johndave892
Car Detailing - Caring for your Car Paint
Next to the proper maintenance of the car engine, the next in line of car detailing could be proper car paint. Maintaining the beauty of the car is necessary and this would entail minimal effort on your part.
Advances in technology made our lives easier, with modern day car painting technology, it paved the way to paint finishes using of clear coats in protecting the underlying coat from pollution, UV rays and harmful effects of the changing weather. When the car has clear coating, your car will have a shiny and good finish that you may not need or you just have to use very minimal car wax. Due to various factors such as damaging effects of the weather and accumulation of dirt, the paint of your car will start to degrade.
With consistent car detailing and proper care, you will have a shiny paint for a longer period of time.
• Wax the car as often as you like. Forget the myth that constant waxing is damaging to the car paint. A shiny and clean appearance of a car can boost the morale of the owner. Waxing is done mainly for the enhancement of the car and for protection.
• Use synthetic polymer in your base coat for maximum protection of the car paint. This can be done every six to twelve months and more often if you are in a harsh environment.
• You don’t have to go into trouble of removing the old wax before putting on the new wax even if you have a polymer sealant.
• Paste wax is the most effective among the other forms car wax. There are paste waxes in the market that produce shiny and shimmery results.
• Spray wax may be a good option as well.
• Clay bars is used for smooth and silky paint finish which should be done every two or six months depending on the place where you live and the quality of the air.
When applying the wax as part of the car detailing process, do not allow to remain it standing for more than 5 to 8 minutes before applying it in a side to side motion. Do not apply it in a circular motion for it will result in swirls. Apply wax only on a cool surface and not on a hot surface for this will cause melting and evaporation of the wax which will leave an unsightly mark and always use a pre-damped applicator pad before you start waxing.
Detailing the Car Engine
The most difficult task of car detailing is the engine. This is a very tough and delicate job especially when cars nowadays are equipped with computer system and lots of hose attachments everywhere in the engine area.
- To be extra careful, you so should cover all the sensitive parts with a heavy duty aluminum foil. Do not point the spray washer directly to the sensitive parts or you might damage this part or make a hole in the foil. If you do not have pressure washer, you can just make use of the hose.
- Apply the degreaser which can be bought commercially or you can use the kerosene mixture (50/50 water and kerosene solution). Apply this to the engine while still warm (not hot) before wetting the engine for water will lessen the strength of the cleaning process. Stubborn deposits in the different parts of the engine should be cleaned using a pointed brush. This process could be repeated until the engine is completely clean. Instead of the kerosene mixture, there are degreasing agents that are eco-friendly and priced cheap found in any home supply shops.
- Rinse the engine well.
- Start the car and put the hood down so that the moisture will evaporate quickly.
- Use a shop vac to blow off the remaining moisture and degrease the part with a rag that you have cleaned earlier.
- The engine is now ready for rubber dressing and use of silicone works best in this area. Spray all the parts except then belts. You can also spray the painted areas. Spraying with silicone will leave a shiny look to what is inside the hood. If it’s not your style to have a shiny looking engine, you can always wipe the silicon after leaving it for a while. STP protectant works best here if applied liberally.
Some people that are into car detailing on his own car or for business purposes paint some parts of the motor but then in due time it will just flake off and will give you another thing to clean on your next car detailing session. The silicone alone will give your car engine an appearance that is good as new. Some will use brass brushes and steel wool in removing the dirt and grease in the engine. This is usually done for the cars that are for display in the car shows.
If you are located in Sydney, consider the leading Sydney car detailing provider for all your car services.
Car Detailing - Caring for your Car Paint
Next to the proper maintenance of the car engine, the next in line of car detailing could be proper car paint. Maintaining the beauty of the car is necessary and this would entail minimal effort on your part.
Advances in technology made our lives easier, with modern day car painting technology, it paved the way to paint finishes using of clear coats in protecting the underlying coat from pollution, UV rays and harmful effects of the changing weather. When the car has clear coating, your car will have a shiny and good finish that you may not need or you just have to use very minimal car wax. Due to various factors such as damaging effects of the weather and accumulation of dirt, the paint of your car will start to degrade.
With consistent car detailing and proper care, you will have a shiny paint for a longer period of time.
• Wax the car as often as you like. Forget the myth that constant waxing is damaging to the car paint. A shiny and clean appearance of a car can boost the morale of the owner. Waxing is done mainly for the enhancement of the car and for protection.
• Use synthetic polymer in your base coat for maximum protection of the car paint. This can be done every six to twelve months and more often if you are in a harsh environment.
• You don’t have to go into trouble of removing the old wax before putting on the new wax even if you have a polymer sealant.
• Paste wax is the most effective among the other forms car wax. There are paste waxes in the market that produce shiny and shimmery results.
• Spray wax may be a good option as well.
• Clay bars is used for smooth and silky paint finish which should be done every two or six months depending on the place where you live and the quality of the air.
When applying the wax as part of the car detailing process, do not allow to remain it standing for more than 5 to 8 minutes before applying it in a side to side motion. Do not apply it in a circular motion for it will result in swirls. Apply wax only on a cool surface and not on a hot surface for this will cause melting and evaporation of the wax which will leave an unsightly mark and always use a pre-damped applicator pad before you start waxing.
Detailing the Car Engine
The most difficult task of car detailing is the engine. This is a very tough and delicate job especially when cars nowadays are equipped with computer system and lots of hose attachments everywhere in the engine area.
- To be extra careful, you so should cover all the sensitive parts with a heavy duty aluminum foil. Do not point the spray washer directly to the sensitive parts or you might damage this part or make a hole in the foil. If you do not have pressure washer, you can just make use of the hose.
- Apply the degreaser which can be bought commercially or you can use the kerosene mixture (50/50 water and kerosene solution). Apply this to the engine while still warm (not hot) before wetting the engine for water will lessen the strength of the cleaning process. Stubborn deposits in the different parts of the engine should be cleaned using a pointed brush. This process could be repeated until the engine is completely clean. Instead of the kerosene mixture, there are degreasing agents that are eco-friendly and priced cheap found in any home supply shops.
- Rinse the engine well.
- Start the car and put the hood down so that the moisture will evaporate quickly.
- Use a shop vac to blow off the remaining moisture and degrease the part with a rag that you have cleaned earlier.
- The engine is now ready for rubber dressing and use of silicone works best in this area. Spray all the parts except then belts. You can also spray the painted areas. Spraying with silicone will leave a shiny look to what is inside the hood. If it’s not your style to have a shiny looking engine, you can always wipe the silicon after leaving it for a while. STP protectant works best here if applied liberally.
Some people that are into car detailing on his own car or for business purposes paint some parts of the motor but then in due time it will just flake off and will give you another thing to clean on your next car detailing session. The silicone alone will give your car engine an appearance that is good as new. Some will use brass brushes and steel wool in removing the dirt and grease in the engine. This is usually done for the cars that are for display in the car shows.
If you are located in Sydney, consider the leading Sydney car detailing provider for all your car services.