fig 1
One of the three units assembled. This has had the 16mm edges veneered with strips of jarrah bonded to the MDF with high-strength spray contact adhesive.
The MDF is 16mm thick and the internal surfaces were prepped with sealer and then two coats of charcoal metallic spray paint. Marks and blemishes picked up during manufacture were removed with a third coat of paint after all veneering was completed.
fig 1
One of the three units assembled. This has had the 16mm edges veneered with strips of jarrah bonded to the MDF with high-strength spray contact adhesive.
The MDF is 16mm thick and the internal surfaces were prepped with sealer and then two coats of charcoal metallic spray paint. Marks and blemishes picked up during manufacture were removed with a third coat of paint after all veneering was completed.