sandblastinghopper123
shotblasting machine
Shot Blasting Machines | Shot Blasting Machine in India
From: sand blasting hopper
Shot Blasting Machine
The Shot Blasting Machine uses a method call propelling abrasive media with the help of a radial wheel to remove the damage or contaminants from the surface of metal and steel. The Shot Blasting Machine basically cleans and remove the loose scales from the surface of metal and steel.with the help of this machine we can also clean the rough surface edges of automobile parts that have uneven or sharp surface.
Shot Blasting Machine is used as a mechanical method for the surface treatment by using an abrasive with the help of a centrifugal wheel at high speed to obtain excellent surface and remove impurities for secondary operations.
Shot blasting is used for the following main purposes:
It provides a better texture to enhance paint adhesion.
It increases the coating life of a machine by reducing its maintenance cost.
For cleaning and preparing the surface before painting, coating, metalworking.
It also used for making non-slipping surfaces and providing surface homogenization.
Shot blasting is done after heat treatment and also for mechanic descaling.
The shot blasting is done in two ways:
Wheel blasting: It is a common and economical method. In this process, the electric motor energy is converted into kinetic energy by rotating a turbine wheel. This is mostly used for treating heavy equipment. The turbine wheel works here as a centrifugal pump and it delivers the abrasive by centrifugal force on the surface.
Air blasting: In this method compressed is used and sprayed out through nozzles on the surface. This is mostly used for smaller equipment. Air blasting is comparatively expensive due to the use of steel frames and weldments.
After the process of shot blasting, shots are removed by the air washing process.
The shot blasting machine works on the projectile motion of an abrasive on the metal surface to get a better surface finish. So, this mechanical method depends on the abrasive. For this, mostly metal abrasive should be used.
Metal abrasives can provide the following benefits:
They can increase productivity by reducing maintenance costs.
Waste generation can be reduced to get better quality of work.
They cause less environmental pollution and also there is no risk to the operator’s health by using metal abrasive.
The main components of the shot blasting are:
Blast wheel: The efficiency of a shot blasting machine depends on the quality of wheels used. So one used to use a better quality of the wheel.
Cabinet: Cabinet consists of dust and abrasive. The shot blasting cabinet is made up of steel material to secure strength. A dust collector is mounted on the machine to prevent dust from entering the shop environment.
Work handling mechanism: Handling of parts depends on the quantity of the parts. Tumblast Shot Blasting Machines are used for large quantities and spinner hangers are used for heavier parts.
Elevator: After the metallic shots hit the surface they fall into the hopper under the machine from which the elevator carries them to the separator at the upper part of the machine.
Separator: The separator, separates contaminates, and the cleaned abrasive is fed into the shot turbine.
Dust collector: A dust collector system is used to release clean air. A properly designed and sized dust collector is preferred for shot blasting machines.
Control and instrumentation: The starting and stopping of all operations depend on the controls and instrumentation features of the shot blasting machines.
The shot blasting machine is mostly used in chemical industries, petroleum industries, Aerospace, Automobile industry, Heavy engineering industry, Railways, Defence.
We are the leading Manufacturer, Supplier, and Exporter of different kinds of Sand Blasting machines and blasting equipment, Shot Blasting Machines, Sand Blasting Cabinet, Shot Blasting Cabinet, pressure blasting cabinet, Shot Blasting Room, Automatic Sand Blasting Machine, thermal spray gun, Metalizing Gun in India at a low price for Sale.
Ps Balls | Ps Ball Manufacturer in India
From: sand blasting hopper
Ps Balls
It gives a perfect atomizing of elements size, density, hardness, and durability. Therefore, the effectiveness of abrasive reduces the consumption rate and increases productivity as well as non-toxic environment status. PS Ball is a cheap material when compared to other mineral substances. PS Ball can be reused up to 3-4 times based on its surface roughness.
Product Details:
Color: Black
State: Grains
Hardness: 7.5 mohs
Types of Cutting: Sand blasting
Density: 3.64 g/㎤
Fe2O3: 43.5%
SiO2: 19.5%
Ps Balls
PS Ball stands for Precious Slag Ball. PS Ball is the great product of the slag atomizing process. We named it precious since it is turned from valueless waste into newborn material with good value-added. It is an environment-friendly substance with a stable status of spinet structure by rapid air & mist cooling system, proven by professionals. PS Ball is designed by supercooling molten steel slag. it's an exciting and versatile product that's highly stable, hard, and extremely tough. Its superior features make it suitable for an outsized range of applications and its most typical usage is as an abrasive for the surface preparation of steel before the application of paint coatings. As PS Ball doesn't contain Free Silica, it's non-toxic and in compliance with environmental regulations the world over. As compared to copper slag, it's superior compressive strength, hardness, and anti-weathering characteristics.
Advantages of Ps Balls
Excellent hardness for blasting.
Improve the efficiency of work.
Less dust during the sand blasting machine work than silica or garnet.
Reuse available (2~3 times) by recycling equipment.
Good intensity of illumination.
Uses of Ps Balls
Abrasive Blasting Material.
Filter Media.
Casting Sand.
Weight Material.
Industrial Uses
Shipbuilding.
Steel Bridges.
Heavy Steel Structure.
Storage Tanks.
We provide steel shot, SS shot, copper slag, steel grit, garnet sand, quartz shot, aluminum oxide, glass beads, etc. We provide a large range of products and are checked on various parameters, such as density, physical and chemical properties, microstructure, hardness, durability. We are focused on our quality products and customer satisfaction.
Glass Beads | Glass Beads Manufacturer in India
From: sand blasting hopper
Glass beads
Glass beads mostly used in the abrasive blast cabinet. they are round in shape and smoothly cleans metal part with a smooth polish. pressure on which glass beads are blasted is 60-90 PSI to get the highest productivity result.
The appearance of Glass Beads are spherical and round . Glass Beads are available in all standard sizes. They are good for the environment and reliable. glass beads clean the surface without damaging them and they are recyclable. Glass Beads can perform a variety of operations. the dust level is also low and due to this reason, the cleanup maintenance is reduced. To get polished or smooth surface glass beads are shot on the surface of the object or work-piece under the pressure of compressed gas with high speed and after that, we will find a smooth and clean polished surface.
Uses of Glass Beads
Cleaning of Automotive parts.
Casting.
Deburring of rough edges.
Maintenance of Gears.
Applications
Metal preparation
surface finishing
We are a Manufacturer, Supplier, and Exporter of Sand Blasting Machine, Tumblast Shot Blasting Machine, Grit Blasting Machine, thermal spray gun, Sand Blasting Cabinet, Shot Blasting Room, Pressure blasting Cabinet, Metalizing Gun.
shotblasting machine
Shot Blasting Machines | Shot Blasting Machine in India
From: sand blasting hopper
Shot Blasting Machine
The Shot Blasting Machine uses a method call propelling abrasive media with the help of a radial wheel to remove the damage or contaminants from the surface of metal and steel. The Shot Blasting Machine basically cleans and remove the loose scales from the surface of metal and steel.with the help of this machine we can also clean the rough surface edges of automobile parts that have uneven or sharp surface.
Shot Blasting Machine is used as a mechanical method for the surface treatment by using an abrasive with the help of a centrifugal wheel at high speed to obtain excellent surface and remove impurities for secondary operations.
Shot blasting is used for the following main purposes:
It provides a better texture to enhance paint adhesion.
It increases the coating life of a machine by reducing its maintenance cost.
For cleaning and preparing the surface before painting, coating, metalworking.
It also used for making non-slipping surfaces and providing surface homogenization.
Shot blasting is done after heat treatment and also for mechanic descaling.
The shot blasting is done in two ways:
Wheel blasting: It is a common and economical method. In this process, the electric motor energy is converted into kinetic energy by rotating a turbine wheel. This is mostly used for treating heavy equipment. The turbine wheel works here as a centrifugal pump and it delivers the abrasive by centrifugal force on the surface.
Air blasting: In this method compressed is used and sprayed out through nozzles on the surface. This is mostly used for smaller equipment. Air blasting is comparatively expensive due to the use of steel frames and weldments.
After the process of shot blasting, shots are removed by the air washing process.
The shot blasting machine works on the projectile motion of an abrasive on the metal surface to get a better surface finish. So, this mechanical method depends on the abrasive. For this, mostly metal abrasive should be used.
Metal abrasives can provide the following benefits:
They can increase productivity by reducing maintenance costs.
Waste generation can be reduced to get better quality of work.
They cause less environmental pollution and also there is no risk to the operator’s health by using metal abrasive.
The main components of the shot blasting are:
Blast wheel: The efficiency of a shot blasting machine depends on the quality of wheels used. So one used to use a better quality of the wheel.
Cabinet: Cabinet consists of dust and abrasive. The shot blasting cabinet is made up of steel material to secure strength. A dust collector is mounted on the machine to prevent dust from entering the shop environment.
Work handling mechanism: Handling of parts depends on the quantity of the parts. Tumblast Shot Blasting Machines are used for large quantities and spinner hangers are used for heavier parts.
Elevator: After the metallic shots hit the surface they fall into the hopper under the machine from which the elevator carries them to the separator at the upper part of the machine.
Separator: The separator, separates contaminates, and the cleaned abrasive is fed into the shot turbine.
Dust collector: A dust collector system is used to release clean air. A properly designed and sized dust collector is preferred for shot blasting machines.
Control and instrumentation: The starting and stopping of all operations depend on the controls and instrumentation features of the shot blasting machines.
The shot blasting machine is mostly used in chemical industries, petroleum industries, Aerospace, Automobile industry, Heavy engineering industry, Railways, Defence.
We are the leading Manufacturer, Supplier, and Exporter of different kinds of Sand Blasting machines and blasting equipment, Shot Blasting Machines, Sand Blasting Cabinet, Shot Blasting Cabinet, pressure blasting cabinet, Shot Blasting Room, Automatic Sand Blasting Machine, thermal spray gun, Metalizing Gun in India at a low price for Sale.
Ps Balls | Ps Ball Manufacturer in India
From: sand blasting hopper
Ps Balls
It gives a perfect atomizing of elements size, density, hardness, and durability. Therefore, the effectiveness of abrasive reduces the consumption rate and increases productivity as well as non-toxic environment status. PS Ball is a cheap material when compared to other mineral substances. PS Ball can be reused up to 3-4 times based on its surface roughness.
Product Details:
Color: Black
State: Grains
Hardness: 7.5 mohs
Types of Cutting: Sand blasting
Density: 3.64 g/㎤
Fe2O3: 43.5%
SiO2: 19.5%
Ps Balls
PS Ball stands for Precious Slag Ball. PS Ball is the great product of the slag atomizing process. We named it precious since it is turned from valueless waste into newborn material with good value-added. It is an environment-friendly substance with a stable status of spinet structure by rapid air & mist cooling system, proven by professionals. PS Ball is designed by supercooling molten steel slag. it's an exciting and versatile product that's highly stable, hard, and extremely tough. Its superior features make it suitable for an outsized range of applications and its most typical usage is as an abrasive for the surface preparation of steel before the application of paint coatings. As PS Ball doesn't contain Free Silica, it's non-toxic and in compliance with environmental regulations the world over. As compared to copper slag, it's superior compressive strength, hardness, and anti-weathering characteristics.
Advantages of Ps Balls
Excellent hardness for blasting.
Improve the efficiency of work.
Less dust during the sand blasting machine work than silica or garnet.
Reuse available (2~3 times) by recycling equipment.
Good intensity of illumination.
Uses of Ps Balls
Abrasive Blasting Material.
Filter Media.
Casting Sand.
Weight Material.
Industrial Uses
Shipbuilding.
Steel Bridges.
Heavy Steel Structure.
Storage Tanks.
We provide steel shot, SS shot, copper slag, steel grit, garnet sand, quartz shot, aluminum oxide, glass beads, etc. We provide a large range of products and are checked on various parameters, such as density, physical and chemical properties, microstructure, hardness, durability. We are focused on our quality products and customer satisfaction.
Glass Beads | Glass Beads Manufacturer in India
From: sand blasting hopper
Glass beads
Glass beads mostly used in the abrasive blast cabinet. they are round in shape and smoothly cleans metal part with a smooth polish. pressure on which glass beads are blasted is 60-90 PSI to get the highest productivity result.
The appearance of Glass Beads are spherical and round . Glass Beads are available in all standard sizes. They are good for the environment and reliable. glass beads clean the surface without damaging them and they are recyclable. Glass Beads can perform a variety of operations. the dust level is also low and due to this reason, the cleanup maintenance is reduced. To get polished or smooth surface glass beads are shot on the surface of the object or work-piece under the pressure of compressed gas with high speed and after that, we will find a smooth and clean polished surface.
Uses of Glass Beads
Cleaning of Automotive parts.
Casting.
Deburring of rough edges.
Maintenance of Gears.
Applications
Metal preparation
surface finishing
We are a Manufacturer, Supplier, and Exporter of Sand Blasting Machine, Tumblast Shot Blasting Machine, Grit Blasting Machine, thermal spray gun, Sand Blasting Cabinet, Shot Blasting Room, Pressure blasting Cabinet, Metalizing Gun.