are bigger and have higher capacity, and they charge to 100% in a fraction of the time it takes for the Panasonic batteries to charge. An extra battery is practically not very useful, if each battery takes all night to charge!
Lastly, the $3700 price is out of line and very unsustainable, in my opinion. With a Sony A7R IV and a high res Canon RF, and a new model of the Nikon Z7 on the horizon within the next 12 months, I think there's a 10-15% downside to the price of the S1R. Another reason to not rush into it.
One final comment: I did not test the S1R with any of the L mount lenses, from either Panasonic or Leica. I never had any intention to buy any of these lenses anyway, but serious reviews of these lenses (not reviews by coin-operated shills on YouTube) lead me to believe the Leica L lenses are way over-priced for what they deliver, and simply not very good in many cases. The Panasonic 70-200mm f/4 seems to be a very fine lens – it could be a very nice lens for landscape photography with the multi-shot high res mode. The Panasonic 24-105 f/4 kit lens is mediocre.
I think Sigma will be a huge winner, once Sigma puts out a series of L mount Art lenses. Then there will be some serious optics for the L mount.
I would be very interested in a Sigma full-frame Foveon camera in the L mount. That is something I would be very tempted to buy, and yet another reason for me to not get the Panasonic S1R, or the inevitable Leica SL Mark II with the 47MP sensor.
Some photos shot with the S1R + M mount lenses follow.
Hope the info above is useful...
My pre-ordered Peter Pan and Captain Hook Doll Set. The slipcover has been removed to reveal the dolls in their display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
Photos of my Anna and Elsa juice glasses and glass mugs by Arribas. I purchased them at the Crystal Arts shop on Main Street in Disneyland. They are identical in design and price to the ones available online at DisneyStore.com, except that these have the Disneyland logo rather than the Walt Disney World logo. The 6 oz juice glasses are $8.50 each, and the 10 oz mugs are $12.50 each. The etchings are well done, these drink-ware have thick bases, and are surprising heavy. A negative is that the mugs have a pronounced mold line down the middle of the handles, and all around to the other side. Also, next to some of the other Arribas glass drink-ware on display at the Crystal Arts shop, these items are a little plain. Some of the other glasses have full color artwork, and embedded jewels. But I think they are very pretty, and well worth the price.
Depending on the lighting, the etchings show up as either negative or positive images of Anna and Elsa. When back-lit, the etchings turn dark, and look like normal images of the Frozen sisters. When front-lit, the etchings turn bright, and look like negative images of the characters. In some of these photos, I've placed the glassware in front of images from the lithograph set that come with preordering the Frozen Blu-ray/DVD combo from the Disney Store.
It's my new girl! Byul Paradis! I've wanted her for so long, so I'm so happy to finally own her. I almost preordered her two years ago, but opted to buy Rikke instead.
Her name's Paradise Harlem Anvil, she talks with a stutter and, when I can buy one, will have a wheelchair.
Excuse the crappy Kindle photo; I couldn't wait to share her with you :D
omg cheesy-as-fuck title aside, i've been very much caught up in the cruel cycle of the news world. I doubt I really have one day where I don't think that my day will be ruined/changed because of anything that might crop up.
but that aside, i've been very much alive and well, though a little on the poor side because i've been spending money like water. :o don't even ask why.
anyway! taylor swift's cd is out, i bought that. i preordered mcfly's new album that'll be coming in a couple of weeks...
and taylor swift's coming to singapore.
OH MY GOD.
& I bought tix. MUAHAHAHHAHAHAHAHAHAHAHAHHAHAAHAHAHAHHAHAHAHAHHAHAhAhAHAHHAHAHA.
/hyperventilating
It's like a dream come true. I've been wanting to go to her concert for like, ever!!! I wished it wasn't so expensive though. :(
Don't you love the bears though? :D
xx
People call it the “crown jewel” of the Oregon State Parks system, and once you visit, you know why. Silver Falls State Park is the kind of standout scenic treasure that puts Oregon firmly onto the national—and international—stage. Its beauty, boundless recreational opportunities and historic presence keep it there. Nestled in the foothills of Oregon’s Cascade Mountains, less than an hour east of the state capital of Salem, Oregon, the sprawling 9,200 acre property is the largest state park in Oregon, and one of the most popular.
Waterfalls: Where else can you walk behind a waterfall? Check out the famous South Falls and see what a 177-foot curtain of water looks like from behind. It’s part of the Trail of Ten Falls, a spectacular, nationally recognized hiking trail that weaves through a dense forested landscape. The trail passes a series of breathtaking waterfalls along a rocky canyon, and descends to a winding creek at the forest floor. This 7.2 mile loop is considered to be a moderate hike, with an overall elevation change of 800 feet. Several connecting trails with separate access points make shorter routes. For everyone’s safety— absolutely no pets.
Boots, bikes, paws, hooves: The park offers more than 25 miles of backcountry trails for mountain biking, hiking or horseback riding. The trails are lined with lush vegetation and remnants of old-growth forests. Wildlife is abundant. Bears and cougars live in the more remote park areas.
Daytime activities: The South Falls Day-use area has spacious lawns, barbecue stands, picnic shelters, tables, a playground, horseshoe pits, an off lead area for dogs, and a charming creek. Ever since the opening day in 1933, visitors have been using these grounds for potlucks, family reunions and weddings, all within a short walk to view the famous 177-foot South Falls.
Overnight: The main campground has tent sites, RV spots and cabins. Bring your horse and stay in the horse campground. If you need an area for many people, the park also has group tent and RV camps, dormitory-style bunkhouses (each Ranch sleeps 75) and the historic Youth Camp for up to 250 campers.
The Silver Falls Lodge and Conference Center offers a variety of amenities for all visitors to the park. Relax and enjoy comfortable lodging within the wooded setting, or feast at the many catered specialty events. Enjoy a preordered meal at the historic dining hall or order a box lunch to take on a hike or to your campsite. They also specialize in hosting special events! For more information please visit silverfallslodge.com or call 866-575-8875.
My pre-ordered Ariel and Ursula Gothel Doll Set. The slipcover has been removed and placed next to the dolls in their unopened display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
My pre-ordered Rapunzel and Mother Gothel Doll Set. The slipcover has been removed and placed next to the dolls in their unopened display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
I preordered one of Gray Finney's puzzles before the house party - just as well, as they caused quite a stir and I imagine he sold out pretty fast.
This kingfisher print has been transferred directly onto the wood, so there's no paper to bubble or lift. The 148 piece puzzle has a guide picture on the clear acrylic box to show you what the picture is, but it isn't the complete print. There are a number of deceptive cutting techniques, including edges which look as if they have piece connectors, and there are at least 3 multi-piece figurals - can you spot the fish on the reverse, to the right of his signature piece, a hedgehog?
People call it the “crown jewel” of the Oregon State Parks system, and once you visit, you know why. Silver Falls State Park is the kind of standout scenic treasure that puts Oregon firmly onto the national—and international—stage. Its beauty, boundless recreational opportunities and historic presence keep it there. Nestled in the foothills of Oregon’s Cascade Mountains, less than an hour east of the state capital of Salem, Oregon, the sprawling 9,200 acre property is the largest state park in Oregon, and one of the most popular.
Waterfalls: Where else can you walk behind a waterfall? Check out the famous South Falls and see what a 177-foot curtain of water looks like from behind. It’s part of the Trail of Ten Falls, a spectacular, nationally recognized hiking trail that weaves through a dense forested landscape. The trail passes a series of breathtaking waterfalls along a rocky canyon, and descends to a winding creek at the forest floor. This 7.2 mile loop is considered to be a moderate hike, with an overall elevation change of 800 feet. Several connecting trails with separate access points make shorter routes. For everyone’s safety— absolutely no pets.
Boots, bikes, paws, hooves: The park offers more than 25 miles of backcountry trails for mountain biking, hiking or horseback riding. The trails are lined with lush vegetation and remnants of old-growth forests. Wildlife is abundant. Bears and cougars live in the more remote park areas.
Daytime activities: The South Falls Day-use area has spacious lawns, barbecue stands, picnic shelters, tables, a playground, horseshoe pits, an off lead area for dogs, and a charming creek. Ever since the opening day in 1933, visitors have been using these grounds for potlucks, family reunions and weddings, all within a short walk to view the famous 177-foot South Falls.
Overnight: The main campground has tent sites, RV spots and cabins. Bring your horse and stay in the horse campground. If you need an area for many people, the park also has group tent and RV camps, dormitory-style bunkhouses (each Ranch sleeps 75) and the historic Youth Camp for up to 250 campers.
The Silver Falls Lodge and Conference Center offers a variety of amenities for all visitors to the park. Relax and enjoy comfortable lodging within the wooded setting, or feast at the many catered specialty events. Enjoy a preordered meal at the historic dining hall or order a box lunch to take on a hike or to your campsite. They also specialize in hosting special events! For more information please visit silverfallslodge.com or call 866-575-8875.
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
So nude Elyse arrived today, before the one I preordered, since I am about to pay for her and Annik today.
Nope, I do not feel her red lips, like at all. I need something more cheerful for her - refer to the next photo :)
I preordered an Integrity Toys Homme body on their direct store and decided to buy their Dynamite Girls "Black" body cuz hey it was half price (IT said they would receive the body late Jan but I’ve heard nothing yet). From what I saw online A Tone was usually IT’s second or third most dark skin tone so I hoped I could articulate one of my painted body dolls.
Unfortunately, it’s nowhere near the skin tone of my vintage Live Action Christie.
It’s closer to the Grace/Kara skin tone (Afra and light black) but it’s a lot less orange.
In the end I chose to put my late 70s/early 80s Malibu Christie on here since she has the same issue with being too grey for modern dolls. My Pink N’ Pretty Christie from 1981 is the exact same skin tone so I guess IT (light) A-tone would match the 80s AA mattel dolls.
Waiting at the south end of Main Street for the opening ceremony. Sleeping Beauty Castle in the distance.
I went with a fellow Disney collector to the 24-Event that kicked off the official Disneyland Resort 60th Anniversary Diamond Celebration. It started on May 22, 2015 at 6 am and ended on May 23, 2015. However, we were only in DLR on May 22 until about 10 pm, being in the Parks for about 16 of the 24 hours.
We left the Hilton Anaheim Hotel at about 2:15 am, walked through Downtown Disney District and arrived at the security checkpoint for DLR at 2:30. The line was relatively short and quick, so we felt pretty good that were there early enough to get in near the head of the line. However, this was quickly dispelled when we saw how many people were in the entrance plaza between Disneyland Park and Disney California Park (also called the Esplanade). Rather than being allowed to line up in front of Disneyland Park, we were escorted to the other side of the plaza, to the shuttle bus area. There were many thousands of people there, in multiple long lines that stretched the length of the shuttle parking area. It reminded me of the lines outside the Anaheim Convention Center for the D23 event that I attended in August 2013. There was a Japanese TV crew roaming the lines broadcasting images of the crowd. At about 4 am, the lines started moving, and we finally entered the park at exactly 5 am.
We entered Main Street, waiting for the start of the celebrations at 6 am. Some stores were already open. In particular, there were very long lines formed to enter the Main Street Emporium. Only the south doors were open, trying to make the entry more orderly. It turned out that the people in line were trying to get the 24-hr exclusive merchandise, especially the LE pin of Dopey. We decided to wait by the flag pole at the center of the Main Street south plaza, which afforded us a good view of the Castle. The US and California flags were raised at sunrise, about 5:30 am.
They kicked off the celebrations at 5:55 am with a short burst of fireworks, followed by Disney movie music. The first song was A Dream is Wish Your Heart Makes, from Cinderella. The crowd on Main Street was then allowed entry into the other Park attractions, and we slowly started moving down Main Street. An overhead camera on a long boom recorded the crowd as it passed by. We passed close to the Castle, and turned into Tomorrowland. Our first stop was Buzz Lightyear Astro Blasters. My friend got more than 750,000. I got more than a million, but my score wasn't recorded, so I didn't get on the leader board. We wanted to get something to eat next, but every place that served real food had very, very long lines. So we settled on getting pretzels and slurpees. There was a piano player playing ragtime music as we ate. Later he left and a piano tuner came and started tuning the piano, which I've never seen before at Disneyland.
We visited some of the shops on Main Street, and noticed that many of the items that were available exclusively at the Diamond Celebration Merchandise Event (May 20-21 at the Disneyland Hotel) were now being sold to the general public. At the Crystal Arts shop, we saw the same diamond shaped glass paperweight that we got at the event. Except that there was no dates etched on the surface. We were surprised that they also had two larger sizes of the diamond, one about twice as large (6 inches) and another about twice that again (12 inches). The small 3 inch diamond was $40, the medium $250 and the large was $2150. They are all very impressive in person, and the large one is massive. It is also limited edition. The one displayed in the front window of the store was labeled 1/60, which I didn't notice until I looked at the photos that I took.
We then did several more rides, including Indiana Jones, Pirates of the Caribbean, and Haunted Mansion. Above the entrance to the Pirates ride is a sign for the Dream Suite, which used to be the Disney Gallery, before it was moved to Main Street, next to Disneyana. One of the prizes in a sweepstakes being run during the Diamond Celebration is a stay at the Dream Suite.
We then split up. I did some more rides, including a second go at Buzz Lightyear. This time my score was recorded, and I got the #5 high score of the day. My favorite place to eat at Disneyland, Plaza Inn, had a very, very long line waiting outside. So instead I ate lunch at the Pizza Port, which had a short and quickly moving line. They had an Avengers inspired menu of desserts. Next store, there was an exhibit for the currently running Tomorrowland movie. I also did some rides in Fantasyland that I have not done in a long time. Snow White's Scary Adventures was great fun. I touched the golden apple at the entrance to the ride, which generated cackling and evil words from the Old Hag. Next was Alice in Wonderland, which has new very nice animated sequences that integrated nicely with the animatronics. The ride wait time was posted as 60 minutes, but it only took me 30 minutes to get on the ride.
I started browsing the 60th Anniversary merchandise in various shops on Main Street. The Showcase shop was entirely devoted to 60th merchandise. Since some fellow collectors were asking about the rotating castle diamond shaped globe, I took a good look at it and took photos. Unfortunately, none of them had working batteries, so I couldn't see the castle rotating or lit up. Next I went to Disneyana, where they had many of the items that were offered during the Diamond Celebration Merchandise Event that I attended on May 20, including most of the limited edition items. They also had the $28,000 crystal slipper that was the grand prize of the Diamond Celebration Sweepstakes. It didn't look as impressive as I was expecting. It didn't help that it was all alone in a large glass case, without any identifying or promo placards. In the Ink & Paint booth there was a framed copy of the Diamond Celebration Tink Cel, with signed postcard and pin. I had preordered a copy of this exact same item, but the pin wasn't ready in time, so it will be shipped to me later. It is called "The Happiest Place on Earth", is limited to 1000 copies, and has a hand drawn Cel of Tinker Bell floating above a stylized map of Disneyland. The Tinker Bell pin is LE 750.
Next I entered Disney California Adventure Park (DCA), to meet up with my friend for dinner at 5:30 pm. I passed Carthay Circle Restaurant, which is extensively decorated for the Diamond Celebration, as the DCA counterpart to Disneyland Park's Sleeping Beauty Castle. The dessert for dinner consisted of four different small individual desserts.
Then at 7:30 we lined up to get a good spot for the World of Color show. It started at 9 pm, and lasted about 22 minutes. It was entirely redone, with Neal Patrick Harris and Mickey Mouse as the hosts. It was funny seeing the giant Mickey face on the ferris wheel being replaced by a screen, then the same image Mickey being projected onto it. The show was really entertaining. I liked the selection of movies that were presented. Snow White and Frozen had the most time allotted. They played almost the entire "Let It Go" scene, which looked and sounded great. The crowd cheered loudly when a brief glimpse of BH6 appeared. They also showed brief clips of Wreck-It Ralph, and had an image of the live action Cinderella in her ball gown that flashed on the water screen for a second or two. Then they had brief images from some popular DL attractions. Finally they had Walt Disney speaking a final message, which was very touching. I would say that this version is much better than the previous version. Neal Patrick Harris was a great choice as the host.
We then viewed the DL fireworks from just inside the entrance to DCA. We then split up again. I was disappointed that DL was at capacity, so they wouldn't allow me back inside. I had wanted to see the new Paint the Night, which is an updated version of the old Electrical Light Parade, which was one of my favorites when it was still being performed in DL and DCA. I am looking forward to seeing it in the near future. So I went back to my hotel room, and rested up. I only did 16 hours of the 24 hour event, but I felt very good about what I did experience.
In anticipation of preordering Bianca Pearl, i wanted to "test" out JunieMoon as a dry run on their checkout procedure. So i chose a few cute little items which I am delighted with. They arrived in a HUGE box, which i paid dearly to ship.
Main Street - Showcase Store. Closeup of Rotating light up castle diamond globe. $120.
I went with a fellow Disney collector to the 24-Event that kicked off the official Disneyland Resort 60th Anniversary Diamond Celebration. It started on May 22, 2015 at 6 am and ended on May 23, 2015. However, we were only in DLR on May 22 until about 10 pm, being in the Parks for about 16 of the 24 hours.
We left the Hilton Anaheim Hotel at about 2:15 am, walked through Downtown Disney District and arrived at the security checkpoint for DLR at 2:30. The line was relatively short and quick, so we felt pretty good that were there early enough to get in near the head of the line. However, this was quickly dispelled when we saw how many people were in the entrance plaza between Disneyland Park and Disney California Park (also called the Esplanade). Rather than being allowed to line up in front of Disneyland Park, we were escorted to the other side of the plaza, to the shuttle bus area. There were many thousands of people there, in multiple long lines that stretched the length of the shuttle parking area. It reminded me of the lines outside the Anaheim Convention Center for the D23 event that I attended in August 2013. There was a Japanese TV crew roaming the lines broadcasting images of the crowd. At about 4 am, the lines started moving, and we finally entered the park at exactly 5 am.
We entered Main Street, waiting for the start of the celebrations at 6 am. Some stores were already open. In particular, there were very long lines formed to enter the Main Street Emporium. Only the south doors were open, trying to make the entry more orderly. It turned out that the people in line were trying to get the 24-hr exclusive merchandise, especially the LE pin of Dopey. We decided to wait by the flag pole at the center of the Main Street south plaza, which afforded us a good view of the Castle. The US and California flags were raised at sunrise, about 5:30 am.
They kicked off the celebrations at 5:55 am with a short burst of fireworks, followed by Disney movie music. The first song was A Dream is Wish Your Heart Makes, from Cinderella. The crowd on Main Street was then allowed entry into the other Park attractions, and we slowly started moving down Main Street. An overhead camera on a long boom recorded the crowd as it passed by. We passed close to the Castle, and turned into Tomorrowland. Our first stop was Buzz Lightyear Astro Blasters. My friend got more than 750,000. I got more than a million, but my score wasn't recorded, so I didn't get on the leader board. We wanted to get something to eat next, but every place that served real food had very, very long lines. So we settled on getting pretzels and slurpees. There was a piano player playing ragtime music as we ate. Later he left and a piano tuner came and started tuning the piano, which I've never seen before at Disneyland.
We visited some of the shops on Main Street, and noticed that many of the items that were available exclusively at the Diamond Celebration Merchandise Event (May 20-21 at the Disneyland Hotel) were now being sold to the general public. At the Crystal Arts shop, we saw the same diamond shaped glass paperweight that we got at the event. Except that there was no dates etched on the surface. We were surprised that they also had two larger sizes of the diamond, one about twice as large (6 inches) and another about twice that again (12 inches). The small 3 inch diamond was $40, the medium $250 and the large was $2150. They are all very impressive in person, and the large one is massive. It is also limited edition. The one displayed in the front window of the store was labeled 1/60, which I didn't notice until I looked at the photos that I took.
We then did several more rides, including Indiana Jones, Pirates of the Caribbean, and Haunted Mansion. Above the entrance to the Pirates ride is a sign for the Dream Suite, which used to be the Disney Gallery, before it was moved to Main Street, next to Disneyana. One of the prizes in a sweepstakes being run during the Diamond Celebration is a stay at the Dream Suite.
We then split up. I did some more rides, including a second go at Buzz Lightyear. This time my score was recorded, and I got the #5 high score of the day. My favorite place to eat at Disneyland, Plaza Inn, had a very, very long line waiting outside. So instead I ate lunch at the Pizza Port, which had a short and quickly moving line. They had an Avengers inspired menu of desserts. Next store, there was an exhibit for the currently running Tomorrowland movie. I also did some rides in Fantasyland that I have not done in a long time. Snow White's Scary Adventures was great fun. I touched the golden apple at the entrance to the ride, which generated cackling and evil words from the Old Hag. Next was Alice in Wonderland, which has new very nice animated sequences that integrated nicely with the animatronics. The ride wait time was posted as 60 minutes, but it only took me 30 minutes to get on the ride.
I started browsing the 60th Anniversary merchandise in various shops on Main Street. The Showcase shop was entirely devoted to 60th merchandise. Since some fellow collectors were asking about the rotating castle diamond shaped globe, I took a good look at it and took photos. Unfortunately, none of them had working batteries, so I couldn't see the castle rotating or lit up. Next I went to Disneyana, where they had many of the items that were offered during the Diamond Celebration Merchandise Event that I attended on May 20, including most of the limited edition items. They also had the $28,000 crystal slipper that was the grand prize of the Diamond Celebration Sweepstakes. It didn't look as impressive as I was expecting. It didn't help that it was all alone in a large glass case, without any identifying or promo placards. In the Ink & Paint booth there was a framed copy of the Diamond Celebration Tink Cel, with signed postcard and pin. I had preordered a copy of this exact same item, but the pin wasn't ready in time, so it will be shipped to me later. It is called "The Happiest Place on Earth", is limited to 1000 copies, and has a hand drawn Cel of Tinker Bell floating above a stylized map of Disneyland. The Tinker Bell pin is LE 750.
Next I entered Disney California Adventure Park (DCA), to meet up with my friend for dinner at 5:30 pm. I passed Carthay Circle Restaurant, which is extensively decorated for the Diamond Celebration, as the DCA counterpart to Disneyland Park's Sleeping Beauty Castle. The dessert for dinner consisted of four different small individual desserts.
Then at 7:30 we lined up to get a good spot for the World of Color show. It started at 9 pm, and lasted about 22 minutes. It was entirely redone, with Neal Patrick Harris and Mickey Mouse as the hosts. It was funny seeing the giant Mickey face on the ferris wheel being replaced by a screen, then the same image Mickey being projected onto it. The show was really entertaining. I liked the selection of movies that were presented. Snow White and Frozen had the most time allotted. They played almost the entire "Let It Go" scene, which looked and sounded great. The crowd cheered loudly when a brief glimpse of BH6 appeared. They also showed brief clips of Wreck-It Ralph, and had an image of the live action Cinderella in her ball gown that flashed on the water screen for a second or two. Then they had brief images from some popular DL attractions. Finally they had Walt Disney speaking a final message, which was very touching. I would say that this version is much better than the previous version. Neal Patrick Harris was a great choice as the host.
We then viewed the DL fireworks from just inside the entrance to DCA. We then split up again. I was disappointed that DL was at capacity, so they wouldn't allow me back inside. I had wanted to see the new Paint the Night, which is an updated version of the old Electrical Light Parade, which was one of my favorites when it was still being performed in DL and DCA. I am looking forward to seeing it in the near future. So I went back to my hotel room, and rested up. I only did 16 hours of the 24 hour event, but I felt very good about what I did experience.
Main Street - Crystal Arts Shop, window display. Diamond Celebration Crystal Icon, large size (12 inch), $2150.
I went with a fellow Disney collector to the 24-Event that kicked off the official Disneyland Resort 60th Anniversary Diamond Celebration. It started on May 22, 2015 at 6 am and ended on May 23, 2015. However, we were only in DLR on May 22 until about 10 pm, being in the Parks for about 16 of the 24 hours.
We left the Hilton Anaheim Hotel at about 2:15 am, walked through Downtown Disney District and arrived at the security checkpoint for DLR at 2:30. The line was relatively short and quick, so we felt pretty good that were there early enough to get in near the head of the line. However, this was quickly dispelled when we saw how many people were in the entrance plaza between Disneyland Park and Disney California Park (also called the Esplanade). Rather than being allowed to line up in front of Disneyland Park, we were escorted to the other side of the plaza, to the shuttle bus area. There were many thousands of people there, in multiple long lines that stretched the length of the shuttle parking area. It reminded me of the lines outside the Anaheim Convention Center for the D23 event that I attended in August 2013. There was a Japanese TV crew roaming the lines broadcasting images of the crowd. At about 4 am, the lines started moving, and we finally entered the park at exactly 5 am.
We entered Main Street, waiting for the start of the celebrations at 6 am. Some stores were already open. In particular, there were very long lines formed to enter the Main Street Emporium. Only the south doors were open, trying to make the entry more orderly. It turned out that the people in line were trying to get the 24-hr exclusive merchandise, especially the LE pin of Dopey. We decided to wait by the flag pole at the center of the Main Street south plaza, which afforded us a good view of the Castle. The US and California flags were raised at sunrise, about 5:30 am.
They kicked off the celebrations at 5:55 am with a short burst of fireworks, followed by Disney movie music. The first song was A Dream is Wish Your Heart Makes, from Cinderella. The crowd on Main Street was then allowed entry into the other Park attractions, and we slowly started moving down Main Street. An overhead camera on a long boom recorded the crowd as it passed by. We passed close to the Castle, and turned into Tomorrowland. Our first stop was Buzz Lightyear Astro Blasters. My friend got more than 750,000. I got more than a million, but my score wasn't recorded, so I didn't get on the leader board. We wanted to get something to eat next, but every place that served real food had very, very long lines. So we settled on getting pretzels and slurpees. There was a piano player playing ragtime music as we ate. Later he left and a piano tuner came and started tuning the piano, which I've never seen before at Disneyland.
We visited some of the shops on Main Street, and noticed that many of the items that were available exclusively at the Diamond Celebration Merchandise Event (May 20-21 at the Disneyland Hotel) were now being sold to the general public. At the Crystal Arts shop, we saw the same diamond shaped glass paperweight that we got at the event. Except that there was no dates etched on the surface. We were surprised that they also had two larger sizes of the diamond, one about twice as large (6 inches) and another about twice that again (12 inches). The small 3 inch diamond was $40, the medium $250 and the large was $2150. They are all very impressive in person, and the large one is massive. It is also limited edition. The one displayed in the front window of the store was labeled 1/60, which I didn't notice until I looked at the photos that I took.
We then did several more rides, including Indiana Jones, Pirates of the Caribbean, and Haunted Mansion. Above the entrance to the Pirates ride is a sign for the Dream Suite, which used to be the Disney Gallery, before it was moved to Main Street, next to Disneyana. One of the prizes in a sweepstakes being run during the Diamond Celebration is a stay at the Dream Suite.
We then split up. I did some more rides, including a second go at Buzz Lightyear. This time my score was recorded, and I got the #5 high score of the day. My favorite place to eat at Disneyland, Plaza Inn, had a very, very long line waiting outside. So instead I ate lunch at the Pizza Port, which had a short and quickly moving line. They had an Avengers inspired menu of desserts. Next store, there was an exhibit for the currently running Tomorrowland movie. I also did some rides in Fantasyland that I have not done in a long time. Snow White's Scary Adventures was great fun. I touched the golden apple at the entrance to the ride, which generated cackling and evil words from the Old Hag. Next was Alice in Wonderland, which has new very nice animated sequences that integrated nicely with the animatronics. The ride wait time was posted as 60 minutes, but it only took me 30 minutes to get on the ride.
I started browsing the 60th Anniversary merchandise in various shops on Main Street. The Showcase shop was entirely devoted to 60th merchandise. Since some fellow collectors were asking about the rotating castle diamond shaped globe, I took a good look at it and took photos. Unfortunately, none of them had working batteries, so I couldn't see the castle rotating or lit up. Next I went to Disneyana, where they had many of the items that were offered during the Diamond Celebration Merchandise Event that I attended on May 20, including most of the limited edition items. They also had the $28,000 crystal slipper that was the grand prize of the Diamond Celebration Sweepstakes. It didn't look as impressive as I was expecting. It didn't help that it was all alone in a large glass case, without any identifying or promo placards. In the Ink & Paint booth there was a framed copy of the Diamond Celebration Tink Cel, with signed postcard and pin. I had preordered a copy of this exact same item, but the pin wasn't ready in time, so it will be shipped to me later. It is called "The Happiest Place on Earth", is limited to 1000 copies, and has a hand drawn Cel of Tinker Bell floating above a stylized map of Disneyland. The Tinker Bell pin is LE 750.
Next I entered Disney California Adventure Park (DCA), to meet up with my friend for dinner at 5:30 pm. I passed Carthay Circle Restaurant, which is extensively decorated for the Diamond Celebration, as the DCA counterpart to Disneyland Park's Sleeping Beauty Castle. The dessert for dinner consisted of four different small individual desserts.
Then at 7:30 we lined up to get a good spot for the World of Color show. It started at 9 pm, and lasted about 22 minutes. It was entirely redone, with Neal Patrick Harris and Mickey Mouse as the hosts. It was funny seeing the giant Mickey face on the ferris wheel being replaced by a screen, then the same image Mickey being projected onto it. The show was really entertaining. I liked the selection of movies that were presented. Snow White and Frozen had the most time allotted. They played almost the entire "Let It Go" scene, which looked and sounded great. The crowd cheered loudly when a brief glimpse of BH6 appeared. They also showed brief clips of Wreck-It Ralph, and had an image of the live action Cinderella in her ball gown that flashed on the water screen for a second or two. Then they had brief images from some popular DL attractions. Finally they had Walt Disney speaking a final message, which was very touching. I would say that this version is much better than the previous version. Neal Patrick Harris was a great choice as the host.
We then viewed the DL fireworks from just inside the entrance to DCA. We then split up again. I was disappointed that DL was at capacity, so they wouldn't allow me back inside. I had wanted to see the new Paint the Night, which is an updated version of the old Electrical Light Parade, which was one of my favorites when it was still being performed in DL and DCA. I am looking forward to seeing it in the near future. So I went back to my hotel room, and rested up. I only did 16 hours of the 24 hour event, but I felt very good about what I did experience.
twitter.com/SamHeughan/status/1291769658333450246?s=20
www.clanlandsbook.com/ Woohoo! Preordered! 👍😍
- not my photo -
My first new DD in quite some time, I had originally preordered her but some irl expense got in the way at the time and I ended up having to cancel her. I always regretted having to cancel her, it was a complete fluke that I happened to find her recently at a price so good I couldn't resist any longer.
Entering Disneyland Park at 5 am. Main Street Disneyland RR Station.
I went with a fellow Disney collector to the 24-Event that kicked off the official Disneyland Resort 60th Anniversary Diamond Celebration. It started on May 22, 2015 at 6 am and ended on May 23, 2015. However, we were only in DLR on May 22 until about 10 pm, being in the Parks for about 16 of the 24 hours.
We left the Hilton Anaheim Hotel at about 2:15 am, walked through Downtown Disney District and arrived at the security checkpoint for DLR at 2:30. The line was relatively short and quick, so we felt pretty good that were there early enough to get in near the head of the line. However, this was quickly dispelled when we saw how many people were in the entrance plaza between Disneyland Park and Disney California Park (also called the Esplanade). Rather than being allowed to line up in front of Disneyland Park, we were escorted to the other side of the plaza, to the shuttle bus area. There were many thousands of people there, in multiple long lines that stretched the length of the shuttle parking area. It reminded me of the lines outside the Anaheim Convention Center for the D23 event that I attended in August 2013. There was a Japanese TV crew roaming the lines broadcasting images of the crowd. At about 4 am, the lines started moving, and we finally entered the park at exactly 5 am.
We entered Main Street, waiting for the start of the celebrations at 6 am. Some stores were already open. In particular, there were very long lines formed to enter the Main Street Emporium. Only the south doors were open, trying to make the entry more orderly. It turned out that the people in line were trying to get the 24-hr exclusive merchandise, especially the LE pin of Dopey. We decided to wait by the flag pole at the center of the Main Street south plaza, which afforded us a good view of the Castle. The US and California flags were raised at sunrise, about 5:30 am.
They kicked off the celebrations at 5:55 am with a short burst of fireworks, followed by Disney movie music. The first song was A Dream is Wish Your Heart Makes, from Cinderella. The crowd on Main Street was then allowed entry into the other Park attractions, and we slowly started moving down Main Street. An overhead camera on a long boom recorded the crowd as it passed by. We passed close to the Castle, and turned into Tomorrowland. Our first stop was Buzz Lightyear Astro Blasters. My friend got more than 750,000. I got more than a million, but my score wasn't recorded, so I didn't get on the leader board. We wanted to get something to eat next, but every place that served real food had very, very long lines. So we settled on getting pretzels and slurpees. There was a piano player playing ragtime music as we ate. Later he left and a piano tuner came and started tuning the piano, which I've never seen before at Disneyland.
We visited some of the shops on Main Street, and noticed that many of the items that were available exclusively at the Diamond Celebration Merchandise Event (May 20-21 at the Disneyland Hotel) were now being sold to the general public. At the Crystal Arts shop, we saw the same diamond shaped glass paperweight that we got at the event. Except that there was no dates etched on the surface. We were surprised that they also had two larger sizes of the diamond, one about twice as large (6 inches) and another about twice that again (12 inches). The small 3 inch diamond was $40, the medium $250 and the large was $2150. They are all very impressive in person, and the large one is massive. It is also limited edition. The one displayed in the front window of the store was labeled 1/60, which I didn't notice until I looked at the photos that I took.
We then did several more rides, including Indiana Jones, Pirates of the Caribbean, and Haunted Mansion. Above the entrance to the Pirates ride is a sign for the Dream Suite, which used to be the Disney Gallery, before it was moved to Main Street, next to Disneyana. One of the prizes in a sweepstakes being run during the Diamond Celebration is a stay at the Dream Suite.
We then split up. I did some more rides, including a second go at Buzz Lightyear. This time my score was recorded, and I got the #5 high score of the day. My favorite place to eat at Disneyland, Plaza Inn, had a very, very long line waiting outside. So instead I ate lunch at the Pizza Port, which had a short and quickly moving line. They had an Avengers inspired menu of desserts. Next store, there was an exhibit for the currently running Tomorrowland movie. I also did some rides in Fantasyland that I have not done in a long time. Snow White's Scary Adventures was great fun. I touched the golden apple at the entrance to the ride, which generated cackling and evil words from the Old Hag. Next was Alice in Wonderland, which has new very nice animated sequences that integrated nicely with the animatronics. The ride wait time was posted as 60 minutes, but it only took me 30 minutes to get on the ride.
I started browsing the 60th Anniversary merchandise in various shops on Main Street. The Showcase shop was entirely devoted to 60th merchandise. Since some fellow collectors were asking about the rotating castle diamond shaped globe, I took a good look at it and took photos. Unfortunately, none of them had working batteries, so I couldn't see the castle rotating or lit up. Next I went to Disneyana, where they had many of the items that were offered during the Diamond Celebration Merchandise Event that I attended on May 20, including most of the limited edition items. They also had the $28,000 crystal slipper that was the grand prize of the Diamond Celebration Sweepstakes. It didn't look as impressive as I was expecting. It didn't help that it was all alone in a large glass case, without any identifying or promo placards. In the Ink & Paint booth there was a framed copy of the Diamond Celebration Tink Cel, with signed postcard and pin. I had preordered a copy of this exact same item, but the pin wasn't ready in time, so it will be shipped to me later. It is called "The Happiest Place on Earth", is limited to 1000 copies, and has a hand drawn Cel of Tinker Bell floating above a stylized map of Disneyland. The Tinker Bell pin is LE 750.
Next I entered Disney California Adventure Park (DCA), to meet up with my friend for dinner at 5:30 pm. I passed Carthay Circle Restaurant, which is extensively decorated for the Diamond Celebration, as the DCA counterpart to Disneyland Park's Sleeping Beauty Castle. The dessert for dinner consisted of four different small individual desserts.
Then at 7:30 we lined up to get a good spot for the World of Color show. It started at 9 pm, and lasted about 22 minutes. It was entirely redone, with Neal Patrick Harris and Mickey Mouse as the hosts. It was funny seeing the giant Mickey face on the ferris wheel being replaced by a screen, then the same image Mickey being projected onto it. The show was really entertaining. I liked the selection of movies that were presented. Snow White and Frozen had the most time allotted. They played almost the entire "Let It Go" scene, which looked and sounded great. The crowd cheered loudly when a brief glimpse of BH6 appeared. They also showed brief clips of Wreck-It Ralph, and had an image of the live action Cinderella in her ball gown that flashed on the water screen for a second or two. Then they had brief images from some popular DL attractions. Finally they had Walt Disney speaking a final message, which was very touching. I would say that this version is much better than the previous version. Neal Patrick Harris was a great choice as the host.
We then viewed the DL fireworks from just inside the entrance to DCA. We then split up again. I was disappointed that DL was at capacity, so they wouldn't allow me back inside. I had wanted to see the new Paint the Night, which is an updated version of the old Electrical Light Parade, which was one of my favorites when it was still being performed in DL and DCA. I am looking forward to seeing it in the near future. So I went back to my hotel room, and rested up. I only did 16 hours of the 24 hour event, but I felt very good about what I did experience.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. I got the low edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
One yr. ago today I began the 365 Toy Project. Unfortunately, computer troubles derailed my work on the project and I was forced to abandon it. T_T Yesterday would have been day 365 for me if I had been able to stick with it.
So today, on the anniversary of my first attempt at this, I am rebooting and starting over! :3
And to start me off, I have my most recent addition (just got her today!) to my toy collection: the 2008 Art Collector My Little Pony.
Isn't she spiffy? I love her so! The details on this pony are really great. Also, her hair feels like it's really nice quality! Better than that of regular MLPs. So she's worth the money (I preordered her for $12.99 at BigBadToyStore.com). She's really so cool. It's like a big "thank you" from Hasbro to all of us who have loved MLPs since childhood. ^_^
Oh! And her head swivels!! o.O
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
Jae Lee's Superman and Wonder Woman
First off sorry to have flooded your Flickr Feed with so many pictures. I cannot believe the amount of detail that went into these particular figures. They are based on the Art by the incomparable Jae Lee, and sculpted beautifully by Jonathan Matthews (who also I believe sculpted the Greg Capullo Designer Series as well). I have never had figures from DC Collectibles that got me so excited since the announcement of Batman The Animated Series.
These figures go so well with the other New 52 especially the other Designer Series by Greg Capullo.
I preordered these on Amazon but when I saw them in person I just knew I had to get them right then and there.
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
Coronavirus disease 2019 (COVID-19) is a contagious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The first case was identified in Wuhan, China, in December 2019. The disease has since spread worldwide, leading to an ongoing pandemic.
Symptoms of COVID-19 are variable, but often include fever, cough, fatigue, breathing difficulties, and loss of smell and taste. Symptoms begin one to fourteen days after exposure to the virus. Of those people who develop noticeable symptoms, most (81%) develop mild to moderate symptoms (up to mild pneumonia), while 14% develop severe symptoms (dyspnea, hypoxia, or more than 50% lung involvement on imaging), and 5% suffer critical symptoms (respiratory failure, shock, or multiorgan dysfunction). Older people are more likely to have severe symptoms. At least a third of the people who are infected with the virus remain asymptomatic and do not develop noticeable symptoms at any point in time, but they still can spread the disease.[ Around 20% of those people will remain asymptomatic throughout infection, and the rest will develop symptoms later on, becoming pre-symptomatic rather than asymptomatic and therefore having a higher risk of transmitting the virus to others. Some people continue to experience a range of effects—known as long COVID—for months after recovery, and damage to organs has been observed. Multi-year studies are underway to further investigate the long-term effects of the disease.
The virus that causes COVID-19 spreads mainly when an infected person is in close contact[a] with another person. Small droplets and aerosols containing the virus can spread from an infected person's nose and mouth as they breathe, cough, sneeze, sing, or speak. Other people are infected if the virus gets into their mouth, nose or eyes. The virus may also spread via contaminated surfaces, although this is not thought to be the main route of transmission. The exact route of transmission is rarely proven conclusively, but infection mainly happens when people are near each other for long enough. People who are infected can transmit the virus to another person up to two days before they themselves show symptoms, as can people who do not experience symptoms. People remain infectious for up to ten days after the onset of symptoms in moderate cases and up to 20 days in severe cases. Several testing methods have been developed to diagnose the disease. The standard diagnostic method is by detection of the virus' nucleic acid by real-time reverse transcription polymerase chain reaction (rRT-PCR), transcription-mediated amplification (TMA), or by reverse transcription loop-mediated isothermal amplification (RT-LAMP) from a nasopharyngeal swab.
Preventive measures include physical or social distancing, quarantining, ventilation of indoor spaces, covering coughs and sneezes, hand washing, and keeping unwashed hands away from the face. The use of face masks or coverings has been recommended in public settings to minimise the risk of transmissions. Several vaccines have been developed and several countries have initiated mass vaccination campaigns.
Although work is underway to develop drugs that inhibit the virus, the primary treatment is currently symptomatic. Management involves the treatment of symptoms, supportive care, isolation, and experimental measures.
SIGNS AND SYSTOMS
Symptoms of COVID-19 are variable, ranging from mild symptoms to severe illness. Common symptoms include headache, loss of smell and taste, nasal congestion and rhinorrhea, cough, muscle pain, sore throat, fever, diarrhea, and breathing difficulties. People with the same infection may have different symptoms, and their symptoms may change over time. Three common clusters of symptoms have been identified: one respiratory symptom cluster with cough, sputum, shortness of breath, and fever; a musculoskeletal symptom cluster with muscle and joint pain, headache, and fatigue; a cluster of digestive symptoms with abdominal pain, vomiting, and diarrhea. In people without prior ear, nose, and throat disorders, loss of taste combined with loss of smell is associated with COVID-19.
Most people (81%) develop mild to moderate symptoms (up to mild pneumonia), while 14% develop severe symptoms (dyspnea, hypoxia, or more than 50% lung involvement on imaging) and 5% of patients suffer critical symptoms (respiratory failure, shock, or multiorgan dysfunction). At least a third of the people who are infected with the virus do not develop noticeable symptoms at any point in time. These asymptomatic carriers tend not to get tested and can spread the disease. Other infected people will develop symptoms later, called "pre-symptomatic", or have very mild symptoms and can also spread the virus.
As is common with infections, there is a delay between the moment a person first becomes infected and the appearance of the first symptoms. The median delay for COVID-19 is four to five days. Most symptomatic people experience symptoms within two to seven days after exposure, and almost all will experience at least one symptom within 12 days.
Most people recover from the acute phase of the disease. However, some people continue to experience a range of effects for months after recovery—named long COVID—and damage to organs has been observed. Multi-year studies are underway to further investigate the long-term effects of the disease.
CAUSE
TRANSMISSION
Coronavirus disease 2019 (COVID-19) spreads from person to person mainly through the respiratory route after an infected person coughs, sneezes, sings, talks or breathes. A new infection occurs when virus-containing particles exhaled by an infected person, either respiratory droplets or aerosols, get into the mouth, nose, or eyes of other people who are in close contact with the infected person. During human-to-human transmission, an average 1000 infectious SARS-CoV-2 virions are thought to initiate a new infection.
The closer people interact, and the longer they interact, the more likely they are to transmit COVID-19. Closer distances can involve larger droplets (which fall to the ground) and aerosols, whereas longer distances only involve aerosols. Larger droplets can also turn into aerosols (known as droplet nuclei) through evaporation. The relative importance of the larger droplets and the aerosols is not clear as of November 2020; however, the virus is not known to spread between rooms over long distances such as through air ducts. Airborne transmission is able to particularly occur indoors, in high risk locations such as restaurants, choirs, gyms, nightclubs, offices, and religious venues, often when they are crowded or less ventilated. It also occurs in healthcare settings, often when aerosol-generating medical procedures are performed on COVID-19 patients.
Although it is considered possible there is no direct evidence of the virus being transmitted by skin to skin contact. A person could get COVID-19 indirectly by touching a contaminated surface or object before touching their own mouth, nose, or eyes, though this is not thought to be the main way the virus spreads. The virus is not known to spread through feces, urine, breast milk, food, wastewater, drinking water, or via animal disease vectors (although some animals can contract the virus from humans). It very rarely transmits from mother to baby during pregnancy.
Social distancing and the wearing of cloth face masks, surgical masks, respirators, or other face coverings are controls for droplet transmission. Transmission may be decreased indoors with well maintained heating and ventilation systems to maintain good air circulation and increase the use of outdoor air.
The number of people generally infected by one infected person varies. Coronavirus disease 2019 is more infectious than influenza, but less so than measles. It often spreads in clusters, where infections can be traced back to an index case or geographical location. There is a major role of "super-spreading events", where many people are infected by one person.
A person who is infected can transmit the virus to others up to two days before they themselves show symptoms, and even if symptoms never appear. People remain infectious in moderate cases for 7–12 days, and up to two weeks in severe cases. In October 2020, medical scientists reported evidence of reinfection in one person.
VIROLOGY
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is a novel severe acute respiratory syndrome coronavirus. It was first isolated from three people with pneumonia connected to the cluster of acute respiratory illness cases in Wuhan. All structural features of the novel SARS-CoV-2 virus particle occur in related coronaviruses in nature.
Outside the human body, the virus is destroyed by household soap, which bursts its protective bubble.
SARS-CoV-2 is closely related to the original SARS-CoV. It is thought to have an animal (zoonotic) origin. Genetic analysis has revealed that the coronavirus genetically clusters with the genus Betacoronavirus, in subgenus Sarbecovirus (lineage B) together with two bat-derived strains. It is 96% identical at the whole genome level to other bat coronavirus samples (BatCov RaTG13). The structural proteins of SARS-CoV-2 include membrane glycoprotein (M), envelope protein (E), nucleocapsid protein (N), and the spike protein (S). The M protein of SARS-CoV-2 is about 98% similar to the M protein of bat SARS-CoV, maintains around 98% homology with pangolin SARS-CoV, and has 90% homology with the M protein of SARS-CoV; whereas, the similarity is only around 38% with the M protein of MERS-CoV. The structure of the M protein resembles the sugar transporter SemiSWEET.
The many thousands of SARS-CoV-2 variants are grouped into clades. Several different clade nomenclatures have been proposed. Nextstrain divides the variants into five clades (19A, 19B, 20A, 20B, and 20C), while GISAID divides them into seven (L, O, V, S, G, GH, and GR).
Several notable variants of SARS-CoV-2 emerged in late 2020. Cluster 5 emerged among minks and mink farmers in Denmark. After strict quarantines and a mink euthanasia campaign, it is believed to have been eradicated. The Variant of Concern 202012/01 (VOC 202012/01) is believed to have emerged in the United Kingdom in September. The 501Y.V2 Variant, which has the same N501Y mutation, arose independently in South Africa.
SARS-CoV-2 VARIANTS
Three known variants of SARS-CoV-2 are currently spreading among global populations as of January 2021 including the UK Variant (referred to as B.1.1.7) first found in London and Kent, a variant discovered in South Africa (referred to as 1.351), and a variant discovered in Brazil (referred to as P.1).
Using Whole Genome Sequencing, epidemiology and modelling suggest the new UK variant ‘VUI – 202012/01’ (the first Variant Under Investigation in December 2020) transmits more easily than other strains.
PATHOPHYSIOLOGY
COVID-19 can affect the upper respiratory tract (sinuses, nose, and throat) and the lower respiratory tract (windpipe and lungs). The lungs are the organs most affected by COVID-19 because the virus accesses host cells via the enzyme angiotensin-converting enzyme 2 (ACE2), which is most abundant in type II alveolar cells of the lungs. The virus uses a special surface glycoprotein called a "spike" (peplomer) to connect to ACE2 and enter the host cell. The density of ACE2 in each tissue correlates with the severity of the disease in that tissue and decreasing ACE2 activity might be protective, though another view is that increasing ACE2 using angiotensin II receptor blocker medications could be protective. As the alveolar disease progresses, respiratory failure might develop and death may follow.
Whether SARS-CoV-2 is able to invade the nervous system remains unknown. The virus is not detected in the CNS of the majority of COVID-19 people with neurological issues. However, SARS-CoV-2 has been detected at low levels in the brains of those who have died from COVID-19, but these results need to be confirmed. SARS-CoV-2 could cause respiratory failure through affecting the brain stem as other coronaviruses have been found to invade the CNS. While virus has been detected in cerebrospinal fluid of autopsies, the exact mechanism by which it invades the CNS remains unclear and may first involve invasion of peripheral nerves given the low levels of ACE2 in the brain. The virus may also enter the bloodstream from the lungs and cross the blood-brain barrier to gain access to the CNS, possibly within an infected white blood cell.
The virus also affects gastrointestinal organs as ACE2 is abundantly expressed in the glandular cells of gastric, duodenal and rectal epithelium as well as endothelial cells and enterocytes of the small intestine.
The virus can cause acute myocardial injury and chronic damage to the cardiovascular system. An acute cardiac injury was found in 12% of infected people admitted to the hospital in Wuhan, China, and is more frequent in severe disease. Rates of cardiovascular symptoms are high, owing to the systemic inflammatory response and immune system disorders during disease progression, but acute myocardial injuries may also be related to ACE2 receptors in the heart. ACE2 receptors are highly expressed in the heart and are involved in heart function. A high incidence of thrombosis and venous thromboembolism have been found people transferred to Intensive care unit (ICU) with COVID-19 infections, and may be related to poor prognosis. Blood vessel dysfunction and clot formation (as suggested by high D-dimer levels caused by blood clots) are thought to play a significant role in mortality, incidences of clots leading to pulmonary embolisms, and ischaemic events within the brain have been noted as complications leading to death in people infected with SARS-CoV-2. Infection appears to set off a chain of vasoconstrictive responses within the body, constriction of blood vessels within the pulmonary circulation has also been posited as a mechanism in which oxygenation decreases alongside the presentation of viral pneumonia. Furthermore, microvascular blood vessel damage has been reported in a small number of tissue samples of the brains – without detected SARS-CoV-2 – and the olfactory bulbs from those who have died from COVID-19.
Another common cause of death is complications related to the kidneys. Early reports show that up to 30% of hospitalized patients both in China and in New York have experienced some injury to their kidneys, including some persons with no previous kidney problems.
Autopsies of people who died of COVID-19 have found diffuse alveolar damage, and lymphocyte-containing inflammatory infiltrates within the lung.
IMMUNOPATHOLOGY
Although SARS-CoV-2 has a tropism for ACE2-expressing epithelial cells of the respiratory tract, people with severe COVID-19 have symptoms of systemic hyperinflammation. Clinical laboratory findings of elevated IL-2, IL-7, IL-6, granulocyte-macrophage colony-stimulating factor (GM-CSF), interferon-γ inducible protein 10 (IP-10), monocyte chemoattractant protein 1 (MCP-1), macrophage inflammatory protein 1-α (MIP-1α), and tumour necrosis factor-α (TNF-α) indicative of cytokine release syndrome (CRS) suggest an underlying immunopathology.
Additionally, people with COVID-19 and acute respiratory distress syndrome (ARDS) have classical serum biomarkers of CRS, including elevated C-reactive protein (CRP), lactate dehydrogenase (LDH), D-dimer, and ferritin.
Systemic inflammation results in vasodilation, allowing inflammatory lymphocytic and monocytic infiltration of the lung and the heart. In particular, pathogenic GM-CSF-secreting T-cells were shown to correlate with the recruitment of inflammatory IL-6-secreting monocytes and severe lung pathology in people with COVID-19 . Lymphocytic infiltrates have also been reported at autopsy.
VIRAL AND HOST FACTORS
VIRUS PROTEINS
Multiple viral and host factors affect the pathogenesis of the virus. The S-protein, otherwise known as the spike protein, is the viral component that attaches to the host receptor via the ACE2 receptors. It includes two subunits: S1 and S2. S1 determines the virus host range and cellular tropism via the receptor binding domain. S2 mediates the membrane fusion of the virus to its potential cell host via the H1 and HR2, which are heptad repeat regions. Studies have shown that S1 domain induced IgG and IgA antibody levels at a much higher capacity. It is the focus spike proteins expression that are involved in many effective COVID-19 vaccines.
The M protein is the viral protein responsible for the transmembrane transport of nutrients. It is the cause of the bud release and the formation of the viral envelope. The N and E protein are accessory proteins that interfere with the host's immune response.
HOST FACTORS
Human angiotensin converting enzyme 2 (hACE2) is the host factor that SARS-COV2 virus targets causing COVID-19. Theoretically the usage of angiotensin receptor blockers (ARB) and ACE inhibitors upregulating ACE2 expression might increase morbidity with COVID-19, though animal data suggest some potential protective effect of ARB. However no clinical studies have proven susceptibility or outcomes. Until further data is available, guidelines and recommendations for hypertensive patients remain.
The virus' effect on ACE2 cell surfaces leads to leukocytic infiltration, increased blood vessel permeability, alveolar wall permeability, as well as decreased secretion of lung surfactants. These effects cause the majority of the respiratory symptoms. However, the aggravation of local inflammation causes a cytokine storm eventually leading to a systemic inflammatory response syndrome.
HOST CYTOKINE RESPONSE
The severity of the inflammation can be attributed to the severity of what is known as the cytokine storm. Levels of interleukin 1B, interferon-gamma, interferon-inducible protein 10, and monocyte chemoattractant protein 1 were all associated with COVID-19 disease severity. Treatment has been proposed to combat the cytokine storm as it remains to be one of the leading causes of morbidity and mortality in COVID-19 disease.
A cytokine storm is due to an acute hyperinflammatory response that is responsible for clinical illness in an array of diseases but in COVID-19, it is related to worse prognosis and increased fatality. The storm causes the acute respiratory distress syndrome, blood clotting events such as strokes, myocardial infarction, encephalitis, acute kidney injury, and vasculitis. The production of IL-1, IL-2, IL-6, TNF-alpha, and interferon-gamma, all crucial components of normal immune responses, inadvertently become the causes of a cytokine storm. The cells of the central nervous system, the microglia, neurons, and astrocytes, are also be involved in the release of pro-inflammatory cytokines affecting the nervous system, and effects of cytokine storms toward the CNS are not uncommon.
DIAGNOSIS
COVID-19 can provisionally be diagnosed on the basis of symptoms and confirmed using reverse transcription polymerase chain reaction (RT-PCR) or other nucleic acid testing of infected secretions. Along with laboratory testing, chest CT scans may be helpful to diagnose COVID-19 in individuals with a high clinical suspicion of infection. Detection of a past infection is possible with serological tests, which detect antibodies produced by the body in response to the infection.
VIRAL TESTING
The standard methods of testing for presence of SARS-CoV-2 are nucleic acid tests, which detects the presence of viral RNA fragments. As these tests detect RNA but not infectious virus, its "ability to determine duration of infectivity of patients is limited." The test is typically done on respiratory samples obtained by a nasopharyngeal swab; however, a nasal swab or sputum sample may also be used. Results are generally available within hours. The WHO has published several testing protocols for the disease.
A number of laboratories and companies have developed serological tests, which detect antibodies produced by the body in response to infection. Several have been evaluated by Public Health England and approved for use in the UK.
The University of Oxford's CEBM has pointed to mounting evidence that "a good proportion of 'new' mild cases and people re-testing positives after quarantine or discharge from hospital are not infectious, but are simply clearing harmless virus particles which their immune system has efficiently dealt with" and have called for "an international effort to standardize and periodically calibrate testing" On 7 September, the UK government issued "guidance for procedures to be implemented in laboratories to provide assurance of positive SARS-CoV-2 RNA results during periods of low prevalence, when there is a reduction in the predictive value of positive test results."
IMAGING
Chest CT scans may be helpful to diagnose COVID-19 in individuals with a high clinical suspicion of infection but are not recommended for routine screening. Bilateral multilobar ground-glass opacities with a peripheral, asymmetric, and posterior distribution are common in early infection. Subpleural dominance, crazy paving (lobular septal thickening with variable alveolar filling), and consolidation may appear as the disease progresses. Characteristic imaging features on chest radiographs and computed tomography (CT) of people who are symptomatic include asymmetric peripheral ground-glass opacities without pleural effusions.
Many groups have created COVID-19 datasets that include imagery such as the Italian Radiological Society which has compiled an international online database of imaging findings for confirmed cases. Due to overlap with other infections such as adenovirus, imaging without confirmation by rRT-PCR is of limited specificity in identifying COVID-19. A large study in China compared chest CT results to PCR and demonstrated that though imaging is less specific for the infection, it is faster and more sensitive.
Coding
In late 2019, the WHO assigned emergency ICD-10 disease codes U07.1 for deaths from lab-confirmed SARS-CoV-2 infection and U07.2 for deaths from clinically or epidemiologically diagnosed COVID-19 without lab-confirmed SARS-CoV-2 infection.
PATHOLOGY
The main pathological findings at autopsy are:
Macroscopy: pericarditis, lung consolidation and pulmonary oedema
Lung findings:
minor serous exudation, minor fibrin exudation
pulmonary oedema, pneumocyte hyperplasia, large atypical pneumocytes, interstitial inflammation with lymphocytic infiltration and multinucleated giant cell formation
diffuse alveolar damage (DAD) with diffuse alveolar exudates. DAD is the cause of acute respiratory distress syndrome (ARDS) and severe hypoxemia.
organisation of exudates in alveolar cavities and pulmonary interstitial fibrosis
plasmocytosis in BAL
Blood: disseminated intravascular coagulation (DIC); leukoerythroblastic reaction
Liver: microvesicular steatosis
PREVENTION
Preventive measures to reduce the chances of infection include staying at home, wearing a mask in public, avoiding crowded places, keeping distance from others, ventilating indoor spaces, washing hands with soap and water often and for at least 20 seconds, practising good respiratory hygiene, and avoiding touching the eyes, nose, or mouth with unwashed hands.
Those diagnosed with COVID-19 or who believe they may be infected are advised by the CDC to stay home except to get medical care, call ahead before visiting a healthcare provider, wear a face mask before entering the healthcare provider's office and when in any room or vehicle with another person, cover coughs and sneezes with a tissue, regularly wash hands with soap and water and avoid sharing personal household items.
The first COVID-19 vaccine was granted regulatory approval on 2 December by the UK medicines regulator MHRA. It was evaluated for emergency use authorization (EUA) status by the US FDA, and in several other countries. Initially, the US National Institutes of Health guidelines do not recommend any medication for prevention of COVID-19, before or after exposure to the SARS-CoV-2 virus, outside the setting of a clinical trial. Without a vaccine, other prophylactic measures, or effective treatments, a key part of managing COVID-19 is trying to decrease and delay the epidemic peak, known as "flattening the curve". This is done by slowing the infection rate to decrease the risk of health services being overwhelmed, allowing for better treatment of current cases, and delaying additional cases until effective treatments or a vaccine become available.
VACCINE
A COVID‑19 vaccine is a vaccine intended to provide acquired immunity against severe acute respiratory syndrome coronavirus 2 (SARS‑CoV‑2), the virus causing coronavirus disease 2019 (COVID‑19). Prior to the COVID‑19 pandemic, there was an established body of knowledge about the structure and function of coronaviruses causing diseases like severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS), which enabled accelerated development of various vaccine technologies during early 2020. On 10 January 2020, the SARS-CoV-2 genetic sequence data was shared through GISAID, and by 19 March, the global pharmaceutical industry announced a major commitment to address COVID-19.
In Phase III trials, several COVID‑19 vaccines have demonstrated efficacy as high as 95% in preventing symptomatic COVID‑19 infections. As of March 2021, 12 vaccines were authorized by at least one national regulatory authority for public use: two RNA vaccines (the Pfizer–BioNTech vaccine and the Moderna vaccine), four conventional inactivated vaccines (BBIBP-CorV, CoronaVac, Covaxin, and CoviVac), four viral vector vaccines (Sputnik V, the Oxford–AstraZeneca vaccine, Convidicea, and the Johnson & Johnson vaccine), and two protein subunit vaccines (EpiVacCorona and RBD-Dimer). In total, as of March 2021, 308 vaccine candidates were in various stages of development, with 73 in clinical research, including 24 in Phase I trials, 33 in Phase I–II trials, and 16 in Phase III development.
Many countries have implemented phased distribution plans that prioritize those at highest risk of complications, such as the elderly, and those at high risk of exposure and transmission, such as healthcare workers. As of 17 March 2021, 400.22 million doses of COVID‑19 vaccine have been administered worldwide based on official reports from national health agencies. AstraZeneca-Oxford anticipates producing 3 billion doses in 2021, Pfizer-BioNTech 1.3 billion doses, and Sputnik V, Sinopharm, Sinovac, and Johnson & Johnson 1 billion doses each. Moderna targets producing 600 million doses and Convidicea 500 million doses in 2021. By December 2020, more than 10 billion vaccine doses had been preordered by countries, with about half of the doses purchased by high-income countries comprising 14% of the world's population.
SOCIAL DISTANCING
Social distancing (also known as physical distancing) includes infection control actions intended to slow the spread of the disease by minimising close contact between individuals. Methods include quarantines; travel restrictions; and the closing of schools, workplaces, stadiums, theatres, or shopping centres. Individuals may apply social distancing methods by staying at home, limiting travel, avoiding crowded areas, using no-contact greetings, and physically distancing themselves from others. Many governments are now mandating or recommending social distancing in regions affected by the outbreak.
Outbreaks have occurred in prisons due to crowding and an inability to enforce adequate social distancing. In the United States, the prisoner population is aging and many of them are at high risk for poor outcomes from COVID-19 due to high rates of coexisting heart and lung disease, and poor access to high-quality healthcare.
SELF-ISOLATION
Self-isolation at home has been recommended for those diagnosed with COVID-19 and those who suspect they have been infected. Health agencies have issued detailed instructions for proper self-isolation. Many governments have mandated or recommended self-quarantine for entire populations. The strongest self-quarantine instructions have been issued to those in high-risk groups. Those who may have been exposed to someone with COVID-19 and those who have recently travelled to a country or region with the widespread transmission have been advised to self-quarantine for 14 days from the time of last possible exposure.
Face masks and respiratory hygiene
The WHO and the US CDC recommend individuals wear non-medical face coverings in public settings where there is an increased risk of transmission and where social distancing measures are difficult to maintain. This recommendation is meant to reduce the spread of the disease by asymptomatic and pre-symptomatic individuals and is complementary to established preventive measures such as social distancing. Face coverings limit the volume and travel distance of expiratory droplets dispersed when talking, breathing, and coughing. A face covering without vents or holes will also filter out particles containing the virus from inhaled and exhaled air, reducing the chances of infection. But, if the mask include an exhalation valve, a wearer that is infected (maybe without having noticed that, and asymptomatic) would transmit the virus outwards through it, despite any certification they can have. So the masks with exhalation valve are not for the infected wearers, and are not reliable to stop the pandemic in a large scale. Many countries and local jurisdictions encourage or mandate the use of face masks or cloth face coverings by members of the public to limit the spread of the virus.
Masks are also strongly recommended for those who may have been infected and those taking care of someone who may have the disease. When not wearing a mask, the CDC recommends covering the mouth and nose with a tissue when coughing or sneezing and recommends using the inside of the elbow if no tissue is available. Proper hand hygiene after any cough or sneeze is encouraged. Healthcare professionals interacting directly with people who have COVID-19 are advised to use respirators at least as protective as NIOSH-certified N95 or equivalent, in addition to other personal protective equipment.
HAND-WASHING AND HYGIENE
Thorough hand hygiene after any cough or sneeze is required. The WHO also recommends that individuals wash hands often with soap and water for at least 20 seconds, especially after going to the toilet or when hands are visibly dirty, before eating and after blowing one's nose. The CDC recommends using an alcohol-based hand sanitiser with at least 60% alcohol, but only when soap and water are not readily available. For areas where commercial hand sanitisers are not readily available, the WHO provides two formulations for local production. In these formulations, the antimicrobial activity arises from ethanol or isopropanol. Hydrogen peroxide is used to help eliminate bacterial spores in the alcohol; it is "not an active substance for hand antisepsis". Glycerol is added as a humectant.
SURFACE CLEANING
After being expelled from the body, coronaviruses can survive on surfaces for hours to days. If a person touches the dirty surface, they may deposit the virus at the eyes, nose, or mouth where it can enter the body cause infection. Current evidence indicates that contact with infected surfaces is not the main driver of Covid-19, leading to recommendations for optimised disinfection procedures to avoid issues such as the increase of antimicrobial resistance through the use of inappropriate cleaning products and processes. Deep cleaning and other surface sanitation has been criticized as hygiene theater, giving a false sense of security against something primarily spread through the air.
The amount of time that the virus can survive depends significantly on the type of surface, the temperature, and the humidity. Coronaviruses die very quickly when exposed to the UV light in sunlight. Like other enveloped viruses, SARS-CoV-2 survives longest when the temperature is at room temperature or lower, and when the relative humidity is low (<50%).
On many surfaces, including as glass, some types of plastic, stainless steel, and skin, the virus can remain infective for several days indoors at room temperature, or even about a week under ideal conditions. On some surfaces, including cotton fabric and copper, the virus usually dies after a few hours. As a general rule of thumb, the virus dies faster on porous surfaces than on non-porous surfaces.
However, this rule is not absolute, and of the many surfaces tested, two with the longest survival times are N95 respirator masks and surgical masks, both of which are considered porous surfaces.
Surfaces may be decontaminated with 62–71 percent ethanol, 50–100 percent isopropanol, 0.1 percent sodium hypochlorite, 0.5 percent hydrogen peroxide, and 0.2–7.5 percent povidone-iodine. Other solutions, such as benzalkonium chloride and chlorhexidine gluconate, are less effective. Ultraviolet germicidal irradiation may also be used. The CDC recommends that if a COVID-19 case is suspected or confirmed at a facility such as an office or day care, all areas such as offices, bathrooms, common areas, shared electronic equipment like tablets, touch screens, keyboards, remote controls, and ATM machines used by the ill persons should be disinfected. A datasheet comprising the authorised substances to disinfection in the food industry (including suspension or surface tested, kind of surface, use dilution, disinfectant and inocuylum volumes) can be seen in the supplementary material of.
VENTILATION AND AIR FILTRATION
The WHO recommends ventilation and air filtration in public spaces to help clear out infectious aerosols.
HEALTHY DIET AND LIFESTYLE
The Harvard T.H. Chan School of Public Health recommends a healthy diet, being physically active, managing psychological stress, and getting enough sleep.
While there is no evidence that vitamin D is an effective treatment for COVID-19, there is limited evidence that vitamin D deficiency increases the risk of severe COVID-19 symptoms. This has led to recommendations for individuals with vitamin D deficiency to take vitamin D supplements as a way of mitigating the risk of COVID-19 and other health issues associated with a possible increase in deficiency due to social distancing.
TREATMENT
There is no specific, effective treatment or cure for coronavirus disease 2019 (COVID-19), the disease caused by the SARS-CoV-2 virus. Thus, the cornerstone of management of COVID-19 is supportive care, which includes treatment to relieve symptoms, fluid therapy, oxygen support and prone positioning as needed, and medications or devices to support other affected vital organs.
Most cases of COVID-19 are mild. In these, supportive care includes medication such as paracetamol or NSAIDs to relieve symptoms (fever, body aches, cough), proper intake of fluids, rest, and nasal breathing. Good personal hygiene and a healthy diet are also recommended. The U.S. Centers for Disease Control and Prevention (CDC) recommend that those who suspect they are carrying the virus isolate themselves at home and wear a face mask.
People with more severe cases may need treatment in hospital. In those with low oxygen levels, use of the glucocorticoid dexamethasone is strongly recommended, as it can reduce the risk of death. Noninvasive ventilation and, ultimately, admission to an intensive care unit for mechanical ventilation may be required to support breathing. Extracorporeal membrane oxygenation (ECMO) has been used to address the issue of respiratory failure, but its benefits are still under consideration.
Several experimental treatments are being actively studied in clinical trials. Others were thought to be promising early in the pandemic, such as hydroxychloroquine and lopinavir/ritonavir, but later research found them to be ineffective or even harmful. Despite ongoing research, there is still not enough high-quality evidence to recommend so-called early treatment. Nevertheless, in the United States, two monoclonal antibody-based therapies are available for early use in cases thought to be at high risk of progression to severe disease. The antiviral remdesivir is available in the U.S., Canada, Australia, and several other countries, with varying restrictions; however, it is not recommended for people needing mechanical ventilation, and is discouraged altogether by the World Health Organization (WHO), due to limited evidence of its efficacy.
PROGNOSIS
The severity of COVID-19 varies. The disease may take a mild course with few or no symptoms, resembling other common upper respiratory diseases such as the common cold. In 3–4% of cases (7.4% for those over age 65) symptoms are severe enough to cause hospitalization. Mild cases typically recover within two weeks, while those with severe or critical diseases may take three to six weeks to recover. Among those who have died, the time from symptom onset to death has ranged from two to eight weeks. The Italian Istituto Superiore di Sanità reported that the median time between the onset of symptoms and death was twelve days, with seven being hospitalised. However, people transferred to an ICU had a median time of ten days between hospitalisation and death. Prolonged prothrombin time and elevated C-reactive protein levels on admission to the hospital are associated with severe course of COVID-19 and with a transfer to ICU.
Some early studies suggest 10% to 20% of people with COVID-19 will experience symptoms lasting longer than a month.[191][192] A majority of those who were admitted to hospital with severe disease report long-term problems including fatigue and shortness of breath. On 30 October 2020 WHO chief Tedros Adhanom warned that "to a significant number of people, the COVID virus poses a range of serious long-term effects". He has described the vast spectrum of COVID-19 symptoms that fluctuate over time as "really concerning." They range from fatigue, a cough and shortness of breath, to inflammation and injury of major organs – including the lungs and heart, and also neurological and psychologic effects. Symptoms often overlap and can affect any system in the body. Infected people have reported cyclical bouts of fatigue, headaches, months of complete exhaustion, mood swings, and other symptoms. Tedros has concluded that therefore herd immunity is "morally unconscionable and unfeasible".
In terms of hospital readmissions about 9% of 106,000 individuals had to return for hospital treatment within 2 months of discharge. The average to readmit was 8 days since first hospital visit. There are several risk factors that have been identified as being a cause of multiple admissions to a hospital facility. Among these are advanced age (above 65 years of age) and presence of a chronic condition such as diabetes, COPD, heart failure or chronic kidney disease.
According to scientific reviews smokers are more likely to require intensive care or die compared to non-smokers, air pollution is similarly associated with risk factors, and pre-existing heart and lung diseases and also obesity contributes to an increased health risk of COVID-19.
It is also assumed that those that are immunocompromised are at higher risk of getting severely sick from SARS-CoV-2. One research that looked into the COVID-19 infections in hospitalized kidney transplant recipients found a mortality rate of 11%.
See also: Impact of the COVID-19 pandemic on children
Children make up a small proportion of reported cases, with about 1% of cases being under 10 years and 4% aged 10–19 years. They are likely to have milder symptoms and a lower chance of severe disease than adults. A European multinational study of hospitalized children published in The Lancet on 25 June 2020 found that about 8% of children admitted to a hospital needed intensive care. Four of those 582 children (0.7%) died, but the actual mortality rate could be "substantially lower" since milder cases that did not seek medical help were not included in the study.
Genetics also plays an important role in the ability to fight off the disease. For instance, those that do not produce detectable type I interferons or produce auto-antibodies against these may get much sicker from COVID-19. Genetic screening is able to detect interferon effector genes.
Pregnant women may be at higher risk of severe COVID-19 infection based on data from other similar viruses, like SARS and MERS, but data for COVID-19 is lacking.
COMPLICATIONS
Complications may include pneumonia, acute respiratory distress syndrome (ARDS), multi-organ failure, septic shock, and death. Cardiovascular complications may include heart failure, arrhythmias, heart inflammation, and blood clots. Approximately 20–30% of people who present with COVID-19 have elevated liver enzymes, reflecting liver injury.
Neurologic manifestations include seizure, stroke, encephalitis, and Guillain–Barré syndrome (which includes loss of motor functions). Following the infection, children may develop paediatric multisystem inflammatory syndrome, which has symptoms similar to Kawasaki disease, which can be fatal. In very rare cases, acute encephalopathy can occur, and it can be considered in those who have been diagnosed with COVID-19 and have an altered mental status.
LONGER-TERM EFFECTS
Some early studies suggest that that 10 to 20% of people with COVID-19 will experience symptoms lasting longer than a month. A majority of those who were admitted to hospital with severe disease report long-term problems, including fatigue and shortness of breath. About 5-10% of patients admitted to hospital progress to severe or critical disease, including pneumonia and acute respiratory failure.
By a variety of mechanisms, the lungs are the organs most affected in COVID-19.[228] The majority of CT scans performed show lung abnormalities in people tested after 28 days of illness.
People with advanced age, severe disease, prolonged ICU stays, or who smoke are more likely to have long lasting effects, including pulmonary fibrosis. Overall, approximately one third of those investigated after 4 weeks will have findings of pulmonary fibrosis or reduced lung function as measured by DLCO, even in people who are asymptomatic, but with the suggestion of continuing improvement with the passing of more time.
IMMUNITY
The immune response by humans to CoV-2 virus occurs as a combination of the cell-mediated immunity and antibody production, just as with most other infections. Since SARS-CoV-2 has been in the human population only since December 2019, it remains unknown if the immunity is long-lasting in people who recover from the disease. The presence of neutralizing antibodies in blood strongly correlates with protection from infection, but the level of neutralizing antibody declines with time. Those with asymptomatic or mild disease had undetectable levels of neutralizing antibody two months after infection. In another study, the level of neutralizing antibody fell 4-fold 1 to 4 months after the onset of symptoms. However, the lack of antibody in the blood does not mean antibody will not be rapidly produced upon reexposure to SARS-CoV-2. Memory B cells specific for the spike and nucleocapsid proteins of SARS-CoV-2 last for at least 6 months after appearance of symptoms. Nevertheless, 15 cases of reinfection with SARS-CoV-2 have been reported using stringent CDC criteria requiring identification of a different variant from the second infection. There are likely to be many more people who have been reinfected with the virus. Herd immunity will not eliminate the virus if reinfection is common. Some other coronaviruses circulating in people are capable of reinfection after roughly a year. Nonetheless, on 3 March 2021, scientists reported that a much more contagious Covid-19 variant, Lineage P.1, first detected in Japan, and subsequently found in Brazil, as well as in several places in the United States, may be associated with Covid-19 disease reinfection after recovery from an earlier Covid-19 infection.
MORTALITY
Several measures are commonly used to quantify mortality. These numbers vary by region and over time and are influenced by the volume of testing, healthcare system quality, treatment options, time since the initial outbreak, and population characteristics such as age, sex, and overall health. The mortality rate reflects the number of deaths within a specific demographic group divided by the population of that demographic group. Consequently, the mortality rate reflects the prevalence as well as the severity of the disease within a given population. Mortality rates are highly correlated to age, with relatively low rates for young people and relatively high rates among the elderly.
The case fatality rate (CFR) reflects the number of deaths divided by the number of diagnosed cases within a given time interval. Based on Johns Hopkins University statistics, the global death-to-case ratio is 2.2% (2,685,770/121,585,388) as of 18 March 2021. The number varies by region. The CFR may not reflect the true severity of the disease, because some infected individuals remain asymptomatic or experience only mild symptoms, and hence such infections may not be included in official case reports. Moreover, the CFR may vary markedly over time and across locations due to the availability of live virus tests.
INFECTION FATALITY RATE
A key metric in gauging the severity of COVID-19 is the infection fatality rate (IFR), also referred to as the infection fatality ratio or infection fatality risk. This metric is calculated by dividing the total number of deaths from the disease by the total number of infected individuals; hence, in contrast to the CFR, the IFR incorporates asymptomatic and undiagnosed infections as well as reported cases.
CURRENT ESTIMATES
A December 2020 systematic review and meta-analysis estimated that population IFR during the first wave of the pandemic was about 0.5% to 1% in many locations (including France, Netherlands, New Zealand, and Portugal), 1% to 2% in other locations (Australia, England, Lithuania, and Spain), and exceeded 2% in Italy. That study also found that most of these differences in IFR reflected corresponding differences in the age composition of the population and age-specific infection rates; in particular, the metaregression estimate of IFR is very low for children and younger adults (e.g., 0.002% at age 10 and 0.01% at age 25) but increases progressively to 0.4% at age 55, 1.4% at age 65, 4.6% at age 75, and 15% at age 85. These results were also highlighted in a December 2020 report issued by the WHO.
EARLIER ESTIMATES OF IFR
At an early stage of the pandemic, the World Health Organization reported estimates of IFR between 0.3% and 1%.[ On 2 July, The WHO's chief scientist reported that the average IFR estimate presented at a two-day WHO expert forum was about 0.6%. In August, the WHO found that studies incorporating data from broad serology testing in Europe showed IFR estimates converging at approximately 0.5–1%. Firm lower limits of IFRs have been established in a number of locations such as New York City and Bergamo in Italy since the IFR cannot be less than the population fatality rate. As of 10 July, in New York City, with a population of 8.4 million, 23,377 individuals (18,758 confirmed and 4,619 probable) have died with COVID-19 (0.3% of the population).Antibody testing in New York City suggested an IFR of ~0.9%,[258] and ~1.4%. In Bergamo province, 0.6% of the population has died. In September 2020 the U.S. Center for Disease Control & Prevention reported preliminary estimates of age-specific IFRs for public health planning purposes.
SEX DIFFERENCES
Early reviews of epidemiologic data showed gendered impact of the pandemic and a higher mortality rate in men in China and Italy. The Chinese Center for Disease Control and Prevention reported the death rate was 2.8% for men and 1.7% for women. Later reviews in June 2020 indicated that there is no significant difference in susceptibility or in CFR between genders. One review acknowledges the different mortality rates in Chinese men, suggesting that it may be attributable to lifestyle choices such as smoking and drinking alcohol rather than genetic factors. Sex-based immunological differences, lesser prevalence of smoking in women and men developing co-morbid conditions such as hypertension at a younger age than women could have contributed to the higher mortality in men. In Europe, 57% of the infected people were men and 72% of those died with COVID-19 were men. As of April 2020, the US government is not tracking sex-related data of COVID-19 infections. Research has shown that viral illnesses like Ebola, HIV, influenza and SARS affect men and women differently.
ETHNIC DIFFERENCES
In the US, a greater proportion of deaths due to COVID-19 have occurred among African Americans and other minority groups. Structural factors that prevent them from practicing social distancing include their concentration in crowded substandard housing and in "essential" occupations such as retail grocery workers, public transit employees, health-care workers and custodial staff. Greater prevalence of lacking health insurance and care and of underlying conditions such as diabetes, hypertension and heart disease also increase their risk of death. Similar issues affect Native American and Latino communities. According to a US health policy non-profit, 34% of American Indian and Alaska Native People (AIAN) non-elderly adults are at risk of serious illness compared to 21% of white non-elderly adults. The source attributes it to disproportionately high rates of many health conditions that may put them at higher risk as well as living conditions like lack of access to clean water. Leaders have called for efforts to research and address the disparities. In the U.K., a greater proportion of deaths due to COVID-19 have occurred in those of a Black, Asian, and other ethnic minority background. More severe impacts upon victims including the relative incidence of the necessity of hospitalization requirements, and vulnerability to the disease has been associated via DNA analysis to be expressed in genetic variants at chromosomal region 3, features that are associated with European Neanderthal heritage. That structure imposes greater risks that those affected will develop a more severe form of the disease. The findings are from Professor Svante Pääbo and researchers he leads at the Max Planck Institute for Evolutionary Anthropology and the Karolinska Institutet. This admixture of modern human and Neanderthal genes is estimated to have occurred roughly between 50,000 and 60,000 years ago in Southern Europe.
COMORBIDITIES
Most of those who die of COVID-19 have pre-existing (underlying) conditions, including hypertension, diabetes mellitus, and cardiovascular disease. According to March data from the United States, 89% of those hospitalised had preexisting conditions. The Italian Istituto Superiore di Sanità reported that out of 8.8% of deaths where medical charts were available, 96.1% of people had at least one comorbidity with the average person having 3.4 diseases. According to this report the most common comorbidities are hypertension (66% of deaths), type 2 diabetes (29.8% of deaths), Ischemic Heart Disease (27.6% of deaths), atrial fibrillation (23.1% of deaths) and chronic renal failure (20.2% of deaths).
Most critical respiratory comorbidities according to the CDC, are: moderate or severe asthma, pre-existing COPD, pulmonary fibrosis, cystic fibrosis. Evidence stemming from meta-analysis of several smaller research papers also suggests that smoking can be associated with worse outcomes. When someone with existing respiratory problems is infected with COVID-19, they might be at greater risk for severe symptoms. COVID-19 also poses a greater risk to people who misuse opioids and methamphetamines, insofar as their drug use may have caused lung damage.
In August 2020 the CDC issued a caution that tuberculosis infections could increase the risk of severe illness or death. The WHO recommended that people with respiratory symptoms be screened for both diseases, as testing positive for COVID-19 couldn't rule out co-infections. Some projections have estimated that reduced TB detection due to the pandemic could result in 6.3 million additional TB cases and 1.4 million TB related deaths by 2025.
NAME
During the initial outbreak in Wuhan, China, the virus and disease were commonly referred to as "coronavirus" and "Wuhan coronavirus", with the disease sometimes called "Wuhan pneumonia". In the past, many diseases have been named after geographical locations, such as the Spanish flu, Middle East Respiratory Syndrome, and Zika virus. In January 2020, the WHO recommended 2019-nCov and 2019-nCoV acute respiratory disease as interim names for the virus and disease per 2015 guidance and international guidelines against using geographical locations (e.g. Wuhan, China), animal species, or groups of people in disease and virus names in part to prevent social stigma. The official names COVID-19 and SARS-CoV-2 were issued by the WHO on 11 February 2020. Tedros Adhanom explained: CO for corona, VI for virus, D for disease and 19 for when the outbreak was first identified (31 December 2019). The WHO additionally uses "the COVID-19 virus" and "the virus responsible for COVID-19" in public communications.
HISTORY
The virus is thought to be natural and of an animal origin, through spillover infection. There are several theories about where the first case (the so-called patient zero) originated. Phylogenetics estimates that SARS-CoV-2 arose in October or November 2019. Evidence suggests that it descends from a coronavirus that infects wild bats, and spread to humans through an intermediary wildlife host.
The first known human infections were in Wuhan, Hubei, China. A study of the first 41 cases of confirmed COVID-19, published in January 2020 in The Lancet, reported the earliest date of onset of symptoms as 1 December 2019.Official publications from the WHO reported the earliest onset of symptoms as 8 December 2019. Human-to-human transmission was confirmed by the WHO and Chinese authorities by 20 January 2020. According to official Chinese sources, these were mostly linked to the Huanan Seafood Wholesale Market, which also sold live animals. In May 2020 George Gao, the director of the CDC, said animal samples collected from the seafood market had tested negative for the virus, indicating that the market was the site of an early superspreading event, but that it was not the site of the initial outbreak.[ Traces of the virus have been found in wastewater samples that were collected in Milan and Turin, Italy, on 18 December 2019.
By December 2019, the spread of infection was almost entirely driven by human-to-human transmission. The number of coronavirus cases in Hubei gradually increased, reaching 60 by 20 December, and at least 266 by 31 December. On 24 December, Wuhan Central Hospital sent a bronchoalveolar lavage fluid (BAL) sample from an unresolved clinical case to sequencing company Vision Medicals. On 27 and 28 December, Vision Medicals informed the Wuhan Central Hospital and the Chinese CDC of the results of the test, showing a new coronavirus. A pneumonia cluster of unknown cause was observed on 26 December and treated by the doctor Zhang Jixian in Hubei Provincial Hospital, who informed the Wuhan Jianghan CDC on 27 December. On 30 December, a test report addressed to Wuhan Central Hospital, from company CapitalBio Medlab, stated an erroneous positive result for SARS, causing a group of doctors at Wuhan Central Hospital to alert their colleagues and relevant hospital authorities of the result. The Wuhan Municipal Health Commission issued a notice to various medical institutions on "the treatment of pneumonia of unknown cause" that same evening. Eight of these doctors, including Li Wenliang (punished on 3 January), were later admonished by the police for spreading false rumours and another, Ai Fen, was reprimanded by her superiors for raising the alarm.
The Wuhan Municipal Health Commission made the first public announcement of a pneumonia outbreak of unknown cause on 31 December, confirming 27 cases—enough to trigger an investigation.
During the early stages of the outbreak, the number of cases doubled approximately every seven and a half days. In early and mid-January 2020, the virus spread to other Chinese provinces, helped by the Chinese New Year migration and Wuhan being a transport hub and major rail interchange. On 20 January, China reported nearly 140 new cases in one day, including two people in Beijing and one in Shenzhen. Later official data shows 6,174 people had already developed symptoms by then, and more may have been infected. A report in The Lancet on 24 January indicated human transmission, strongly recommended personal protective equipment for health workers, and said testing for the virus was essential due to its "pandemic potential". On 30 January, the WHO declared the coronavirus a Public Health Emergency of International Concern. By this time, the outbreak spread by a factor of 100 to 200 times.
Italy had its first confirmed cases on 31 January 2020, two tourists from China. As of 13 March 2020 the WHO considered Europe the active centre of the pandemic. Italy overtook China as the country with the most deaths on 19 March 2020. By 26 March the United States had overtaken China and Italy with the highest number of confirmed cases in the world. Research on coronavirus genomes indicates the majority of COVID-19 cases in New York came from European travellers, rather than directly from China or any other Asian country. Retesting of prior samples found a person in France who had the virus on 27 December 2019, and a person in the United States who died from the disease on 6 February 2020.
After 55 days without a locally transmitted case, Beijing reported a new COVID-19 case on 11 June 2020 which was followed by two more cases on 12 June. By 15 June there were 79 cases officially confirmed, most of them were people that went to Xinfadi Wholesale Market.
RT-PCR testing of untreated wastewater samples from Brazil and Italy have suggested detection of SARS-CoV-2 as early as November and December 2019, respectively, but the methods of such sewage studies have not been optimised, many have not been peer reviewed, details are often missing, and there is a risk of false positives due to contamination or if only one gene target is detected. A September 2020 review journal article said, "The possibility that the COVID-19 infection had already spread to Europe at the end of last year is now indicated by abundant, even if partially circumstantial, evidence", including pneumonia case numbers and radiology in France and Italy in November and December.
MISINFORMATION
After the initial outbreak of COVID-19, misinformation and disinformation regarding the origin, scale, prevention, treatment, and other aspects of the disease rapidly spread online.
In September 2020, the U.S. CDC published preliminary estimates of the risk of death by age groups in the United States, but those estimates were widely misreported and misunderstood.
OTHER ANIMALS
Humans appear to be capable of spreading the virus to some other animals, a type of disease transmission referred to as zooanthroponosis.
Some pets, especially cats and ferrets, can catch this virus from infected humans. Symptoms in cats include respiratory (such as a cough) and digestive symptoms. Cats can spread the virus to other cats, and may be able to spread the virus to humans, but cat-to-human transmission of SARS-CoV-2 has not been proven. Compared to cats, dogs are less susceptible to this infection. Behaviors which increase the risk of transmission include kissing, licking, and petting the animal.
The virus does not appear to be able to infect pigs, ducks, or chickens at all.[ Mice, rats, and rabbits, if they can be infected at all, are unlikely to be involved in spreading the virus.
Tigers and lions in zoos have become infected as a result of contact with infected humans. As expected, monkeys and great ape species such as orangutans can also be infected with the COVID-19 virus.
Minks, which are in the same family as ferrets, have been infected. Minks may be asymptomatic, and can also spread the virus to humans. Multiple countries have identified infected animals in mink farms. Denmark, a major producer of mink pelts, ordered the slaughter of all minks over fears of viral mutations. A vaccine for mink and other animals is being researched.
RESEARCH
International research on vaccines and medicines in COVID-19 is underway by government organisations, academic groups, and industry researchers. The CDC has classified it to require a BSL3 grade laboratory. There has been a great deal of COVID-19 research, involving accelerated research processes and publishing shortcuts to meet the global demand.
As of December 2020, hundreds of clinical trials have been undertaken, with research happening on every continent except Antarctica. As of November 2020, more than 200 possible treatments had been studied in humans so far.
Transmission and prevention research
Modelling research has been conducted with several objectives, including predictions of the dynamics of transmission, diagnosis and prognosis of infection, estimation of the impact of interventions, or allocation of resources. Modelling studies are mostly based on epidemiological models, estimating the number of infected people over time under given conditions. Several other types of models have been developed and used during the COVID-19 including computational fluid dynamics models to study the flow physics of COVID-19, retrofits of crowd movement models to study occupant exposure, mobility-data based models to investigate transmission, or the use of macroeconomic models to assess the economic impact of the pandemic. Further, conceptual frameworks from crisis management research have been applied to better understand the effects of COVID-19 on organizations worldwide.
TREATMENT-RELATED RESEARCH
Repurposed antiviral drugs make up most of the research into COVID-19 treatments. Other candidates in trials include vasodilators, corticosteroids, immune therapies, lipoic acid, bevacizumab, and recombinant angiotensin-converting enzyme 2.
In March 2020, the World Health Organization (WHO) initiated the Solidarity trial to assess the treatment effects of some promising drugs: an experimental drug called remdesivir; anti-malarial drugs chloroquine and hydroxychloroquine; two anti-HIV drugs, lopinavir/ritonavir; and interferon-beta. More than 300 active clinical trials were underway as of April 2020.
Research on the antimalarial drugs hydroxychloroquine and chloroquine showed that they were ineffective at best, and that they may reduce the antiviral activity of remdesivir. By May 2020, France, Italy, and Belgium had banned the use of hydroxychloroquine as a COVID-19 treatment.
In June, initial results from the randomised RECOVERY Trial in the United Kingdom showed that dexamethasone reduced mortality by one third for people who are critically ill on ventilators and one fifth for those receiving supplemental oxygen. Because this is a well-tested and widely available treatment, it was welcomed by the WHO, which is in the process of updating treatment guidelines to include dexamethasone and other steroids. Based on those preliminary results, dexamethasone treatment has been recommended by the NIH for patients with COVID-19 who are mechanically ventilated or who require supplemental oxygen but not in patients with COVID-19 who do not require supplemental oxygen.
In September 2020, the WHO released updated guidance on using corticosteroids for COVID-19. The WHO recommends systemic corticosteroids rather than no systemic corticosteroids for the treatment of people with severe and critical COVID-19 (strong recommendation, based on moderate certainty evidence). The WHO suggests not to use corticosteroids in the treatment of people with non-severe COVID-19 (conditional recommendation, based on low certainty evidence). The updated guidance was based on a meta-analysis of clinical trials of critically ill COVID-19 patients.
WIKIPEDIA
Here is Maria sporting a very different look than she usual wears.
I actually bought this outfit for a Bishonenhouse Mira. I preordered one. They're a bit slimmer than MSDs. I think this outfit will fit her very well 'cause it's SKINTIGHT on a Narae. It wasn't easy getting it on and off her body.
Another view of Foundry's Excalibur Lite Picket Destroyer- ***Please excuse my attempt at fluff.***
This variant is equiped with extra shield generators allowing these vessels to return from the most extreme missions.
It also has duel drives that had been designed for a much larger ship. When the contract for a cruiser was canceled, there was a surplus of preordered drives. A young engineer came up with this destroyer design to use the surplus drives and with his accepted proposal won the coveted Foundation award. With such a high thrust to tonnage ratio they are the fastest in their class.
The combination of sheilds and speed make up for the lack of heavy weaponry.
They were in high demand up to the moment the shipyards around the planet Foundry were destroyed in the invasion.
***
1/4 µp Microspace Destroyer
Due to the size of the flagship I needed very small ships to represent the escort ships. My intention was to have an elongated escort similer to the flagship.
Plan to add stickers to finalize the build.
The Ariel Eric Doll Set, #12 of 6000, in their display case, with the cardboard cover sleeve removed. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
Photos of my Anna and Elsa juice glasses and glass mugs by Arribas. I purchased them at the Crystal Arts shop on Main Street in Disneyland. They are identical in design and price to the ones available online at DisneyStore.com, except that these have the Disneyland logo rather than the Walt Disney World logo. The 6 oz juice glasses are $8.50 each, and the 10 oz mugs are $12.50 each. The etchings are well done, these drink-ware have thick bases, and are surprising heavy. A negative is that the mugs have a pronounced mold line down the middle of the handles, and all around to the other side. Also, next to some of the other Arribas glass drink-ware on display at the Crystal Arts shop, these items are a little plain. Some of the other glasses have full color artwork, and embedded jewels. But I think they are very pretty, and well worth the price.
Depending on the lighting, the etchings show up as either negative or positive images of Anna and Elsa. When back-lit, the etchings turn dark, and look like normal images of the Frozen sisters. When front-lit, the etchings turn bright, and look like negative images of the characters. In some of these photos, I've placed the glassware in front of images from the lithograph set that come with preordering the Frozen Blu-ray/DVD combo from the Disney Store.
My brother and I preordered this beauty when it was announced. It became my casual summer project. It's just a straight build with a blue panel wash, decals, and an acrylic topcoat.
Ain't she a beaut'?
Wishing I brought my Good Camera :D I had Preordered Cherie Babette After Swearing off Takara New Releases, But I am happy to say they hit it out of the park with this doll! She is Really lovely in person and I adore her Bearsuit haha :D YAY! New Doll High!
My pre-ordered Snow White and Hag Doll Set. The slipcover has been removed and placed next to the dolls in their unopened display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
After a long while of considering, I went ahead and preordered the event exclusive Agnes Von Weiss doll. She's not exactly Optic Verb, but does have potential for being a true show stopper. My biggest issue with her is her hair and mouth. I wish it was parted on the side or come with more length for styling options. I am not used to splurging a lot on a doll, but now that I'm able to get them at retail price, I am not restraining myself as much. I also love the fact that she was the club exclusive and available with so many extra goodies, Overall, I'm very happy with preordering her.
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
People call it the “crown jewel” of the Oregon State Parks system, and once you visit, you know why. Silver Falls State Park is the kind of standout scenic treasure that puts Oregon firmly onto the national—and international—stage. Its beauty, boundless recreational opportunities and historic presence keep it there. Nestled in the foothills of Oregon’s Cascade Mountains, less than an hour east of the state capital of Salem, Oregon, the sprawling 9,200 acre property is the largest state park in Oregon, and one of the most popular.
Waterfalls: Where else can you walk behind a waterfall? Check out the famous South Falls and see what a 177-foot curtain of water looks like from behind. It’s part of the Trail of Ten Falls, a spectacular, nationally recognized hiking trail that weaves through a dense forested landscape. The trail passes a series of breathtaking waterfalls along a rocky canyon, and descends to a winding creek at the forest floor. This 7.2 mile loop is considered to be a moderate hike, with an overall elevation change of 800 feet. Several connecting trails with separate access points make shorter routes. For everyone’s safety— absolutely no pets.
Boots, bikes, paws, hooves: The park offers more than 25 miles of backcountry trails for mountain biking, hiking or horseback riding. The trails are lined with lush vegetation and remnants of old-growth forests. Wildlife is abundant. Bears and cougars live in the more remote park areas.
Daytime activities: The South Falls Day-use area has spacious lawns, barbecue stands, picnic shelters, tables, a playground, horseshoe pits, an off lead area for dogs, and a charming creek. Ever since the opening day in 1933, visitors have been using these grounds for potlucks, family reunions and weddings, all within a short walk to view the famous 177-foot South Falls.
Overnight: The main campground has tent sites, RV spots and cabins. Bring your horse and stay in the horse campground. If you need an area for many people, the park also has group tent and RV camps, dormitory-style bunkhouses (each Ranch sleeps 75) and the historic Youth Camp for up to 250 campers.
The Silver Falls Lodge and Conference Center offers a variety of amenities for all visitors to the park. Relax and enjoy comfortable lodging within the wooded setting, or feast at the many catered specialty events. Enjoy a preordered meal at the historic dining hall or order a box lunch to take on a hike or to your campsite. They also specialize in hosting special events! For more information please visit silverfallslodge.com or call 866-575-8875.
My pre-ordered Peter Pan and Captain Hook Doll Set. The slipcover has been removed to reveal the dolls in their display case.
My pre-ordered full set of the 2015 Disney Fairytale Designer Collection Heroes and Villains dolls arrived after a delay on November 6, 2015. I had ordered them at the D23 Expo on August 14, 2015. They are all edition number of 65 of 6000. They came in perfect condition, and I think most if not all the dolls are better than the ones I bought separately (which I have deboxed or will debox). By the way, I got 5 gift bags in this shipment, and got another 5 in a separate shipment. So like most people who pre-ordered the full collection, I am getting twice as many bags as I should have.
Here are my first photos of the set, taken with flash. They were taken in front of my KidKraft Snowflake Mansion. I will later take photos of my deboxed Designer dolls next to these dolls, which I will leave boxed. But before I do that I will have to debox the Rapunzel and Mother Gothel set and the Snow Queen Elsa and Hans set.
The Ariel Eric Doll Set, #12 of 6000, in their display case, with the cardboard cover sleeve removed. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported
The Limited Edition Ariel and Eric Doll Set, #12 of 6000, in their display case, with the clear acrylic cover removed. None of the factory restraints have been removed, but I have cleaned up Ariel's face a bit, and cut off a loose thread from her blouse. Photographed using built-in camera flash.
My pre-ordered Ariel and Eric Doll Set, from the Disney Fairytale Designer Collection. It arrived on October 15, 2013, and I was thrilled to see that they are numbered #012 of 6000! It matches the number of the other doll sets in the pre-order, except that Snow White and the Prince is #4508 of 6000. There are some slight scratches on the gold nameplate and on the acrylic cover of the display case, but they are very minor, and don't diminish the look of the set. Ariel's head is posed a bit awkwardly, but I'll see if I can adjust it a bit without undoing any of the shipping restraints. There is also a loose thread hanging from the left sleeve of Ariel's blouse. Otherwise, Ariel and Eric look very beautiful, and in perfect shape. I'm so happy that I have them after failing to get them in the in-store raffle earlier in the day.
I'm not going to debox the dolls in this set, but I am going to take photos of it boxed, with the cover sleeve off, and with the clear acrylic cover off, to show off the dolls as much as possible without actually removing them from their factory restraints.
Disney Fairytale Designer Collection
US Disney Store
Release In-Store: October 15, 2013
Release Online: October 16, 2013 (at 12 AM PDT)
Sold Out Online: October 16, 2013 (by 12:15 AM)
Pre-ordered at the D23 Expo, August 9, 2013
Received October 15, 2013.
#12 of 6000
Product information from the US Disney Store website:
Ariel and Prince Eric Doll Set - Disney Fairytale Designer Collection
$129.95
Item No. 6070040900891P
Above the sea
The red-headed Ariel gets her wish to be out of the sea and with her handsome prince, Eric, in this pair of limited-edition dolls. Part of the Disney Fairytale Designer Collection, they feature elegantly detailed costumes.
Magic in the details...
Please Note: Each Guest will be limited to ordering a maximum of one of this item per order.
As part of the Disney Fairytale Designer Collection this pair of Ariel and Prince Eric dolls were carefully crafted by artists inspired by Disney's 1989 movie The Little Mermaid. The Disney Princess and handsome Prince have been reimagined in exquisite detail with these limited edition dolls. Brought to life with thoughtful attention, they uniquely capture the essence of the fairytale couple, creating a one of a kind set that will be a treasured keepsake of collectors, Disney fans, and every princess at heart!
•Global Limited Editon of 6000
•Includes Certificate of Authenticity
•Ariel features her signature red curls tied back with a blue satin bow
•Rooted eyelashes
•Lacey off-shoulder neckline
•Satin and velvet bodice with embroidery and rhinestone accents
•Embroidered taffeta overlay with printed inset hemmed with lace trim at the bottom
•Prince Eric features billowy satin shirt with embroidered detailing
•Crimson sash, belt and matching boots
•Dolls sold in a special keepsake display case with intricate details on the base, including a golden plate with the name of Ariel and Eric
•Includes special Disney Fairytale Designer Collection Gift Bag
•Part of the Disney Fairytale Designer Collection
* Intended for adult collectors -- Not a child's toy.
The bare necessities
•Plastic / polyester
•Ariel: 11 1/2'' H
•Prince Eric: 12'' H
•Imported