Chrysler Concorde (1998)
The Concorde was completely redesigned for the 1998 model year. The new design was similar to the new Chrysler LHS, however the two models each had a unique front end shape and different rear fascias. The "Second Generation" design was introduced in 1996 as the Chrysler LHX Concept Car. This concept vehicle had large 20" wheels, and a centrally located instrument cluster. The wheelbase was expanded to 124 inches (3,100 mm) to allow for rear passenger supplement restraints, rear occupant entertainment center and storage compartment.
Despite overall length increasing by 7.5 inches (190 mm), the second generation's weight dropped by nearly a hundred pounds. This was achieved by extensive use of aluminum for the rear suspension, hood, as well as the two new engines. In addition the 214 hp (160 kW) 3.5-liter V6 engine, there was also a new 200 hp (149 kW) 2.7-liter V6 and 225 hp (168 kW) 3.2-liter V6. The 3.5-liter was redone and output upgraded to 253 hp (189 kW) and was available on the 2002-2004 Concorde Limited (formerly LHS).
Much was done in the design process to make the second generation LH sedans look more distinct from each other. The 1998 Concorde differed far greater from the Dodge Intrepid and the new 1999 Chrysler 300M (successor to the Eagle Vision), than did the first generation models. With the exception of the doors and roof, the Concorde shared little sheetmetal with the Intrepid and 300M. The new Concorde's front end was underscored by a striking full-width grille, relocated to the front bumper to give the impression of a bottom breather. Sweeping curves and a more rounded front end also helped set the Concorde apart from the Intrepid and 300M. The second generation Chrysler LHS had an appearance very similar to the Concorde; The only major differences being its more centrally located single frame grille and amber turn signals on the taillights.
As in the previous generation, six passenger seating with a front bench seat and column shifter was optional. Cloth seating was standard on base LX with leather seating optional. Leather was standard on upscale LXi and later Limited models.
The Concorde, 300M, and Intrepid were discontinued in 2004. The all-new Chrysler 300 replaced the Concorde (and 300M) in late 2004 as a 2005 model.
The Concorde 2nd generation replaced the first generation car (launched in 1991), itself derived from the AMC division Eagle Premier (and Dodge Monaco). Interestingly, these two AMC products were directly related to the then-new Renault 25 and inherited the Renault north-south installation of the powertrains, with the engine mounted ahead of, and driving, the front axle. This layout is very similar to that used in the larger Audis, thus permitting the installation of a all-wheel-drive system for added traction, though there were no volume models of either the AMC division cars, or the latter LHS platform Chryslers that used this system.
Notes on each of the aircraft Concorde and automotive Concorde are taken from excerpts published on Wikipedia.
The two models shown here, the Aérospatiale-BAC Concorde and the second generation Chrysler Corcorde have been designed in Lego. The aircraft in approximately 1:50 scale, and the car in miniland (1:21) scale for Flickr LUGNuts 79th Build Challenge, - "LUGNuts goes Wingnuts" - featuring automotive models named after, inspired by, or related to aircraft.
Chrysler Concorde (1998)
The Concorde was completely redesigned for the 1998 model year. The new design was similar to the new Chrysler LHS, however the two models each had a unique front end shape and different rear fascias. The "Second Generation" design was introduced in 1996 as the Chrysler LHX Concept Car. This concept vehicle had large 20" wheels, and a centrally located instrument cluster. The wheelbase was expanded to 124 inches (3,100 mm) to allow for rear passenger supplement restraints, rear occupant entertainment center and storage compartment.
Despite overall length increasing by 7.5 inches (190 mm), the second generation's weight dropped by nearly a hundred pounds. This was achieved by extensive use of aluminum for the rear suspension, hood, as well as the two new engines. In addition the 214 hp (160 kW) 3.5-liter V6 engine, there was also a new 200 hp (149 kW) 2.7-liter V6 and 225 hp (168 kW) 3.2-liter V6. The 3.5-liter was redone and output upgraded to 253 hp (189 kW) and was available on the 2002-2004 Concorde Limited (formerly LHS).
Much was done in the design process to make the second generation LH sedans look more distinct from each other. The 1998 Concorde differed far greater from the Dodge Intrepid and the new 1999 Chrysler 300M (successor to the Eagle Vision), than did the first generation models. With the exception of the doors and roof, the Concorde shared little sheetmetal with the Intrepid and 300M. The new Concorde's front end was underscored by a striking full-width grille, relocated to the front bumper to give the impression of a bottom breather. Sweeping curves and a more rounded front end also helped set the Concorde apart from the Intrepid and 300M. The second generation Chrysler LHS had an appearance very similar to the Concorde; The only major differences being its more centrally located single frame grille and amber turn signals on the taillights.
As in the previous generation, six passenger seating with a front bench seat and column shifter was optional. Cloth seating was standard on base LX with leather seating optional. Leather was standard on upscale LXi and later Limited models.
The Concorde, 300M, and Intrepid were discontinued in 2004. The all-new Chrysler 300 replaced the Concorde (and 300M) in late 2004 as a 2005 model.
The Concorde 2nd generation replaced the first generation car (launched in 1991), itself derived from the AMC division Eagle Premier (and Dodge Monaco). Interestingly, these two AMC products were directly related to the then-new Renault 25 and inherited the Renault north-south installation of the powertrains, with the engine mounted ahead of, and driving, the front axle. This layout is very similar to that used in the larger Audis, thus permitting the installation of a all-wheel-drive system for added traction, though there were no volume models of either the AMC division cars, or the latter LHS platform Chryslers that used this system.
Notes on each of the aircraft Concorde and automotive Concorde are taken from excerpts published on Wikipedia.
The two models shown here, the Aérospatiale-BAC Concorde and the second generation Chrysler Corcorde have been designed in Lego. The aircraft in approximately 1:50 scale, and the car in miniland (1:21) scale for Flickr LUGNuts 79th Build Challenge, - "LUGNuts goes Wingnuts" - featuring automotive models named after, inspired by, or related to aircraft.