View allAll Photos Tagged LegoCustom
I am working on the Building instructions of my last MOCs and am trying to make It more professionnal for a project with @elevenbricks11 (Stay tuned for that! 😉). I change my software. I will use Stud.io so I try different things as the Render FUNCTION!
#lego #legoinstagram #legobuilder #ablegobuilders #legomoc #legomocs #legodc #legodccomics #legobatman #batman #dccomics #batverse #arkhamasylum #youtube #update #wip #gcpd #gotham #gothampolice #vehicles #car #truck #animatedseries #batmantheanimatedseries #minifig #minifigures #legominifigs #legocustom #robin #batmobile
So, this is my take on the characters from third adventurers subtheme - Dino Island. The characters from left to right are: Mr. Cunningham, Alexia Sinister, Sam Sinister (Barron von Barron (who knows)), Johnny Thunder, Mike, Pippin Reed and prof. Charles Lightning. Here's the thing, first figure I made was Alexia, then I made the good guys, and then I didn't know how to make Cunningham so I decided to look up customs from other builders, and I saw that @gunnbuilding used the same head and torso combo that I planned to use. Trust me, it was a coincidence. Anyways, I borrowed his design for Cunningham so, I hope you don't mind @gunnbuilding . Anyways, I hope you like them!
My custom of Hawkgirl🐣 The helmet is made of plastic by me and the wings are made of imitation leather)
I realised I never uploaded this photo once I'd updated the DAK version, I uploaded the rear shot but not from the front. Has posable front steering. It does have a steering wheel also but it can't be seen from this angle.
I went with the metallic rims as I needed to be able to have the same hub caps on a dark bley version and as there aren't any 12 tooth gears in dark bley i had to go outside of the gears and so these fit the closest. Otherwise I would have used tan 12 tooth gears if it was a stand alone model. I suppose I could use black gears on the bley version but they are in short supply!
So as always I tinkered again, now I've just got to update all the other 6 to match!
New curved roof
New side doors
New curves in wheel arches
New hood
New rear door and mechanism
New mirrors
Bonnet can be removed in one piece to access engine area which has details also.
The whole inside has been redone also to add strength and lessen parts not needed.
Oh and I added steering in the front and suspension to a degree as well.
I'm sure I've forgotten what else I changed or added..will amend if I remember later.
"This is my Humvee..there are many like it..but this one is mine"
The third section is depicting the area between opposing trench lines known as “no man’s land”. Attacks, even if successful, often sustained severe casualties because of being fully exposed to gun fire from both sides.
Mimbanese trench raids aimed at forcing temporary entry into the enemy’s line in order to destroy fortification and artillery. The Mimbanese attackers are wearing camouflaged uniforms in order to get as close as possible without being seen.
To counter that, the Empire is using lines of barbed wire to slow down and entangle attacking infantry while shooting them with E-web repeating blasters, protected within their bunkers!
Even if the Mimbanese are very brave, they seem to be fighting a loosing battle…
This is the final section I will be making, I hope you like it, any shares and feedback will be really appreciated! Let me know if you would like to see the three section combined!
Here is my #bringbacklegocastle build for January and it’s the Set 6057 Sea Serpent. I had this set as a child and absolutely loved it. Also it was my only set with #legoblackfalcon knights!
As with my December build I wanted to design it as it would be an official #LEGO set and tried to keep it as simply as possible (okay that didn’t work out in every way again😅) I changed the blue colour of the ship fitting to the black knights, which I gave the colour dark red in my last build. The hull is snotted with curved slopes like my Calderian Scouting Ship.
Finished product of my Autumn Oakleaf after many months of testing and experimenting. Turned out pretty good, except for the paint that sort of became 3D. Will try to fix that in the future.
-
-
Pouches used come from a Dragon Model kit. If you notice you can see that the string (or whatever it’s called) at the collar is an actual piece of string.
-
-
Let me know in the comments about what you think about it! -
-
#lego #legocustoms #legomilitary #legoww2 #legowwii #legogerman #legowaffenss #waffenss #worldwar2 #ww2 #military #legocustomization #customlego #brickmania #handpainted #custom #camo #ww2history #ww2camo #toyphotography
I am working on the Building instructions of my last MOCs and am trying to make It more professionnal for a project with @elevenbricks11 (Stay tuned for that! 😉). I change my software. I will use Stud.io so I try different things as the Render FUNCTION!
#lego #legoinstagram #legobuilder #ablegobuilders #legomoc #legomocs #legodc #legodccomics #legobatman #batman #dccomics #batverse #arkhamasylum #youtube #update #wip #gcpd #gotham #gothampolice #vehicles #car #truck #animatedseries #batmantheanimatedseries #minifig #minifigures #legominifigs #legocustom #robin #batmobile
Another of my display stands..once again ive used "Lifelites" to light underneath for a cool effect..credit to Maclain for the cubedude face..still find building these fun..one more planned and i will leave them for a while..did my best for a canadian Maple Leaf in the middle with what i had..quick fun builds..really cool to have on your desk..now go make one! Also im ok with the new "following" thing..just a name change as far as i can see.
A revamp of last year's "Cobold's Crusaders". I made changes to Cobold and Ayra, and removed Charis altogether.
Built for Guilds of Historica (GoH) on Eurobricks (link below):
www.eurobricks.com/forum/index.php?/forums/topic/190237-f...
Not sure if anyone has done these combos before.
Left to Right: Killmonger, Okoye and Black Panther.
Follow me for more LEGO Marvel and DC Creations!
💡The MOC is now on LEGO Ideas and I really would appreciate your support!
This is a remake of the Set 6059.
I have a special connection to the Set, because the parallel group in kindergarden had it and sometimes I could play with it - really dig those hinges!
The twist: I wanted to design it as it would be an official #LEGO set. So I used large pieces for example and tried to keep it as simply as possible (okay that didn’t work out in every way😅, but hey, I tried!). Also I tried to incorporate as many play features as possible. So here you go.. Would you buy this set today? 😉
"The orcs of Moria, also at times referred to as goblins, were creatures that resided in Moria during the time of the
War of the Ring."
This is my very first batch of Moria orcs. I'm very pleased with how they turned out, and they took a lot of time to make, but there will likely be more batches of these in the future.
All of these figures are almost completely painted, with custom swords, a semi-custom spear, and a custom bow and arrow, all made to resemble the weapons of the Moria orcs from the first LOTR film. The far left orc has a custom sculpted armour piece and shoulder pads, and all of them have fully painted heads & faces as well as custom hairpieces with ears.
Hope you enjoy, C&C is welcome as always,
and please comment if you fave - I'd appreciate it.
Found deep within the oceans of Historica, the Giant Valyrian Anglerfish is only seen by surface dwellers when its corpse washes ashore.
Like other species of anglerfish, it is subject to extreme sexual dimorphism between females (measuring roughly 30 feet in length) and males (measuring roughy 5 feet in length).
Built as part of CCC XX (Fantasy Creatures category) and part of my entry for BricksCalibur (Labor of Love Category).
Those are my #bringbacklegocastle build for February &March. It’s a series of set-like MOCs. I try to keep the design as simple as possible, although sometimes I overdo it, so that’s why I like to call it advanced-set-design. Those two are based on 6035 - Castle Guard and 6009 - Black Knight. Imagine sets like those would come out today. They’d be such good army builders.
What do you guys think? Would you buy it today?
My custom Lego minifigure of Bolg, son of Azog the Defiler from the Hobbit. My most favorite one of all my customs. I made him from Lego Azog. The armor is made from faux leather and plasticine which dries on the air. Painted with Citadel and Game Color acrylic paints. I also used Warhammer parts for boots
Sorry I haven’t been on in about a year but I’m going to try and start again so here is my DC FigBarf
Top:
Scarecrow
Beach/The killing joke Joker
Gentlemen Ghost
Hush
Bottom:
BTAS Batman (waiting for the 2020 CMF to update it)
BTAS Phantasm
(Both of the BTAS is done to death but they still look alright)
The planet Mimban possesses deep hyperbaride mineral deposits making it a strategic location to own.
The 224th Imperial Armored Division was deployed on Mimban to subjugate the Mimbanese and ensure Imperial energy mining operations continued unabated.
The battle conditions were terrible: the ionized atmosphere prevented air support most of the time, the surface was muddy and sliding so it was really hard to progress, the Mimbanese had the unsettling ability to disappear in the mud and murk of their homeworld...
Because of that the Empire quickly realized that it wouldn't be easy to defeat and dominate the Mimbanese so they decided to use the trench warfare strategy to defend their own position strongly…
Imperial gunners were operating Howitzer to fire high explosive shells and smash enemy guns and critical positions. The Empire army used as well lines of barbed wire to slow down and entangle attacking infantry while shooting them with E-web repeating blasters, protected within their bunkers making it very difficult for the Mimbanese to get any success!
Despite all those defenses Mimbanese were attacking the Empire positions!
Their trench raids aimed at forcing temporary entry into the enemy’s line in order to destroy fortification and artillery. The Mimbanese attackers were wearing camouflaged uniforms in order to get as close as possible without being seen in order to cross the worst place to be: the area between opposing trench lines known as “no man’s land”.
Attacks, even if successful, often sustained severe casualties because of being fully exposed to gun fire from both sides.
So even if the Mimbanese were very brave, they seem to be fighting a losing battle…
The Assault Amphibious Vehicle (AAV)—official designation AAV-7A1 (formerly known as Landing Vehicle, Tracked, Personnel-7 abbr. LVTP-7)—is a fully tracked amphibious landing vehicle manufactured by U.S. Combat Systems (previously by United Defense, a former division of FMC Corporation).
The AAV-7A1 is the current amphibious troop transport of the United States Marine Corps. It is used by U.S. Marine Corps Assault Amphibian Battalions to land the surface assault elements of the landing force and their equipment in a single lift from assault shipping during amphibious operations to inland objectives and to conduct mechanized operations and related combat support in subsequent mechanized operations ashore. It is also operated by other forces. Marines call them "amtracks," a shortening of their original designation, "amphibious tractor."
A model thats been on my list for quite some time..seats 8 inside..maybe more if i mess around..here you can see the upper doors open with troops standing ready to dismount once they clear the water..just wanted to show that area so left it open.. support appreciated guys.. Semper Fi do or die OORAH!!!
Dietrich and Petrov meet up with an old friend from US special forces.
Thought I'd shoot a pic of the WULF with the Humvee ; )
Oh I referred Richard Goff but it look similar with hos multicam operator (Sorry... Richard...). I tried to custom Desert Camo version... Sadly the Tan color was empty... so I custom multicam version I will custom Spetznatz or FSB