juli_cherry
coffe
How to make coffee beads from polymer clay using real coffee beans
1. Materials and tools:
-Polymer clay is chocolate brown
-Blade or knife to polymer clay
-Needle
-Coffee bean
The photo is not submitted:
- Grinding: fine-grained sandpaper, a soft cloth
- For painting: matt lacquer for plastics, alcohol or acetone, cotton swabs
2. Roll out sausage from polymer clay (not necessarily perfect). Cut into slices, bearing in mind that each of the two and then get the grain.
3. Carefully cut a piece of mash, form an ellipsoid. Cut in half, punctures on both sides of a needle or pin. Take into account that the needle is thinner than most pins, if the assembly provides for their use, puncture, a grain is better for them.
4. Pressed natural coffee bean to the workpiece. You can change the order of 3 and 4 - first press and then puncture.
5. Serving on the medial side of the grain holding the needle two curved or straight lines parallel to each other.
6. Loosens the space between the lines held, do "breaks" - a few lines across the spent grains from various sides.
7. If the texture is lost in the process, you can squeeze a natural grain of the workpiece - half to half.
8. "Fry" received coffee seeds in the oven according to instructions - 30 min. 110-130 degrees.
9. Polishing with emery paper reverse seeds, saving them from fingerprints. Polish with a cloth.
10. Degrease by wiping with a cotton swab with alcohol or acetone. Cover matt lacquer for plastics. Done!
I wish you success!
coffe
How to make coffee beads from polymer clay using real coffee beans
1. Materials and tools:
-Polymer clay is chocolate brown
-Blade or knife to polymer clay
-Needle
-Coffee bean
The photo is not submitted:
- Grinding: fine-grained sandpaper, a soft cloth
- For painting: matt lacquer for plastics, alcohol or acetone, cotton swabs
2. Roll out sausage from polymer clay (not necessarily perfect). Cut into slices, bearing in mind that each of the two and then get the grain.
3. Carefully cut a piece of mash, form an ellipsoid. Cut in half, punctures on both sides of a needle or pin. Take into account that the needle is thinner than most pins, if the assembly provides for their use, puncture, a grain is better for them.
4. Pressed natural coffee bean to the workpiece. You can change the order of 3 and 4 - first press and then puncture.
5. Serving on the medial side of the grain holding the needle two curved or straight lines parallel to each other.
6. Loosens the space between the lines held, do "breaks" - a few lines across the spent grains from various sides.
7. If the texture is lost in the process, you can squeeze a natural grain of the workpiece - half to half.
8. "Fry" received coffee seeds in the oven according to instructions - 30 min. 110-130 degrees.
9. Polishing with emery paper reverse seeds, saving them from fingerprints. Polish with a cloth.
10. Degrease by wiping with a cotton swab with alcohol or acetone. Cover matt lacquer for plastics. Done!
I wish you success!