BAC Jet Provost
To view more of my images of aircraft and space craft, click "here" !
The BAC Jet Provost was a British jet-powered trainer aircraft that was in use with the Royal Air Force (RAF) from 1955 to 1993. It was originally developed by Hunting Percival from the earlier piston engine-powered Percival Provost basic trainer, and later produced by the British Aircraft Corporation (BAC). In addition to the multiple orders that were placed for the RAF, the Jet Provost also attained several export deals with overseas operators, resulting in the type serving in many air forces worldwide. The design was also further developed into a more heavily-armed variant for ground attack mission, which was marketed as the BAC Strikemaster. In early 1951, Hunting Percival began work on the design studies that would ultimately lead to the Jet Provost. At the time, the company in the process of establishing mass production for the earlier piston-engined Percival Provost basic trainer, but had anticipated that demand for a jet-powered trainer aircraft would be on the horizon. The design team aimed to produce an aircraft capable of equaling the handling characteristics of operational jet fighters of the era while also possessing modest approach and stall speeds and remaining simple to handle, as opposed to aiming to obtain maximum performance. The prototype Jet Provost T.1 with the initial longer undercarriage at the Farnborough Air Show in 1954
During the early design process, a series of increasingly frequent liaisons with RAF Flying Training Command took place, helping to gauge the considerations required to succeed in aspects of the proposed aircraft's design, such as instructional processes and maintenance requirements. During development, Hunting Percival had intentionally reused as many existing components and subsystems of the Percival Provost as possible, including the tail surfaces, main planes and main undercarriage legs, to speed development through to the prototype stage. The initial design work was performed as a private venture, independent of any service requirement; in March 1953, sponsorship from the British Government to support the development was made available as a result of interest from the Ministry of Supply. That same month, an order for service-test quantity of Jet Provosts was received. On 16 June 1954, the prototype XD674 conducted its maiden flight from the factory at Luton Airport, flown by Dick Wheldon. A series of seven flights were flown in quick succession over the following three days. By early November 1954, a total of 123 flying hours had been accumulated by the prototype during Hunting Percival's own flight test program, after which the prototype was submitted for official trials at RAF Boscombe Down. While testing proved the overall performance of the Jet Provost to be satisfactory, refinements such as shortening the legs of the landing gear for a smoother ride when deployed at semi-prepared airstrips. On 19 February 1955, the first of ten pre-production aircraft, designated as the Jet Provost T1, performed its first flight. In May 1955, three of the pre-production aircraft were assigned for the first stage of service trials with the Central Flying School (CFS) of the RAF to determine the value of the Jet Provost in the ab initio training role and to develop a syllabus for the training program. During the second stage of CFS trials using the same three aircraft, actual students were introduced to the type for practical evaluation purposes, which was performed at RAF Hullavington until the successful completion of trials on 2 July 1956. According to feedback from CFS examiners, the Jet Provost had noticeably improved the performance of students during its trial deployment. As a result of the results and responses produced from the trials performed using the pre-production aircraft, Hunting Percival proceeded to develop and incorporate several different improvements upon the design. Amongst the changes made was an overall smoothening of the fuselage lines, hydraulic systems being substituted for pneumatic counterparts, and the addition of a dorsal fillet; the new model was designated as the Jet Provost T2. On 1 September 1955, the first Jet Provost T2 made its first flight. This variant was used only for development work; in addition to seeing use at Hullavington, three Jet Provost T2s were dispatched overseas for winterization trials in Scandinavia and a series of sales tours across Europe, Canada, the United States of America, and Latin America. In June 1957, an production order was placed for the first 40 of the developed Jet Provost T3, featuring a more powerful Armstrong Siddeley Viper jet engine, ejector seats, a redesign of the airframe, and a shortened and strengthened version of the retractable tricycle undercarriage. Percival built a single example, which was used purely for structural tests throughout the development stages, giving the designers valuable research into what could be achieved with the basic design. On 22 June 1958, the first Jet Provost T.3 conducted its first flight. In total, 201 T3s were delivered between 1958 and 1962. The T4 followed in 1960, fitted with a more powerful variant of the Viper engine and first flown on 15 July, and this was followed by the pressurised T5 in 1967. The T51 was an armed export version, sold to Ceylon (Sri Lanka), Kuwait and Sudan. It was armed with two 7.7-mm (0.303-inch) machine guns. The T52 was another export version sold to Iraq, South Yemen, Sudan and Venezuela, with the same armament as the T51. The T55 was the final armed export version which was sold to Sudan. A more heavily armed variant of the airframe was developed as the BAC Strikemaster.
From Wikipedia, the free encyclopedia
BAC Jet Provost
To view more of my images of aircraft and space craft, click "here" !
The BAC Jet Provost was a British jet-powered trainer aircraft that was in use with the Royal Air Force (RAF) from 1955 to 1993. It was originally developed by Hunting Percival from the earlier piston engine-powered Percival Provost basic trainer, and later produced by the British Aircraft Corporation (BAC). In addition to the multiple orders that were placed for the RAF, the Jet Provost also attained several export deals with overseas operators, resulting in the type serving in many air forces worldwide. The design was also further developed into a more heavily-armed variant for ground attack mission, which was marketed as the BAC Strikemaster. In early 1951, Hunting Percival began work on the design studies that would ultimately lead to the Jet Provost. At the time, the company in the process of establishing mass production for the earlier piston-engined Percival Provost basic trainer, but had anticipated that demand for a jet-powered trainer aircraft would be on the horizon. The design team aimed to produce an aircraft capable of equaling the handling characteristics of operational jet fighters of the era while also possessing modest approach and stall speeds and remaining simple to handle, as opposed to aiming to obtain maximum performance. The prototype Jet Provost T.1 with the initial longer undercarriage at the Farnborough Air Show in 1954
During the early design process, a series of increasingly frequent liaisons with RAF Flying Training Command took place, helping to gauge the considerations required to succeed in aspects of the proposed aircraft's design, such as instructional processes and maintenance requirements. During development, Hunting Percival had intentionally reused as many existing components and subsystems of the Percival Provost as possible, including the tail surfaces, main planes and main undercarriage legs, to speed development through to the prototype stage. The initial design work was performed as a private venture, independent of any service requirement; in March 1953, sponsorship from the British Government to support the development was made available as a result of interest from the Ministry of Supply. That same month, an order for service-test quantity of Jet Provosts was received. On 16 June 1954, the prototype XD674 conducted its maiden flight from the factory at Luton Airport, flown by Dick Wheldon. A series of seven flights were flown in quick succession over the following three days. By early November 1954, a total of 123 flying hours had been accumulated by the prototype during Hunting Percival's own flight test program, after which the prototype was submitted for official trials at RAF Boscombe Down. While testing proved the overall performance of the Jet Provost to be satisfactory, refinements such as shortening the legs of the landing gear for a smoother ride when deployed at semi-prepared airstrips. On 19 February 1955, the first of ten pre-production aircraft, designated as the Jet Provost T1, performed its first flight. In May 1955, three of the pre-production aircraft were assigned for the first stage of service trials with the Central Flying School (CFS) of the RAF to determine the value of the Jet Provost in the ab initio training role and to develop a syllabus for the training program. During the second stage of CFS trials using the same three aircraft, actual students were introduced to the type for practical evaluation purposes, which was performed at RAF Hullavington until the successful completion of trials on 2 July 1956. According to feedback from CFS examiners, the Jet Provost had noticeably improved the performance of students during its trial deployment. As a result of the results and responses produced from the trials performed using the pre-production aircraft, Hunting Percival proceeded to develop and incorporate several different improvements upon the design. Amongst the changes made was an overall smoothening of the fuselage lines, hydraulic systems being substituted for pneumatic counterparts, and the addition of a dorsal fillet; the new model was designated as the Jet Provost T2. On 1 September 1955, the first Jet Provost T2 made its first flight. This variant was used only for development work; in addition to seeing use at Hullavington, three Jet Provost T2s were dispatched overseas for winterization trials in Scandinavia and a series of sales tours across Europe, Canada, the United States of America, and Latin America. In June 1957, an production order was placed for the first 40 of the developed Jet Provost T3, featuring a more powerful Armstrong Siddeley Viper jet engine, ejector seats, a redesign of the airframe, and a shortened and strengthened version of the retractable tricycle undercarriage. Percival built a single example, which was used purely for structural tests throughout the development stages, giving the designers valuable research into what could be achieved with the basic design. On 22 June 1958, the first Jet Provost T.3 conducted its first flight. In total, 201 T3s were delivered between 1958 and 1962. The T4 followed in 1960, fitted with a more powerful variant of the Viper engine and first flown on 15 July, and this was followed by the pressurised T5 in 1967. The T51 was an armed export version, sold to Ceylon (Sri Lanka), Kuwait and Sudan. It was armed with two 7.7-mm (0.303-inch) machine guns. The T52 was another export version sold to Iraq, South Yemen, Sudan and Venezuela, with the same armament as the T51. The T55 was the final armed export version which was sold to Sudan. A more heavily armed variant of the airframe was developed as the BAC Strikemaster.
From Wikipedia, the free encyclopedia