1:72 MiG-19bis (NATO ASCC code: "Farmer F"); aircraft "07 Blue" of the 180th Guards Fighter Aviation Regiment, Soviet Anti-Air Defence (Protivovozdushnaya Oborona Strany, PVO); Veshchevo AB (Leningrad Oblast), 1962 (Whif/Mastercraft kit conversion) - WiP
The kit and its assembly:
Another submission for the 2018 Cold War Group Build at whatifmodelers.com, and again the opportunity to build a whiffy model from the project list. But it’s as fictional as one might think, since the SM-12 line of experimental “hybrid” fighters between the MiG-19 and the MiG-21 was real. But none of these aircraft ever made it into serial production, and in real life the MiG-21 showed so much potential that the attempts to improve the MiG-19 were stopped and no operational fighter entered production or service.
However, the SM-12, with its elongated nose and the central shock cone, makes a nice model subject, and I imagined what a service aircraft might have looked like? It would IMHO have been close, if not identical, to the SM-12PM, since this was the most refined pure jet fighter in the development family.
The basis for the build was a (dead cheap) Mastercraft MiG-19, which is a re-edition of the venerable Kovozávody Prostějov (KP) kit – as a tribute to modern tastes, it comes with (crudely) engraved panel, but it has a horrible fit all over. For instance, there was a 1mm gap between the fuselage and the right wing, the wing halves’ outlines did not match at all and it is questionable if the canopy actually belongs to the kit at all? PSR everywhere. I also had a Plastyk version of this kit on the table some time ago, but it was of a much better quality! O.K., the Mastercraft kit comes cheap, but it’s, to be honest, not a real bargain.
Even though the result would not be crisp I did some mods and changes. Internally, a cockpit tub was implanted (OOB there’s just a wacky seat hanging in mid air) plus some serious lead weight in the nose section for a proper stance.
On the outside, the new air intake is the most obvious change. I found a Su-17 intake (from a Mastercraft kit, too) and used a piece from a Matchbox B-17G’s dorsal turret to elongate the nose – it had an almost perfect diameter and a mildly conical shape. Some massive PSR work was necessary to blend the parts together, though.
The tail received new jet nozzles, scratched from steel needle protection covers, and the tail fairing was adjusted according to the real SM-12’s shape.
Ordnance was adapted, too: the drop tanks come from a Mastercraft MiG-21, and these supersonic PTB-490 tanks were indeed carried by the real SM-12 prototypes because the uprated engines were very thirsty and the original, teardrop-shaped MiG-19 tanks simply too draggy for the much faster SM-12. As a side note, the real SM-12’s short range was one of the serious factors that prevented the promising type’s production in real life. In order to overcome the poor range weakness I added an enlarged spine (half of a drop tank), inspired by the MiG-21 SMT, that would house an additional internal fuel tank.
The R2-SU/K-5 AAMs come from a vintage Mastercraft Soviet aircraft weapon set, which carries a pair of these 1st generation AAMs. While the molds seem to be a bit soft, the missiles look pretty convincing. Their pylons were taken from the kit (OOB they carry unguided AAM pods and are placed behind the main landing gear wells), just reversed and placed on the wings’ leading edges – similar to the real SM-12’s arrangement.
1:72 MiG-19bis (NATO ASCC code: "Farmer F"); aircraft "07 Blue" of the 180th Guards Fighter Aviation Regiment, Soviet Anti-Air Defence (Protivovozdushnaya Oborona Strany, PVO); Veshchevo AB (Leningrad Oblast), 1962 (Whif/Mastercraft kit conversion) - WiP
The kit and its assembly:
Another submission for the 2018 Cold War Group Build at whatifmodelers.com, and again the opportunity to build a whiffy model from the project list. But it’s as fictional as one might think, since the SM-12 line of experimental “hybrid” fighters between the MiG-19 and the MiG-21 was real. But none of these aircraft ever made it into serial production, and in real life the MiG-21 showed so much potential that the attempts to improve the MiG-19 were stopped and no operational fighter entered production or service.
However, the SM-12, with its elongated nose and the central shock cone, makes a nice model subject, and I imagined what a service aircraft might have looked like? It would IMHO have been close, if not identical, to the SM-12PM, since this was the most refined pure jet fighter in the development family.
The basis for the build was a (dead cheap) Mastercraft MiG-19, which is a re-edition of the venerable Kovozávody Prostějov (KP) kit – as a tribute to modern tastes, it comes with (crudely) engraved panel, but it has a horrible fit all over. For instance, there was a 1mm gap between the fuselage and the right wing, the wing halves’ outlines did not match at all and it is questionable if the canopy actually belongs to the kit at all? PSR everywhere. I also had a Plastyk version of this kit on the table some time ago, but it was of a much better quality! O.K., the Mastercraft kit comes cheap, but it’s, to be honest, not a real bargain.
Even though the result would not be crisp I did some mods and changes. Internally, a cockpit tub was implanted (OOB there’s just a wacky seat hanging in mid air) plus some serious lead weight in the nose section for a proper stance.
On the outside, the new air intake is the most obvious change. I found a Su-17 intake (from a Mastercraft kit, too) and used a piece from a Matchbox B-17G’s dorsal turret to elongate the nose – it had an almost perfect diameter and a mildly conical shape. Some massive PSR work was necessary to blend the parts together, though.
The tail received new jet nozzles, scratched from steel needle protection covers, and the tail fairing was adjusted according to the real SM-12’s shape.
Ordnance was adapted, too: the drop tanks come from a Mastercraft MiG-21, and these supersonic PTB-490 tanks were indeed carried by the real SM-12 prototypes because the uprated engines were very thirsty and the original, teardrop-shaped MiG-19 tanks simply too draggy for the much faster SM-12. As a side note, the real SM-12’s short range was one of the serious factors that prevented the promising type’s production in real life. In order to overcome the poor range weakness I added an enlarged spine (half of a drop tank), inspired by the MiG-21 SMT, that would house an additional internal fuel tank.
The R2-SU/K-5 AAMs come from a vintage Mastercraft Soviet aircraft weapon set, which carries a pair of these 1st generation AAMs. While the molds seem to be a bit soft, the missiles look pretty convincing. Their pylons were taken from the kit (OOB they carry unguided AAM pods and are placed behind the main landing gear wells), just reversed and placed on the wings’ leading edges – similar to the real SM-12’s arrangement.