WY-21 "Our Henry ii" MMSI: 232057836
I thought this vessel looked new and it is. "Our Henry ii", The 14 x 6 meter Cougar Displacement Catamaran Arrived on the 6th of January 2025 and is operated by Whitby Lobster Hatchery.
Built by Audacious Marine Boats & Mouldings Ltd, Ramsgate in 2024 to a design built to a new design by the late Dave Sutton.
Our Henry II has the following equipment:
Twin Iveco 6 cylinder 90 HP per side Supplied by Breakwater
Marine in Brixham with twin disc 2:1 gearboxes driving a 24 x 24 five bladed propellers supplied by Michigan Marine Propulsion from Newton Abbott
Kobelt Steering coupled with a tie bar between the 2 hulls, supplied by Peter Morgan of Helmsman Systems.
2 fish holds and 1000 L fuel tanks per side
Top speed of 9.5 knots dead water.
62sq metre deck with a shooting door in the centre of the stern. Located at the forward end is the sorting table and roller with built-in bait station and outside dual controls, and a
door leading to the wheelhouse and accommodation.”
The hydraulic pump, clutch, tanks and 1 tonne pot slave
were supplied by Spencer Carter and the gunwale roller
by Sutton Workboats.”
The electronics package includes
Furuno FCV-588 Sounder,
Furuno GP-32 GPS,
2x Icom M323G VHF’s,
Simrad, 10.4” LCD Radar,
4Kw Plotter Olex plotter,
3 x 12v Neovo X-17 LCD Screens,
Raymarine ES Series 12.1”plotter,
UK navionics + chart(sonar charts),
Simrad AP60A/P Autopilot,
24v 1.5lpm reversing pump,
Radio Fusion RA50 marine radio
and a Bluetooth module &
2x slimline 6” speaker.
The accommodation includes provision for 3 bunk for longer fishing trips in the future,
"Our Henry II" is the second vessel of its class built by Audacious Marine Boats And Mouldings
The first is DE-1 Sienna {MMSI: 232044698} which has an LOA of 14m and a width of 7m built in 2023, and is currently located at Wick
WY-21 "Our Henry ii" MMSI: 232057836
I thought this vessel looked new and it is. "Our Henry ii", The 14 x 6 meter Cougar Displacement Catamaran Arrived on the 6th of January 2025 and is operated by Whitby Lobster Hatchery.
Built by Audacious Marine Boats & Mouldings Ltd, Ramsgate in 2024 to a design built to a new design by the late Dave Sutton.
Our Henry II has the following equipment:
Twin Iveco 6 cylinder 90 HP per side Supplied by Breakwater
Marine in Brixham with twin disc 2:1 gearboxes driving a 24 x 24 five bladed propellers supplied by Michigan Marine Propulsion from Newton Abbott
Kobelt Steering coupled with a tie bar between the 2 hulls, supplied by Peter Morgan of Helmsman Systems.
2 fish holds and 1000 L fuel tanks per side
Top speed of 9.5 knots dead water.
62sq metre deck with a shooting door in the centre of the stern. Located at the forward end is the sorting table and roller with built-in bait station and outside dual controls, and a
door leading to the wheelhouse and accommodation.”
The hydraulic pump, clutch, tanks and 1 tonne pot slave
were supplied by Spencer Carter and the gunwale roller
by Sutton Workboats.”
The electronics package includes
Furuno FCV-588 Sounder,
Furuno GP-32 GPS,
2x Icom M323G VHF’s,
Simrad, 10.4” LCD Radar,
4Kw Plotter Olex plotter,
3 x 12v Neovo X-17 LCD Screens,
Raymarine ES Series 12.1”plotter,
UK navionics + chart(sonar charts),
Simrad AP60A/P Autopilot,
24v 1.5lpm reversing pump,
Radio Fusion RA50 marine radio
and a Bluetooth module &
2x slimline 6” speaker.
The accommodation includes provision for 3 bunk for longer fishing trips in the future,
"Our Henry II" is the second vessel of its class built by Audacious Marine Boats And Mouldings
The first is DE-1 Sienna {MMSI: 232044698} which has an LOA of 14m and a width of 7m built in 2023, and is currently located at Wick