600 Watt Strider power supply with modular cables. Only the cables I need are attached to the suppy which reduces clutter inside the case.

The instructions are horrible! But, you can see the wires for the HDD light, reset button, power switch and USB ports.

More connections for the case; including front audio and USB connections, and additional rear USB and Firewire connections.

More connections for the case; including front audio and USB connections, and additional rear USB and Firewire connections.

The motherboard is ready to be installed in the case.

This is where the internal card reader/writer fits into the case.

The intel chip is in place.

More connections for the case; including front audio and USB connections, and additional rear USB and Firewire connections.

Two 640 GB SATA hard drives are next. 32MB Cache. One drive is the main, and the other will be for backup.

This article may be a continuation to “Identity Protection, designed into the Chip” wherever I mentioned the principles of IPT technology, currently moving toward one thing a lot of practical: #Build associate degree IPT capable system.Basically, the desired ingredients square measure a 2ndgeneration Intel Core processor and a motherboard with Intel Q67 categorical chipset or B65 categorical chipset in conjunction with AMT version seven.1. The #Intel DQ67OW, DQ67SW, DQ67EP and DB65AL square measure four such boards. ASUS conjointly has the P8Q67-M DO, Foxconn has the Q67M and computer memory unit has the GA-Q67M-D2H-B3 and GA-P65A-UD3.

www.shipmychip.com/build-your-own-pc.html

Two 640 GB SATA hard drives are next. 32MB Cache. One drive is the main, and the other will be for backup.

The Blu-ray disk burner can handle all kinds of optical media.

This is where the internal card reader/writer fits into the case.

600 Watt Strider power supply with modular cables. Only the cables I need are attached to the suppy which reduces clutter inside the case.

This is what the front of the computer will look like.

A final look at the inside of the computer with everything installed. All the power connections have been made.

The internal card reader/writer that will allow me to access CF and SD memory cards from my cameras.

The internal card reader/writer has been installed into the front of the case.

All the parts, except the case, laid out on the table.

I had to rig the card reader/writer so that it can't be pushed into the case while being used. This was the only problem I had during installation.

The memory has been installed.

The case that will house my new computer.

The case that will house my new computer. It has a side window with blue lights so you can always see inside the machine.

The video card has been installed into the motherboard.

The internal card reader/writer has been installed into the front of the case.

One last look at the empty case. You will see that I have installed the stand-offs for the motherboard.

Here, we see the processor and the heat-sink and fan that will cool the processor.

The power supply has been installed into the case.

600 Watt Strider power supply with modular cables. Only the cables I need are attached to the suppy which reduces clutter inside the case.

Next we install the processor. An Intel Core i7 920 2.67 GHz quad-core processor.

The wires from the case have been connected. This piece can now connect to the motherboard.

This is where the internal card reader/writer fits into the case.

The memory, processor and motherboard ready to go.

This is where the processor will go.

This is what the front of the computer will look like.

The memory. 12GB of DDR3-1333 memory.

The chip will be installed here.

The internal card reader/writer has been installed into the front of the case.

The power supply has been installed into the case.

The 6 memory modules will be installed here.

The hard drives have been installed in their cage.

The Blu-ray drive will come through the top opening in the case.

The hard drives have been installed in their cage.

A final look at the front of the computer with everything installed.

The Blu-ray drive has been installed into the case.

Connections for the case to the motherboard.

The internal card reader/writer that will allow me to access CF and SD memory cards from my cameras.

A final look at the front of the computer with everything installed.

#Build #Your #Own #PC | Computer Online at low Price in India - Shipmychip. By Using Top Brands like Processor, Motherboard, RAM, Graphics Card, Hard disks, Keyboard & Mouse, Desktop, Monitor. Free Shipping and Cash on Delivery Options Across India.

www.shipmychip.com/build-your-own-pc.html

The heat-sink and fan has now been installed on the intel chip to keep it cool.