View allAll Photos Tagged Fact

I had to look this one up- because I absolutely cannot fathom something that bright!

 

When I was a kid my mother gave me a book of true facts for Christmas and I was instantly fixated on random, useless trivia and true facts. I used to read the Trivial Pursuit cards on road trips (nerd alert), and to this day I still have a passion for the unusual and bizarre factoids.

 

Theme: Random Facts

Year Sixteen Of My 365 Project

....................................................................................

 

Domenico Modugno Lu pisci spada Teatro 10 1964

  

-----------------------------------------------------------------

 

click to activate the icon of slideshow: the small triangle inscribed in the small rectangle, at the top right, in the photostream;

or…. Press the “L” button to zoom in the image;

clicca sulla piccola icona per attivare lo slideshow: sulla facciata principale del photostream, in alto a destra c'è un piccolo rettangolo (rappresenta il monitor) con dentro un piccolo triangolo nero;

oppure…. premi il tasto “L” per ingrandire l'immagine;

 

Qi Bo's photos on Fluidr

  

Qi Bo's photos on Flickriver

  

www.worldphoto.org/sony-world-photography-awards/winners-...

  

www.fotografidigitali.it/gallery/2726/opere-italiane-segn...

 

……………………………………………………………………….

  

Acitrezza, a coastal town in eastern Sicily, a fraction of Acicastello (a town so called due to the presence of a gloomy and imposing Norman Castle which rises above the sea); Acitrezza has the prefix "Aci", which we find in nine municipalities in the province of Catania, a prefix that originates from an ancient legend that speaks of a love story between the shepherd boy Aci and the beautiful Nereid named Galatea, a marine divinity , but it is also a story of jealousy, in fact Galatea was desired by the terrible god Polyphemus (Ovid, in the XIII book of the Metamorphoses); Acitrezza is above all known to most, for having been the socio-cultural background for the novel "I Malavoglia" by the great realist writer Giovanni Verga, and for the film " The earth shakes" by the great director Luchino Visconti, a film always inspired by the novel "I Malavoglia ”; speaking of Giovanni Verga, born in Catania, I would like to underline that he was not only a famous writer, exponent of the Verismo literary current, but he was also a passionate photographer, whose photographic production was certainly influenced by his friend and writer Luigi Capuana: in Verga's photographs (for many years I have owned the book "Verga photographer") we find a particular attention to portraits (simple people, such as relatives, acquaintances, peasants, waitresses), photographs of urban and rural realities of Sicily of his time (a diatribe concerns whether or not these photographs were important cues for fueling his literary narrative production), but not only Sicily, there are photographs of landscapes such as the lakes in Lombardy, Bormio, Switzerland, which Verga visited starting from Milan where he lived for a long time. This introductory note, to talk about the photographs I took in Acitrezza on June 24th of this year: the first photos I post (in the slideshow, as in the photostream, they will be the last to appear) there are portraits of some very nice members of the Lega Navale di Acitrezza who performed in a very particular and unique musical performance using the shells of clearly exotic molluscs, I then made photographs of the particular coast of the sea that bathes Acitrezza, devoid of beaches, with the characteristic faraglioni (islands of the Cyclops), for which bathers to immerse themselves in its clear waters, must adapt to the presence of the rocks, or take advantage of the concrete "slides" created for launching or hauling boats, or taking advantage of the characteristic wooden scaffolding which, like stilt houses, overlook the rocks, allowing you to park comfortably a short distance from the sea water; however what prompted me to go to Acitrezza was the particular scenic representation held on the occasion of the Feast of San Giovanni on 24 June, a farcical representation that dates back to 1750, and seems to originate as a propitiatory rite for to fish for swordfishfish, such farce-representation takes the name of "U pisci a mari" (the fish in the sea), almost superfluous to underline how fishing for coastal towns such as Acitrezza (therefore also fishing for large Mediterranean fish, such as tuna and swordfish) has represented and represents an important source of livelihood, fishing that above all in the past (now it has become a rarity, something survives in the Strait of Messina) was carried out with the use of a long rod equipped with a harpoon with mobile and articulated fins (so as to prevent the rod from being unsarpooned by leveraging it), with typical boats of two types, the "luntru", equipped with a tree in the center of the boat, about three meters high, from whose top you can see the swordfish (which in the period between April and September it approaches the Calabrian and Sicilian coast of the Strait of Messina, it can be seen while it sails torpidly or even sleeps on the surface), the other type of boat is the "feluca" whose "modern" version includes, in addition to a very high lookout mast, the presence of a very long walkway that allows you to reach the swordfish above, which has not yet alarmed itself by hearing the engine of the boat still far away. In this "pantomime", a Swordfish-Man is symbolically captured with a spear, bright red fake "stage blood" is immediately sprinkled on his body, the joy among the fishermen is great, at the tip of the pier with the umbrella in hand there is the "Rais" (the Chief of the crew who has the task of signaling the presence of the Man-Fish) who rejoices, (this type of fishing has very ancient origins), the musical band has taken its place on a barge, with its music, brightens up the whole scene despite the bloody aspect that characterizes the scene, some photographs if not commented (and seen individually) could create a bit of bewilderment, looking at the smiling faces of the spectators one realizes that we are faced with a farce-representation, the Man-Fish, albeit "wounded", manages to squirm and regain his freedom by throwing himself into the water, the fishermen are in the throes of anger and despair, the Rais despairs, the capture and salvation for the Man-Fish takes place three times, after which the fishermen, now without prey and desperate, end their comedy by overturning the boat and thus ending up miserably in the water. The colors present in the feast of San Giovanni di Acitrezza are the colors red and yellow, colors that we find in the clothes of the fishermen, in the decorations and in the colors of the boat called San Giovanni, so even the devotees dress in red and yellow wearing the handkerchief or the yellow-red dress of St. John.

 

………………………………………………………………………

 

Acitrezza, paese costiero della Sicilia orientale, frazione di Acicastello (paese così chiamato per la presenza di un tetro e imponente Castello Normanno che si erge sul mare); Acitrezza ha il prefisso “Aci”, che ritroviamo in nove comuni della provincia di Catania, prefisso che origina da un’antica leggenda che parla di una storia d’amore tra il pastorello Aci e la bellissima Nereide di nome Galatea, una una divinità marina, ma è anche una storia di gelosia, infatti Galatea era desiderata dal terribile dio Polifemo (Ovidio, nel XIII libro delle Metamorfosi); Acitrezza è soprattutto conosciuta ai più, per aver fatto da sfondo socio-culturale al romanzo “I Malavoglia” del grande scrittore verista Giovanni Verga, e al film “la terra trema” del grande regista Luchino Visconti, film ispirato sempre al romanzo “I Malavoglia”; a proposito di Giovanni Verga, nato a Catania, desidero sottolineare, che egli non fu solamente un famoso scrittore, esponente della corrente letteraria del Verismo, ma egli fu anche un appassionato fotografo, la cui produzione fotografica fu certamente influenzata dal suo amico e scrittore Luigi Capuana: nelle fotografia del Verga (da molti anni sono in possesso del libro ”Verga fotografo”) ritroviamo una particolare attenzione al ritratto (persone semplici, come parenti, conoscenti, contadini, cameriere), fotografie di realtà urbane e rurali della Sicilia del suo tempo (una diatriba riguarda se tali fotografie erano o meno importanti spunti per alimentare la sua produzione narrativa letteraria), ma non solo la Sicilia, ci sono fotografie di paesaggi come i laghi lombardi, di Bormio, della Svizzera, che Verga visitò partendo da Milano dove egli visse per molto tempo. Questa nota introduttiva, per parlare delle fotografie che ho realizzato ad Acitrezza il 24 giugno di quest’anno: le prime foto che posto (nello slideshow, come nel photostream, saranno le ultime ad apparire) ci sono i ritratti di alcuni simpaticissimi soci della Lega Navale di Acitrezza che si sono esibiti in una particolarissima ed unica performance musicale utilizzando le conchiglie di molluschi chiaramente esotici, ho poi realizzato fotografie della particolare costa del mare che bagna Acitrezza, priva di spiagge, coi caratteristici faraglioni (isole dei Ciclopi), per cui i bagnanti per immergersi nelle sue limpide acque, devono adattarsi alla presenza degli scogli, oppure approfittare di “scivole” in cemento create per la messa in acqua o l’alaggio delle barche, oppure usufruendo di caratteristiche impalcature in legno che, come palafitte, sovrastano le rocce, consentendo di stazionare comodamente a poca distanza dall’acqua del mare; però quello che mi ha spinto a recarmi ad Acitrezza è stata la particolare rappresentazione scenica che si tiene in occasione della Festa di San Giovanni il 24 giugno, rappresentazione farsesca che risale al 1750, e sembra originare come rito propiziatorio per la pesce al pescespada, tale rappresentazione-farsa prende il nome di “U pisci a mari” (il pesce nel mare), quasi superfluo sottolineare di come la pesca per paesi costieri come Acitrezza (quindi anche la pesca ai grandi pesci del Mediterraneo, come tonni e pescespada) ha rappresentato e rappresenta una importante fonte di sostentamento, pesca che soprattutto in passato (ora è diventata una rarità, qualcosa sopravvive nello stretto di Messina) veniva eseguita con l’utilizzo di una lunga asta dotata di un arpione ad alette mobili e snodabile (in modo da impedire che l’asta, facendo leva, potesse disarpionarsi), con barche tipiche di due tipi, il “luntru” , dotata di un albero nel centro della barca, alto circa tre metri, dalla cui sommità si avvista il pescespada (che nel periodo tra aprile e settembre si avvicina alla costa calabrese e siciliana dello stretto di Messina, lo si può avvistare mentre naviga torpidamente od addirittura riposa in superficie), l’altro tipo di barca è la “feluca” la cui versione “moderna” prevede oltre ad un’altissimo albero di avvistamento, la presenza di una lunghissima passerella che consente di giungere sopra il pescespada, il quale ancora non si è messo in allarme sentendo il motore della barca ancora distante. In questa “pantomima”, un Uomo-Pescespada viene catturato simbolicamente con una fiocina, del finto “sangue di scena” color rosso vivo viene subito cosparso sul suo corpo, la gioia tra i pescatori è grande, sulla punta del molo con l’ombrello in mano c’è il “Rais” (il Capo dell’equipaggio che ha il compito di segnalare la presenza dell’Uomo-Pesce) che esulta, (questo tipo di pesca ha origini antichissime), la banda musicale ha preso posto su di un barcone, con la sua musica rallegra tutta la scena nonostante l’aspetto comunque cruento che caratterizza la scena, qualche fotografia se non commentata (e vista singolarmente) potrebbe creare un po’ di sconcerto, guardando i visi sorridenti degli spettatori ci si rende conto che ci si trova davanti ad una rappresentazione-farsa, l’Uomo-Pesce seppur “ferito” riesce a dimenarsi ed a riguadagnare la libertà gettandosi in acqua, i pescatori sono in preda alla rabbia ed allo sconforto, il Rais si dispera, la cattura e la salvezza per l’Uomo-Pesce avviene tre volte, dopodiché i pescatori, oramai senza più preda e disperati terminano la loro commedia rovesciando la barca e finendo quindi miseramente in acqua. I colori presenti nella festa di San Giovanni di Acitrezza sono i colori rosso e giallo, colori che ritroviamo nei vestiti dei pescatori, negli addobbi e nei colori della barca detta di San Giovanni, così anche i devoti vestono di rosso e giallo indossando il fazzoletto od il vestito giallo-rosso di San Giovanni.

 

........................................................................

 

Our West Palm Beach station, a 60,000 sq. ft. transportation hub, provides new access to museums, golf courses, wildlife sanctuaries, beaches, and entertainment. It’s just stepping away from the Government Center, Restoration Hardware Rooftop & Restaurant, Clematis District, The Square, Centennial Park, and more.

 

KEY FACTS

 

The station is located at 501 Evernia Street.

 

The Brightline station in West Palm Beach opened in 2018, with revenue service starting on January 13, 2018, marking the beginning of Brightline's initial operations between West Palm Beach and Fort Lauderdale.

 

Initial Service: Connected West Palm Beach and Fort Lauderdale, with service to Miami starting later that year.

 

Convenient connections to Palm Tran Bus, Palm Trolley, and Tri-Rail.

 

Whether you’re biking or catching a ride with Brightline+, our station is within range of Northwood Village, Worth Avenue and The Palm Beaches.

 

Where can Brightline take you to West Palm Beach?

 

West Palm Beach or Palm Beach? Both are easily accessible from our West Palm Beach station. Upon arrival, you’ll be within easy walking distance of all the shopping and culinary delights at The Square (we highly recommend a tres leches donut from The Salty), the luxurious indulgences at RH Rooftop Restaurant, and live performances at Meyer Amphitheater.

 

Brightline+ can take you even farther. Starting December 1st, you can catch a shared or private ride to take you anywhere within a 5-mile radius, including Palm Beach itself. Go wild at Palm Beach Zoo (4.1 mi. away), or have a leisurely lunch at The Breakers (2 mi. away), one of the country’s most iconic resorts. Of course, no train trip to Palm Beach would be complete without a visit to the Henry Morrison Flagler Museum (1.7 mi. away) to learn more about the railroad pioneer who helped make your very trip today (and Palm Beach, itself) possible.

 

Credit for the data above is given to the following websites.

www.gobrightline.com/west-palm-beach

www.google.com/search?q=what+year+did+the+brightline+stat...

 

© All Rights Reserved - you may not use this image in any form without my prior permission.

  

Hollow Coves - Fact or Fiction (Official Audio)

www.youtube.com/watch?v=X8dBmGnXbjY

 

Location :Barcelona

 

Nikon 85 mm f/2.8 PC Micro-Nikkor

www.naturfotograf.com/85ts_review.html

I believe this fact, but then I had to google the meaning in the nursery rhyme where the wolf talks about his hairy chin...

 

ell.stackexchange.com/questions/351117/get-the-meaning-in...

 

When I was a kid my mother gave me a book of true facts for Christmas and I was instantly fixated on random, useless trivia and true facts. I used to read the Trivial Pursuit cards on road trips (nerd alert), and to this day I still have a passion for the unusual and bizarre factoids.

 

Theme: Random Facts

Year Seventeen Of My 365 Project

fact of the matter is

This saguaro flower (Arizona's state flower, by the way) will be open for less than 24 hours. The bee seen here is helping with the pollination process (birds might, also), which will hopefully lead to a bright red fruit. The fruit, once ripened, may become food and moisture for one or more of any number of animals and birds, and will contain up to 2000 seeds. Maybe in a hundred years or so one of those seeds might grow into a new saguaro like this one.

 

Seen in Sabino Canyon Recreation Area, Tucson.

 

www.desertmuseum.org/kids/oz/long-fact-sheets/Flowers%20a...

C-FACT - deHavilland Canada DHC-8-311 Dash 8 - Air Canada Express (operated by JAZZ Aviation)

at Montreal Trudeau International Airport (YUL)

 

c/n 262 - built in 1991 for Air BC -

merged into JAZZ 2002 -

last service 15,07.2021 Windsor, ON - Toronto-Pearson, ON - flew Toronto-Pearson, ON - North Bay, 16.07.2021 for storage.

I promise this does count as a train photo, and there really is one in here...in fact if you look close you can see the entire train from lead ACS64 to trailing Amfleet.

 

Amtrak Region train 173 for Washington is crossing the 1394 ft long double track bridge over the Thames River from Groton to New London at about MP 124.3 on the New Haven Line main. The four Parker thru truss approach spans date from the New Haven's 1919 construction of a new bridge across the river. They are cruising right across the middle of the new 105 ft wide vertical lift span built in 2008 to replace the 1919 era Strauss heel-trunnion Warren through-truss bascule draw span.

 

It's that lift span that has made this interesting image possible. Dominating the foreground with her gilt figurehead twinkling on her prow is the Barque Eagle, the 295 ft. long flagship of the United States Coast Guard which along with the USS Constitution, is one of only two commissioned sailing vessels in the United States military today.

 

New London is the home of the US Coast Guard Academy and every cadet who attends the Academy as well candidates from the Officer Candidate School will spend a minimum of six weeks on board Eagle whose primary mission is training. Historically she berthed up River directly in front of the Academy but she now ties up here beside Fort Trumbull State Park while in home port. I suppose this is suitable as this 19th century fortification out of sight behind me served in later life as rhe original site of the US Coast Guard Academy from its founding in 1915 until moving to its current campus in 1932.

 

But, that history is not why she berths here, rather we have Amtrak to thank for that. Though the new lift bridge was specifically designed to clear the Eagle's masts, they came up short and for her to clear seamen have to climb the masts and remove some some components from the top as the young seaman I spoke with explained. For that reason she rarely travels up past the bridges anymore and now calls this dock home, though I understand she will be moving to city pier downtown directly behind the Amtrak station in the coming years.

 

As for that Eagle on her prow? Well you might not know but that is actually a Nazi eagle and the medallion in her talons now bearing the Coast Guard crest was originally adorned with a swastika! You see the Eagle is actually a spoil of war having been built at at the Blohm & Voss shipyard in Hamburg, Germany in 1936 as as the flagship of the Kriegsmarine sail training fleet. Originally named Horst Wessell, Rudolf Hess gave the speech at her launch in the presence of Adolf Hitler! At the end of WWII the US acquired her when the allies were apportioning the war materials of the Reich and sailed her across the Atlantic with her German crew now under US command.

 

I HIGHLY recommend this fascinating read if you are interested in learning more and some great stories: www.google.com/amp/s/www.bbc.com/news/magazine-33543706.amp

 

And the USCG's official site is great especially if you'd like to see her with her three masts at full sail as they publish her schedule here: www.uscga.edu/eagle-schedule/

  

And above the rail bridge is the massive Goldstar Memorial Bridge carrying 11 lanes of Interstate 95 134 ft over the river on twin 6000 ft spans (blt. 1943 and 1973) that make up the largest bridge in the state.

 

New London, Connecticut

Friday March 4, 2022

Psychological Fact :

 

When a person cries and the first drop of tears comes from the right eye, it's from happiness. But when the first roll is from the left, it is pain.

 

If you cry from both eyes at the same time, you probably stepped on a LEGO

.

.

I did not come up with the text on this one, but I did choose the minifigure imagery, photograph and edit the final images.

 

text credit goes to the frogman

  

"The First G-APD Cherenkov Telescope (FACT) is the first imaging atmospheric Cherenkov telescope using Geiger-mode avalanche photodiods (G-APDs) as photo sensors. The rather small, low-cost telescope will not only serve as a test bench for this technology in Cherenkov astronomy, but also monitor bright active galactic nuclei (AGN) in the TeV energy range." Image taken at Observatorio del Roque de Los Muchachos, Canary Islands, Spain. One of the MAGIC (Major Atmospheric Gamma-ray Imaging Cherenkov Telescopes) is visible in the background. The Canary Islands are volcanic in origin and the whole observatory lies on the edge of the Taburiente volcano.

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based on historical facts. BEWARE!

  

Some background:

The OV-10 Bronco was initially conceived in the early 1960s through an informal collaboration between W. H. Beckett and Colonel K. P. Rice, U.S. Marine Corps, who met at Naval Air Weapons Station China Lake, California, and who also happened to live near each other. The original concept was for a rugged, simple, close air support aircraft integrated with forward ground operations. At the time, the U.S. Army was still experimenting with armed helicopters, and the U.S. Air Force was not interested in close air support.

The concept aircraft was to operate from expedient forward air bases using roads as runways. Speed was to be from very slow to medium subsonic, with much longer loiter times than a pure jet. Efficient turboprop engines would give better performance than piston engines. Weapons were to be mounted on the centerline to get efficient aiming. The inventors favored strafing weapons such as self-loading recoilless rifles, which could deliver aimed explosive shells with less recoil than cannons, and a lower per-round weight than rockets. The airframe was to be designed to avoid the back blast.

 

Beckett and Rice developed a basic platform meeting these requirements, then attempted to build a fiberglass prototype in a garage. The effort produced enthusiastic supporters and an informal pamphlet describing the concept. W. H. Beckett, who had retired from the Marine Corps, went to work at North American Aviation to sell the aircraft.

The aircraft's design supported effective operations from forward bases. The OV-10 had a central nacelle containing a crew of two in tandem and space for cargo, and twin booms containing twin turboprop engines. The visually distinctive feature of the aircraft is the combination of the twin booms, with the horizontal stabilizer that connected them at the fin tips. The OV-10 could perform short takeoffs and landings, including on aircraft carriers and large-deck amphibious assault ships without using catapults or arresting wires. Further, the OV-10 was designed to take off and land on unimproved sites. Repairs could be made with ordinary tools. No ground equipment was required to start the engines. And, if necessary, the engines would operate on high-octane automobile fuel with only a slight loss of power.

 

The aircraft had responsive handling and could fly for up to 5½ hours with external fuel tanks. The cockpit had extremely good visibility for both pilot and co-pilot, provided by a wrap-around "greenhouse" that was wider than the fuselage. North American Rockwell custom ejection seats were standard, with many successful ejections during service. With the second seat removed, the OV-10 could carry 3,200 pounds (1,500 kg) of cargo, five paratroopers, or two litter patients and an attendant. Empty weight was 6,969 pounds (3,161 kg). Normal operating fueled weight with two crew was 9,908 pounds (4,494 kg). Maximum takeoff weight was 14,446 pounds (6,553 kg).

The bottom of the fuselage bore sponsons or "stub wings" that improved flight performance by decreasing aerodynamic drag underneath the fuselage. Normally, four 7.62 mm (.308 in) M60C machine guns were carried on the sponsons, accessed through large forward-opening hatches. The sponsons also had four racks to carry bombs, pods, or fuel. The wings outboard of the engines contained two additional hardpoints, one per side. Racked armament in the Vietnam War was usually seven-shot 2.75 in (70 mm) rocket pods with white phosphorus marker rounds or high-explosive rockets, or 5" (127 mm) four-shot Zuni rocket pods. Bombs, ADSIDS air-delivered/para-dropped unattended seismic sensors, Mk-6 battlefield illumination flares, and other stores were also carried.

Operational experience showed some weaknesses in the OV-10's design. It was significantly underpowered, which contributed to crashes in Vietnam in sloping terrain because the pilots could not climb fast enough. While specifications stated that the aircraft could reach 26,000 feet (7,900 m), in Vietnam the aircraft could reach only 18,000 feet (5,500 m). Also, no OV-10 pilot survived ditching the aircraft.

 

The OV-10 served in the U.S. Air Force, U.S. Marine Corps, and U.S. Navy, as well as in the service of a number of other countries. In U.S. military service, the Bronco was operated until the early Nineties, and obsoleted USAF OV-10s were passed on to the Bureau of Alcohol, Tobacco, and Firearms for anti-drug operations. A number of OV-10As furthermore ended up in the hands of the California Department of Forestry (CDF) and were used for spotting fires and directing fire bombers onto hot spots.

 

This was not the end of the OV-10 in American military service, though: In 2012, the type gained new attention because of its unique qualities. A $20 million budget was allocated to activate an experimental USAF unit of two airworthy OV-10Gs, acquired from NASA and the State Department. These machines were retrofitted with military equipment and were, starting in May 2015, deployed overseas to support Operation “Inherent Resolve”, flying more than 120 combat sorties over 82 days over Iraq and Syria. Their concrete missions remained unclear, and it is speculated they provided close air support for Special Forces missions, esp. in confined urban environments where the Broncos’ loitering time and high agility at low speed and altitude made them highly effective and less vulnerable than helicopters.

Furthermore, these Broncos reputedly performed strikes with the experimental AGR-20A “Advanced Precision Kill Weapons System (APKWS)”, a Hydra 70-millimeter rocket with a laser-seeking head as guidance - developed for precision strikes against small urban targets with little collateral damage. The experiment ended satisfactorily, but the machines were retired again, and the small unit was dissolved.

 

However, the machines had shown their worth in asymmetric warfare, and the U.S. Air Force decided to invest in reactivating the OV-10 on a regular basis, despite the overhead cost of operating an additional aircraft type in relatively small numbers – but development and production of a similar new type would have caused much higher costs, with an uncertain time until an operational aircraft would be ready for service. Re-activating a proven design and updating an existing airframe appeared more efficient.

The result became the MV-10H, suitably christened “Super Bronco” but also known as “Black Pony”, after the program's internal name. This aircraft was derived from the official OV-10X proposal by Boeing from 2009 for the USAF's Light Attack/Armed Reconnaissance requirement. Initially, Boeing proposed to re-start OV-10 manufacture, but this was deemed uneconomical, due to the expected small production number of new serial aircraft, so the “Black Pony” program became a modernization project. In consequence, all airframes for the "new" MV-10Hs were recovered OV-10s of various types from the "boneyard" at Davis-Monthan Air Force Base in Arizona.

 

While the revamped aircraft would maintain much of its 1960s-vintage rugged external design, modernizations included a completely new, armored central fuselage with a highly modified cockpit section, ejection seats and a computerized glass cockpit. The “Black Pony” OV-10 had full dual controls, so that either crewmen could steer the aircraft while the other operated sensors and/or weapons. This feature would also improve survivability in case of incapacitation of a crew member as the result from a hit.

The cockpit armor protected the crew and many vital systems from 23mm shells and shrapnel (e. g. from MANPADS). The crew still sat in tandem under a common, generously glazed canopy with flat, bulletproof panels for reduced sun reflections, with the pilot in the front seat and an observer/WSO behind. The Bronco’s original cargo capacity and the rear door were retained, even though the extra armor and defensive measures like chaff/flare dispensers as well as an additional fuel cell in the central fuselage limited the capacity. However, it was still possible to carry and deploy personnel, e. g. small special ops teams of up to four when the aircraft flew in clean configuration.

Additional updates for the MV-10H included structural reinforcements for a higher AUW and higher g load maneuvers, similar to OV-10D+ standards. The landing gear was also reinforced, and the aircraft kept its ability to operate from short, improvised airstrips. A fixed refueling probe was added to improve range and loiter time.

 

Intelligence sensors and smart weapon capabilities included a FLIR sensor and a laser range finder/target designator, both mounted in a small turret on the aircraft’s nose. The MV-10H was also outfitted with a data link and the ability to carry an integrated targeting pod such as the Northrop Grumman LITENING or the Lockheed Martin Sniper Advanced Targeting Pod (ATP). Also included was the Remotely Operated Video Enhanced Receiver (ROVER) to provide live sensor data and video recordings to personnel on the ground.

 

To improve overall performance and to better cope with the higher empty weight of the modified aircraft as well as with operations under hot-and-high conditions, the engines were beefed up. The new General Electric CT7-9D turboprop engines improved the Bronco's performance considerably: top speed increased by 100 mph (160 km/h), the climb rate was tripled (a weak point of early OV-10s despite the type’s good STOL capability) and both take-off as well as landing run were almost halved. The new engines called for longer nacelles, and their circular diameter markedly differed from the former Garrett T76-G-420/421 turboprop engines. To better exploit the additional power and reduce the aircraft’s audio signature, reversible contraprops, each with eight fiberglass blades, were fitted. These allowed a reduced number of revolutions per minute, resulting in less noise from the blades and their tips, while the engine responsiveness was greatly improved. The CT7-9Ds’ exhausts were fitted with muzzlers/air mixers to further reduce the aircraft's noise and heat signature.

Another novel and striking feature was the addition of so-called “tip sails” to the wings: each wingtip was elongated with a small, cigar-shaped fairing, each carrying three staggered, small “feather blade” winglets. Reputedly, this installation contributed ~10% to the higher climb rate and improved lift/drag ratio by ~6%, improving range and loiter time, too.

Drawing from the Iraq experience as well as from the USMC’s NOGS test program with a converted OV-10D as a night/all-weather gunship/reconnaissance platform, the MV-10H received a heavier gun armament: the original four light machine guns that were only good for strafing unarmored targets were deleted and their space in the sponsons replaced by avionics. Instead, the aircraft was outfitted with a lightweight M197 three-barrel 20mm gatling gun in a chin turret. This could be fixed in a forward position at high speed or when carrying forward-firing ordnance under the stub wings, or it could be deployed to cover a wide field of fire under the aircraft when it was flying slower, being either slaved to the FLIR or to a helmet sighting auto targeting system.

The original seven hardpoints were retained (1x ventral, 2x under each sponson, and another pair under the outer wings), but the total ordnance load was slightly increased and an additional pair of launch rails for AIM-9 Sidewinders or other light AAMs under the wing tips were added – not only as a defensive measure, but also with an anti-helicopter role in mind; four more Sidewinders could be carried on twin launchers under the outer wings against aerial targets. Other guided weapons cleared for the MV-10H were the light laser-guided AGR-20A and AGM-119 Hellfire missiles, the Advanced Precision Kill Weapon System upgrade to the light Hydra 70 rockets, the new Laser Guided Zuni Rocket which had been cleared for service in 2010, TV-/IR-/laser-guided AGM-65 Maverick AGMs and AGM-122 Sidearm anti-radar missiles, plus a wide range of gun and missile pods, iron and cluster bombs, as well as ECM and flare/chaff pods, which were not only carried defensively, but also in order to disrupt enemy ground communication.

 

In this configuration, a contract for the conversion of twelve mothballed American Broncos to the new MV-10H standard was signed with Boeing in 2016, and the first MV-10H was handed over to the USAF in early 2018, with further deliveries lasting into early 2020. All machines were allocated to the newly founded 919th Special Operations Support Squadron at Duke Field (Florida). This unit was part of the 919th Special Operations Wing, an Air Reserve Component (ARC) of the United States Air Force. It was assigned to the Tenth Air Force of Air Force Reserve Command and an associate unit of the 1st Special Operations Wing, Air Force Special Operations Command (AFSOC). If mobilized the wing was gained by AFSOC (Air Force Special Operations Command) to support Special Tactics, the U.S. Air Force's special operations ground force. Similar in ability and employment to Marine Special Operations Command (MARSOC), U.S. Army Special Forces and U.S. Navy SEALs, Air Force Special Tactics personnel were typically the first to enter combat and often found themselves deep behind enemy lines in demanding, austere conditions, usually with little or no support.

 

The MV-10Hs are expected to provide support for these ground units in the form of all-weather reconnaissance and observation, close air support and also forward air control duties for supporting ground units. Precision ground strikes and protection from enemy helicopters and low-flying aircraft were other, secondary missions for the modernized Broncos, which are expected to serve well into the 2040s. Exports or conversions of foreign OV-10s to the Black Pony standard are not planned, though.

  

General characteristics:

Crew: 2

Length: 42 ft 2½ in (12,88 m) incl. pitot

Wingspan: 45 ft 10½ in(14 m) incl. tip sails

Height: 15 ft 2 in (4.62 m)

Wing area: 290.95 sq ft (27.03 m²)

Airfoil: NACA 64A315

Empty weight: 9,090 lb (4,127 kg)

Gross weight: 13,068 lb (5,931 kg)

Max. takeoff weight: 17,318 lb (7,862 kg)

 

Powerplant:

2× General Electric CT7-9D turboprop engines, 1,305 kW (1,750 hp) each,

driving 8-bladed Hamilton Standard 8 ft 6 in (2.59 m) diameter constant-speed,

fully feathering, reversible contra-rotating propellers with metal hub and composite blades

 

Performance:

Maximum speed: 390 mph (340 kn, 625 km/h)

Combat range: 198 nmi (228 mi, 367 km)

Ferry range: 1,200 nmi (1,400 mi, 2,200 km) with auxiliary fuel

Maximum loiter time: 5.5 h with auxiliary fuel

Service ceiling: 32.750 ft (10,000 m)

13,500 ft (4.210 m) on one engine

Rate of climb: 17.400 ft/min (48 m/s) at sea level

Take-off run: 480 ft (150 m)

740 ft (227 m) to 50 ft (15 m)

1,870 ft (570 m) to 50 ft (15 m) at MTOW

Landing run: 490 ft (150 m)

785 ft (240 m) at MTOW

1,015 ft (310 m) from 50 ft (15 m)

 

Armament:

1x M197 3-barreled 20 mm Gatling cannon in a chin turret with 750 rounds ammo capacity

7x hardpoints for a total load of 5.000 lb (2,270 kg)

2x wingtip launch rails for AIM-9 Sidewinder AAMs

  

The kit and its assembly:

This fictional Bronco update/conversion was simply spawned by the idea: could it be possible to replace the original cockpit section with one from an AH-1 Cobra, for a kind of gunship version?

 

The basis is the Academy OV-10D kit, mated with the cockpit section from a Fujimi AH-1S TOW Cobra (Revell re-boxing, though), chosen because of its “boxy” cockpit section with flat glass panels – I think that it conveys the idea of an armored cockpit section best. Combining these parts was not easy, though, even though the plan sound simple. Initially, the Bronco’s twin booms, wings and stabilizer were built separately, because this made PSR on these sections easier than trying the same on a completed airframe. One of the initial challenges: the different engines. I wanted something uprated, and a different look, and I had a pair of (excellent!) 1:144 resin engines from the Russian company Kompakt Zip for a Tu-95 bomber at hand, which come together with movable(!) eight-blade contraprops that were an almost perfect size match for the original three-blade props. Biggest problem: the Tu-95 nacelles have a perfectly circular diameter, while the OV-10’s booms are square and rectangular. Combining these parts and shapes was already a messy PST affair, but it worked out quite well – even though the result rather reminds of some Chinese upgrade measure (anyone know the Tu-4 copies with turboprops? This here looks similar!). But while not pretty, I think that the beafier look works well and adds to the idea of a “revived” aircraft. And you can hardly beat the menacing look of contraprops on anything...

The exotic, so-called “tip sails” on the wings, mounted on short booms, are a detail borrowed from the Shijiazhuang Y-5B-100, an updated Chinese variant/copy of the Antonov An-2 biplane transporter. The booms are simple pieces of sprue from the Bronco kit, the winglets were cut from 0.5mm styrene sheet.

 

For the cockpit donor, the AH-1’s front section was roughly built, including the engine section (which is a separate module, so that the basic kit can be sold with different engine sections), and then the helicopter hull was cut and trimmed down to match the original Bronco pod and to fit under the wing. This became more complicated than expected, because a) the AH-1 cockpit and the nose are considerably shorter than the OV-10s, b) the AH-1 fuselage is markedly taller than the Bronco’s and c) the engine section, which would end up in the area of the wing, features major recesses, making the surface very uneven – calling for massive PSR to even this out. PSR was also necessary to hide the openings for the Fujimi AH-1’s stub wings. Other issues: the front landing gear (and its well) had to be added, as well as the OV-10 wing stubs. Furthermore, the new cockpit pod’s rear section needed an aerodynamical end/fairing, but I found a leftover Academy OV-10 section from a build/kitbashing many moons ago. Perfect match!

All these challenges could be tackled, even though the AH-1 cockpit looks surprisingly stout and massive on the Bronco’s airframe - the result looks stockier than expected, but it works well for the "Gunship" theme. Lots of PSR went into the new central fuselage section, though, even before it was mated with the OV-10 wing and the rest of the model.

Once cockpit and wing were finally mated, the seams had to disappear under even more PSR and a spinal extension of the canopy had to be sculpted across the upper wing surface, which would meld with the pod’s tail in a (more or less) harmonious shape. Not an easy task, and the fairing was eventually sculpted with 2C putty, plus even more PSR… Looks quite homogenous, though.

 

After this massive body work, other hardware challenges appeared like small distractions. The landing gear was another major issue because the deeper AH-1 section lowered the ground clearance, also because of the chin turret. To counter this, I raised the OV-10’s main landing gear by ~2mm – not much, but it was enough to create a credible stance, together with the front landing gear transplant under the cockpit, which received an internal console to match the main landing gear’s length. Due to the chin turret and the shorter nose, the front wheel retracts backwards now. But this looks quite plausible, thanks to the additional space under the cockpit tub, which also made a belt feed for the gun’s ammunition supply believable.

To enhance the menacing look I gave the model a fixed refueling boom, made from 1mm steel wire and a receptor adapter sculpted with white glue. The latter stuff was also used add some antenna fairings around the hull. Some antennae, chaff dispensers and an IR decoy were taken from the Academy kit.

 

The ordnance came from various sources. The Sidewinders under the wing tips were taken from an Italeri F-16C/D kit, they look better than the missiles from the Academy Bronco kit. Their launch rails came from an Italeri Bae Hawk 200. The quadruple Hellfire launchers on the underwing hardpoints were left over from an Italeri AH-1W, and they are a perfect load for this aircraft and its role. The LAU-10 and -19 missile pods on the stub wings were taken from the OV-10 kit.

  

Painting and markings:

Finding a suitable and somewhat interesting – but still plausible – paint scheme was not easy. Taking the A-10 as benchmark, an overall light grey livery (with focus on low contrast against the sky as protection against ground fire) would have been a likely choice – and in fact the last operational American OV-10s were painted in this fashion. But in order to provide a different look I used the contemporary USAF V-22Bs and Special Operations MC-130s as benchmark, which typically carry a darker paint scheme consisting of FS 36118 (suitably “Gunship Gray” :D) from above, FS 36375 underneath, with a low, wavy waterline, plus low-viz markings. Not spectacular, but plausible – and very similar to the late r/w Colombian OV-10s.

The cockpit tub became Dark Gull Grey (FS 36231, Humbrol 140) and the landing gear white (Revell 301).

 

The model received an overall black ink washing and some post-panel-shading, to liven up the dull all-grey livery. The decals were gathered from various sources, and I settled for black USAF low-viz markings. The “stars and bars” come from a late USAF F-4, the “IP” tail code was tailored from F-16 markings and the shark mouth was taken from an Academy AH-64. Most stencils came from another Academy OV-10 sheet and some other sources.

Decals were also used to create the trim on the propeller blades and markings on the ordnance.

 

Finally, the model was sealed with a coat of matt acrylic varnish (Italeri) and some exhaust soot stains were added with graphite along the tail boom flanks.

  

A successful transplantation – but is this still a modified Bronco or already a kitbashing? The result looks quite plausible and menacing, even though the TOW Cobra front section appears relatively massive. But thanks to the bigger engines and extended wing tips the proportions still work. The large low-pressure tires look a bit goofy under the aircraft, but they are original. The grey livery works IMHO well, too – a more colorful or garish scheme would certainly have distracted from the modified technical basis.

🔍 Plaghunter protects this beautiful picture against image theft. Get your own account for free! 👊

Downtown Los Angeles from the Hollywood Hills

+++ DISCLAIMER +++

Nothing you see here is real, even though the conversion or the presented background story might be based historical facts. BEWARE!

  

Some background:

The Douglas F3D Skyknight (later designated F-10 Skyknight) was a United States twin-engined, mid-wing jet fighter aircraft manufactured by the Douglas Aircraft Company in El Segundo, California. The F3D was designed as a carrier-based all-weather night fighter and saw service with the United States Navy and United States Marine Corps. The mission of the F3D-2 was to search out and destroy enemy aircraft at night.

 

The F3D was not intended to be a typical sleek and nimble dogfighter, but as a standoff night fighter, packing a powerful radar system and a second crew member. It originated in 1945 with a US Navy requirement for a jet-powered, radar-equipped, carrier-based night fighter. The Douglas team led by Ed Heinemann designed around the bulky air intercept radar systems of the time, with side-by-side seating for the pilot and radar operator. The result was an aircraft with a wide, deep, and roomy fuselage. Instead of ejection seats, an escape tunnel was used.

 

As a night fighter that was not expected to be as fast as smaller daylight fighters, the expectation was to have a stable platform for its radar system and the four 20 mm cannon mounted in the lower fuselage. The F3D was, however, able to outturn a MiG-15 in an inside circle. The fire control system in the F3D-1 was the Westinghouse AN/APQ-35.

The AN/APQ-35 was advanced for the time, a combination of three different radars, each performing separate functions: an AN/APS-21 search radar, an AN/APG-26 tracking radar, both located in the nose, and an AN/APS-28 tail warning radar. The complexity of this vacuum tube-based radar system, which was produced before the advent of semiconductor electronics, required intensive maintenance to keep it operating properly.

 

The F3D Skyknight was never produced in great numbers but it did achieve many firsts in its role as a night fighter over Korea. While it never achieved the fame of the North American F-86 Sabre, it did down several Soviet-built MiG-15s as a night fighter over Korea with only one air-to-air loss of its own against a Chinese MiG-15 on the night of 29 May 1953.

 

In the years after the Korean War, the F3D was gradually replaced by more powerful aircraft with better radar systems. The F3D's career was not over though; its stability and spacious fuselage made it easily adaptable to other roles. The Skyknight played an important role in the development of the radar-guided AIM-7 Sparrow missile in the 1950s which led to further guided air-to-air missile developments.

In 1954, the F3D-2M was the first U.S. Navy jet aircraft to be fitted with an operational air-to-air missile: the Sparrow I,an all weather day/night BVR missile that used beam riding guidance for the aircrew to control the flight of the missile. Only 38 aircraft (12 F3D-1Ms, and 16 F3D-2Ms) were modified to use the missiles, though.

 

One of the F3D's main flaws, which it shared with many early jet aircraft, was its lack of power and performance. Douglas tried to mend this through a radical redesign: The resulting F3D-3 was the designation assigned to a swept-winged version (36° sweep at quarter chord) of the Skyknight. It was originally to be powered by the J46 turbojet, rated at 4.080 lbf for takeoff, which was under development but suffered serious trouble.

 

This led to the cancellation of the J46, and calculated performance of the F3D-3 with the substitute J34 was deemed insufficient. As an alternative the aircraft had to be modified to carry two larger and longer J47-GE-2 engines, which also powered the USN's FJ-2 "Fury" fighter.

This engine's thrust of 6.000 pounds-force (27 kN) at 7,950 rpm appeared sufficient for the heavy, swept-wing aircraft, and in 1954 an order for 287 production F3D-3s was issued, right time to upgrade the new type with the Sparrow I.

 

While the F3D-3's outline resembled that of its straight wing predecessors, a lot of structural changes had to be made to accommodate the shifted main wing spar, and the heavy radar equipment also took its toll: the gross weight climbed by more than 3 tons, and as a result much of the gained performance through the stronger engines and the swept wings was eaten away.

 

Maximum internal fuel load was 1.350 US gallons, plus a further 300 in underwing drop tanks. Overall wing surface remained the same, but the swept wing surfaces reduced the wing span.

In the end, thrust-to-weight ratio was only marginally improved and in fact, the F3D-3 had a lower rate of climb than the F3D-2, its top speed at height was only marginally higher, and stall speed climbed by more than 30 mph, making carrier landings more complicated.

 

It's equipment was also the same - the AN/APQ-35 was still fitted, but mainly because the large radar dish offered the largest detection range of any carrier-borne type of that time, and better radars that could match this performance were still under construction. Anyway, the F3D-3 was able to carry Sparrow I from the start, and this would soon be upgraded to Sparrow III (which became the AIM-7), and it showed much better flight characteristics at medium altitude.

 

Despite the ,many shortcomings the "new" aircraft represented an overall improvement over the F3D-2 and was accepted for service. Production of the F3D-3 started in 1955, but technology advanced quickly and a serious competitor with supersonic capability appeared with the McDonnell F3H Demon and the F4D Skyray - much more potent aircraft that the USN immediately preferred to the slow F3Ds. As a consequence, the production contract was cut down to only 102 aircraft.

 

But it came even worse: production of the swept wing Skyknight already ceased after 18 months and 71 completed airframes. Ironically, the F3D-3's successor, the F3H and its J40 engine, turned out to be more capricious than expected, which delayed the Demon's service introduction and seriously hampered its performance, so that the F3D-3 kept its all weather/night fighter role until 1960, and was eventually taken out of service in 1964 when the first F-4 Phantom II fighters appeared in USN service.

 

In 1962 all F3D versions were re-designated into F-10, the swept wing F3D-3 became the F-10C. The straight wing versions were used as trainers and also served as an electronic warfare platform into the Vietnam War as a precursor to the EA-6A Intruder and EA-6B Prowler, while the swept-wing fighters were completely retired as their performance and mission equipment had been outdated. The last F-10C flew in 1965.

  

General characteristics

Crew: two

Length: 49 ft (14.96 m)

Wingspan: 42 feet 5 inches (12.95 m)

Height: 16 ft 1 in (4.90 m)

Wing area: 400 ft² (37.16 m²)

Empty weight: 19.800 lb (8.989 kg)

Loaded weight: 28,843 lb (13.095 kg)

Max. takeoff weight: 34.000 lb (15.436 kg)

 

Powerplant:

2× General Electric J47-GE-2 turbojets, each rated at 6.000 lbf (26,7 kN) each

 

Performance

Maximum speed: 630 mph (1.014 km/h) at sea level, 515 mph (829 km/h) t (6,095 m)

Cruise speed: 515 mph (829 km/h) at 40,000 feet

Stall speed: 128 mph (206 km/h)

Range: 890 mi (1.433 km) with internal fuel; 1,374 mi, 2,212 km with 2× 300 gal (1.136 l) tanks

Service ceiling: 43.000 ft (13.025 m)

Rate of climb: 2,640 ft/min (13,3 m/s)

Wing loading: 53.4 lb/ft² (383 kg/m²)

Thrust/weight: 0.353

 

Armament

4× 20 mm Hispano-Suiza M2 cannon, 200 rpg, in the lower nose

Four underwing hardpoints inboard of the wing folding points for up to 4.000 lb (1.816 kg)

ordnance, including AIM-7 Sparrow air-to-air missiles, 11.75 in (29.8cm) Tiny Tim rockets, two

150 or 300 US gal drop tanks or bombs of up to 2.000 lb (900 kg) caliber, plus four hardpoints

under each outer wing for a total of eight 5" HVARs or eight pods with six 2 3/4" FFARs each

  

The kit and its assembly:

Another project which had been on the list for some years now but finally entered the hardware stage. The F3D itself is already a more or less forgotten aircraft, and there are only a few kits available - there has been a vacu kit, the Matchbox offering and lately kits in 1:72 and 1:48 by Sword.

 

The swept wing F3D-3 remained on the drawing board, but would have been a very attractive evolution of the tubby Skyknight. In fact, the swept surfaces resemble those of the A3D/B-66 a Iot, and this was the spark that started the attempt to build this aircraft as a model through a kitbash.

 

This model is basically the Matchbox F3D coupled with wings from an Italeri B-66, even though, being much bigger, these had to be modified.

 

The whole new tail is based on B-66 material. The fin's chord was shortened, though, and a new leading edge (with its beautiful curvature) had to be sculpted from 2C putty. The vertical stabilizers also come from the B-66, its span was adjusted to the Skyknight's and a new root intersection was created from styrene and putty, so that a cross-shaped tail could be realized.

The tail radar dish was retained, even though sketches show the F3D-3 without it.

 

The wings were take 1:1 from the B-66 and match well. They just had to be shortened, I set the cut at maybe 5mm outwards of the engine pods' attachment points. They needed some re-engraving for the inner flaps, as these would touch the F3D-3's engines when lowered, but shape, depth and size are very good for the conversion.

 

On the fuselage, the wings' original "attachment bays" had to be filled, and the new wings needed a new position much further forward, directly behind the cockpit, in order to keep the CoG.

 

One big issue would be the main landing gear. On the straight wing aircraft it retracts outwards, and I kept this arrangement. No detail of the exact landing gear well position was available to me, so I used the Matchbox parts as stencils and placed the new wells as much aft as possible, cutting out new openings from the B-66 wings.

The OOB landing gear was retained, but I added some structure to the landing gear wells with plastic blister material - not to be realistic, just for the effect. A lot of lead was added in the kit's nose section, making sure it actually stands on the front wheel.

 

The Matchbox Skyknight basically offers no real problems, even though the air intake design leaves, by tendency some ugly seams and even gaps. I slightly pimped the cockpit with headrests, additional gauges and a gunsight, as well as two (half) pilot figures. I did not plan to present the opened cockpit and the bulbous windows do not allow a clear view onto the inside anyway, so this job was only basically done. In fact, the pilots don't have a lower body at all...

 

Ordnance comprises of four Sparrow III - the Sparrow I with its pointed nose could have been an option, too, but I think at the time of 1960 the early version was already phased out?

   

Painting and markings:

This was supposed to become a typical USN service aircraft of the 60ies, so a grey/white livery was predetermined. I had built an EF-10B many years ago from the Matchbox kit, and the grey/white guise suits the Whale well - and here it would look even better, with the new, elegant wings.

 

For easy painting I used semi matt white from the rattle can on the lower sides (painting the landing gear at the same time!), and then added FS 36440 (Light Gull Grey, Humbrol 129) with a brush to the upper sides. The radar nose became semi matt black (with some weathering), while the RHAWS dish was kept in tan (Humbrol 71).

 

In order to emphasize the landing gear and the respective wells I added a red rim to the covers.

The cockpit interior was painted in dark grey - another factor which made adding too many details there futile, too...

 

The aircraft's individual marking were to be authentic, and not flamboyant. In the mid 50ies the USN machines were not as colorful as in the Vietnam War era, that just started towards the 60ies.

 

The markings I used come primarily from an Emhar F3H Demon, which features no less than four(!) markings, all with different colors. I settled for a machine of VF-61 "Jolly Rogers", which operated from the USS Saratoga primarily in the Mediterranean from 1958 on - and shortly thereafter the unit was disbanded.

 

I took some of the Demon markings and modified them with very similar but somewhat more discrete markings from VMF-323, which flew FJ-4 at the time - both squadrons marked their aircraft with yellow diamonds on black background, and I had some leftover decals from a respective Xtradecal sheet in the stash.

  

IMHO a good result with the B-66 donation parts, even though I am not totally happy with the fin - it could have been more slender at the top, and with a longer, more elegant spine fillet, but for that the B-66 fin was just too thick. Anyway, I am not certain if anyone has ever built this aircraft? I would not call the F3D-3 elegant or beautiful, but the swept wings underline the fuselage's almost perfect teardrop shape, and the thing reminds a lot of the later Grumman A-6 Intruder?

What could be more scary than a real dragon?

 

The Komodo dragon (Varanus komodoensis) is the real dragon of the world.

It is the world's largest living reptile, with males averaging about nine feet in length and about three hundred pounds. Although its size, an interesting Komodo dragon fact is that it can run as fast as 13 mph (20 km/h), almost as fast as a dog. It can also swim between the islands it inhabits without any problems.

 

While they are not fire breathing, they have big sharp teeth, and they have been know to eat a few people who got in their way.

Mainly though, they eat deer, goat and wild boar.

 

Their home is Indonesia, specifically the island of Komodo and a few nearby islands.

 

It's also a scary time for Komodo dragons. They are endangered, and were first placed on the most endangered list of the Convention on the International Trade in Endangered Species (CITES) in 1976. The government of Indonesia set up the Komodo National Park on the island of Komodo. Still, that protection does not extend to the other islands where the Komodo dragon lives.

This was taken just south of Clearwater Beach but North of Sand Key. In fact, the jetty you can see in the distance is Sand Key State Park. It's all in Clearwater, Florida. This was taken after sunset, and was just over a 3 minute exposure.

Ежегодно 21 марта во всем мире отмечается Всемирный день людей с синдромом Дауна. В 2018 году празднование этого дня пройдет в 13-ый раз начиная с 2006 года. Каждый год празднование проходит под лозунгом, который отражает важные аспекты жизни людей с синдромом Дауна.

 

Лозунг 2018 года — WhatI Bring To My Community (Чем я могу помочь своему сообществу). Основная цель организаторов — предоставить людям с синдромом Дауна возможность быть вовлеченными в общественно-политическую и культурную жизнь общества, влиять на ситуацию в школе, на работе, в спорте и СМИ.

 

В декабре 2011 года Генеральная Ассамблея объявила 21 марта Всемирным днем людей с синдромом Дауна (A/RES/66/149). Генеральная Ассамблея постановила что зтот День будет отмечаться 21 марта каждый год начиная с 2012 года и предложила всем государствам-членам, соответствующим организациям системы Организации Объединенных Наций и другим международным организациям, а также гражданскому обществу, включая неправительственные организации и частный сектор, надлежащим образом отмечать Всемирный день людей с синдромом Дауна, с тем чтобы повышать уровень информированности общественности о синдроме Дауна.

 

Синдром Дауна является одной из форм естественно развивающейся врожденной геномной патологии, распространенной во всех регионах мира и часто ведущей к изменениям моторики, физических характеристик и здоровья.

 

Жизненно важное значение для роста и развития больных имеет адекватный доступ к медицинскому обслуживанию, программам раннего вмешательства и инклюзивного образования, а также проведение соответствующих исследований.

In fact, it is a passion of mine. In years past, when I could not do this, I so admired and envied females of whatever age for having the opportunity to dress up and look pretty and extravagant and beautiful. How I so much wanted to do the same!

 

Now I can (or at least try) to do the same :)

1 2 3 5 7 ••• 79 80