Chevrolet Bel Air Hardtop Police Cruiser - 1953 MotorCity
First generation (1950–1954)
For 1950, Chevrolet came up with a revolutionary style that would set a pattern for decades. The Bel Air Hardtop was styled as a convertible with a non-detachable solid roof. Models like this had been around since the 1920s, including early Chevrolets, with no degree of success. But the newly revised idea, sweeping the GM line from Chevrolet to Cadillac, had finally found its era. First year production reached only 76,662 as buyers cautiously tested the revised concept. The car cost $1,741 and weighed 3,225 lb (1,463 kg). Front suspension was independent, named "knee-action".
The first Bel Airs of this era shared only their front sheetmetal ahead of the A pillar with the rest of the range. The Windshield, doors, glass, and trunk were common with the Styline DeLuxe Convertible Coupe, however the roof, rear quarters and rear windows (3) were unique. The chassis and mechanicals are common with the rest of the passenger car range, and the overall appearance is the same as the rest of the range except that the roof line is lower and the unique three piece rear window give it a longer and more balanced look. The first Bel Airs were only available with the "DeLuxe" premium trim level and specification.
Apart from the usual annual grille and trim changes the 1951–1952 Bel Air differs from the earlier 1950 model with introduction of the higher and squarer rear guards that were across the whole range.
In 1953 Chevrolet renamed its series and the Bel Air name was applied to the premium model range. Two lower series, the 150 and 210, also emerged (as successors to the Special and Deluxe series, respectively). The 1953 Chevrolet was advertised as "Entirely new through and through," due to the restyled body panels, front and rear ends. However, essentially these Chevrolets had similar frame and mechanicals to the 1949–1952 cars. The 1953–1954 Chevrolet range had a unique and somewhat awkward look about it and much of this stemmed from its role as a transitional model to introduce a raft of changes that were necessary to pave the way for the introduction of the 1955–1957 range that really established the Bel Air as a cultural icon. The pre-war technology: such as torque tube drive, six-cylinder splash feed engines, knee action suspension, split windshields, etc., of the early models was phased out and the foundations for the first post war modern Chevrolet passenger car were finalized in this 1953–1954 model. Of all the Bel Air variants available across the 1953–1954 range, the two door hardtop and convertible remain the stand outs in terms of style. The Bel Air series featured a wide chrome strip of molding from the rear fender bulge, to the rear bumper. The inside of this stripe was painted a coordinating color with the outside body color, and "Bel Air" scripts were added inside the strip. Lesser models had no model designation anywhere on the car, only having a Chevy crest on the hood and trunk. 1953 was the first year for a curved, one-piece windshield. Bel Air interiors had an optional massive expanse of chrome across the lower part of the dashboard (most were painted), along with a deluxe Bel Air steering wheel with full chrome horn ring. Carpeting and full wheel covers rounded out Bel Air standard equipment. For 1954, the Bel Air stayed essentially the same, except for a revised grille and taillights, and a revised engine that had insert bearings and higher oil pressure, needed for the full-flow oil filtration system that was not available prior to 1954. Prior to 1954, the 235 and 216 cubic inch six cylinder engines had babbit bearings and scoops to create oil pressure at the bottom of each rod and the oil pressure was standard at 15-30 PSI. During these years, there were three engine choices, depending on the transmission ordered. Both 235 cubic inch engines were "Blue Flame" inline six cylinder OHV engines, featuring hydraulic valve lifters (in 1953 with automatic transmissions) and aluminum pistons. The 106 hp (79 kW) 235 cubic inch displacement engine was standard on stickshift models, with solid lifters and splash plus pressure lubrication including babbit bearings. Powerglide cars got a 115 hp (86 kW) version which had hydraulic lifters and full pressure lubrication.
In 1953 and 1954, Bel Airs could be ordered in convertible, hardtop coupe, two- and four-door sedans, and, for 1954, the Beauville station wagon which featured woodgrain trim around the side windows. Many new options, once available only to more expensive luxury cars, became offered starting in 1953, including power steering and the Guidematic headlight dimmer in 1953; and power brakes, power 2-way front seat and power front windows in 1954. All 1954 models equipped with the standard transmission used the 1953 Powerglide engine.
[Text from Wikipedia]
en.wikipedia.org/wiki/Chevrolet_Bel_Air
This Lego MotorCIty 1953 Chevrolet Bel Air Police Cruiser has been created for Flickr LUGNuts' 96th Build Challenge - The 8th Birthday, titled - 'Happy Crazy Eight Birthday, LUGNuts' - where all previous build challenges are available to build to. This model is built to the LUGNuts 68th Build Challenge, - "A Baker's Dozen" - a challenge to build a vehicle to various subthemes. This Bel Air is built to subtheme 9 - "Any emergency vehicle...police, fire, ambulance, etc."
Chevrolet Bel Air Hardtop Police Cruiser - 1953 MotorCity
First generation (1950–1954)
For 1950, Chevrolet came up with a revolutionary style that would set a pattern for decades. The Bel Air Hardtop was styled as a convertible with a non-detachable solid roof. Models like this had been around since the 1920s, including early Chevrolets, with no degree of success. But the newly revised idea, sweeping the GM line from Chevrolet to Cadillac, had finally found its era. First year production reached only 76,662 as buyers cautiously tested the revised concept. The car cost $1,741 and weighed 3,225 lb (1,463 kg). Front suspension was independent, named "knee-action".
The first Bel Airs of this era shared only their front sheetmetal ahead of the A pillar with the rest of the range. The Windshield, doors, glass, and trunk were common with the Styline DeLuxe Convertible Coupe, however the roof, rear quarters and rear windows (3) were unique. The chassis and mechanicals are common with the rest of the passenger car range, and the overall appearance is the same as the rest of the range except that the roof line is lower and the unique three piece rear window give it a longer and more balanced look. The first Bel Airs were only available with the "DeLuxe" premium trim level and specification.
Apart from the usual annual grille and trim changes the 1951–1952 Bel Air differs from the earlier 1950 model with introduction of the higher and squarer rear guards that were across the whole range.
In 1953 Chevrolet renamed its series and the Bel Air name was applied to the premium model range. Two lower series, the 150 and 210, also emerged (as successors to the Special and Deluxe series, respectively). The 1953 Chevrolet was advertised as "Entirely new through and through," due to the restyled body panels, front and rear ends. However, essentially these Chevrolets had similar frame and mechanicals to the 1949–1952 cars. The 1953–1954 Chevrolet range had a unique and somewhat awkward look about it and much of this stemmed from its role as a transitional model to introduce a raft of changes that were necessary to pave the way for the introduction of the 1955–1957 range that really established the Bel Air as a cultural icon. The pre-war technology: such as torque tube drive, six-cylinder splash feed engines, knee action suspension, split windshields, etc., of the early models was phased out and the foundations for the first post war modern Chevrolet passenger car were finalized in this 1953–1954 model. Of all the Bel Air variants available across the 1953–1954 range, the two door hardtop and convertible remain the stand outs in terms of style. The Bel Air series featured a wide chrome strip of molding from the rear fender bulge, to the rear bumper. The inside of this stripe was painted a coordinating color with the outside body color, and "Bel Air" scripts were added inside the strip. Lesser models had no model designation anywhere on the car, only having a Chevy crest on the hood and trunk. 1953 was the first year for a curved, one-piece windshield. Bel Air interiors had an optional massive expanse of chrome across the lower part of the dashboard (most were painted), along with a deluxe Bel Air steering wheel with full chrome horn ring. Carpeting and full wheel covers rounded out Bel Air standard equipment. For 1954, the Bel Air stayed essentially the same, except for a revised grille and taillights, and a revised engine that had insert bearings and higher oil pressure, needed for the full-flow oil filtration system that was not available prior to 1954. Prior to 1954, the 235 and 216 cubic inch six cylinder engines had babbit bearings and scoops to create oil pressure at the bottom of each rod and the oil pressure was standard at 15-30 PSI. During these years, there were three engine choices, depending on the transmission ordered. Both 235 cubic inch engines were "Blue Flame" inline six cylinder OHV engines, featuring hydraulic valve lifters (in 1953 with automatic transmissions) and aluminum pistons. The 106 hp (79 kW) 235 cubic inch displacement engine was standard on stickshift models, with solid lifters and splash plus pressure lubrication including babbit bearings. Powerglide cars got a 115 hp (86 kW) version which had hydraulic lifters and full pressure lubrication.
In 1953 and 1954, Bel Airs could be ordered in convertible, hardtop coupe, two- and four-door sedans, and, for 1954, the Beauville station wagon which featured woodgrain trim around the side windows. Many new options, once available only to more expensive luxury cars, became offered starting in 1953, including power steering and the Guidematic headlight dimmer in 1953; and power brakes, power 2-way front seat and power front windows in 1954. All 1954 models equipped with the standard transmission used the 1953 Powerglide engine.
[Text from Wikipedia]
en.wikipedia.org/wiki/Chevrolet_Bel_Air
This Lego MotorCIty 1953 Chevrolet Bel Air Police Cruiser has been created for Flickr LUGNuts' 96th Build Challenge - The 8th Birthday, titled - 'Happy Crazy Eight Birthday, LUGNuts' - where all previous build challenges are available to build to. This model is built to the LUGNuts 68th Build Challenge, - "A Baker's Dozen" - a challenge to build a vehicle to various subthemes. This Bel Air is built to subtheme 9 - "Any emergency vehicle...police, fire, ambulance, etc."