1999 PACKARD Twelve 4-Door Sedan Concept Car
There are always people who regret the Packard automobile has gone for good. Or people who hardly can except Packard is history.
But there are also people who refuse to except this fact and take action. Like Roy Gullickson, an engineer and entrepreneur from Cedar Rapids, Iowa, US.
Read the auction description below and be surprised...
This Packard Twelve prototype was designed by former GM stylist Don Johnson with important input from Roy Gullickson and Lawrence Johnson. Development started in Autumn 1993. This prototype was presented in 1999. A yearly production of at least 2000 items was intended but the necessary investments were not found. It remained with this single prototype.
It was finally offered at an auction in 2014.
See also: rmsothebys.com/auctions/sj14/lots/r112-1999-packard-twelv...
Auction description:
573 hp, 525 cu. in. OHV fuel-injected V-12 engine, four-speed GM 4L80E automatic transmission, full-time all-wheel drive, four-wheel independent suspension, and four-wheel power-assisted anti-lock disc brakes. Wheelbase: 119 in.
Some cars have presence, some cars have panache, some cars have prestige, and some cars have all that and more…like Packards. This is what inspired Roy Gullickson, entrepreneur and engineer, to pursue his dream and build the new Packard Twelve.
It began as an idea among friends during a conversation at lunch in 1991. After successfully securing the trademark rights to build a new automobile with the Packard name, concept development began during September and October of 1993. Engineering and styling work was started in January 1994 and continued through to 1996 with Gullickson and Lawrence Johnson, who were both mechanical engineers with automotive experience. The new Packard Motor Car Company and Twelve prototype were first introduced publicly at the 25th anniversary celebration of Arizona Packards in Tuscon in October 1998.
A full-size styling mock-up was developed after consultation with four professional stylists, who included Don Johnson, the former GM stylist who was responsible for the final version of the Zimmer automobile. The sub-structure is an all-aluminum space-frame chassis and body, making extensive use of proprietary high-strength, heat-treated aluminum extrusions. The special aluminum suspension A-frames and knuckles are heat-treated, then X-rayed and dye-penetrant tested to detect any porosity. Anti-squat and anti-dive geometry are included, along with 13.2-inch four-wheel disc brakes. The completed car weighs in at a comparatively light 3,750 pounds.
Power is supplied by a 573 horsepower, 525-cubic inch, all-aluminum OHV V-12. The engine was tested over a five-year period and is equipped with Delco electronic-port fuel injection, dual catalytic converters and oxygen sensors, and Delco powertrain control modules. Full-time all-wheel drive is managed by a Borg Warner transfer case with a viscous clutch and a 35/65 torque split front/rear. A GM 4L80E four-speed electronic-shift automatic transmission was chosen for effortless touring. Performance is quoted at 0–60 mph in 4.8 seconds and the quarter mile in 12.5 seconds.
Inside, you’ll find fine leather upholstery, hand-finished dark walnut veneers with aluminum backing, power front seats, and power windows and locks. Comfort items also include automatic temperature control, full instrumentation, and an AM-FM radio with a CD player and changer.
Included in the purchase of the vehicle are spare parts, such as door glass, suspension knuckles and A-frames, and taillight lenses, along with a list of components with part numbers and suppliers’ names. Historical notes and materials will be provided with the car, as well as many additional photographs and original artwork.
The car is titled under authorization of federal and state laws for “constructed” vehicles, and therefore, it is not EPA or NHTSA certified. It is truly a unique vehicle and the only one built. According to the consignor, there will be no other. He adds that over $1.5 million has been invested in the cost of engineering and building this one-off, modern-day Packard prototype.
This is one time, perhaps, you’ll have to “Ask the Man Who Owns the Only One.”
8603 cc V12 engine.
Performance: 573 bhp.
Production Packard Twelve: 1999.
Without reg. number.
This Packard is part of the Dutch Packard Collection.
Seen on the Dutch Studebaker Packard Club meeting on the occasion of the 25th anniversary of this club.
See also: www.spcn.nl/
Plus: studebakerdriversclub.com/
Bleiswijk, Hoekeindseweg, May 20, 2014.
© 2024 Sander Toonen Halfweg | All Rights Reserved
1999 PACKARD Twelve 4-Door Sedan Concept Car
There are always people who regret the Packard automobile has gone for good. Or people who hardly can except Packard is history.
But there are also people who refuse to except this fact and take action. Like Roy Gullickson, an engineer and entrepreneur from Cedar Rapids, Iowa, US.
Read the auction description below and be surprised...
This Packard Twelve prototype was designed by former GM stylist Don Johnson with important input from Roy Gullickson and Lawrence Johnson. Development started in Autumn 1993. This prototype was presented in 1999. A yearly production of at least 2000 items was intended but the necessary investments were not found. It remained with this single prototype.
It was finally offered at an auction in 2014.
See also: rmsothebys.com/auctions/sj14/lots/r112-1999-packard-twelv...
Auction description:
573 hp, 525 cu. in. OHV fuel-injected V-12 engine, four-speed GM 4L80E automatic transmission, full-time all-wheel drive, four-wheel independent suspension, and four-wheel power-assisted anti-lock disc brakes. Wheelbase: 119 in.
Some cars have presence, some cars have panache, some cars have prestige, and some cars have all that and more…like Packards. This is what inspired Roy Gullickson, entrepreneur and engineer, to pursue his dream and build the new Packard Twelve.
It began as an idea among friends during a conversation at lunch in 1991. After successfully securing the trademark rights to build a new automobile with the Packard name, concept development began during September and October of 1993. Engineering and styling work was started in January 1994 and continued through to 1996 with Gullickson and Lawrence Johnson, who were both mechanical engineers with automotive experience. The new Packard Motor Car Company and Twelve prototype were first introduced publicly at the 25th anniversary celebration of Arizona Packards in Tuscon in October 1998.
A full-size styling mock-up was developed after consultation with four professional stylists, who included Don Johnson, the former GM stylist who was responsible for the final version of the Zimmer automobile. The sub-structure is an all-aluminum space-frame chassis and body, making extensive use of proprietary high-strength, heat-treated aluminum extrusions. The special aluminum suspension A-frames and knuckles are heat-treated, then X-rayed and dye-penetrant tested to detect any porosity. Anti-squat and anti-dive geometry are included, along with 13.2-inch four-wheel disc brakes. The completed car weighs in at a comparatively light 3,750 pounds.
Power is supplied by a 573 horsepower, 525-cubic inch, all-aluminum OHV V-12. The engine was tested over a five-year period and is equipped with Delco electronic-port fuel injection, dual catalytic converters and oxygen sensors, and Delco powertrain control modules. Full-time all-wheel drive is managed by a Borg Warner transfer case with a viscous clutch and a 35/65 torque split front/rear. A GM 4L80E four-speed electronic-shift automatic transmission was chosen for effortless touring. Performance is quoted at 0–60 mph in 4.8 seconds and the quarter mile in 12.5 seconds.
Inside, you’ll find fine leather upholstery, hand-finished dark walnut veneers with aluminum backing, power front seats, and power windows and locks. Comfort items also include automatic temperature control, full instrumentation, and an AM-FM radio with a CD player and changer.
Included in the purchase of the vehicle are spare parts, such as door glass, suspension knuckles and A-frames, and taillight lenses, along with a list of components with part numbers and suppliers’ names. Historical notes and materials will be provided with the car, as well as many additional photographs and original artwork.
The car is titled under authorization of federal and state laws for “constructed” vehicles, and therefore, it is not EPA or NHTSA certified. It is truly a unique vehicle and the only one built. According to the consignor, there will be no other. He adds that over $1.5 million has been invested in the cost of engineering and building this one-off, modern-day Packard prototype.
This is one time, perhaps, you’ll have to “Ask the Man Who Owns the Only One.”
8603 cc V12 engine.
Performance: 573 bhp.
Production Packard Twelve: 1999.
Without reg. number.
This Packard is part of the Dutch Packard Collection.
Seen on the Dutch Studebaker Packard Club meeting on the occasion of the 25th anniversary of this club.
See also: www.spcn.nl/
Plus: studebakerdriversclub.com/
Bleiswijk, Hoekeindseweg, May 20, 2014.
© 2024 Sander Toonen Halfweg | All Rights Reserved