500 Gallon Plastic Water Tanks - Insulated

500 Gallon Nominal Capacity GRP One Piece Insulated Plastic Water Tank

Plastic Water Tank Manufactured to BS EN 13280, made from WRAS Approved Materials (also to Byelaw 30)

 

Internal Dimensions (L x W x H): 1830 x 1220 x 1017mm

 

External Dimensions (L x W x H): 2000 x 1390 x 1117mm

 

Made from Glass Reinforced Plastic with a Gelcoat internal surface to prevent bacterial growth and importantly helps to keep the water as clean and fresh as possible.

 

The tank has Insulation encapsulated into the tank walls and Lid, as a result the external finish is cleaner.

 

Supplied with a Flange around the top of the tank with a Lid Sealer running around the top In addition to An Insulated Bolted Lid ensuring the prevention of light into the tank and moreover the ingress of debris and Insects.

 

Tank is WRAS Approved,

 

Which above all other details the most important part for any drinking water tank.

Wras Approval ensures the tank is suitable for use as a potable vessel.

 

For more information on WRAS Approvals please Click Here

 

Gallons are Nominal Capacity (to the Brim of the Tank)

Tank Requires a Flat Fully Supported Base for the tank to sit on, this base should be as flat as possible as to not distort the tank once positioned on the base.

There is a slight Taper on the Height of the tank of approximately 20mm, therefore the top of the tank is 20mm wider than at the base.

 

There is a 25mm radius at the edge of each wall of the tank and also onto base.

 

bit.ly/3PQY5vN

Done