fcd72
Step 9 ... and connecting on the Shruthi Side
I suggest you solder the Rainbow Cable directly to the digital board on the upper side.... although you could use the 2nd provided 1x10 female connector.
Please dont scamble up the lines, the red wire is suggested to be +5V, the next 4 connect in the same order to the following pads on the Output Expansion Board. The 6th (or whatever number you choose) wire goes to the IN1 Port.
Erratum: Please IGNORE the BLACK Wire! THE WHITE WIRE CONNECTS THE PROGRAMMERS CV OUT (THE ONE PIN FAREST FROM THE LED) TO CV1 INPUT ON THE SHRUTHI!
Note: The Purple-Lavenderish is connected to nothing!
Step 9 ... and connecting on the Shruthi Side
I suggest you solder the Rainbow Cable directly to the digital board on the upper side.... although you could use the 2nd provided 1x10 female connector.
Please dont scamble up the lines, the red wire is suggested to be +5V, the next 4 connect in the same order to the following pads on the Output Expansion Board. The 6th (or whatever number you choose) wire goes to the IN1 Port.
Erratum: Please IGNORE the BLACK Wire! THE WHITE WIRE CONNECTS THE PROGRAMMERS CV OUT (THE ONE PIN FAREST FROM THE LED) TO CV1 INPUT ON THE SHRUTHI!
Note: The Purple-Lavenderish is connected to nothing!