View allAll Photos Tagged Custom
I picked these old Infinity Studio 150's out of a dump, the cabinets were in excellent shape but the drivers were all shot. I had some drivers floating around that I put in. Some JBL GT 150D dual 4 ohm voice coil woofers, Speakercraft 16 ohm 5 inch midranges and some wax sealed JBL 075 8 ohm tweeters. Insulated and braced the cabinets, built new grilles (hence the veclro). Bi-amping the woofers and tweeters, running the original crossovers for the JBL 075 tweeters and custom built some crossovers for the woofer midranges. The speakers sound a lot better then I thought they would, had to tone the tweeters back a little, but these speakers play nice and low and the midrange is nice and warm
The custom Hickory Butcher block top is 1 3/4" Thick that sits on a custom designed island which features 3 bead board panels on one side.
On the reverse side, 3 equally sized drawers sit above 2 garbage pull outs on the outer ends and 2 drawers in the center. The cabinet measures 48"L x 24"D x 34 1/4"H
Custom designed to fit the client's taste & needs
It took nearly four years (mostly due to a three-year hiatus in the middle), but I finally finished the interior of my custom City Hall
This is our signature F5Pista custom finish. This ride was built up for Jason with some really nice components:
Frame : Factory Five Hand Built Lugged Frame, Columbus Cromor Tubing, Custom painted
Fork : Lugged Crowned Fork, Columbus Tubing
Saddle : BROOKS B17special with copper rails, Brown
Rims : H Plus Son, TB14 Box Rims, high polish 32 hole, CST white tires
Hubs : Novatec sealed bearing, silver 32 hole, rear coaster brake
Headset : Tange Passage, chrome
Stem : Nitto Dynamics, silver
Bars : Wood, made by O.W.W
Bottom Bracket : Tange Cartridge
Pedals : MKS Track, black with MKS clips and brown leather straps
Jason用我们的“F5 Pista”签名版手工钢架以及一些精致的配件为自己组装了一台新的倒刹单车。
车架：F5 Pista－定制涂装款手工焊接钢架,columbus cromor管材
前叉：套管平肩前叉，columbus管材
座垫：brooks b17特别版／棕色
车圈：Hson TB14平圈／抛光／32孔，正新白色外胎
花鼓：久裕轴承花鼓／银色／32孔（前），倒刹花鼓（后）
碗组：tange passage 有牙碗组／电镀银色
把立：nitto dynamics／银色
车把：O.W.W 木制车把
中轴：tange 轴承中轴
脚踏：mks sylvan／mks金属狗嘴／mks皮质狗嘴绳
Before and After. I Have been taking a brake from the first gear stuff lately, but this is my latest truck
My custom Shockwave from Revlimit arrived this weekend! Knowing my oh-so-poor painting skills first-hand, Adam agreed to paint up Shocky for me, making me eternally grateful. Can you believe that most of this guy was replicated and custom-molded? Amazing!
94" long x 48 1/2high x 22 deep base
Approximately 84" high
Just waiting on the Flat Screen TV
Hard Maple- Onyx finish
A mix of 6,7,8 and 9 speed cog wheels with eight-speed spacers.
14-16-18-21-23-26-30-34
UG and HG together at last.
re-using old boards from a recovered book, a journal trying a few different ideas. the green leather by the headcap was placed on an old cog and then sanded. the green leather is goat, the red: polished kid. the pale leather is kangaroo, which forms the closure strap, ending in a face of eyelets and blanket-stitched end.
Base momoko is 'Go For Victory'
I rerooted her as Noix de rome hair No. 39
She will get new face soon. ^-^
I anticipates great pleasure.
* Reroot - me
* Outfit - Sugar Baby Love
* Doll-house - GamJa
heading home today!
customizations:
-full face-up
-advanced lip carving
-advanced nose/philtrum carving
-1 new set of teal resin eye chips
If you are interested in purchasing your very own custom glove please visit 44progloves.com for more information
Custom House is an imposing Georgian building at the heart of The Shore area of Leith. Completed in 1812, the building retained its original use until 1980 when it became a museum store. When it was to be sold for redevelopment in 2015, The City of Edinburgh Council stepped in to acquire Custom House and appointed Scottish Historic Buildings Trust to lead its regeneration and restoration. After almost 35 years with no public access, the building is now being brought back to life as a thriving hub for the creative industries whilst the capital project to restore it is developed.
Throughout its history, Leith’s proximity to Edinburgh has ensured that its port is one of national importance. Until the late twentieth century, the existence of a Custom House close to the harbour was essential for the effective management of such a port. As a result, every major port in Scotland had a custom house and similarly-grand examples were built in Greenock, Glasgow and Dundee. However, the Leith Custom House pre-dates these and is the only survivor of the group to have so far escaped modern redevelopment.
The Custom House was commissioned by the Scottish Boards of Customs and Excise and constructed between 1810 and 1812. The chosen site, previously used for shipbuilding, was auspicious in that it was prominently visible from the sea and lay adjacent to the entrance of the new East Dock, which was completed in 1806. Once the West Dock was completed in 1817, they could hold a combined total of 150 ships, all of which had to pass immediately behind the Custom House when entering or leaving.
The building was designed by Robert Reid. The architecture was specifically intended to give the building a severe and commanding character, reminding people of the power of the government. Reid utilised the increasingly fashionable Greek Revival style, most obviously visible in the two large Doric columns on the façade. The original carved and painted Royal Arms, used by the monarch of the time King George III, have survived in the central pediment and indicate the governmental purpose for which the Custom House was built.
As the space needed by the Customs and Excise Office began to shrink, other organisations moved into the building. This included a Post Office in 1906 and the Mercantile Marine Office in the 1960s. Finally, in 1980, the decision was taken to sell the building. It was bought by the National Museum of Antiquities of Scotland (now part of the National Museum of Scotland). Despite plans to open up sections of the building for temporary exhibitions, it was used almost exclusively as storage space for the Museum’s reserve collections. [Information: SHBT Website]
Teddy troops custom "Dark Ted" 3,5".
Technique illustration poscas, finition vernis brillant..
Nombreux customs à découvrir sur www.gangtoyz.com.
Promote your business with a good quality custom imprinted calendars but in a cheap price. Visit www.laudercompany.com/ for more company calendars.
Nic Stott made this custom drum from me from scratch so I could have a kick/tom combo to loop with a Boss RC-2. Inside is a condenser mic which is held in place by a Kelly Shoe system. The jack, which is flush with shell is a combo jack which allows either an XLR out or standard 1/4" out. I'm going to run this through a equilizer pedal and then into an ABY switch so I can play the kick while laying down the first phrase of a song with my violin. Then I can tip it up and add more rhythm later on by playing it as a tom. It sounds great unamplified and though it is more the size of a regular tom, has quite a deep bass sound as a kick. Once amplified, there is very little feedback unless the gain is turned up really high. Nic is always taking orders to make custom drums, so send me a message if you are interested and I'll get you his info.
Strobist: 2 AB800s one on each side of the drum pointing towards the background at f11. Both were flagged off by bi-fold doors. 1 AB400 in an octabox on a boom in front and above the drum at f8.