Haas Automation, Inc.
Ground Round
These spindles for Haas HRT450 rotary tables are fresh from the grinding department in the Haas Automation machine shop. Before grinding, the spindles were turned on a Haas ST-40 turning center, and then drilled and tapped on a Haas EC-400PP Pallet Pool horizontal machining center.
Next, each spindle will be assembled with a large-diameter aluminum-bronze gear blank, and then trammed-in on a CNC gear hobber to a maximum 2-micron runout before the worm gear is cut. After deburring and inspection, each spindle will be assembled into a reliable and accurate Haas HRT450 rotary table.
Ground Round
These spindles for Haas HRT450 rotary tables are fresh from the grinding department in the Haas Automation machine shop. Before grinding, the spindles were turned on a Haas ST-40 turning center, and then drilled and tapped on a Haas EC-400PP Pallet Pool horizontal machining center.
Next, each spindle will be assembled with a large-diameter aluminum-bronze gear blank, and then trammed-in on a CNC gear hobber to a maximum 2-micron runout before the worm gear is cut. After deburring and inspection, each spindle will be assembled into a reliable and accurate Haas HRT450 rotary table.