fcd72
Step 9 Connecting on the Programmer Side of the World....
Wire the whole Mess together....
I suggest you use the provided Rainbow-Cable and 1x10 female connector to make a Cable that connects to your Shruthi-1. Use the red Wire as +5v, always facing towards the LED in the Programmer Board. The next 4 Wires connect to the Output Expansion Port on the Shruthi in the same order as in the Programmer PCB. The last, opposite outer Pin must connect to IN1 on the Shruthis Digital Board. If you have a Digital Board prior to V0.6 you can solder the Wires directly to the Board, PIC available on request.
Erratum: Please IGNORE the BLACK Wire! THE WHITE WIRE CONNECTS THE PROGRAMMERS CV OUT (THE ONE PIN FAREST FROM THE LED) TO CV1 INPUT ON THE SHRUTHI!
Step 9 Connecting on the Programmer Side of the World....
Wire the whole Mess together....
I suggest you use the provided Rainbow-Cable and 1x10 female connector to make a Cable that connects to your Shruthi-1. Use the red Wire as +5v, always facing towards the LED in the Programmer Board. The next 4 Wires connect to the Output Expansion Port on the Shruthi in the same order as in the Programmer PCB. The last, opposite outer Pin must connect to IN1 on the Shruthis Digital Board. If you have a Digital Board prior to V0.6 you can solder the Wires directly to the Board, PIC available on request.
Erratum: Please IGNORE the BLACK Wire! THE WHITE WIRE CONNECTS THE PROGRAMMERS CV OUT (THE ONE PIN FAREST FROM THE LED) TO CV1 INPUT ON THE SHRUTHI!