chinasl_solar
high pressure solar water heater
1) SL-CP system tank can work withstand over 6 bar pressure
2) The hydraulic pressure is same as tap water which would make the bathing very comfortable.
3) With the T/P valve, air vent valve makes the system work very stable and safety.
4) It is using the special heat pipe which makes higher heat transfer into the tank.
5) Anti freezing design, no water inside the tubes,so it still work when some tubes broken.
6) Luxury and solid bracket which can be mounting both on sloop and flat roof.
7) Intelligent controller and electric back up heater, work at anytime and enjoyable.
Detail Specifications:
1) Inter-tank: Food grade and high anti-corrosion SUS 304-2B stainless steel by auto weldingl& thickness:1.2mm
2) Outer-tank: Color Steel painted with corrosion layer &thickness: 0.5mm
3) Insulation: 50~60 mm Polyurethane foam (heat preservation 72hrs)
4) CollectorsΦ58×1800 heat pipe vacuum tube with Al-N/Al high selective coating
5) Heat pipe in tube: Oxygen-free copper (working temperature range: -30oC~ 300oC,0.6mm wall thickness,)
6) Installation angle: 51/45/36/28
7) Working pressure: 0.6Mpa(Testing pressure over 1.2Mpa)
8) Bracket: Hot galvanized steel painted with anti-corrosion layer & thickness:1.5mm
high pressure solar water heater
1) SL-CP system tank can work withstand over 6 bar pressure
2) The hydraulic pressure is same as tap water which would make the bathing very comfortable.
3) With the T/P valve, air vent valve makes the system work very stable and safety.
4) It is using the special heat pipe which makes higher heat transfer into the tank.
5) Anti freezing design, no water inside the tubes,so it still work when some tubes broken.
6) Luxury and solid bracket which can be mounting both on sloop and flat roof.
7) Intelligent controller and electric back up heater, work at anytime and enjoyable.
Detail Specifications:
1) Inter-tank: Food grade and high anti-corrosion SUS 304-2B stainless steel by auto weldingl& thickness:1.2mm
2) Outer-tank: Color Steel painted with corrosion layer &thickness: 0.5mm
3) Insulation: 50~60 mm Polyurethane foam (heat preservation 72hrs)
4) CollectorsΦ58×1800 heat pipe vacuum tube with Al-N/Al high selective coating
5) Heat pipe in tube: Oxygen-free copper (working temperature range: -30oC~ 300oC,0.6mm wall thickness,)
6) Installation angle: 51/45/36/28
7) Working pressure: 0.6Mpa(Testing pressure over 1.2Mpa)
8) Bracket: Hot galvanized steel painted with anti-corrosion layer & thickness:1.5mm