irecyclart
Drum Table Pallet Bench Set / Table Touret Et Ses Bancs
www.1001pallets.com/2016/12/drum-table-pallet-bench-set-t...
The Drum Table Pallet Bench Set is made from a large drum that I dismantled. I cut part of one side off to create the foot of the table, but turned those cut parts into a set of benches!
Drum Table Pallet Bench Set:
First, I cut one side off to create a smaller foot for the table out of the drum. Next, I turned those cut-off pieces into benches by using joists made from pallet wood that I half-lapped for strength. I added cross-bracing between the legs to keep the benches stable when wiggled side-to-side. Once assembled, I sanded it three times with grains 36, 80 and 120-grit. Next, I varnished it in 3 layers sanding between each coat with 240-grit paper. The benches are made from the drum cheeks. I sanded and finished the table in the same manner. This table set will seat 8 to 10 people comfortably! All the wood was upcycled/recycled. The only expenses are the hardware, the sandpaper, and the varnish, totaling about 80 euros.
La table est réalisée à partir d'un touret d'1m60 que j'ai démonté entièrement pour recouper une joue en guise de pieds.
Une fois remontée, je l'ai poncé 3 fois avec des grains 36, 80 et 120, puis vernis en 3 couches avec ponçage au grain 240 entre chaque couche.
Les bancs sont réalisés à partir d'une joue de touret d'1m90 que j'ai recoupé ; et avec des poutrelles de palettes à parpaings, j'y ai fait leurs pieds. Même traitement que pour la table en terme de ponçage et protection.
8 à 10 personnes peuvent s'y attabler!
Le tout est issu de récupération, les seuls dépenses sont la quincaillerie, le papier à poncer et le vernis, soit 80euros.
Drum Table Pallet Bench Set / Table Touret Et Ses Bancs
www.1001pallets.com/2016/12/drum-table-pallet-bench-set-t...
The Drum Table Pallet Bench Set is made from a large drum that I dismantled. I cut part of one side off to create the foot of the table, but turned those cut parts into a set of benches!
Drum Table Pallet Bench Set:
First, I cut one side off to create a smaller foot for the table out of the drum. Next, I turned those cut-off pieces into benches by using joists made from pallet wood that I half-lapped for strength. I added cross-bracing between the legs to keep the benches stable when wiggled side-to-side. Once assembled, I sanded it three times with grains 36, 80 and 120-grit. Next, I varnished it in 3 layers sanding between each coat with 240-grit paper. The benches are made from the drum cheeks. I sanded and finished the table in the same manner. This table set will seat 8 to 10 people comfortably! All the wood was upcycled/recycled. The only expenses are the hardware, the sandpaper, and the varnish, totaling about 80 euros.
La table est réalisée à partir d'un touret d'1m60 que j'ai démonté entièrement pour recouper une joue en guise de pieds.
Une fois remontée, je l'ai poncé 3 fois avec des grains 36, 80 et 120, puis vernis en 3 couches avec ponçage au grain 240 entre chaque couche.
Les bancs sont réalisés à partir d'une joue de touret d'1m90 que j'ai recoupé ; et avec des poutrelles de palettes à parpaings, j'y ai fait leurs pieds. Même traitement que pour la table en terme de ponçage et protection.
8 à 10 personnes peuvent s'y attabler!
Le tout est issu de récupération, les seuls dépenses sont la quincaillerie, le papier à poncer et le vernis, soit 80euros.