View allAll Photos Tagged Microprocessors
----
SB80dx into 90x60cm stripbox up and behind subject angled down
Small white fill card below
fired via PocketWizard PlusII
----
I scavanged alot of C64`s because of SIDs, but this is the first time I found one soldered directly to the board. ???
Intel Seattle SE440BX-2 Motherboard, Intel Pentium III 450 MHz, 512K Cache, 100 MHz FSB CPU, Audio & Graphics Cards
Taken from a working system. No longer required and taking up valuable space. Included in this sale are:
• Motherboard: INTEL Seattle SE440BX 450 MHz, 512K Cache, 100 MHz FSB, 1-Slot (AA 720930-213)
• Processor: INTEL Pentium III 450 MHz
• CPU Heatsink: Cooling Fan With CPU
• VGA Card: Matrox Millennium G400 / DualHead (Model 159512-B21 - Dual Display)
• Audio Card: Creative Labs Sound Blaster 64 PCI (Model ES1371)
• ISDN Faxmodem Card: Microcom 56K, internal, PCI (Model Teles.S0/16.3c PnP)
• Network Card: SMC1233TX 10/100 PCI Network Card
• Connected switches, LEDs and system loudspeaker
Sold as seen, without guarantee. Please ensure that items work with your setup before purchase.
Grab yourself a bargain, and happy bidding!
What do you do before you take a hammer to an old compact flash card which has so little memory it's laughable? (I *might* fit one photo on it if I'm lucky - but only if it's not RAW format).
Take it apart and photograph it of course! Interestingly, this Kodak branded CF card has SanDisk written all over it inside...
LPC2478 development board with TFT LCD.
Features:
MCU: ARM7 LPC2478
NOR Flash 4MB
SDRAM 32MB
LCD 5.6" 640x480 24bit color TFT with Touchscreen
Ethernet interface
CAN interface
SD/MMC card connector
miniUSB USB-device 2.0 full speed
USB Host interface
USB-B (USB-UART FT232RL based)
JTAG interface
This is actually the jumper pins from the Netcomm NB1300Plus4 that allows you to put the modem into program mode.
This is a close up of the business end of a Moog Little Phatty CV Out mod (1st gen) on a Tribute edition. The Orange wire is said to be the CV Pitch output and is taken prior to the Summing of the Pitch CV; the result is that Pitch Bend and Portamento do not affect the outgoing Pitch control voltage. This is both good or bad depending on your perspective; there is a procedure to correct/circumvent this; contact Moog Music Technical support for details.