In this configuration, the UNGAWP is equipped with an ARCHON turret capable of deterring and neutralizing unmanned aircraft systems. ARCHON helps mitigate threats by disrupting the electronic signals between the UAS and its controller. It detects, identifies, neutralizes, and warns soldiers of the threat of a possible drone, or multiple drones (up to 10 simultaneously) overhead, thanks to a powerful integrated computer. It has a range of 3km, and can be placed on any terrain.

takhyuncustombrick.com/

Custom LEGO AFOL

Female Gears, Sergeant Alexandra Blaine (left) and Private Mia Sloane (right).

Check out another of our top quality custom printed Minifigures.

Made using high quality UV Printing.

Find these and many other figures from Atomic Bricks

Comment !

To be continued....

Atomic Bricks offically sells Pop-Culture Customs Printed Minifigures.

Apocalypse's are now in stock on our website atomicbricks

Grab them while you can.

Features high quality printing.

Comment !

To be continued....

A Lego figure which i did some time ago. My handmade work from another account crescentglade

Captain America when he's not busy saving the world.

A Lego figure which i did some time ago. My handmade work from another account crescentglade

LEGO Toyota Tundra XK70 6pin-wide MOC by 2MkGarage

youtube.com/shorts/bWdI0lo1fE4

main chanel - www.youtube.com/c/2MonkeysStudio

second chanel with video-tutorial - www.youtube.com/@2MKGarageInstructions

instagram - www.instagram.com/2mk_garage/?igshid=M2RkZGJiMzhjOQ%3D%3D...

A closer view of a couple of the custom Lancers used recently.

Progress on the M.A.S.K Rhino Trailer. I will complete the external trailer first before adding in all the firepower, command center into this build. Now for the painful part - waiting for parts from Germany and US to arrive in Singapore.

Part of me feels that it is a huge missed opportunity that Rhino never had an official trailer. It just doesn't feel complete ( imagine Optimus Prime without its battle station trailer ) Hopefully the rumored M.A.S.K movie remake will give the rhino justice in the future.

#lego #legosg #legomoc #kenner #kennertoys #kennermask #kennermasktoys #hasbro #mask #mobilearmoredstrikekommand #Rhino #80s #childhoodmemories #mattrakker #cartoon #80scartoons #legophotography #legophoto #legophotographer #toyphotography #legostagram #legoinstagram #brickcentral #Custom #legocustom #moccentral

Simple build, but captured the look I was going for.

SBD 10001 French Palace, Modular Lego House. Design by Stefano Mapelli ©2014. info@stebrick.com

Buy Instructions at: stebrick.e-junkie.com

Blackstar Batman and Robin with upgrades from the hardac pack.

Galactic Senate clone wars, home made, with decal and paint, comes with custom blaster rifle

Side view with suspensions.

Rear view with engine on display.

Detail of the eye - Sculpture of Alex from A Clockwork Orange - inspired by the 1972 book cover designed by David Pelham - around 2,700 pieces, 15" wide x12" deep x17" high

Wayne Manor and Batcave

After seeing the treatment of both Wayne Manor and the Batcave in the second Lego Batman video game, I was inspired to build it in brick. The idea of it being shaped like the bat symbol really impressed me, especially with the challenge it presented with building it in brick; especially as the game version is simply polygons.

My scale was set by the windows, and I built out from there. After building the frame, the trick to stabilise the shape was very difficult, especially with so many hinges, but I managed to find the balance. The landscaping was kept to a minimum both for time reasons and also to not take any focus away from the manor itself.

The Batcave was a lot of fun to build and features a huge collection of LEDs to light it, including one that cycles through in the console. The suits wall was fun to build too.

I will admit, it is a little short, but perhaps one day I'll give it a little more height.

This was first displayed at Brickvention 2015 on a super heroes corner of my club's train layout and has been displayed about 15 times since both with the train layout and as it is displayed here.

One day, I'll get around to the interior of the manor...

Huntress #thepredator #brickpredator #legopredator ***

#theartoflego

#photooftheday

#legomafia

#yautja

#predatormania

#legomonsters

#хищник2018

#afol

#afolclub

#minifiguresbigworld

#alienvspredator

#brickcentral

#bricksinfocus

#brickmaster

#legoart

#custom

#legocustom

#legomaniac

#toptoyphotos

#legophotography

#legophotographer

#instatoy

#work

This is my custom batcave which adds onto the 2012 version of the set which I will show the complete version over the next couple of days let me know what you think ?

this is a figure I worked on for some time hope you enjoy him,

and also I wanted to say I have upgraded him quite

a bit since I took this photo leave a comment below if you want to see version 2.

Wayne Manor and Batcave

After seeing the treatment of both Wayne Manor and the Batcave in the second Lego Batman video game, I was inspired to build it in brick. The idea of it being shaped like the bat symbol really impressed me, especially with the challenge it presented with building it in brick; especially as the game version is simply polygons.

My scale was set by the windows, and I built out from there. After building the frame, the trick to stabilise the shape was very difficult, especially with so many hinges, but I managed to find the balance. The landscaping was kept to a minimum both for time reasons and also to not take any focus away from the manor itself.

The Batcave was a lot of fun to build and features a huge collection of LEDs to light it, including one that cycles through in the console. The suits wall was fun to build too.

I will admit, it is a little short, but perhaps one day I'll give it a little more height.

This was first displayed at Brickvention 2015 on a super heroes corner of my club's train layout and has been displayed about 15 times since both with the train layout and as it is displayed here.

One day, I'll get around to the interior of the manor...

Sonic da Hegdehog

The time has come to get mold one rolling in.

I need your help to decide which items to make

I can put 5 parts into a mold.

There will be 2 molds this year at least but I need to know which one is going to be first

Plasma Weapons Theme

or

Regular Weapons Theme

Cast your votes here, any support for the first mold on Kickstarter would be greatly appreciated fm me for details.

Prototypes are also available on my Shapeways

ordering any of them helps fund the molds to turn them into plastic parts =)

Thank you all for your votes and support =D

Dakota

Another great view of the quarry, the aqueduct and the load of slate heading for the station.

Just a little more detail of the missing arm this deadly punk vampire has! Sorry for the blood if you're squeamish I'm just trying to see what I'm good at!

Hello everyone, I decided to put all the stuff I still have avaiable for sale in order to fund future projects.

Please send me a message if you want to purchase anything or you just want to get a quote.

Follow me on Instagram: www.instagram.com/el_diorama_de_la_semana/

Street Fighter