Replicator 1 - 2 - Filament dust filter v04

This small device traps dust in a small sponge before it enters the extruder. In some cases it can also be used to easily lubricate the filament just before it is extruded.

 

The adapter is designed to fit the Replicator (1) and Replicator 2 extruders.

 

Protecting your 3D printer's extruder from foreign particles is an important part of keeping the machine maintenance-free. This adapter makes it easy to keep the filament clean.

 

1 - Download the STL file

2 - 3D print it as is with standard medium or fine settings

3 - Cut two small pieces of sponge and place them into the filter case

4 - Close the case with the lid and two standard 3 mm screws

5 - Unload the filament from your Replicator 1 or 2

6 - Remove the filament guide tube

7 - Insert the loose end of the filament into the adapter.

8 - Make sure that it passes through the sponge and slides smoothly

9 - Insert the adapter into the Replicator's extruder hole

10 - Insert the filament guide tube into the top part of the adapter

11 - Enjoy hours and hours of dust-free 3D print extrusion

 

Check this Youtube video for more information:

 

Every now and then open the adapter and check the sponge for dust. Replace if necessary.

 

In some cases filament can jam or cause uneven 3D prints if the friction in the extruder's filament tube is too high. This adapter can also be used to lubricate the filament just before it enters the extruder.

 

creativetools.se/makerbot-replicator-1-2­-filament-dust-filter

Done