iacsystem
MCHRTF04C0 - FAN SPEED CONTROLLER-CUT PHASE PWM
MCHRTF04C0 - FAN SPEED CONTROLLER-CUT PHASE PWM 4A/230VAC FASTON
The MCHRTF series electronic devices are single-phase voltage controllers that use the principle
of phase control to adjust the effective voltage output to the load, based on the phase of the
PWM control signal
One typical application is the speed control of single-phase condenser fan motors, based on
the pressure or the temperature measured on the heat exchanger.
The MCHRTF controllers are protected against short circuit with a fuse located on the outside
of the board, thus allowing easy inspection and replacement, where necessary (refer to Table 3
for the correct replacement of the fuse). Always check with the manufacturers that the motors
used are suitable for operation with phase control devices.
MCHRTF04C0 - FAN SPEED CONTROLLER-CUT PHASE PWM
MCHRTF04C0 - FAN SPEED CONTROLLER-CUT PHASE PWM 4A/230VAC FASTON
The MCHRTF series electronic devices are single-phase voltage controllers that use the principle
of phase control to adjust the effective voltage output to the load, based on the phase of the
PWM control signal
One typical application is the speed control of single-phase condenser fan motors, based on
the pressure or the temperature measured on the heat exchanger.
The MCHRTF controllers are protected against short circuit with a fuse located on the outside
of the board, thus allowing easy inspection and replacement, where necessary (refer to Table 3
for the correct replacement of the fuse). Always check with the manufacturers that the motors
used are suitable for operation with phase control devices.