Reference Laboratory
Reference® RMC-S01 solid core microphone cable (Pro Studio Series)
RMC-S01 solid core microphone cable
Applications: microphone in Studio recording
In the picture it is assembled with the new Amphenol connectors (AX series Gold Pin)
AX3-MB-AU, AX3-FB-AU
RECOMMENDED FOR extremely demanding studio work,where the high quality of microphones should be matched quality wise by the quality of the cables connected to the mixer. Just as in performing they should not lose a single fraction, decibel or any frequency of the sounds that are being recorded. At Reference Laboratory we know how important the cable is in the audio chain and it is unthinkable for us to compromise on a performance using expensive studio microphones or any other out-board, by using generic cables to transmit sound to the console. For this reason after intensive research studies, and consulting important international recording studios, we have developed a technology using solid wires on microphone cables. This has allowed us to lower the resistance of the conductor used (for example in relation to a ordinary conductor), because of the way it is assembled, with two conductors which have identical sections over all their length. The advantage is to have a cable with a better impedance and consequently a better signal and a more linear response. Moreover, the ideal applications for the RMCS-01 are in the recording studios but without excluding the excellent results which can be obtained from live orchestral performances. To achieve an acceptable flexibility, despite the two solid internal conductors, we have used an external sheath made with a special mix of PVC.
CONSTRUCTION SPECS:
Inner conductor - Solid Bare Copper 2x(080) - 0,50 mm² AWG20
Insulation - FOAM PE diameter 2,30 mm
Filler - Cotton
Shield 1 - Tinned Copper Braid
Shield 2 - Semiconductor Tape
Jacket - PVC Superflex diameter 6,8 mm
Available colors - matte Black
Impedance - <85Ω
Working Temperature - -20 +70°C
Minimum Bending Radius - 10x Overall diameter
Reference® RMC-S01 solid core microphone cable (Pro Studio Series)
RMC-S01 solid core microphone cable
Applications: microphone in Studio recording
In the picture it is assembled with the new Amphenol connectors (AX series Gold Pin)
AX3-MB-AU, AX3-FB-AU
RECOMMENDED FOR extremely demanding studio work,where the high quality of microphones should be matched quality wise by the quality of the cables connected to the mixer. Just as in performing they should not lose a single fraction, decibel or any frequency of the sounds that are being recorded. At Reference Laboratory we know how important the cable is in the audio chain and it is unthinkable for us to compromise on a performance using expensive studio microphones or any other out-board, by using generic cables to transmit sound to the console. For this reason after intensive research studies, and consulting important international recording studios, we have developed a technology using solid wires on microphone cables. This has allowed us to lower the resistance of the conductor used (for example in relation to a ordinary conductor), because of the way it is assembled, with two conductors which have identical sections over all their length. The advantage is to have a cable with a better impedance and consequently a better signal and a more linear response. Moreover, the ideal applications for the RMCS-01 are in the recording studios but without excluding the excellent results which can be obtained from live orchestral performances. To achieve an acceptable flexibility, despite the two solid internal conductors, we have used an external sheath made with a special mix of PVC.
CONSTRUCTION SPECS:
Inner conductor - Solid Bare Copper 2x(080) - 0,50 mm² AWG20
Insulation - FOAM PE diameter 2,30 mm
Filler - Cotton
Shield 1 - Tinned Copper Braid
Shield 2 - Semiconductor Tape
Jacket - PVC Superflex diameter 6,8 mm
Available colors - matte Black
Impedance - <85Ω
Working Temperature - -20 +70°C
Minimum Bending Radius - 10x Overall diameter