spaceguy19
Combo_Dip_Pull-up-01
Just my Dip stand with added pipe to make it also a Pull-up Station. In this variation I've narrowed the one end. So instead of say four 12 inch pieces of pipe at the bottom you would use two 12 inch and two 10 inch between the Tees and the 24 inch spreader pipe. --- I just notices this! A 3/4 inch TEE is about 2 12 inches long and you would add about 2 inches to the length. The point is you need 1- 12 inch piece of pipe and 1- 10 inch piece of pipe plus the TEE to make up 24 inches. So the "H" at the bottom is actually made up of the 12 and 10 plus 1- 8 inch piece of pipe and 1- 6 inch piece of pipe with a 24 inch piece of pipe forming the brace between.
Combo_Dip_Pull-up-01
Just my Dip stand with added pipe to make it also a Pull-up Station. In this variation I've narrowed the one end. So instead of say four 12 inch pieces of pipe at the bottom you would use two 12 inch and two 10 inch between the Tees and the 24 inch spreader pipe. --- I just notices this! A 3/4 inch TEE is about 2 12 inches long and you would add about 2 inches to the length. The point is you need 1- 12 inch piece of pipe and 1- 10 inch piece of pipe plus the TEE to make up 24 inches. So the "H" at the bottom is actually made up of the 12 and 10 plus 1- 8 inch piece of pipe and 1- 6 inch piece of pipe with a 24 inch piece of pipe forming the brace between.