irecyclart
Pallet Bathroom Storage
www.1001pallets.com/2015/12/pallet-bathroom-storage/
What you need:
4 pallets (80x120cm,31,5x47,25in)
tape measure
saw, hammer, nails
screws, screwdriver
square brackets
abrasive paper
grinding machine
glaze, paint brush
caster wheels, handle
First step to take apart the 4 pallets
version A: help of hammer and chisel then remove all the rusty nails OR
version B: use an iron saw - faster but the rusty nails stay in the wood
After that choose 8 pieces of 80cm (31,5 in) slat. Then need 40 pieces of 40 cm (15,7 in) and 2 pieces of 33cm (13 in) slat too. You can saw the long - 120cm - slats in third and the other 80cm
slats in half.
The next step is polishing.
Cut a piece of abrasive paper - to the easy polishing use a small slat. But the even easier polishing use grinding machine :)
Join the part of the storage sides, front and top.
Leave 1,5cm (0,59 in) space by the top of the sides - it's approx. the thickness of a slat and place the 8 40cm slats well-proportioned. Then hammering nails into it in order to fix them.
Repeat it by the front - but here need only 5 40 cm slats and must saw the rest.
The top:
Need 4 slats 36cm (14,17 in) distance and here use the 2 slats, that earlier sawed. If you want
position handle on the top too, it looks good :)
For the bottom need 5 40cm (15,7in), for the inner side need 2 40cm (15,7in) and 2 13 cm (13in).
The next step is paint the surface of the parts with wood stain. We chose mahagony color, love it :) Wait till the parts dry completely (it depends on the wood stain).
Use square brackets to the joint - 3 pieces for each corner (for the front 2 is enough). For the inner slats also use square brackets.
Almost the last step clinch the 5 slats onto the bottom then position the caster wheels on it and fix them with screws.
Check the tutorial video, we hope will motivate you to "do it yourself". Have fun!
[embed]https://www.youtube.com/watch?v=gu8OWjvfuMg[/embed]
Pallet Bathroom Storage
www.1001pallets.com/2015/12/pallet-bathroom-storage/
What you need:
4 pallets (80x120cm,31,5x47,25in)
tape measure
saw, hammer, nails
screws, screwdriver
square brackets
abrasive paper
grinding machine
glaze, paint brush
caster wheels, handle
First step to take apart the 4 pallets
version A: help of hammer and chisel then remove all the rusty nails OR
version B: use an iron saw - faster but the rusty nails stay in the wood
After that choose 8 pieces of 80cm (31,5 in) slat. Then need 40 pieces of 40 cm (15,7 in) and 2 pieces of 33cm (13 in) slat too. You can saw the long - 120cm - slats in third and the other 80cm
slats in half.
The next step is polishing.
Cut a piece of abrasive paper - to the easy polishing use a small slat. But the even easier polishing use grinding machine :)
Join the part of the storage sides, front and top.
Leave 1,5cm (0,59 in) space by the top of the sides - it's approx. the thickness of a slat and place the 8 40cm slats well-proportioned. Then hammering nails into it in order to fix them.
Repeat it by the front - but here need only 5 40 cm slats and must saw the rest.
The top:
Need 4 slats 36cm (14,17 in) distance and here use the 2 slats, that earlier sawed. If you want
position handle on the top too, it looks good :)
For the bottom need 5 40cm (15,7in), for the inner side need 2 40cm (15,7in) and 2 13 cm (13in).
The next step is paint the surface of the parts with wood stain. We chose mahagony color, love it :) Wait till the parts dry completely (it depends on the wood stain).
Use square brackets to the joint - 3 pieces for each corner (for the front 2 is enough). For the inner slats also use square brackets.
Almost the last step clinch the 5 slats onto the bottom then position the caster wheels on it and fix them with screws.
Check the tutorial video, we hope will motivate you to "do it yourself". Have fun!
[embed]https://www.youtube.com/watch?v=gu8OWjvfuMg[/embed]