linux-works
DIY: spdif switch input port: coax-in board
2 coax-in input ports, on a single 'module'.
white molex connectors on the left are the inputs; connect those to RCA jacks (do not connect shield to chassis!).
2 red molexes on the right are the corresponding TTL outputs.
white molex in the middle (in between the reds) is power supply (5v) input to power the chip.
the 2 spdif coax in channels are separate and share only chip and power supply but don't 'mix' in any other way and are isolated from each other.
DIY: spdif switch input port: coax-in board
2 coax-in input ports, on a single 'module'.
white molex connectors on the left are the inputs; connect those to RCA jacks (do not connect shield to chassis!).
2 red molexes on the right are the corresponding TTL outputs.
white molex in the middle (in between the reds) is power supply (5v) input to power the chip.
the 2 spdif coax in channels are separate and share only chip and power supply but don't 'mix' in any other way and are isolated from each other.