Sponsored images from 
View allAll Photos Tagged myprojects
The XJ-4 Airspeeder was manufactured by the Narglatch Airtech much like the previous model, the XJ-2 and the later model XJ-6.
The XJ-4 is a two-seat vehicle made for the richer population in coruscant and other urban core worlds. There were different versions made of this Airspeeder such is the case of the XJ-4 vintage edition and the XJ-4 sport edition and later the XJ-4F vintage edition which was made with for seats.
This version, the vintage edition, has 288 pieces and measures:
Length: 20 studs
Width: 8 studs
Height: 9 studs
I will post the other versions in the next couple of days.
I’m thinking of inventing the rest of the XJ line of Airspeeders 🤔
What do you think?
Hope you like it!
The XJ-4 Airspeeder was manufactured by the Narglatch Airtech much like the previous model, the XJ-2 and the later model XJ-6.
The XJ-4 Sport edition, is a two-seat vehicle made for the richer population in core worlds who like to feel the trill of races and live on the edge! This absolute beauty can reach speeds up to a 880 km/h!
Notice that this version as the gear stick vertical, in opposition to the vintage version. The frontal and back fans were taken out, as well as the stair. The back of the airspeeder was also altered to have more of a sporty look. Lastly, the windscreen was also altered to go with the rest of the design.
This version, the Sport edition, has 265 pieces and measures:
Length: 20 studs
Width: 8 studs
Height: 7 studs
Hope you like it!
This was my postfor may the fourth.
Happy may the fourth everybody!
This is a model I designed a few years ago (6 or 7) of the IPV-2C stealth corvette from the clone wars series.
It is seen in the Christophsis arc.
This is also a celebration to the finale of the clone wars which was amazing!
It is not minifig scale but it does have a full interior!
Hope you like it! 😁
more pics coming soon!
*the pillowcase are either thrifted or from etsy except for the bottom right one which was a swap gift
*for the top i used the mister-made quilt but topped it off with a poly quilted throw and my recent crocheted runner thingie.
*the blocks on the headboard make me smile but i am sure i will have to take them down otherwise they will eventually fall on our heads.
*ignore that crazy mess on the right there, yet another pile threatening to topple.
Here is the final version of the XJ-4 editions. In this version the length of the airspeeder is slightly bigger to accommodate for the seats in the back.
The XJ-4F Airspeeder was manufactured by the Narglatch Airtech much like the previous model, the XJ-4 vintage edition.
The XJ-4F is a four-seat vehicle made for the richer population in coruscant and other urban core worlds.
The four seats vintage edition has 308 pieces and measures:
Length: 23 studs
Width: 8 studs
Height: 9 studs
Hope you like it!
The EasyRide passenger airspeeders, also known as Coruscant air taxis were repulsorcraft vehicles that operated on the planet Coruscant. They were used to ferry their passengers from one destination to another and were the most common airspeeders to be found in Coruscant's skylanes. Being allowed "free travel”, these air taxis were able to leave the auto-navigating skylanes in order to take the most direct means to their destination.
Hey everybody here is a poster I made with a moc I did in 2019
The moc has 545 pieces and is 23.5 cm long, 21.5 cm wide and 25.7 cm tall
I’ll post some more pics of the model later
Hope you like it! 😁
i don't really have any red or blue bedding so i hope the lanterns don't impair the prettiness of the bed....happy july!
everything on the bed this month is vintage save for one strip of fabric in the pillowcase i made...
what a year! 2010 may be a year of beds on the road and away from home...keep your
fingers crossed for me! clockwise from the top left:
*the january bed
*the february bed
*the march bed
*the april bed
*the may bed
*the june bed
*the july bed
*the august bed
*the september bed
8the october bed
*the november bed
*the december bed
a whole year of beds!
Created with fd's Flickr Toys
The Twin-228 Airspeeder was a model produced by SoroSuub. On many worlds,sush as Iridonia, was modified as a speeder truck by the addition of a cargo pod.
The speed of the Twin-228 made it a popular speeder on urban worlds while the addition of the optional cargo pod made them a popular sight on agricultural worlds as well
Max speed: 800 km/h
Length: 30 studs
Width: 12
Height: 7 studs
Here is my creation for the speeder contest created by @richboyjhae
The speeder has 404 pieces
Here is the final version of the XJ-4 editions. In this version the length of the airspeeder is slightly bigger to accommodate for the seats in the back.
The XJ-4F Airspeeder was manufactured by the Narglatch Airtech much like the previous model, the XJ-4 vintage edition.
The XJ-4F is a four-seat vehicle made for the richer population in coruscant and other urban core worlds.
The four seats vintage edition has 308 pieces and measures:
Length: 23 studs
Width: 8 studs
Height: 9 studs
Hope you like it!
Here are all the projects that I posted in 2019, which was my first year posting content.
Thank you to everyone who liked my creations and took the time to comment them and a special thank you to the people that thought my page was worth following!
I hope 2020 will be even better and full of creations!
happy new year to everyone!
The XJ-4 Airspeeder was manufactured by the Narglatch Airtech much like the previous model, the XJ-2 and the later model XJ-6.
The XJ-4 Sport edition, is a two-seat vehicle made for the richer population in core worlds who like to feel the trill of races and live on the edge! This absolute beauty can reach speeds up to a 880 km/h!
Notice that this version as the gear stick vertical, in opposition to the vintage version. The frontal and back fans were taken out, as well as the stair. The back of the airspeeder was also altered to have more of a sporty look. Lastly, the windscreen was also altered to go with the rest of the design.
This version, the Sport edition, has 265 pieces and measures:
Length: 20 studs
Width: 8 studs
Height: 7 studs
Hope you like it!
Week 9: Artistic Inspiration; "Mood" .
I had a couple ideas last week when I took this. At first I wanted to create a flow using long exposure. Instead I used lights to create motion. Finding strength and motivation again, wishing it to glow....
The true self
Hey! Here are the updates of the MTT’s design I’ve been working on
This is how the CIS version I’ll sell the instructions to will look
Hope you like it! 😁
Hey everyone, here is a moc from one of the least seen vehicles of the republic! I’ve seen some pretty good versions made but none seem to be in minifigure scale, so I decided to make that one of my guide lines!
The AT-OTs were designed as cargo walkers and troop transports by Kuat Drive Yards, differing from their other vehicles, which were usually combat-oriented. They could carry up to 34 clone troopers, and the AT-OTs could be carried by LAATc dropships for deployment
The model has 1728 pieces and is 35 cm long, 18 cm wide and 15.6 cm tall.
It can carry 26 troopers seating, has rotating cannons on the back, the ramp comes down and the cockpit fits 1 pilot and has easy access.
One feature I really like is the fact that you can take out the middle seats and use the space for cargo (picture 7) seeing this vehicle was mainly used for transporting cargo and troops. There are also gun slots in the front.
Hope you like it! 😁
Here are the interior pics!
Because there are so many things to show, I will separate the interior in several posts (3 more or less).
In this post I am showing the smaller cockpit area which is located in the back of the Juggernaut.
I did a numbered description to help understanding what you see
The first picture shows the body detached from the chassi, it can easily be separated because it is only attached with sporadic studs (the entire moc is built this way).
The second picture shows the lowest deck of the Juggernaut.
The third picture shows how to access the smaller cockpit.
The fourth picture shows the “doors” to the cockpit and the stairs that lead to the deck below.
The fifth picture reveals the area underneath the cockpit, where the stairs lead to. It also shows the hatch that leads to the lower deck.
The sixth picture, still in the same deck as the previous one, reveals a little bit better what is a maintenance bay.
And finally, seventh picture shows the subassemblies of the cockpit area (side and top panels, decks, etc).
1 - studs that connect the MOC. Because they are so sporadic, they create enough friction to lock the subassemblies in place, but are easy to detach and prevent chunks of parts getting out of place.
2 - the lowest deck of the juggernaut, this is the area where the back entrance is accessed.
3 - the smaller cockpit. It has 2 seats pilot and copilot, which also works as a gunner. I tried making this as accurate to the cross sections of the movie has possible!
4 - ladder that gives access to the lower deck. In front of the ladder there’s a corridor and a hatch (not visible in the picture)
5 - maintenance bay. It has 4 small hatches that give access to wires and controls inside. This area can be replaced with a armory, I haven’t decided yet.
I will be posting more pics in the next few days
Hope you like it! 😁