View allAll Photos Tagged LED's,

playing around with LED's

1 gallon Plastic water jugs cut and stapled together. Lit with LED's.

Better view of the solar panel.

 

Bushard St. @ Banning Ave.

Let there be light...and there were LED's

LED's been added to majority of this type.

Week 2 Flowering under 300w LED's

Plants are in a hydroponic bucket system using Dutch Master Gold product line

www.glowdynamics.com

These rear LED's were $26 on Amazon and are great for providing light while setting up camp at night.

A test film of my Minolta MD lens 1:2.8 f=135mm mounted on a Minolta X-700 body, Lyon, France, March 29, 2023 during a 9-km photowalk from my home to the Saône river banks.

 

I own this Minolta lens MD 1:2.8 f=135mm since December 2021 (bought in France for 60€) but I never really used it beside initial technical tests when adapted to one of my two Sony A7 bodies and I never did a film with it. The 135 mm focal length (X2.5 related to the normal 50mm) is a small telephoto lens with te advantages to be still light and compact enough to be used easily hand-held and not too difficult to carry in a photo bag. The lens is equipped with a build-in collapsible shade hood plus a Minolta AC 1B (Skylight) 55mm filter that I kept for the photo session for all the views except some with a circular polarizing filter.

 

For this film, the lens is mounted on one of my two Minolta X-700, the "China" version (assembled in China 1993-1999). The camera was also equipped with its motor drive MD1 and the Minolta multi-function back. The X-700 was loaded with a B&W super-panchromatic Rollei Retro 400S (Agfa Aviphot 400) 36-exposure film.

 

The Agfa Aviphot film used for aerial photography is specially sensitized in the red, up to 780nm in the near IR instead of the regular 650-680 nm limit of a normal panchromatic film. The film provides usually high-definition and high-contrast negative views. What is more, the Agfa Aviphot is coated on a thin and flat polyester base without any base color increasing the contrast as well. However to prevent the halation possible the Agfa Aviphot is coated on the backside with a black and blue anti-halation pigment to inhibit the light back diffusion (halation). The printing from a data back was tested here to print the date on the two-first frames and the time after the last frame while setting the printing LED's intensity to the medium value available (3 diamonds) on the Minolta multi-function back (there are 6 levels of intensity available).

 

Exposures were determined using the TTL system of the Minolta X-700 in the manual mode, privileging the shadow areas.

 

Quai Joseph Gillet, March 29, 2023

69004 Lyon

France

 

After exposures the film was processed using Adox Adonal (strictly equivalent to Agfa Rodinal) developer at dilution 1+25, 20°C for 10min30. The film was then digitalized using a Sony A7 body fitted to a Minolta Slide Duplicator installed on a Minolta Auto Bellows III with a lens Minolta Bellow Macro Rokkor 50mm f/3.5. The RAW files obtained were then processed in LR and finally edited to the final jpeg pictures.

 

All views of the film are presented in the dedicated album either in the printed framed versions and unframed full-size jpeg accompanied by some documentary smartphone Vivio Y76 color pictures.

led's are fun to look at.

Items on Display at Brisbane Truck Show 2013. MACK Fairy Lights and LED's/

While driving in Rockville, MD. A LED lit license plate.

 

Comments Welcome.

Die Front-LED's des Klv's sind sehr kalt weiss :-(

The 2009 Chicago Auto Show: Cars, iMacs, and LED screens galore!

Train interior (bathrooms, with wrapped veneer of real wood - very nice!)

O vencedor da promo tendo o olho de Thundera tatuado pelo Átila do Led's Tattoo.

 

Lançamento na Loja da Ellus Limited da Oscar Freire.

São Paulo

A test film of my Minolta MD lens 1:2.8 f=135mm mounted on a Minolta X-700 body, Lyon, France, March 29, 2023 during a 9-km photowalk from my home to the Saône river banks.

 

I own this Minolta lens MD 1:2.8 f=135mm since December 2021 (bought in France for 60€) but I never really used it beside initial technical tests when adapted to one of my two Sony A7 bodies and I never did a film with it. The 135 mm focal length (X2.5 related to the normal 50mm) is a small telephoto lens with te advantages to be still light and compact enough to be used easily hand-held and not too difficult to carry in a photo bag. The lens is equipped with a build-in collapsible shade hood plus a Minolta AC 1B (Skylight) 55mm filter that I kept for the photo session for all the views except some with a circular polarizing filter.

 

For this film, the lens is mounted on one of my two Minolta X-700, the "China" version (assembled in China 1993-1999). The camera was also equipped with its motor drive MD1 and the Minolta multi-function back. The X-700 was loaded with a B&W super-panchromatic Rollei Retro 400S (Agfa Aviphot 400) 36-exposure film.

 

The Agfa Aviphot film used for aerial photography is specially sensitized in the red, up to 780nm in the near IR instead of the regular 650-680 nm limit of a normal panchromatic film. The film provides usually high-definition and high-contrast negative views. What is more, the Agfa Aviphot is coated on a thin and flat polyester base without any base color increasing the contrast as well. However to prevent the halation possible the Agfa Aviphot is coated on the backside with a black and blue anti-halation pigment to inhibit the light back diffusion (halation). The printing from a data back was tested here to print the date on the two-first frames and the time after the last frame while setting the printing LED's intensity to the medium value available (3 diamonds) on the Minolta multi-function back (there are 6 levels of intensity available).

 

Exposures were determined using the TTL system of the Minolta X-700 in the manual mode, privileging the shadow areas.

 

Montée de la Butte, March 29, 2023

69001 Lyon

France

 

After exposures the film was processed using Adox Adonal (strictly equivalent to Agfa Rodinal) developer at dilution 1+25, 20°C for 10min30. The film was then digitalized using a Sony A7 body fitted to a Minolta Slide Duplicator installed on a Minolta Auto Bellows III with a lens Minolta Bellow Macro Rokkor 50mm f/3.5. The RAW files obtained were then processed in LR and finally edited to the final jpeg pictures.

 

All views of the film are presented in the dedicated album either in the printed framed versions and unframed full-size jpeg accompanied by some documentary smartphone Vivio Y76 color pictures.

LED Street Light, is a new, energy-saving product that utilizes high power led's as light source, as one of the earliest China LED Street Light Manufacturers, Suppliers and Exporters, we are the first China LED Street Light factory who invented our ENTERI LED Street Light in 2006, it can be directly connected with a 85-264VAC power supply and can also be powered with the optional solar panel kit. The LED color spectrum, there is no ultraviolet light, no infrared rays, no heat, and no radiation produced. As a result, our LED Street Light series is a conventional "green" lighting source.

KTM windscreen (part # 76508065000) and ADVMonster Model 60 LED's installed.

 

2014 KTM 690 Enduro

Rebel Neon Ion adjustable custom mic stand with light Up HALO base. ir remote controlled multicolour LED's.

www.rebelmicstands.com

Light-emitting diodes - Not all LED’s are created equal. Poorly designed versions can skimp on efficiency, burn out much sooner than expected & provide inconsistent light. Opt for lamps which have met the energy star certification to ensure the best quality

Trying out a torch with white LED's on slate

Cold Burning Blue LED's

Time and Date function

Top row for hours display

Bottom row for minutes display

Normally sells for around USD200!

Cool factor: 3.14X

----------------------------------------

www.top-shoppingmall.com/wholesale-templar---japanese-sty...

----------------------------------------

Domestic UFO, construction details classified...

-conception:f.poujade

-lumiere led:s.mermillot sm audio

-design et realisation dentelle:v.boy

-technique generale:y.coulon

-peinture et sablage:h.gay

-sellerie:la sellerie cognaçaise

-production:raynal geoffroy invest

-photos:m.hennebert

Okay, you can see the tape holding the light bar behind it, but that is only temporary, I still need to add the rear lights to the bar. These are SMT LED's and are smaller than a gnat's nut. It is insanely time consuming to solder the leads to the LED's, but boy do they look good.

-conception:f.poujade

-lumiere led:s.mermillot sm audio

-design et realisation dentelle:v.boy

-technique generale:y.coulon

-peinture et sablage:h.gay

-sellerie:la sellerie cognaçaise

-production:raynal geoffroy invest

-photos:m.hennebert

I've been a fan of Miss Led's art for a while and i've been trying to see her do some live art for ages now. Getting to see her paint was superb.

 

Miss Led was painting at the Red Bull Fashion Factory as part of the London fashion week.

 

Please check out her art...

www.flickr.com/photos/miss_joanna_h

www.missled.co.uk/

Blue Cornhole set with blue LED's

Light stick this is in a slightly darkend room

This I got of a 'Instructables' site. Very handy to have LED's with a resistor. Fit even in a slight angle on the breadboard

1 2 ••• 64 65 67 69 70 ••• 79 80